Experimental reedbed systems for the treatment of airport runoff

1997 ◽  
Vol 36 (8-9) ◽  
pp. 385-390 ◽  
Author(s):  
D. M. Revitt ◽  
R. B. E. Shutes ◽  
N. R. Llewellyn ◽  
P. Worrall
Keyword(s):  
Pilot Scale ◽  
Surface Flow ◽  
Pollutant Removal ◽  
Biological Processes ◽  
Metal Concentrations ◽  
Physical Chemical ◽  
Flow Systems ◽  
Total Ammonia ◽  
Removal Efficiencies

The relative efficiencies of pollutant removal from airport runoff by three different designs of pilot scale reedbed treatment systems located at Heathrow airport are described. The sub-surface flow and surface flow systems generally performed more effectively than the rafted systems for reduction of BOD, COD, total ammonia, nitrate, phosphate and metal concentrations. The variable removal efficiencies are explained in terms of the physical, chemical and biological processes which are relevant to each reedbed system.

Removal of Total Coliform and TSS for Hospital Wastewater by Optimizing the Role of Typha Angustifolia and Fine Sand-Gravel Media in Horizontal Sub Surface Flow Constructed Wetland

2021 ◽  
Vol 12 (1) ◽  
pp. 20-31
Author(s):  
Abdul Gani Akhmad
Keyword(s):  
Retention Time ◽  
Hydraulic Retention Time ◽  
Fine Sand ◽  
Pilot Scale ◽  
Total Coliform ◽  
Surface Flow ◽  
Pollutant Removal ◽  
Typha Angustifolia ◽  
Hospital Wastewater

This study aims to evaluate the performance of a pilot-scale HSSF-CW utilizing Typha angustifolia and fine sand-gravel media in removing total coliform and TSS from hospital wastewater. Three pilot-scale HSSF-CW cells measuring 1.00 x 0.45 x 0.35 m3 were filled with gravel sand media with a diameter of 5 - 8 mm as high as 35 cm with a submerged media depth of 0.30 m. There were three treatments, namely the first cell (CW1) without plants, the second cell (CW2) was planted with a density of 12 Typha angustifolia plants, and the third cell (CW3) was planted with a density of 24 Typha angustifolia plants. The three HSSF-CW cells received the same wastewater load with total coliform and TSS contents of 91000 MPN / 100 mg and 53 mg / L, respectively, with Hydraulic Loading Rates 3,375 m3 per day. Wastewater was recirculated continuously to achieve the equivalent HSSF-CW area requirement. The experimental results show that the performance of CW3 is more efficient than CW1 and CW2 in total coliform and TSS removal for hospital wastewater. The pollutant removal efficiency at CW3 reached 91.76% for total coliform with one day hydraulic retention time and 81.00% for TSS with two days of hydraulic retention time. This study concludes that the HSSF-CW system using sand-gravel media with a diameter of 5 - 8 mm with a submerged media depth of 0.30 m and planted with Typha angustifolia with a tighter spacing proved to be more efficient in removing total coliform and TSS from hospital wastewater.

Influence of polyphenols on low-loaded synthetic winery wastewater constructed wetland treatment with different plant speciesA paper submitted to the Journal of Environmental Engineering and Science.

2009 ◽  
Vol 36 (4) ◽  
pp. 690-700 ◽  
Author(s):  
J. Mena ◽  
R. Gómez ◽  
J. Villaseñor ◽  
A. de Lucas
Keyword(s):  
Analysis Of Variance ◽  
Oxygen Demand ◽  
Experimental Period ◽  
Pilot Scale ◽  
Lythrum Salicaria ◽  
Pollutant Removal ◽  
Synthetic Wastewater ◽  
Bulk Liquid ◽  
Wetland Treatment ◽  
Removal Efficiencies

Synthetic wastewaters simulating physically pre-treated low-loaded winery effluents were treated for four months with five pilot-scale horizontal subsurface flow constructed wetlands (HSSF-CWs) using different plants. Species under study were Phragmites australis (HSSF-CW2), Lythrum salicaria (HSSF-CW3), Cladium mariscus (HSSF-CW4), and Iris pseudacorus (HSSF-CW5). The designation HSSF-CW1 was not planted, and was used as a control. The mean dissolved oxygen and oxidation–reduction potential values in all HSSF-CWs indicated anaerobic conditions in the bulk liquid. High pollutant-removal efficiencies were obtained. Apparently, the species with higher growth (Phragmites, Lythrum, and particularly Iris) improved total nitrogen (TN) and nitrogen as ammonium (N-NH4+) removals, but adversely affected sulphate (SO42–) anaerobic reduction. Chemical oxygen demand (COD) removal efficiencies were high, although there were no clear indications how the kinds of plants might have influenced this parameter. A statistical analysis of variance indicated that only N-NH4+ removal efficiencies were statistically different owing to the influence of the different plants. In a second 6 month experimental period, polyphenols (13 mg L–1) were added to the synthetic wastewater to study possible inhibition effects. The addition of polyphenols did not seem to cause inhibition effects on COD, TN, and N-NH4+ removals, but clearly negatively affected SO42– removal. A new two-way analysis of variance confirmed that only SO42– removal was negatively affected by polyphenols, while the effects of the different plants were only significant for N-NH4+ removal. Polyphenols were nearly completely removed. First order rate constants obtained for COD, TN, SO42–, and polyphenol removals were similar to those reported by other authors.

The Microbiology Associated with Glycol Removal in Constructed Wetlands

1999 ◽  
Vol 40 (3) ◽  
pp. 99-107 ◽  
Author(s):  
S. Chong ◽  
H. Garelick ◽  
D. M. Revitt ◽  
R. B. E. Shutes ◽  
P. Worrall ◽  
...  
Keyword(s):  
Constructed Wetlands ◽  
Sewage Treatment ◽  
Dry Weight ◽  
Pilot Scale ◽  
Surface Flow ◽  
Alternative Methods ◽  
Surface System ◽  
Receiving Waters ◽  
Removal Efficiencies ◽  
Microbial Groups

During the winter months, the application of large quantities of glycol based anti- and de-icers to aircraft and runways poses a serious threat to receiving waters because of their toxicity and BOD effect. The orthodox approach has been to store runoff waters in aerated lagoons before discharge to receiving waters or to sewage treatment works. In the development of a pollution control strategy for Heathrow Airport Ltd. (HAL), a combination of alternative methods for treatment are being considered, and amongst these is the use of constructed wetlands on a pilot scale. Results from this study indicate that most constructed wetland plants and substrate micro-organism populations throughout the beds are not adversely affected by airport runoff or exposure to shock-loads of glycols at initial total concentrations of 1180mg/1 and 632mg/1 in the subsurface and surface flow reedbeds respectively. Apart from Typha spp, the aquatic macrophytes have adapted well to the exposure to airport runoff. Glycol removal efficiencies have improved as the beds have matured, and average removal efficiencies of 78% for the sub-surface system and 54% for the surface system have been recorded. Complimentary monitoring of substrate micro-organism populations prior to and after glycol dosings have shown that aerobic microbial groups of bacteria, fungi and actinomyctes, are present in higher numbers (105−107 CFU/g substrate dry weight) than their anaerobic counterparts (103−105 CFU/g substrate dry weight). In the laboratory, studies have shown fungi and bacteria to be most tolerant of glycol, with several strains able to utilise these compounds.

The effect of aeration and effluent recycling on domestic wastewater treatment in a pilot-plant system of duckweed ponds

2013 ◽  
Vol 69 (2) ◽  
pp. 350-357 ◽  
Author(s):  
Miriam Ben-shalom ◽  
Semion Shandalov ◽  
Asher Brenner ◽  
Gideon Oron
Keyword(s):  
Wastewater Treatment ◽  
Positive Impact ◽  
Oxygen Demand ◽  
Domestic Wastewater ◽  
Pilot Scale ◽  
Pollutant Removal ◽  
Domestic Wastewater Treatment ◽  
In Series ◽  
Removal Efficiencies ◽  
Effluent Recycling

Three pilot-scale duckweed pond (DP) wastewater treatment systems were designed and operated to examine the effect of aeration and effluent recycling on treatment efficiency. Each system consisted of two DPs in series fed by pre-settled domestic sewage. The first system (duckweed+ conventional treatment) was ‘natural’ and included only duckweed plants. The second system (duckweed aeration) included aeration in the second pond. The third system (duckweed+ aeration+ circulation) included aeration in the second pond and effluent recycling from the second to the first pond. All three systems demonstrated similarly efficient removal of organic matter and nutrients. Supplemental aeration had no effect on either dissolved oxygen levels or on pollutant removal efficiencies. Although recycling had almost no influence on nutrient removal efficiencies, it had a positive impact on chemical oxygen demand and total suspended solids removals due to equalization of load and pH, which suppressed algae growth. Recycling also improved the appearance and growth rate of the duckweed plants, especially during heavy wastewater loads.

The integration of constructed wetlands into a treatment system for airport runoff

2001 ◽  
Vol 44 (11-12) ◽  
pp. 469-476 ◽  
Author(s):  
D.M. Revitt ◽  
P. Worrall ◽  
D. Brewer
Keyword(s):  
Constructed Wetlands ◽  
Surface Runoff ◽  
Pilot Scale ◽  
Surface Flow ◽  
Pollutant Removal ◽  
Treatment System ◽  
Effluent Water ◽  
Surface Areas ◽  
Scale Surface ◽  
Surface Flow Constructed Wetlands

A new surface runoff treatment system has been designed for London Heathrow Airport, which incorporates separate floating constructed wetlands or reedbeds and sub-surface flow constructed wetlands as major pollutant removal systems. The primary requirement of the newly developed treatment system is to control the concentrations of glycols following their use as de-icers and anti-icers within the airport. The ability of reedbeds to contribute to this treatment role was fully tested through pilot scale, on-site experiments over a 2 year period. The average reductions in runoff BOD concentrations achieved by pilot scale surface flow and sub-surface flow reedbeds were 30.9% and 32.9%, respectively. The corresponding average glycol removal efficiencies were 54.2% and 78.3%, following shock dosing inputs. These treatment performances are used to predict the required full scale constructed wetland surface areas needed to attain the desired effluent water quality. The treatment system also incorporates aeration, storage and, combined with reedbed technology, has been designed to reduce a mixed inlet BOD concentration of 240 mg/l to less than 40 mg/l for water temperatures varying between 6°C and 20°C.

Rootzone dynamics in constructed wetlands receiving wastewater: a comparison of vertical and horizontal flow systems

1995 ◽  
Vol 32 (3) ◽  
pp. 281-290 ◽  
Author(s):  
Peter F. Breen ◽  
Alan J. Chick
Keyword(s):  
Plant Root ◽  
Surface Profile ◽  
Pilot Scale ◽  
Surface Flow ◽  
Root Density ◽  
Horizontal Flow ◽  
Quality Differentiation ◽  
Experimental Systems ◽  
Hydraulic Design ◽  
Flow Systems

Profile conditions were examined in both small experimental and pilot scale sub-surface flow wetlands. The study systems differed in their hydraulic design. The experimental systems had a vertical up-flow design whereas the pilot system was a horizontal flow trench design. Both systems were found to have significant physical, chemical and biological gradients within the sub-surface profile. System age and plant root density appear to be important factors in determining profile differentiation within the experimental systems. Root densities were found to be partitioned between the upper and lower layers on a 70%/30% split, respectively. However, in the experimental systems as the systems aged and root densities increased beyond 112-251 g.m−2 chemical water quality differentiation in the profile disappeared. Pilot scale systems were found to have physical gradients within the profile as evidenced by hydraulic short-circuiting. Vertical root density distribution is proposed as a major cause of this condition in horizontal flow systems.

Pilot Scale Testing of a New Radium-226 Removal Process

1985 ◽  
Vol 20 (2) ◽  
pp. 55-67
Author(s):  
W.B. Anderson ◽  
P.M. Huck ◽  
T.M.R. Meadley ◽  
T.P. Hynes
Keyword(s):  
Treatment Process ◽  
No Reduction ◽  
High Surface ◽  
High Surface Area ◽  
Barium Chloride ◽  
Pilot Scale ◽  
Activity Levels ◽  
New Process ◽  
Removal Efficiencies ◽  
New Treatment

Abstract This paper describes the on-going pilot scale development of a new treatment process designed to remove radium-226 from uranium milling effluents. Presently, decants from Canadian uranium mining and milling tailings areas are treated with barium chloride to remove radium-226 prior to discharge into the environment. This is usually accomplished in large natural or man-made ponds which provide an opportunity for a (Ba,Ra)SO4 precipitate to form and subsequently settle. Sand filtration is sometimes used as a polishing step. This new process differs from conventional and other experimental processes in that it involves the use of a fluidized bed to facilitate the deposition of a (Ba,Ra)SO4 precipitate on a granular medium of high surface area. As a stand-alone treatment process, the new process is consistently able to reduce incoming radium-226 activity levels by 90-99%. Effluent levels of 10 pCi/L (0.370 Bq/L) or less have been achieved, depending on the influent activity levels. Recent testing of the process as a polishing step has demonstrated radium removal efficiencies up to 60% when the process influent was already less than 5 pCi/L (0.185 Bq/L). The process has been operated at temperatures ranging from 26°C down to 0.3°C with no reduction in efficiency. In contrast to treatment times in the order of days for conventional settling pond systems and hours for mechanical stirred tank/filtration systems, the new process is able to achieve these radium removal efficiencies in times on the order of one minute.

scholarly journals Silver-Derived Antimicrobial Coatings for the Prevention of Microbial Biofilms in Metal Pipes

2021 ◽  
Vol 232 (8) ◽  
Author(s):  
M. Vela-Cano ◽  
C. Garcia-Fontana ◽  
F. Osorio ◽  
A. González-Martinez ◽  
J. González-López
Keyword(s):  
Biofilm Formation ◽  
Antimicrobial Properties ◽  
Pilot Scale ◽  
Biological Factors ◽  
Antimicrobial Coatings ◽  
Microbial Biofilms ◽  
Physical Chemical ◽  
Silver Zeolite ◽  
Metal Pipes ◽  
Pipeline Corrosion

AbstractBiodeterioration is one of the most important processes in metal pipeline corrosion, and it can be due to physical, chemical, and biological factors. Coatings rich in silver have been used to inhibit this undesirable phenomenon. In this study, the antimicrobial properties of several silver-containing products used as a coating in pipelines were determined on a pilot scale in order to evaluate the ability of silver to inhibit biofilm formation. The results showed that the coating with silver zeolite at a concentration of 2000 mg L–1 inhibited the formation of a microbial biofilm and prevented the biodeterioration process. Therefore, from our study, it can be concluded that silver zeolite shows greater protection capacity than other silver preparations and presents advantages in relation to other silver coatings that are currently available

Controlling chemical dosing for sulfide mitigation in sewer networks using a hybrid automata control strategy

2013 ◽  
Vol 68 (12) ◽  
pp. 2584-2590 ◽  
Author(s):  
Yiqi Liu ◽  
Ramon Ganigué ◽  
Keshab Sharma ◽  
Zhiguo Yuan
Keyword(s):  
Control Strategy ◽  
Control Method ◽  
Biological Processes ◽  
Control Performance ◽  
Hybrid Automata ◽  
Sewer Pipe ◽  
Physical Chemical ◽  
Iron Salts ◽  
Pumping Stations ◽  
Sewer Networks

Chemicals such as magnesium hydroxide (Mg(OH)2) and iron salts are widely used to control sulfide-induced corrosion in sewer networks composed of interconnected sewer pipe lines and pumping stations. Chemical dosing control is usually non-automatic and based on experience, thus often resulting in sewage reaching the discharge point receiving inadequate or even no chemical dosing. Moreover, intermittent operation of pumping stations makes traditional control theory inadequate. A hybrid automata-based (HA-based) control method is proposed in this paper to coordinate sewage pumping station operations by considering their states, thereby ensuring suitable chemical concentrations in the network discharge. The performance of the proposed control method was validated through a simulation study of a real sewer network using real sewage flow data. The physical, chemical and biological processes were simulated using the well-established SeweX model. The results suggested that the HA-based control strategy significantly improved chemical dosing control performance and sulfide mitigation in sewer networks, compared to the current common practice.

scholarly journals Post-treatment of tannery wastewater using pilot scale horizontal subsurface flow constructed wetlands (polishing)

2017 ◽  
Vol 77 (4) ◽  
pp. 988-998 ◽  
Author(s):  
Tadesse Alemu ◽  
Andualem Mekonnen ◽  
Seyoum Leta
Keyword(s):  
Removal Efficiency ◽  
Batch Reactor ◽  
Subsurface Flow ◽  
Oxygen Demand ◽  
Pilot Scale ◽  
Surface Flow ◽  
Tannery Wastewater ◽  
Treated Effluent ◽  
Horizontal Subsurface Flow ◽  
Pollutants Removal

Abstract In the present study, a pilot scale horizontal subsurface flow constructed wetland (CW) system planted with Phragmites karka; longitudinal profile was studied. The wetland was fed with tannery wastewater, pretreated in a two-stage anaerobic digester followed by a sequence batch reactor. Samples from each CW were taken and analyzed using standard methods. The removal efficiency of the CW system in terms of biological oxygen demand (BOD), chemical oxygen demand (COD), Cr and total coliforms were 91.3%, 90%, 97.3% and 99%, respectively. The removal efficiency for TN, NO3− and NH4+-N were 77.7%, 66.3% and 67.7%, respectively. Similarly, the removal efficiency of SO42−, S2− and total suspended solids (TSS) were 71.8%, 88.7% and 81.2%, respectively. The concentration of COD, BOD, TN, NO3−N, NH4+-N, SO42 and S2− in the final treated effluent were 113.2 ± 52, 56 ± 18, 49.3 ± 13, 22.75 ± 20, 17.1 ± 6.75, 88 ± 120 and 0.4 ± 0.44 mg/L, respectively. Pollutants removal was decreased in the first 12 m and increased along the CW cells. P. karka development in the first cell of CW was poor, small in size and experiencing chlorosis, but clogging was higher in this area due to high organic matter settling, causing a partial surface flow. The performance of the pilot CW as a tertiary treatment showed that the effluent meets the permissible discharge standards.

Sign in / Sign up

Export Citation Format

Share Document