scholarly journals Removal of cadmium and lead from aqueous solutions using iron phosphate-modified pollen microspheres as adsorbents

2021 ◽  
Vol 60 (1) ◽  
pp. 365-376
Author(s):  
Xiaoxing Zhang ◽  
Hui Liu ◽  
Jin Yang ◽  
Li Zhang ◽  
Binxia Cao ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Mechanism ◽  
Iron Phosphate ◽  
Sorption Kinetics ◽  
Order Model ◽  
Solution Ph ◽  
Adsorption Capacities ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Cadmium And Lead

Abstract Iron phosphate-modified pollen microspheres (pollen@FePO4) were prepared and applied as sorbents for the removal of heavy metals (Cd2+ and Pb2+) from the aqueous solution. Batch sorption studies were conducted to investigate the effects of solution pH, contact time, sorbent dosage, and metal concentration on the adsorption process. The sorption of Cd2+ and Pb2+ ions on pollen@FePO4 corresponds to the pseudo-second-order model and Langmuir isotherm, which is similar to the unmodified pollen. At pH 5.92, pollen@FePO4 offers maximum adsorption capacities of 4.623 and 61.35 mg·g−1 for Cd2+ and Pb2+, respectively. The faster sorption kinetics and higher adsorption capacities of Cd2+ and Pb2+ ions onto pollen@FePO4 than pollen indicates that it might be a promising material for the removal of heavy metal ions in aqueous solutions. The possible adsorption mechanism involves electrostatic and chemisorption for Cd2+ and mainly complexion for Pb2+.

scholarly journals Utilization to Remove Pb (II) Ions from Aqueous Environments Using Waste Fish Bones by Ion Exchange

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Bayram Kizilkaya ◽  
A. Adem Tekınay
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Mechanism ◽  
Cost Effective ◽  
Isotherm Models ◽  
Maximum Adsorption Capacity ◽  
Fish Bones ◽  
Adsorption Capacities ◽  
Aqueous Environments ◽  
Equilibrium Data ◽  
Pseudo Second Order

Removal of lead (II) from aqueous solutions was studied by using pretreated fish bones as natural, cost-effective, waste sorbents. The effect of pH, contact time, temperature, and metal concentration on the adsorption capacities of the adsorbent was investigated. The maximum adsorption capacity for Pb (II) was found to be 323 mg/g at optimum conditions. The experiments showed that when pH increased, an increase in the adsorbed amount of metal of the fish bones was observed. The kinetic results of adsorption obeyed a pseudo second-order model. Freundlich and Langmuir isotherm models were applied to experimental equilibrium data of Pb (II) adsorption and the value ofRLfor Pb (II) was found to be 0.906. The thermodynamic parameters related to the adsorption process such asEa,ΔG°,ΔH°, andΔS° were calculated andEa,ΔH°, andΔS° were found to be 7.06, 46.01 kJ mol−1, and 0.141 kJ mol−1K−1for Pb (III), respectively.ΔH° values (46.01 kJmol−1) showed that the adsorption mechanism was endothermic. Weber-Morris and Urano-Tachikawa diffusion models were also applied to the experimental equilibrium data. The fish bones were effectively used as sorbent for the removal of Pb (II) ions from aqueous solutions.

scholarly journals Potential of granulated modified nanozeolites Y for MTBE removal from aqueous solutions: Kinetic and isotherm studies

2012 ◽  
Vol 14 (2) ◽  
pp. 1-8 ◽  
Author(s):  
S. Ghadiri ◽  
R. Nabizadeh ◽  
A. Mahvi ◽  
S. Nasseri ◽  
A. Mesdaghinia ◽  
...  
Keyword(s):  
Aqueous Solutions ◽  
Methyl Tert Butyl Ether ◽  
Bet Surface Area ◽  
Promising Technique ◽  
Order Model ◽  
Butyl Ether ◽  
Sorption Data ◽  
Adsorption Capacities ◽  
Effective Performance ◽  
Pseudo Second Order

Potential of granulated modified nanozeolites Y for MTBE removal from aqueous solutions: Kinetic and isotherm studies Adsorption of methyl tert-butyl ether (MTBE) from aqueous solutions by granulated modified nanozeolites Y was investigated. Nanozeolite Y powders were converted into granulated zeolites and subsequently modified with two cationic surfactants (20 mmol/dm3), to be used as adsorbent. Granulated nanozeolites were characterized by BET surface area analysis, elemental analysis and X-ray diffractometer. -Hexade-cyltrimethylammonium (HDTMA-Cl) modified granulated zeolite had more effective performance than N-cetylpyridinium bromide (CPB) modified granulated zeolite. The most conventional adsorption isotherms and kinetic models were applied to describe MTBE adsorption and reaction dynamic, respectively. The equilibrium sorption data fitted the Langmuir 2 isotherm model and the kinetic study was followed the pseudo-second-order model. The maximum adsorption capacities for HDTMA-Cl modified zeolite and CPB modified granulated zeolite were 333.33 and 142.8 mg/g, respectively as calculated by the Langmuir model. This study demonstrated that the removal of mtbe by granulated modified nanozeolites Y is a promising technique.

Removal of hazardous pharmaceutical dyes by adsorption onto papaya seeds

2014 ◽  
Vol 70 (1) ◽  
pp. 102-107 ◽  
Author(s):  
Caroline Trevisan Weber ◽  
Gabriela Carvalho Collazzo ◽  
Marcio Antonio Mazutti ◽  
Edson Luiz Foletto ◽  
Guilherme Luiz Dotto
Keyword(s):  
Aqueous Solutions ◽  
Second Order ◽  
Isotherm Models ◽  
Order Model ◽  
Application Range ◽  
First Order ◽  
Adsorption Capacities ◽  
Effects Of Ph ◽  
Pseudo Second Order ◽  
Papaya Seeds

Papaya (Carica papaya L.) seeds were used as adsorbent to remove toxic pharmaceutical dyes (tartrazine and amaranth) from aqueous solutions, in order to extend application range. The effects of pH, initial dye concentration, contact time and temperature were investigated. The kinetic data were evaluated by the pseudo first-order, pseudo second-order and Elovich models. The equilibrium was evaluated by the Langmuir, Freundlich and Temkin isotherm models. It was found that adsorption favored a pH of 2.5, temperature of 298 K and equilibrium was attained at 180–200 min. The adsorption kinetics followed the pseudo second-order model, and the equilibrium was well represented by the Langmuir model. The maximum adsorption capacities were 51.0 and 37.4 mg g−1 for tartrazine and amaranth, respectively. These results revealed that papaya seeds can be used as an alternative adsorbent to remove pharmaceutical dyes from aqueous solutions.

Biosorption of Acid Dyes Using Modified Chitosan: Effect of Dye Structure, Hydrogen Bonding and PH

2011 ◽  
Vol 236-238 ◽  
pp. 464-469 ◽  
Author(s):  
Zuo Hua Wang ◽  
Bo Xiang ◽  
Zheng Zhai ◽  
Yi Jiu Li
Keyword(s):  
Hydrogen Bonding ◽  
Aqueous Solutions ◽  
Sorption Kinetics ◽  
Acid Dyes ◽  
Order Model ◽  
Modified Chitosan ◽  
Ph Influence ◽  
Pseudo Second Order ◽  
Acid Orange 10 ◽  
Acid Green 25

This work investigated sorption properties of diethylenetriamine derivative of chitosan (CTSN) for removal of acid dyes (Acid Green 25 (AG25), Acid Red 18 (AR18) and Acid Orange 10 (AO10)) from aqueous solutions. Sorption kinetics was firstly evaluated. It was found that pseudo-second-order model fits well with these dyes adsorbed on CTSN. Compared with normal chitosan, CTSN has higher capacity for AR18 and AO10, but a lower value for AG25. Mechanisms and interactions of dyes with CTSN were also discussed by study the effect of pH, influence of hydrogen-bonding and comparing the sorption capacities.

Synthesis of carboxylated chitosan and its adsorption properties for cadmium (II), lead (II) and copper (II) from aqueous solutions

2009 ◽  
Vol 60 (2) ◽  
pp. 467-474 ◽  
Author(s):  
K. L. Lv ◽  
Y. L. Du ◽  
C. M. Wang
Keyword(s):  
Aqueous Solutions ◽  
Ph Value ◽  
Order Model ◽  
Adsorption Capacities ◽  
Kinetic Rates ◽  
Experimental Parameters ◽  
Exothermic Process ◽  
Equilibrium Data ◽  
Pseudo Second Order ◽  
Adsorption Equilibrium Data

Carboxylated chitosan (CKCTS) was prepared for the removal of Cd(II), Pb(II), and Cu(II) from aqueous solutions. The effects of experimental parameters such as pH value, initial concentration, contact time and temperature on the adsorption were studied. From the results we can see that the adsorption capacities of Cd(II), Pb(II), and Cu(II) increase with increasing pH of the solution. The kinetic rates were best fitted to the pseudo-second-order model. The adsorption equilibrium data were fitted well with the Langmuir isotherm, which revealed that the maximum adsorption capacities for monolayer saturation of Cd(II), Pb(II), and Cu(II) were 0.555, 0.733 and 0.827 mmol/g, respectively. The adsorption was an exothermic process.

The removal of Cu(II) and Pb(II) ions from aqueous solutions by temperature-sensitive hydrogels based on N-isopropylacrylamide and itaconic acid

2021 ◽  
pp. 1-19
Author(s):  
Bengi Özkahraman ◽  
Eren Yıldırım ◽  
Serkan Emik ◽  
Işıl Acar
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Kinetics ◽  
Itaconic Acid ◽  
Competitive Adsorption ◽  
Adsorption Properties ◽  
Temperature Sensitive ◽  
Order Model ◽  
Ion Removal ◽  
Adsorption Capacities ◽  
Pseudo Second Order

This study deals with the potential use of poly(N-isopropylacrylamide-co-itaconic acid) temperature-sensitive hydrogels as an adsorbent for the removal of Cu(II) and Pb(II) ions from aqueous solutions. For this aim, the adsorption properties of hydrogels were examined by adsorption capacities, adsorption isotherm, and adsorption kinetics experiments. To describe the adsorption characteristics of hydrogels, the obtained experimental data were evaluated by Langmuir, Freundlich, Redlich-Peterson, and Dubinin-Radushkevich isotherm models. Adsorption kinetics experiments were carried out not only in single systems but also in binary systems where both ions were at equal initial concentrations for competitive adsorption studies. To predict the behaviors of the competitive and non-competitive adsorption process of ions onto hydrogels, the experimental adsorption data were analyzed by the pseudo-first-order model and the pseudo-second-order model. According to non-competitive ion removal findings, the adsorption capacities followed order Cu(II) >  Pb(II) for all hydrogels, and the pseudo-second-order kinetic model explained the adsorption properties of the hydrogels. Competitive ion removal studies showed that all hydrogels were selective to Cu(II) ion. Furthermore, in the case of comparative investigations both of competitive Cu(II) and competitive Pb(II) removal by hydrogels, the metal ion removal capacity of N10 hydrogel was found as a bit higher than that of N7.5 and N5 in 48 h. That is, as the acidic group content increased in the hydrogel network, the adsorption capacity values also increased. In addition, the reusability of temperature-sensitive hydrogels seems possible without regeneration or after regenerating with acid, in case the temperature is increased above the LCST. Furthermore, even if it cannot be reused, these hydrogels that retain metal ions reach very small volumes by shrinking when the LSCT is exceeded, and thus they can be eliminated more easily than other conventional gels due to their small size. As a result, this temperature-sensitive hydrogel may propose as an alternative environmentally friendly adsorbent candidate for can be used for water purification and wastewater treatment.

Magnetic nanocomposite beads: synthesis and uptake of Cu(II) ions from aqueous solutions

2015 ◽  
Vol 93 (3) ◽  
pp. 289-296 ◽  
Author(s):  
Al-Sayed A. Bakr ◽  
Yasser M. Moustafa ◽  
Mostafa M.H. Khalil ◽  
Mohamed M. Yehia ◽  
Eman A. Motawea
Keyword(s):  
Aqueous Solutions ◽  
Adsorption Capacity ◽  
Contact Time ◽  
Magnetic Nanocomposite ◽  
Order Model ◽  
Magnetic Iron Oxide Nanoparticles ◽  
Solution Ph ◽  
Pseudo Second Order ◽  
Uptake Process ◽  
Maximum Removal

Sodium alginate and magnetic iron oxide nanoparticles were combined to produce magnetic nanocomposite beads that were used for the removal of Cu(II) from aqueous solutions at a temperature of 25 °C and a stirring rate of 150 rpm. The different parameters affecting the adsorption capacity of the synthesized material such as contact time (30–270 min), pH (3–7), adsorbent dosage (5–10 g per 50 mL of wet beads), and initial Cu(II) concentration (50–450 mg/L) were investigated. Of all of the variables, the solution pH has the most significant effect on the adsorption capacity, particularly in the range of 4–6. Response surface methodology was used for modeling and optimizing the uptake process. While the experimental data were well described by the pseudo-second-order model, the adsorption isotherms were better fitted by the Langmuir equation. The results revealed that the maximum removal percentage was 92.6% from the initial Cu(II) concentration (150 mg/L) at pH 6, adsorbent dose (8.0 g/50 mL), and contact time (210 min). Therefore, the synthesized magnetic nanocomposite product could act as a highly effective nanoadsorbent in Cu(II) removal from the aqueous solutions.

scholarly journals Sawdust for the Removal of Heavy Metals from Water: A Review

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4318
Author(s):  
Elie Meez ◽  
Abbas Rahdar ◽  
George Z. Kyzas
Keyword(s):  
Heavy Metals ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Suitable Material ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
And Control ◽  
Environmental Agencies

The threat of the accumulation of heavy metals in wastewater is increasing, due to their abilities to inflict damage to human health, especially in the past decade. The world’s environmental agencies are trying to issue several regulations that allow the management and control of random disposals of heavy metals. Scientific studies have heavily focused on finding suitable materials and techniques for the purification of wastewaters, but most solutions have been rejected due to cost-related issues. Several potential materials for this objective have been found and have been compared to determine the most suitable material for the purification process. Sawdust, among all the materials investigated, shows high potential and very promising results. Sawdust has been shown to have a good structure suitable for water purification processes. Parameters affecting the adsorption mechanism of heavy metals into sawdust have been studied and it has been shown that pH, contact time and several other parameters could play a major role in improving the adsorption process. The adsorption was found to follow the Langmuir or Freundlich isotherm and a pseudo second-order kinetic model, meaning that the type of adsorption was a chemisorption. Sawdust has major advantages to be considered and is one of the most promising materials to solve the wastewater problem.

scholarly journals Husk of Agarwood Fruit-Based Hydrogel Beads for Adsorption of Cationic and Anionic Dyes in Aqueous Solutions

Molecules ◽  
2021 ◽  
Vol 26 (5) ◽  
pp. 1437
Author(s):  
Chih Ming Ma ◽  
Bo-Yuan Yang ◽  
Gui-Bing Hong
Keyword(s):  
Aqueous Solutions ◽  
Selective Adsorption ◽  
Order Model ◽  
Anionic Dyes ◽  
Adsorption Selectivity ◽  
Hydrogel Beads ◽  
Batch System ◽  
Initial Ph ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order

Hydrogel beads based on the husk of agarwood fruit (HAF)/sodium alginate (SA), and based on the HAF/chitosan (CS) were developed for the removal of the dyes, crystal violet (CV) and reactive blue 4 (RB4), in aqueous solutions, respectively. The effects of the initial pH (2–10) of the dye solution, the adsorbent dosage (0.5–3.5 g/L), and contact time (0–540 min) were investigated in a batch system. The dynamic adsorption behavior of CV and RB4 can be represented well by the pseudo-second-order model and pseudo-first-order model, respectively. In addition, the adsorption isotherm data can be explained by the Langmuir isotherm model. Both hydrogel beads have acceptable adsorption selectivity and reusability for the study of selective adsorption and regeneration. Based on the effectiveness, selectivity, and reusability of these hydrogel beads, they can be treated as potential adsorbents for the removal of dyes in aqueous solutions.

Kinetic Study of Methyl Orange Adsorption from Solution by IOCZ

2013 ◽  
Vol 684 ◽  
pp. 194-197
Author(s):  
Yi Ke Li ◽  
Bing Lu Zhao ◽  
Wei Xiao ◽  
Run Ping Han ◽  
Yan Qiang Li
Keyword(s):  
Methyl Orange ◽  
Contact Time ◽  
Adsorption Mechanism ◽  
Order Model ◽  
Initial Concentration ◽  
Pseudo Second Order ◽  
Adsorption From Solution ◽  
Adsorption Quantity ◽  
Regressive Analysis

The effect of contact time and the determination of the kinetic parameters of adsorption of methyl orange (MO) from aqueous solution onto Iron-Oxide-Coated-Zeolite (IOCZ) powder are important in understanding the adsorption mechanism. The effect of contact time on adsorption quantity was studied at different initial concentration and temperature, respectively. The pseudo-second-order model was adopted to fit the experimental data using non-linear regressive analysis and it was used to predict the adsorption behavior. The results showed that the process of adsorption MO was endothermic and chemisorption. The pore diffusion was not significant.

Sign in / Sign up

Export Citation Format

Share Document