scholarly journals The Response of Three Ficus benjamina Clones to Stress Imposed by Complete Darkness or Reduced Frequency of Watering at Two Temperatures

HortScience ◽  
1995 ◽  
Vol 30 (4) ◽  
pp. 835G-836
Author(s):  
N.S. Al-Khalifah ◽  
P.G. Alderson
Keyword(s):  
High Temperature ◽  
Shoot Length ◽  
The Other ◽  
Complete Darkness ◽  
Ficus Benjamina ◽  
Reduced Frequency ◽  
Two Temperatures ◽  
General Response ◽  
Shoot Quality

Three clones of Ficus benjamina showed different responses to stress imposed by placing them in complete darkness for 2 weeks. `Natasha' was the most affected, showing 75% leaf abscission and a reduction of 25% of the chlorophyll content of the leaves. `Cleo' was the least affected. A general response of the three clones was the reduction in the quality of plants and in their shoot length. Withholding water for periods of 5, 9, and 14 days resulted in no stress response of the three clones at 22 ± 1C, and they only dropped their leaves at 30 ± 1C with the percentage of leaves abscising in∼creasing with longer periods between watering. `Natasha' was an exception, and showed an increase in shoot quality and leaf expansion under the high temperature and dropped only 4% of its leaves while the other two clones dropped 20% to 30% with watering at intervals of 9 days. `Cleo' dropped 90% of its leaves when watered at intervals of 14 days at 30C.

Lightweight Aggregate Made of Desulfurized Fly Ash and Bottom Ash after Magnetic Separation

2012 ◽  
Vol 174-177 ◽  
pp. 1450-1454
Author(s):  
Yoo Taek Kim ◽  
Seung Gu Kang ◽  
Chang Sam Kim
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
Sintering Temperature ◽  
Raw Materials ◽  
Bottom Ash ◽  
Lightweight Aggregate ◽  
Core Region ◽  
The Other ◽  
Black Core

This research provides a comparison of ALAs which was made up of two different raw materials, that is, MDFA and MDBA which were produced from fluidized bed type boiler of power plant and then magnetically separated. ALAs made up of MDFA had too much liquid phase at high temperature; on the other hand, those made up of MDBA showed a black core region as well as good distribution of various sizes of pores inside ALA. Although a good quality of ALA can be made of MDBA only, the optimum composition was obtained under the conditions of MDBA:DS=5:5 and at 1200°C. Nonetheless for its high sintering temperature, MDBA is a prospective recycling material for making lightweight aggregate.

Immunoferritin localization of intracellular antigens in positively stained frozen sections

1978 ◽  
Vol 36 (2) ◽  
pp. 168-169
Author(s):  
K. T. Tokuyasu
Keyword(s):  
Surface Tension ◽  
Water Surface ◽  
Thin Layers ◽  
The Other ◽  
Positive Staining ◽  
Frozen Sections ◽  
The Past ◽  
Ultrathin Frozen Sections ◽  
Definition Of

During the past investigations of immunoferritin localization of intracellular antigens in ultrathin frozen sections, we found that the degree of negative staining required to delineate u1trastructural details was often too dense for the recognition of ferritin particles. The quality of positive staining of ultrathin frozen sections, on the other hand, has generally been far inferior to that attainable in conventional plastic embedded sections, particularly in the definition of membranes. As we discussed before, a main cause of this difficulty seemed to be the vulnerability of frozen sections to the damaging effects of air-water surface tension at the time of drying of the sections.Indeed, we found that the quality of positive staining is greatly improved when positively stained frozen sections are protected against the effects of surface tension by embedding them in thin layers of mechanically stable materials at the time of drying (unpublished).

PENERAPAN iLEARNING SURVEY (iSur) DALAM MENINGKATKAN KUALITAS SISTEM INFORMASI SELAMA PROSES PEMBELAJARAN DI PERGURUAN TINGGI RAHARJA

CCIT Journal ◽  
2014 ◽  
Vol 7 (3) ◽  
pp. 335-354
Author(s):  
Untung Rahardja ◽  
Muhamad Yusup ◽  
Ana Nurmaliana
Keyword(s):  
Higher Education ◽  
Student Satisfaction ◽  
Teaching And Learning ◽  
Online Survey ◽  
The Other ◽  
Learning Activities ◽  
Faculty Performance ◽  
Satisfaction Measurement ◽  
Valid Information

The accuracy and reliability is the quality of the information. The more accurate and reliable, the more information it’s good quality. Similarly, a survey, the better the survey, the more accurate the information provided. Implementation of student satisfaction measurement to the process of teaching and learning activities on the quality of the implementation of important lectures in order to get feedback on the assessed variables and for future repair. Likewise in Higher Education Prog has undertaken the process of measuring student satisfaction through a distributed questioner finally disemester each class lecture. However, the deployment process questioner is identified there are 7 (seven) problems. However, the problem can be resolved by the 3 (three) ways of solving problems one of which is a system of iLearning Survey (Isur), that is by providing an online survey to students that can be accessed anywhere and anytime. In the implementation shown a prototype of Isur itself. It can be concluded that the contribution Isur system can maximize the decision taken by the Higher Education Prog. By using this Isur system with questions and evaluation forms are submitted and given to the students and the other colleges. To assess the extent to which the campus has grown and how faculty performance in teaching students class, and can be used as a media Isur valid information for an assessment of activities throughout college.

PENGARUH KUALITAS PRODUK DAN RELIGIUSITAS TERHADAP KEPUTUSAN NASABAH PRODUK SIMPANAN PADA BSM CABANG PURWOKERTO

2017 ◽  
Vol 4 (1) ◽  
pp. 189-215
Author(s):  
Yoiz Shofwa Shafrani
Keyword(s):  
Regression Analysis ◽  
Product Quality ◽  
Linear Regression Analysis ◽  
Multiple Linear Regression Analysis ◽  
Analytical Tool ◽  
The Other ◽  
Financial Assets ◽  
Islamic Bank

Perkembangan dunia perbankan syariah tidak lepas dari peran para nasabah yang memberikan kepercayaan terhadap pihak perbankan untuk penyimpanan asset keuangannya. Faktanya banyak kelompok nasabah yang memutuskan untuk menjadi nasabah di perbankan syariah karena faktor religiusitasnya. Faktor lain yang dapat ikut mempengaruhi keputusan nasabah adalah kualitas produk. Di mana kualitas produk merupakan karakteristik yang melekat dari suatu produk. Kemungkinan yang terjadi bahwa kebanyakan nasabah pada perbankan syariah juga masih merupakan nasabah perbankan konvensional.Tujuan yang ingin dicapai dalam penelitian ini adalah untuk mengetahui pengaruh kualitas produk dan tingkat religiusitas nasabah terhadap keputusan nasabah untuk menyimpan dananya atau tidak di BSM Cabang Purwokerto. Alat analisis yang digunakan adalah analisis regresi linier berganda, dengan jumlah sampel 100 nasabah. Diperoleh hasil Y = 5,046 + 0,101X1 + 0,218X2. Berdasarkan uji F yang sudah dilakukan maka dapat diketahui bahwa variabel kualitas produk dan religiusitas secara bersama – sama berpengaruh terhadap keputusan nasabah untuk menyimpan dananya di BSM Cabang Purwokerto. Berdasarkan uji t yang sudah dilakukan dapat diketahui bahwa secara partial baik variabel kualitas produk maupun variabel religiusitas berpengaruh terhadap keputusan nasabah untuk menyimpan dananya di BSM Cabang Purwokerto. The progress of the Islamic bank cannot be separated from the role of its customers who give trust to the bank to deposit their financial assets. It is a fact many groups of customers decide to be the customers of the Islamic bank because of their religiosity. The other influences factor of a customer’s decision is the quality of the product. The aim of this research was to determine the effect of product quality and level of customers’ religiosity towards customers’ decision whether to keep their funds in Syariah Mandiri Bank, Branch of Purwokerto, or not. The analytical tool used was multiple linear regression analysis, with a sample of 100 customers. The results indicate Y = 5,046 + 0,101X1 + 0,218X2. Based on F, it can be seen that both variables of product quality and religiosity simultanously affect the customers’ decision to keep theirfunds in BSM Branch of Purwokerto. Based on t test, it can be seen that independently, either variable of product quality or variables of religiosityinfluences the customers’ decision to keep their funds in BSM Branch of Purwokerto.

INFLUENCE OF FORCED CONVECTION IN LIQUID INSIDE THE TIN ON DURATION OF STERILIZATION IN THE COURSE OF FISH PROCESSING

2017 ◽  
pp. 137-144
Author(s):  
Gennadiy Valentinovich Alexeev ◽  
Elena Igorevna Verboloz
Keyword(s):  
High Temperature ◽  
Liquid Phase ◽  
Forced Convection ◽  
Thermal Process ◽  
Processing Time ◽  
Fish Processing ◽  
Study Results ◽  
Equipment Modernization ◽  
Bottom To Top

The article focuses on the process of intensive mixing of liquid phase in the tin during high-temperature sterilization, i.e. sterilization when temperature of the heat carrier reaches 150-160°C. It has been stated that for intensification of the thermal process during sterilization of tinned fish with liquid filling it is preferable to turn a tin from bottom to top. This operation helps to increase the driving power of the process and to shorten warming time. Besides, high-temperature sterilization carried out according to experimental modes, where the number of tin turnovers is calculated, greatly shortens processing time and improves quality of the product. In this case there is no superheating, all tins are evenly heated. The study results will contribute to equipment modernization and to preserving valuable food qualities.

CREATING WALKING LED TRANSIT STATIONS FOR WOMEN IN MALAYSIA

2020 ◽  
Vol 7 (1) ◽  
pp. 99
Author(s):  
Yong Adilah Shamsul Harumain ◽  
Nur Farhana Azmi ◽  
Suhaini Yusoff
Keyword(s):  
Quality Of Life ◽  
Developing Countries ◽  
Public Transportation ◽  
Carbon Emission ◽  
The Other ◽  
Walking Distance ◽  
The Road ◽  
On The Road ◽  
Female User

Transit stations are generally well known as nodes of spaces where percentage of people walking are relatively high. The issue is do more planning is actually given to create walkability. Creating walking led transit stations involves planning of walking distance, providing facilities like pathways, toilets, seating and lighting. On the other hand, creating walking led transit station for women uncover a new epitome. Walking becomes one of the most important forms of mobility for women in developing countries nowadays. Encouraging women to use public transportation is not just about another effort to promote the use of public transportation but also another great endeavour to reduce numbers of traffic on the road. This also means, creating an effort to control accidents rate, reducing carbon emission, improving health and eventually, developing the quality of life. Hence, in this paper, we sought first to find out the factors that motivate women to walk at transit stations in Malaysia. A questionnaire survey with 562 female user of Light Railway Transit (LRT) was conducted at LRT stations along Kelana Jaya Line. Both built and non-built environment characteristics, particularly distance, safety and facilities were found as factors that are consistently associated with women walkability. With these findings, the paper highlights the criteria  which are needed to create and make betterment of transit stations not just for women but also for walkability in general.

Piemonte. Tra stasi e sperimentazioni, un quadro chiaroscurale / Piedmont. Between stasis and experimentations, a «chiaroscuro» framework

ARCHALP ◽  
2018 ◽  
pp. 66-75
Author(s):  
Antonio De Rossi ◽  
Roberto Dini
Keyword(s):  
Physical Space ◽  
The Other ◽  
Green Economy ◽  
Urban Centers ◽  
Mountain Areas ◽  
Architectural Production ◽  
New Meanings ◽  
The Alps ◽  
Contemporary Situation

The contemporary architectural production in the Alps of Piedmont has to be studied taking into consideration the contrasting phenomena of depopulation and tourism that have involved the mountain areas of the region during last century. In the fifties and sixties the percentage of abandonment of the high valleys reaches even 80-90%. Entire communities move to industrial urban centers in the cities on the plain. On the other side we witness to a strong polarization of the winter stations that become real “banlieues blanches” for the free time of the citizens and where the architecture of alpine modernism, with various forms, shapes. The paradox nowadays is that the rarefaction of abandoned and depopulated territories is necessary to force to start and choose new innovative paths. We witness a contemporary situation with different shades: on one side the well-established touristic territories that need projects to promote the redevelopment and diversification, on the other side the marginal places where are rising new visions are practices of reactivation of the territory in which architecture is fundamental. The topic of quality of the construction of the physical space intersects with the regeneration of places on a cultural basis, new agriculture and green economy, innovative development of the patrimony, sustainable tourism, with inclusive and participative paths of nature, by giving new meanings to places and building new economies and identities.

CLC 18.10LN

Alloy Digest ◽  
2006 ◽  
Vol 55 (1) ◽  
Keyword(s):  
Stainless Steel ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
High Temperature ◽  
Austenitic Stainless Steel ◽  
Stainless Steels ◽  
The Other ◽  
Low Carbon ◽  
Good Corrosion Resistance ◽  
Temperature Performance

Abstract CLC 18.10LN is an austenitic stainless steel with 18% Cr, 9.5% Ni, and 0.14% N to provide good corrosion resistance at strengths above the other low-carbon stainless steels. This datasheet provides information on composition, physical properties, elasticity, tensile properties, and shear strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as forming, machining, and joining. Filing Code: SS-950. Producer or source: Industeel USA, LLC.

EFEK PENAMBAHAN EKSTRAK AIR JAHE (Zingiber officinale Roscoe) DAN PENYIMPANAN DINGIN TERHADAP MUTU SENSORI IKAN TUNA (Thunnus albacores)

2010 ◽  
Vol 6 (1) ◽  
pp. 36
Author(s):  
Silvana Dinaintang Harikedua
Keyword(s):  
Sensory Quality ◽  
Zingiber Officinale ◽  
The Other ◽  
Ginger Extract ◽  
Other Hand ◽  
Storage Treatment ◽  
Zingiber Officinale Roscoe ◽  
Hedonic Scale ◽  
And Storage

The objective of this study was to investigate the effect of ginger extract addition and refrigerate storage on sensory quality of Tuna through panelist’s perception. Panelists (n=30) evaluated samples for overall appearance and flavor attribute using hedonic scale 1–7. The sample which is more acceptable by panelists on flavor attributes having 3% gingers extract and storage for 3 days. The less acceptable sample on flavor attribute having 0% ginger extract and storage for 9 days. On the other hand, the sample which is more acceptable by panelists on overall appearance having 0% ginger extract without storage treatment. The less acceptable sample on overall appearance having 3% ginger extract and storage for 9 days.

Temperature Effects during Endodormancy Induction on Subsequent Anthesis and Growth of Peach Trees

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 452c-452 ◽  
Author(s):  
Schuyler D. Seeley ◽  
Raymundo Rojas-Martinez ◽  
James Frisby
Keyword(s):  
Temperature Effects ◽  
Shoot Length ◽  
The Other ◽  
Nighttime Temperatures ◽  
Peach Trees ◽  
Better Than

Mature peach trees in pots were treated with nighttime temperatures of –3, 6, 12, and 18 °C for 16 h and a daytime temperature of 20 °C for 8 h until the leaves abscised in the colder treatments. The trees were then chilled at 6 °C for 40 to 70 days. Trees were removed from chilling at 40, 50, 60, and 70 days and placed in a 20 °C greenhouse under increasing daylength, spring conditions. Anthesis was faster and shoot length increased with longer chilling treatments. Trees exposed to –3 °C pretreatment flowered and grew best with 40 days of chilling. However, they did not flower faster or grow better than the other treatments with longer chilling times. There was no difference in flowering or growth between the 6 and 12 °C pretreatments. The 18 °C pretreatment resulted in slower flowering and very little growth after 40 and 50 days of chilling, but growth was comparable to other treatments after 70 days of chilling.

Sign in / Sign up

Export Citation Format

Share Document