scholarly journals Adsorption characteristics of ciprofloxacin on the schorl: kinetics, thermodynamics, effect of metal ion and mechanisms

2017 ◽  
Vol 8 (3) ◽  
pp. 350-359 ◽  
Author(s):  
Danyang Yin ◽  
Zhengwen Xu ◽  
Jing Shi ◽  
Lili Shen ◽  
Zexiang He
Keyword(s):  
Photoelectron Spectroscopy ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ph Value ◽  
Physical Adsorption ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Abstract In this study, schorl was used as an effective adsorbent for ciprofloxacin removal from wastewater. The adsorption performance, mechanism and effect of metal ion on sorption were investigated. Adsorption capacity reached a maximum (8.49 mg/g) when the pH value was 5.5. The pseudo-second-order kinetic model and Freundlich model could better describe the experimental data. The negative ΔH (–22.96 KJ/mol) value showed that the adsorption process was exothermic. The results also indicated physical adsorption existed on the adsorption process, which was in agreement with the analysis of X-ray diffraction, scanning electron microscopy, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy. The desorption rate could reach 94%, which suggested that schorl had a good desorption and regeneration performance. Coexisting ions, such as Cu2+ and Al3+, could obviously inhibit adsorption, and the inhibition from Al3+ was significantly higher than that from Cu2+. However, the additional Zn2+ could slightly promote the adsorption.

scholarly journals Study on Adsorption Properties of Modified Corn Cob Activated Carbon for Mercury Ion

Energies ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4483
Author(s):  
Yuyingnan Liu ◽  
Xinrui Xu ◽  
Bin Qu ◽  
Xiaofeng Liu ◽  
Weiming Yi ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Physical Adsorption ◽  
Raw Material ◽  
Order Kinetic ◽  
Mercury Ions ◽  
Corn Cob ◽  
Adsorption Time ◽  
X Ray

In this study, corn cob was used as raw material and modified methods employing KOH and KMnO4 were used to prepare activated carbon with high adsorption capacity for mercury ions. Experiments on the effects of different influencing factors on the adsorption of mercury ions were undertaken. The results showed that when modified with KOH, the optimal adsorption time was 120 min, the optimum pH was 4; when modified with KMnO4, the optimal adsorption time was 60 min, the optimal pH was 3, and the optimal amount of adsorbent and the initial concentration were both 0.40 g/L and 100 mg/L under both modified conditions. The adsorption process conforms to the pseudo-second-order kinetic model and Langmuir model. Scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and Zeta potential characterization results showed that the adsorption process is mainly physical adsorption, surface complexation and ion exchange.

scholarly journals The Removal of Uranium and Thorium from Their Aqueous Solutions by 8-Hydroxyquinoline Immobilized Bentonite

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 626 ◽  
Author(s):  
Salah ◽  
Gaber ◽  
Kandil
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of uranium and thorium from their aqueous solutions by using 8-hydroxyquinoline modified Na-bentonite (HQ-bentonite) was investigated by the batch technique. Na-bentonite and HQ-bentonite were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) spectroscopy. Factors that influence the sorption of uranium and thorium onto HQ-bentonite such as solution pH, contact time, initial metal ions concentration, HQ-bentonite mass, and temperature were tested. Sorption experiments were expressed by Freundlich and Langmuir isotherms and the sorption results demonstrated that the sorption of uranium and thorium onto HQ-bentonite correlated better with the Langmuir isotherm than the Freundlich isotherm. Kinetics studies showed that the sorption followed the pseudo-second-order kinetic model. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the sorption of uranium and thorium onto HQ-bentonite was endothermic, feasible, spontaneous, and physical in nature. The maximum adsorption capacities of HQ-bentonite were calculated from the Langmuir isotherm at 303 K and were found to be 63.90 and 65.44 for U(VI) and Th(IV) metal ions, respectively.

Chromate sorption and reduction kinetics onto an aminated biosorbent

2006 ◽  
Vol 54 (10) ◽  
pp. 1-8 ◽  
Author(s):  
S. Deng ◽  
Y.P. Ting ◽  
G. Yu
Keyword(s):  
Photoelectron Spectroscopy ◽  
Penicillium Chrysogenum ◽  
Sorption Process ◽  
Sorption Kinetics ◽  
Order Kinetic ◽  
Chromium Species ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Amine Groups

A novel biosorbent was prepared by chemically grafting of polyethylenimine (PEI) onto the fungal biomass of Penicillium chrysogenum through a two-step reaction. The modified biosorbent is favorable for the removal of anionic Cr(VI) species from aqueous solution due to the protonation of amine groups on the biomass surface. The sorption capacity for Cr(VI) increased by 7.2-fold after surface modification. Sorption kinetics results show that the pseudo-second-order kinetic model described the experimental data well. During the sorption process, X-ray photoelectron spectroscopy (XPS) was used to analyze the chromium species on the biosorbent surface and the results indicate that part of the Cr(VI) ions were reduced to Cr(III) ions which can be chelated with the amine groups on the biomass surface. The reduced Cr(III) ions formed some aggregates on the surface at higher solution pHs.

scholarly journals Preparation and Characterization of a Novel Amidoxime-Modified Polyacrylonitrile/Fly Ash Composite Adsorbent and Its Application to Metal Wastewater Treatment

2022 ◽  
Vol 19 (2) ◽  
pp. 856
Author(s):  
Yan Sun ◽  
Xiaojun Song ◽  
Jing Ma ◽  
Haochen Yu ◽  
Gangjun Liu ◽  
...  
Keyword(s):  
Fly Ash ◽  
Adsorption Process ◽  
Single Layer ◽  
Nitrogen Adsorption ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
High Degree

The polyacrylonitrile/fly ash composite was synthesized through solution polymerization and was modified with NH2OH·HCl. The amidoxime-modified polyacrylonitrile/fly ash composite demonstrated excellent adsorption capacity for Zn2+ in an aqueous medium. Fourier transform-Infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption, X-ray diffraction, and scanning electron microscopy were used to characterize the prepared materials. The results showed that the resulting amidoxime-modified polyacrylonitrile/fly ash composite was able to effectively remove Zn2+ at pH 4–6. Adsorption of Zn2+ was hindered by the coexisting cations. The adsorption kinetics of Zn2+ by Zn2+ followed the pseudo-second order kinetic model. The adsorption process also satisfactorily fit the Langmuir model, and the adsorption process was mainly single layer. The Gibbs free energy ΔG0, ΔH0, and ΔS0 were negative, indicating the adsorption was a spontaneous, exothermic, and high degree of order in solution system.

scholarly journals Removal of Cesium and Strontium From Radioactive Wastewater by Prussian Blue Nanorods

2022 ◽  
Author(s):  
Chuqing Yao ◽  
Yaodong Dai ◽  
Shuquan Chang ◽  
Haiqian Zhang
Keyword(s):  
Prussian Blue ◽  
Photoelectron Spectroscopy ◽  
Adsorption Process ◽  
Maximum Adsorption Capacity ◽  
X Ray Diffraction ◽  
X Ray ◽  
Radioactive Wastewater ◽  
Pseudo Second Order ◽  
Co Precipitation ◽  
Solvothermal Methods

Abstract In this work, novel Prussian blue tetragonal nanorods were prepared by template-free solvothermal methods for removal of radionuclide Cs and Sr. It was worth that Prussian blue nanorods exhibited the better adsorption performance than co-precipitation PB or Prussian blue analogue composites. Thermodynamic analysis implied that adsorption process was spontaneous and endothermic which was described well with Langmuir isotherm and pseudo-second-order equation, the maximum adsorption capacity of PB nanorod was estimated to be 194.26 mg g-1 and 256.62 mg g-1 for Cs+ and Sr2+. The adsorption mechanism of Cs+ and Sr2+ was studied by X-ray photoelectron spectroscopy, X-ray diffraction and 57Fe Mössbaure spectroscopy, the results revealed that Cs+ entered in PB crystal to generate a new phase, the most of Sr2+ was trapped in internal crystal and the other exchanged Fe2+. Furthermore, the effect of co-existing ions and pH for PB adsorption process were also investigated. The results suggest that PB nanorods were outstanding candidate for removal of Cs+ and Sr2+ from radioactive wastewater.

scholarly journals Fabrication of Porous Hydroxyapatite Granules as an Effective Adsorbent for the Removal of Aqueous Pb(II) Ions

2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Duyen Thi Le ◽  
Thao Phuong Thi Le ◽  
Hai Thi Do ◽  
Hanh Thi Vo ◽  
Nam Thi Pham ◽  
...  
Keyword(s):  
Industrial Wastewater ◽  
Sintering Temperature ◽  
Order Kinetic ◽  
Sintering Process ◽  
X Ray Diffraction ◽  
Porous Hydroxyapatite ◽  
X Ray ◽  
Langmuir Adsorption ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Porous hydroxyapatite (HAp) granules have been successfully fabricated from a HAp powder precursor and polyvinyl alcohol (PVA) additive by a simple sintering process. The composition and microstructures of the HAp were characterized by X-ray diffraction (XRD) and scanning electron microscope (SEM) equipped with an energy dispersive X-ray (EDX) spectrometer. The effects of sintering temperature and PVA/HAp mass ratios on color, water stability, morphology, and chemical composition of HAp are discussed. Optimum conditions for the fabrication of HAp granules were found to be a PVA/HAp mass ratio of 3/20 and a sintering temperature of 600°C for 4 h. Accordingly, the obtained HAp is white in color, is in the granular form with a size of about 2 × 10 mm, and has a specific surface area of 70.6 m2/g. The adsorption of Pb2+ onto the as-prepared HAp granules was carried out in aqueous solution by varying the pH, the adsorbent dose, the initial concentration of Pb2+, and the contact time. The results of adsorption stoichiometry of Pb2+ on the HAp granule adsorbent were fitted to the Langmuir adsorption isotherm model (R2 = 0.99). The adsorption capacity and removal efficiency of the HAp granule adsorbent for Pb2+ under optimal conditions were found to be 7.99 mg/g and 95.92%, respectively. The adsorption process obeyed a pseudo-second-order kinetic model with R2∼1. The porous HAp granules studied in this work showed potential for the removal of Pb2+ from industrial wastewater.

Adsorption of Cu(II), Ni(II) and Zn(II) ions by nano kaolinite: Thermodynamics and kinetics studies

2019 ◽  
Author(s):  
Chem Int
Keyword(s):  
Metal Ions ◽  
Metal Ion ◽  
Adsorption Process ◽  
Ion Concentration ◽  
Order Kinetic ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir

An easy route for preparation emulsion of kaolinite (Al2Si2O5.4H2O) from Sweileh sand deposits, west Amman, Jordan by hydrochloric acid under continuous stirring for 4 h at room temperature was performed and nano kaolinite powder was used as an adsorbent for the removal of Cu(II), Zn(II) and Ni(II) ions. Nano kaolinite was characterized by XRD, FT-IR and SEM techniques. Effect of pH, adsorbent dose, initial metal ion concentration, contact time and temperature on adsorption process was examined. The negative values of ΔGo and the positive value of ΔHo revealed that the adsorption process was spontaneous and endothermic. The Langmuir isotherm model fitted well to metal ions adsorption data and the adsorption capacity. The kinetic data provided the best correlation of the adsorption with pseudo-second order kinetic model. In view of promising efficiency, the nano kaolinite can be employed for heavy metal ions adsorption.

Adsorption of Pb(II) on raw and organically modified Jordanian bentonite

Clay Minerals ◽  
2015 ◽  
Vol 50 (4) ◽  
pp. 485-496 ◽  
Author(s):  
I. Hamadneh ◽  
R. Abu-Zurayk ◽  
B. Abu-Irmaileh ◽  
A. Bozeya ◽  
A. H. Al-Dujaili
Keyword(s):  
Exchange Capacity ◽  
Second Order ◽  
Area Measurement ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Experimental Conditions ◽  
Modified Bentonite ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

AbstractA comparative study using bentonite (BT), hexadecyltrimethylammonium-modified bentonite (BT-HDTMA) and phenyl fatty hydroxamic acid-modified bentonite (BT-PFHA) as adsorbents for the removal of Pb(II) has been proposed. These adsorbents were characterized by X-ray diffraction, X-ray fluorescence, Fourier-transform infrared spectroscopy and surface area measurement. Cation exchange capacity was also determined in this study. The adsorbent capabilities for Pb(II) from aqueous solution were investigated, and the optimal experimental conditions including adsorption time, adsorbent dosage, the initial concentration of Pb(II), pH and temperature that might influence the adsorption performance were also investigated. The experimental equilibrium adsorption data were tested by four widely used two-parameter equations, the Langmuir, Freundlich, Dubinin- Radushkevich (D-R) and Temkin isotherms. The monolayer adsorption capacities of BT, BT-HDTMA and BT-PFHA for Pb(II) were 149.3, 227.3 and 256.4 mg/g, respectively. The experimental kinetic data were analysed by pseudo-first order, pseudo-second order and intraparticle diffusion kinetics models. The experimental data fitted very well with the pseudo-second order kinetic model. Determination of the thermodynamic parameters, ΔG, ΔH and ΔS showed the adsorption to be feasible, spontaneous and exothermic.

scholarly journals Removal of Pb(II) from aqueous solutions using Acacia Nilotica seed shell ash supported Ni0.5Zn0.5Fe2O4 magnetic nanoparticles

2016 ◽  
Vol 6 (4) ◽  
pp. 562-573 ◽  
Author(s):  
Farshad Omidvar-Hosseini ◽  
Farid Moeinpour
Keyword(s):  
Magnetic Nanoparticles ◽  
Low Cost ◽  
Acacia Nilotica ◽  
Environmentally Benign ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Monolayer Adsorption ◽  
Order Kinetic Model ◽  
Pseudo Second Order

Acacia Nilotica seed shell ash supported Ni0.5Zn0.5Fe2O4 magnetic nanoparticles were synthesized by a low-cost, simple, and environmentally benign procedure. The adsorbent was characterized by several methods including X-ray diffraction, scanning electron microscopy and Fourier transform infrared spectroscopy. Then, the potential of Acacia Nilotica seed shell ash supported Ni0.5Zn0.5Fe2O4 magnetic nanoparticles was investigated for adsorption of Pb(II). The effect of different parameters including contact time, pH, adsorbent dosage and initial Pb(II) concentration on the Pb(II) removal yield was studied. The experimental data were fitted well with the pseudo-second order kinetic model (R2 = 0.999). The adsorption isotherm was described well by the Langmuir isotherm (R2 = 0.900) with a maximum monolayer adsorption capacity of 37.6 mg g–1. The process for purifying water treatment presented here is easy using the magnetic nanoparticles. Therefore, this adsorbent was found to be useful and valuable for controlling water pollution due to Pb(II) ions.

scholarly journals The Preparation of Pd/Foam-Ni Electrode and Its Electrocatalytic Hydrodechlorination for Monochlorophenol Isomers

Catalysts ◽  
2018 ◽  
Vol 8 (9) ◽  
pp. 378 ◽  
Author(s):  
Junjing Li ◽  
Huan Wang ◽  
Liang Wang ◽  
Chang Ma ◽  
Cong Luan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Catalytic Performance ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Order Kinetic Model ◽  
Good Catalytic Activity ◽  
Promising Application

Noble metal palladium modified foamed nickel electrode (Pd/foam-Ni) was prepared by electrodeposition method. The fabricated electrode showed better catalytic performance than the Pd/foam-Ni prepared by conventional electroless deposition. The catalysts were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscopy (TEM). Electrocatalytic activity of the Pd/Ni was studied for the hydrodechlorination of monochlorophenol isomers. The Pd/Ni exhibited good catalytic activity for 3-chlorophenol (3-CP). Complete decomposition of chlorophenol isomers could be achieved within 2 h, and the hydrodechlorination process conformed to the pseudo-first-order kinetic model. It showed a supreme stability after recycling for 5 times. The Pd/Ni exhibited a promising application prospect with high effectiveness and low Pd loading.

Sign in / Sign up

Export Citation Format

Share Document