scholarly journals Alterations in Anatomy and Ultrastructure of Pecan Leaves Treated with Propiconazole during Shoot Expansion

2002 ◽  
Vol 127 (1) ◽  
pp. 8-12 ◽  
Author(s):  
Hazel Y. Wetzstein ◽  
Elizabeth A. Richardson ◽  
Yi He
Keyword(s):  
Structural Changes ◽  
Leaf Expansion ◽  
Cellular Organization ◽  
Intercellular Spaces ◽  
Palisade Parenchyma ◽  
Carya Illinoensis ◽  
Mesophyll Cells ◽  
Transmission Electron ◽  
Spongy Layer ◽  
Anatomy And Ultrastructure

Propiconazole, a triazole fungicide, has been reported to inhibit leaf expansion in pecan [Carya illinoensis (Wangenh.) K. Koch] trees when applied under field conditions. This study was conducted to determine the effect of propiconazole on pecan leaf morphology and structure using light and transmission electron microscopy. Mature pecan trees were sprayed once or three times per week from budbreak to pollen maturity. Fungicide sprays resulted in significantly reduced leaf area. Compared to controls, leaves from propiconazole-treated shoots had alterations in cell arrangement characterized by more tightly packed palisade parenchyma cells with fewer intercellular spaces; neither leaf thickness nor palisade or spongy layer thickness were affected. Propiconazole caused modifications in the chloroplasts, with a tendency for internal membranes to be less defined, and for thylakiods to exhibit less stacking. The extent of structural changes was related to fungicide dosage. Results show that propiconazole applications during leaf development can inhibit leaf expansion and modify cellular organization of the mesophyll cells. Chemical name used: 1-[[2-(2,4-dichlorophenyl)-4-propyl-1,3-dioxolan-2-yl] methyl]-1H-1,2,4-triazole (propiconazole).

scholarly journals Comparative Study on Gas Exchange, Water Relations and Leaf Anatomy of Two Olive Cultivars Grown under Well-Irrigated and Drought Conditions

1999 ◽  
Vol 54 (9-10) ◽  
pp. 688-692 ◽  
Author(s):  
Konstantinos Chartzoulakis ◽  
Angelos Patakas ◽  
Artemis Bosabalidis
Keyword(s):  
Gas Exchange ◽  
Water Relations ◽  
Volume Fraction ◽  
Spongy Parenchyma ◽  
Intercellular Spaces ◽  
Palisade Parenchyma ◽  
Mesophyll Cells ◽  
Olive Cultivars ◽  
Olea Europea ◽  
Leaf Anatomical Characteristics

The effect of water stress on gas exchange, water relations and leaf anatomical characteristics have been studied in two olive cultivars (Olea europea, L. cv. ‘Koroneiki’ and cv. ‚Mastoidis’). Photosynthetic rate as well as stomatal conductance were decreased in stressed plants. Osmotic potential (π) declined rapidly in stressed plants indicating their ability for osmoregulation. Bulk modulus of elasticity (ε) was significantly higher in stressed compared to well irrigated plants. The volume fraction of intercellular spaces of the upper palisade parenchyma, the spongy parenchyma as well as the lower palisade parenchyma were significantly lower in stressed compared to well irrigated plants. On the other hand, the density of mesophyll cells in the upper palisade parenchyma, spongy parenchyma and lower palisade parenchyma increased significantly in stressed plants

scholarly journals Surface and Ultrastructural Feeding Injury to Strawberry Leaves by the Twospotted Spider Mite

HortScience ◽  
1990 ◽  
Vol 25 (8) ◽  
pp. 948-951 ◽  
Author(s):  
Richard J. Campbell ◽  
Randolph L. Grayson ◽  
Richard P. Marini
Keyword(s):  
Spider Mite ◽  
Leaf Surface ◽  
Twospotted Spider Mite ◽  
Fragaria Ananassa ◽  
Lower Leaf Surface ◽  
Palisade Parenchyma ◽  
Mesophyll Cells ◽  
Transmission Electron ◽  
Vascular Elements ◽  
Twospotted Spider

Scanning and transmission electron microscopy were used to investigate damage to strawberry (Fragaria ×ananassa Duch.) leaves caused by twospotted spider mite (Tetranychus urticae Koch.). Mites damaged epidermal cells on the lower leaf surface, but did not damage major vascular elements of the leaf. Mite-damaged spongy and palisade parenchyma cells had coagulated protoplasts, with some cells devoid of cellular contents. Mesophyll cells adjacent to damaged regions showed no ultrastructural distortion or disruption of chloroplasts.

Embedding Procedure for Water Swollen Samples

1970 ◽  
Vol 28 ◽  
pp. 504-505
Author(s):  
Ann M. Thomas ◽  
Virginia Shemeley
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ion Exchange ◽  
Structural Changes ◽  
Cross Linking ◽  
Ion Exchange Resins ◽  
Transmission Electron ◽  
First Pass ◽  
Exchange Resins

Those samples which swell rapidly when exposed to water are, at best, difficult to section for transmission electron microscopy. Some materials literally burst out of the embedding block with the first pass by the knife, and even the most rapid cutting cycle produces sections of limited value. Many ion exchange resins swell in water; some undergo irreversible structural changes when dried. We developed our embedding procedure to handle this type of sample, but it should be applicable to many materials that present similar sectioning difficulties.The purpose of our embedding procedure is to build up a cross-linking network throughout the sample, while it is in a water swollen state. Our procedure was suggested to us by the work of Rosenberg, where he mentioned the formation of a tridimensional structure by the polymerization of the GMA biproduct, triglycol dimethacrylate.

Anisotropic Membranes as Substrates for Sem

1976 ◽  
Vol 34 ◽  
pp. 444-445
Author(s):  
Thomas P. Turnbull ◽  
W. F. Bowers
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Flow ◽  
Polymer Chemistry ◽  
Surface Porosity ◽  
Transmission Electron ◽  
Pore Texture ◽  
Spongy Layer ◽  
Scanning Electron

Until recently the prime purposes of filters have been to produce clear filtrates or to collect particles from solution and then remove the filter medium and examine the particles by transmission electron microscopy. These filters have not had the best characteristics for scanning electron microscopy due to the size of the pores or the surface topography. Advances in polymer chemistry and membrane technology resulted in membranes whose characteristics make them versatile substrates for many scanning electron microscope applications. These polysulphone type membranes are anisotropic, consisting of a very thin (0.1 to 1.5 μm) dense skin of extremely fine, controlled pore texture upon a much thicker (50 to 250μm), spongy layer of the same polymer. Apparent pore diameters can be controlled in the range of 10 to 40 A. The high flow ultrafilters which we are describing have a surface porosity in the range of 15 to 25 angstrom units (0.0015-0.0025μm).

A Transmission Electron Microscopical Investigation of Phase Transformations in TiNi

1980 ◽  
Vol 38 ◽  
pp. 340-341
Author(s):  
P. Moine ◽  
G. M. Michal ◽  
R. Sinclair
Keyword(s):  
Electron Microscopy ◽  
Phase Transformations ◽  
Applied Stress ◽  
Structural Changes ◽  
Microscopical Investigation ◽  
Temperature Range ◽  
Transmission Electron ◽  
Electron Microscopical ◽  
Diffraction Effects ◽  
Microscopy Images

Premartensitic effects in near equiatomic TiNi have been pointed out by several authors(1-5). These include anomalous contrast in electron microscopy images (mottling, striations, etc. ),diffraction effects(diffuse streaks, extra reflections, etc.), a resistivity peak above Ms (temperature at which a perceptible amount of martensite is formed without applied stress). However the structural changes occuring in this temperature range are not well understood. The purpose of this study is to clarify these phenomena.

scholarly journals Coupled Investigation of Contact Potential and Microstructure Evolution of Ultra-Thin AlOx for Crystalline Si Passivation

Nanomaterials ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1803
Author(s):  
Zhen Zheng ◽  
Junyang An ◽  
Ruiling Gong ◽  
Yuheng Zeng ◽  
Jichun Ye ◽  
...  
Keyword(s):  
Structural Changes ◽  
Silicon Oxide ◽  
Crystalline Silicon ◽  
Contact Potential Difference ◽  
Potential Difference ◽  
Kelvin Probe ◽  
Contact Potential ◽  
Carrier Lifetimes ◽  
Transmission Electron ◽  
Effective Carrier

In this work, we report the same trends for the contact potential difference measured by Kelvin probe force microscopy and the effective carrier lifetime on crystalline silicon (c-Si) wafers passivated by AlOx layers of different thicknesses and submitted to annealing under various conditions. The changes in contact potential difference values and in the effective carrier lifetimes of the wafers are discussed in view of structural changes of the c-Si/SiO2/AlOx interface thanks to high resolution transmission electron microscopy. Indeed, we observed the presence of a crystalline silicon oxide interfacial layer in as-deposited (200 °C) AlOx, and a phase transformation from crystalline to amorphous silicon oxide when they were annealed in vacuum at 300 °C.

Structural changes in titanium dioxide nanocrystals during plastic deformation

2005 ◽  
Vol 38 (5) ◽  
pp. 749-756 ◽  
Author(s):  
Ulrich Gesenhues
Keyword(s):  
Structural Changes ◽  
Crystal Size ◽  
Lower Layer ◽  
High Energy ◽  
Primary Crystal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Hall Method ◽  
Means Of Transmission

The polygonization of 200 nm rutile crystals during dry ball-milling at 10gwas monitored in detail by means of transmission electron microscopy (TEM) and X-ray diffraction (XRD). The TEM results showed how to modify the Williamson–Hall method for a successful evaluation of crystal size and microstrain from XRD profiles. Macrostrain development was determined from the minute shift of the most intense reflection. In addition, changes in pycnometrical density were monitored. Accordingly, the primary crystal is disintegrated during milling into a mosaic of 12–35 nm pieces where the grain boundaries induce up to 1.2% microstrain in a lower layer of 6 nm thickness. Macrostrain in the interior of the crystals rises to 0.03%. The pycnometrical density, reflecting the packing density of atoms in the grain boundary, decreases steadily by 1.1%. The results bear relevance to our understanding of plastic flow and the mechanism of phase transitions of metal oxides during high-energy milling.

scholarly journals Structural Evolution in Wet Mechanically Alloyed Co-Fe-(Ta,W)-B Alloys

Metals ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 800
Author(s):  
Vladimír Girman ◽  
Maksym Lisnichuk ◽  
Daria Yudina ◽  
Miloš Matvija ◽  
Pavol Sovák ◽  
...  
Keyword(s):  
Structural Changes ◽  
Magnetic Measurements ◽  
Structural Evolution ◽  
High Energy ◽  
Control Agent ◽  
X Ray Diffraction ◽  
Mechanically Alloyed ◽  
X Ray ◽  
Transmission Electron ◽  
X Ray Absorption

In the present study, the effect of wet mechanical alloying (MA) on the glass-forming ability (GFA) of Co43Fe20X5.5B31.5 (X = Ta, W) alloys was studied. The structural evolution during MA was investigated using high-energy X-ray diffraction, X-ray absorption spectroscopy, high-resolution transmission electron microscopy and magnetic measurements. Pair distribution function and extended X-ray absorption fine structure spectroscopy were used to characterize local atomic structure at various stages of MA. Besides structural changes, the magnetic properties of both compositions were investigated employing a vibrating sample magnetometer and thermomagnetic measurements. It was shown that using hexane as a process control agent during wet MA resulted in the formation of fully amorphous Co-Fe-Ta-B powder material at a shorter milling time (100 h) as compared to dry MA. It has also been shown that substituting Ta with W effectively suppresses GFA. After 100 h of MA of Co-Fe-W-B mixture, a nanocomposite material consisting of amorphous and nanocrystalline bcc-W phase was synthesized.

Size dependent behavior of Fe3O4crystals during electrochemical (de)lithiation: an in situ X-ray diffraction, ex situ X-ray absorption spectroscopy, transmission electron microscopy and theoretical investigation

2017 ◽  
Vol 19 (31) ◽  
pp. 20867-20880 ◽  
Author(s):  
David C. Bock ◽  
Christopher J. Pelliccione ◽  
Wei Zhang ◽  
Janis Timoshenko ◽  
K. W. Knehr ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Structural Changes ◽  
Ex Situ ◽  
X Ray Diffraction ◽  
X Ray ◽  
Size Dependent ◽  
Transmission Electron ◽  
Dependent Behavior ◽  
X Ray Absorption

Crystal and atomic structural changes of Fe3O4upon electrochemical (de)lithiation were determined.

Mechanisms of Grain Growth in Free-Standing Nanograined Gold Thin Films

2005 ◽  
Vol 907 ◽  
Author(s):  
J. A. Gregg ◽  
K Hattar ◽  
C H Lei ◽  
I M Robertson
Keyword(s):  
Thin Films ◽  
Grain Growth ◽  
Structural Changes ◽  
Dislocation Slip ◽  
Free Standing ◽  
Transmission Electron ◽  
Enhanced Properties ◽  
Gold Thin Films ◽  
Annealing Experiments

AbstractRetention of the enhanced properties reported for nanograined metallic systems requires that the nanostructure be insensitive to temperature and deformation. In situ transmission electron microscopy annealing experiments were employed to investigate the structural changes associated with the formation of micron-sized grains in nanograined evaporated gold thin films. This abnormal grain growth occurs randomly throughout the film. Twinning but not dislocation slip occurs in the growing grains until the grain size is in the hundreds of nanometer range. The twins appear to hinder growth and for grain growth to continue the twins must either be annihilated or be able to grow with the grain concurrently.

Sign in / Sign up

Export Citation Format

Share Document