Synthesis of carboxylated chitosan and its adsorption properties for cadmium (II), lead (II) and copper (II) from aqueous solutions

2009 ◽  
Vol 60 (2) ◽  
pp. 467-474 ◽  
Author(s):  
K. L. Lv ◽  
Y. L. Du ◽  
C. M. Wang
Keyword(s):  
Aqueous Solutions ◽  
Ph Value ◽  
Order Model ◽  
Adsorption Capacities ◽  
Kinetic Rates ◽  
Experimental Parameters ◽  
Exothermic Process ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data

Carboxylated chitosan (CKCTS) was prepared for the removal of Cd(II), Pb(II), and Cu(II) from aqueous solutions. The effects of experimental parameters such as pH value, initial concentration, contact time and temperature on the adsorption were studied. From the results we can see that the adsorption capacities of Cd(II), Pb(II), and Cu(II) increase with increasing pH of the solution. The kinetic rates were best fitted to the pseudo-second-order model. The adsorption equilibrium data were fitted well with the Langmuir isotherm, which revealed that the maximum adsorption capacities for monolayer saturation of Cd(II), Pb(II), and Cu(II) were 0.555, 0.733 and 0.827 mmol/g, respectively. The adsorption was an exothermic process.

scholarly journals Removal of Fluoride and Arsenate from Aqueous Solutions by Aluminum-Modified Guava Seeds

2018 ◽  
Vol 8 (10) ◽  
pp. 1807 ◽  
Author(s):  
Sarai Ramos-Vargas ◽  
Ruth Alfaro-Cuevas-Villanueva ◽  
Rafael Huirache-Acuña ◽  
Raúl Cortés-Martínez
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Equilibrium ◽  
Order Model ◽  
Freundlich Model ◽  
Equilibrium Time ◽  
Fluoride Adsorption ◽  
Batch Type ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data

The contamination of groundwater by arsenic and fluoride is a major problem worldwide, causing diseases in the population that uses these waters for their consumption. Therefore, the removal of these types of pollutants from groundwater is a very important issue. In this work, the removal of arsenate and fluoride from aqueous solutions by using aluminum-modified guava seeds (Al-GSs) was evaluated. Batch-type adsorption experiments were carried out with aqueous solutions of As(V) and F− and Al-GSs. The kinetic and equilibrium parameters of adsorption were determined, as well as the effects of adsorbent dose and pH. The adsorbent was characterized by scanning electron microscopy and infrared spectroscopy in order to determine its morphology and the functional groups present in the material. The results showed that hydroxyl and carboxyl are the main groups involved in the adsorption of As(V) and F−. The fluoride adsorption kinetics indicate that the equilibrium time was reached at 150 min and it can be described by the Lagergren model, while for As(V) the equilibrium time was lower (120 min) and the kinetic data were fitted well to the pseudo-second-order model. The Langmuir-Freundlich model can describe the adsorption equilibrium data in all cases. The fluoride adsorption capacity by Al-GS was 0.3445 mg/g, and for As(V) it was 4 mg/g. It can be established that the removal of arsenates and fluoride in Al-GSs is due to chemisorption on a heterogeneous surface.

scholarly journals Utilization to Remove Pb (II) Ions from Aqueous Environments Using Waste Fish Bones by Ion Exchange

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Bayram Kizilkaya ◽  
A. Adem Tekınay
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Mechanism ◽  
Cost Effective ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Fish Bones ◽  
Adsorption Capacities ◽  
Aqueous Environments ◽  
Equilibrium Data ◽  
Pseudo Second Order

Removal of lead (II) from aqueous solutions was studied by using pretreated fish bones as natural, cost-effective, waste sorbents. The effect of pH, contact time, temperature, and metal concentration on the adsorption capacities of the adsorbent was investigated. The maximum adsorption capacity for Pb (II) was found to be 323 mg/g at optimum conditions. The experiments showed that when pH increased, an increase in the adsorbed amount of metal of the fish bones was observed. The kinetic results of adsorption obeyed a pseudo second-order model. Freundlich and Langmuir isotherm models were applied to experimental equilibrium data of Pb (II) adsorption and the value ofRLfor Pb (II) was found to be 0.906. The thermodynamic parameters related to the adsorption process such asEa,ΔG°,ΔH°, andΔS° were calculated andEa,ΔH°, andΔS° were found to be 7.06, 46.01 kJ mol−1, and 0.141 kJ mol−1K−1for Pb (III), respectively.ΔH° values (46.01 kJmol−1) showed that the adsorption mechanism was endothermic. Weber-Morris and Urano-Tachikawa diffusion models were also applied to the experimental equilibrium data. The fish bones were effectively used as sorbent for the removal of Pb (II) ions from aqueous solutions.

scholarly journals Potential of granulated modified nanozeolites Y for MTBE removal from aqueous solutions: Kinetic and isotherm studies

2012 ◽  
Vol 14 (2) ◽  
pp. 1-8 ◽  
Author(s):  
S. Ghadiri ◽  
R. Nabizadeh ◽  
A. Mahvi ◽  
S. Nasseri ◽  
A. Mesdaghinia ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Methyl Tert Butyl Ether ◽  
Bet Surface Area ◽  
Promising Technique ◽  
Order Model ◽  
Butyl Ether ◽  
Sorption Data ◽  
Adsorption Capacities ◽  
Effective Performance ◽  
Pseudo Second Order

Potential of granulated modified nanozeolites Y for MTBE removal from aqueous solutions: Kinetic and isotherm studies Adsorption of methyl tert-butyl ether (MTBE) from aqueous solutions by granulated modified nanozeolites Y was investigated. Nanozeolite Y powders were converted into granulated zeolites and subsequently modified with two cationic surfactants (20 mmol/dm3), to be used as adsorbent. Granulated nanozeolites were characterized by BET surface area analysis, elemental analysis and X-ray diffractometer. -Hexade-cyltrimethylammonium (HDTMA-Cl) modified granulated zeolite had more effective performance than N-cetylpyridinium bromide (CPB) modified granulated zeolite. The most conventional adsorption isotherms and kinetic models were applied to describe MTBE adsorption and reaction dynamic, respectively. The equilibrium sorption data fitted the Langmuir 2 isotherm model and the kinetic study was followed the pseudo-second-order model. The maximum adsorption capacities for HDTMA-Cl modified zeolite and CPB modified granulated zeolite were 333.33 and 142.8 mg/g, respectively as calculated by the Langmuir model. This study demonstrated that the removal of mtbe by granulated modified nanozeolites Y is a promising technique.

Adsorption Equilibrium and Kinetics of Copper from Aqueous Solutions on Steel Slag

2011 ◽  
Vol 354-355 ◽  
pp. 33-36
Author(s):  
Jian Yun Li ◽  
Quan Xian Hua ◽  
Jun Ling Niu ◽  
Jian Wei Tang ◽  
Ke Xu
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Equilibrium ◽  
Steel Slag ◽  
Adsorption Rate ◽  
Batch Adsorption ◽  
Equilibrium And Kinetics ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data ◽  
Kinetics Of

The adsorption of copper in aqueous solutions by steel slag was studied in batch adsorption experiments. The adsorption equilibrium data fitted best with Langmuir and Freundlich equations. The adsorption was preferential type. A comparison of the kinetics models on the apparent adsorption rate showed that the adsorption system was best described by the pseudo-second-order kinetics. The adsorption rate was controlled by both liquid film diffusion and intraparticle dispersion.

Adsorption of Methylene Blue on Modified Bentonite

2013 ◽  
Vol 726-731 ◽  
pp. 2380-2383
Author(s):  
Li Xia Li ◽  
Xin Dong Zhai
Keyword(s):  
Methylene Blue ◽  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Freundlich Isotherm ◽  
Batch Process ◽  
Experimental Results ◽  
Order Model ◽  
Modified Bentonite ◽  
Equilibrium Data ◽  
Pseudo Second Order

Modified bentonite was used as adsorbent for the methylene blue adsorption in a batch process. Experimental results show that the adsorption kinetics is well described by pseudo-second-order model and the equilibrium data was better represented by the Freundlich isotherm model. The results revealed that the modified bentonite has the potential to be used as a good adsorbent for the removal of methylene blue from aqueous solutions.

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds

2014 ◽  
Vol 70 (1) ◽  
pp. 102-107 ◽  
Author(s):  
Caroline Trevisan Weber ◽  
Gabriela Carvalho Collazzo ◽  
Marcio Antonio Mazutti ◽  
Edson Luiz Foletto ◽  
Guilherme Luiz Dotto
Keyword(s):  
Aqueous Solutions ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Application Range ◽  
First Order ◽  
Adsorption Capacities ◽  
Effects Of Ph ◽  
Pseudo Second Order ◽  
Papaya Seeds

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180–200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g−1 for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

Adsorption Kinetics of Zn(II) from Aqueous Solutions onto Epichlorohydrin Crosslinked Chitosan

2012 ◽  
Vol 463-464 ◽  
pp. 7-11 ◽  
Author(s):  
Ming Yan Dang ◽  
Hong Min Guo ◽  
Yan Kun Tan
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Ph Value ◽  
Crosslinking Agent ◽  
Second Order ◽  
Order Model ◽  
Pseudo Second Order ◽  
Crosslinked Chitosan ◽  
Kinetics Of ◽  
Second Order Model

Chitosan was crosslinked using epichlorohydrin as crosslinking agent to prepare crosslinked chitosan which was used as an adsorbent for the removal of Zn(II) from aqueous solutions. The adsorption prosperities of Zn(II) on crosslinked chitosan were studied, including the influence of pH value and the adsorption kinetics. The kinetics of adsorption was discussed using two kinetic models, the pseudo first-order and the pseudo second-order model. Results reveal that the crosslinked chitosan is suitable as adsorbent to remove Zn(II) from dilute solution. The rate parameters for the Zn(II) by crosslinked chitosan were also determined. It was shown that the adsorption kinetics of Zn(II) could be best described by the pseudo second-order model and the adsorption process may involve a physical adsorption.

Adsorption Characters of Mn2+ onto Palygorskites Modified by 1, 10-Phenanthroline and Triethylamine

2010 ◽  
Vol 178 ◽  
pp. 8-16
Author(s):  
Liang Dong Feng ◽  
Bo Qing Chen ◽  
Ying Ying Shi ◽  
Ying Wei Guo ◽  
Jing Huang ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Contact Time ◽  
Ph Value ◽  
Order Model ◽  
Kinetics Of Adsorption ◽  
Initial Concentration ◽  
Adsorption Capacities ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Kinetics Of

1, 10-phenanthroline and triethylamine modified palygorskites were prepared by microwave irradiation, and characterized with FT-IR technique. The effects of contact time, adsorbent dosage, and pH value of the initial solution on the adsorption characters of Mn2+ were investigated. The adsorption of Mn2+ from aqueous solutions using 1, 10-phenanthroline or triethylamine modified palygorskites were investigated. Experiment results indicated that 1,10-phenanthroline and triethylamine molecules have been successfully grafted to palygorskite. The adsorption was rapid during the first 5 minuts and equilibrium were attained within 60 minutes in the initial concentration of Mn2+ of 50 and 100 mg•L-1, and fast adsorption in the first 10 minutes and slowly increased with the contact time due to the adsorption of palygorskite. The 1, 10-phenanthroline modified palygorskites had higher adsorption capacity than triethylamine modified palygorskites. Compared with natural palggorskites, the Mn2+ ions adsorption capacities of palggorskite modified by 1, 10-phenanthroline or triethylamine were significantly improved. There were less difference in the adsorption capacity between different dasages of 1, 10-phenanthroline modified palygorskites, but the adsorption capacity of Mn2+ adsorbed onto triethylamine modified palygorskites decreased with increasing the dosages. A Lagergren pseudo-second order model best described the kinetics of adsorption of Mn2+ onto the modified palygorskites.

scholarly journals Removal of cadmium and lead from aqueous solutions using iron phosphate-modified pollen microspheres as adsorbents

2021 ◽  
Vol 60 (1) ◽  
pp. 365-376
Author(s):  
Xiaoxing Zhang ◽  
Hui Liu ◽  
Jin Yang ◽  
Li Zhang ◽  
Binxia Cao ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Mechanism ◽  
Iron Phosphate ◽  
Sorption Kinetics ◽  
Order Model ◽  
Solution Ph ◽  
Adsorption Capacities ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Cadmium And Lead

Abstract Iron phosphate-modified pollen microspheres (pollen@FePO4) were prepared and applied as sorbents for the removal of heavy metals (Cd2+ and Pb2+) from the aqueous solution. Batch sorption studies were conducted to investigate the effects of solution pH, contact time, sorbent dosage, and metal concentration on the adsorption process. The sorption of Cd2+ and Pb2+ ions on pollen@FePO4 corresponds to the pseudo-second-order model and Langmuir isotherm, which is similar to the unmodified pollen. At pH 5.92, pollen@FePO4 offers maximum adsorption capacities of 4.623 and 61.35 mg·g−1 for Cd2+ and Pb2+, respectively. The faster sorption kinetics and higher adsorption capacities of Cd2+ and Pb2+ ions onto pollen@FePO4 than pollen indicates that it might be a promising material for the removal of heavy metal ions in aqueous solutions. The possible adsorption mechanism involves electrostatic and chemisorption for Cd2+ and mainly complexion for Pb2+.

scholarly journals COMPARISON OF STINGING NETTLE ADSORPTION PERFORMANCE TOWARDS ANIONIC AND CATIONIC DYES

2021 ◽  
Vol 55 (9-10) ◽  
pp. 1131-1142
Author(s):  
BENGÜ ERTAN ◽  
Keyword(s):  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Stinging Nettle ◽  
First Order ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data ◽  
Cr Uptake

Stinging nettle was used as lignocellulosic adsorbent for the removal of cationic dye – malachite green (MG), and anionic dye – Congo red (CR), from aqueous solution, without any chemical pretreatment. The adsorption equilibrium data fitted well with the Langmuir model for the adsorption of both dyes, with the calculated maximum adsorption capacity of 270.27 mgg-1 and 172.14 mgg-1 for MG and CR, respectively. The adsorption process was controlled by the pseudo-second-order model in the adsorption of MG and by the pseudo-first-order model in the adsorption of CR. The thermodynamics modelling displayed that the process was spontaneous and endothermic. The π–π electron–donor interaction, hydrogen bonds and pore diffusion may also be effective, besides electrostatic interaction between the adsorbate and the adsorbent in the mechanism of MG and CR uptake.

Sign in / Sign up

Export Citation Format

Share Document