AU Content in the MicroRNA Sequence Influences its Stability after Heat Treatment

MicroRNA ◽  
2019 ◽  
Vol 8 (3) ◽  
pp. 216-222 ◽  
Author(s):  
Agnès Garcias López ◽  
Louise Brogaard ◽  
Peter Mikail Helwag Heegaard ◽  
Susanna Cirera ◽  
Kerstin Skovgaard
Keyword(s):  
Heat Treatment ◽  
Lung Tissue ◽  
Nucleotide Composition ◽  
Rnase A ◽  
Enzyme Treatment ◽  
Mirna Sequence ◽  
Messenger Rnas ◽  
Blood Leukocytes ◽  
Rna Molecules ◽  
Before And After

Background: MicroRNAs (miRNAs) are short non-coding RNA molecules which regulate gene expression post-transcriptionally and are involved in a multitude of cellular processes. MiRNAs are known to be very stable compared to messenger RNAs (mRNAs), making them excellent candidates as biomarkers for disease. Recently, studies have suggested that miRNA stability in formalin fixed samples might depend on their nucleotide composition. Objective: To explore the stability of a panel of miRNAs isolated from porcine blood and lung tissue after heat and enzyme treatment. Method: Porcine RNA isolated from lung tissue and blood leukocytes was used for this study. RNA samples were exposed to heat treatment and RNAse A digestion. The levels of selected miRNAs were measured by means of qPCR before and after heat and enzyme treatment. Results: Fourteen miRNAs were successfully analysed, and they were found to degrade differently after exposure to heat or RNAse A. MiRNAs with <60% of adenine (A) and uracil (U) in their sequence were found to be more stable. Conclusion: This is the first study showing that different miRNAs isolated from lung tissue display unequal stability after heat treatment, probably based on their nucleotide composition, highlighting the importance of considering the miRNA sequence when investigating their value as biomarkers.

The Precipitation of Si in AlCuSi Thin Films

1973 ◽  
Vol 31 ◽  
pp. 34-35 ◽  
Author(s):  
R. M. Anderson
Keyword(s):  
Electron Microscopy ◽  
Thin Films ◽  
Heat Treatment ◽  
Solid Solution ◽  
Integrated Circuit ◽  
Copper Film ◽  
Solution Concentration ◽  
X Ray ◽  
Silicon Thin Films ◽  
Before And After

Aluminum-copper-silicon thin films have been considered as an interconnection metallurgy for integrated circuit applications. Various schemes have been proposed to incorporate small percent-ages of silicon into films that typically contain two to five percent copper. We undertook a study of the total effect of silicon on the aluminum copper film as revealed by transmission electron microscopy, scanning electron microscopy, x-ray diffraction and ion microprobe techniques as a function of the various deposition methods.X-ray investigations noted a change in solid solution concentration as a function of Si content before and after heat-treatment. The amount of solid solution in the Al increased with heat-treatment for films with ≥2% silicon and decreased for films <2% silicon.

Study of fine structure of cold-deformed steel 20 before and after prerecrystallization heat treatment

2015 ◽  
Vol 0 (1) ◽  
Author(s):  
Oleksandr M. Dubovyi ◽  
Oleksandr V. Chechel ◽  
Oleksandr O. Zhdanov
Keyword(s):  
Heat Treatment ◽  
Fine Structure ◽  
Before And After ◽  
Steel 20

Influence of the Zinc Sublayer Method Production and Heat Treatment on the Microhardness of the Composite Ni-Al2O3 Coating Deposited on the 5754 Aluminium Alloy

2014 ◽  
Vol 59 (1) ◽  
pp. 355-358
Author(s):  
M. Karaś ◽  
M. Nowak ◽  
M. Opyrchał ◽  
M. Bigaj ◽  
A. Najder
Keyword(s):  
Heat Treatment ◽  
Aluminium Alloy ◽  
Thermal Shock ◽  
Nickel Coating ◽  
Nickel Sulphate ◽  
Al2o3 Coating ◽  
Nickel Coatings ◽  
Watts Bath ◽  
Before And After ◽  
Zinc Interlayer

Abstract In this study, the effect of zinc interlayer on the adhesion of nickel coatings reinforced with micrometric Al2O3 particles was examined. Nickel coating was applied by electroplating on EN AW - 5754 aluminium alloy using Watts bath at a concentration of 150 g/l of nickel sulphate with the addition of 50 g/l of Al2O3. The influence of zinc intermediate coating deposited in single, double and triple layers on the adhesion of nickel coating to aluminium substrate was also studied. The adhesion was measured by the thermal shock technique in accordance with PN-EN ISO 2819. The microhardness of nickel coating before and after heat treatment was additionally tested. It was observed that the number of zinc interlayers applied does not significantly affect the adhesion of nickel which is determined by thermal shock. No defect that occurs after the test, such as delamination, blistering or peeling of the coating was registered. Microhardness of the nickel coatings depends on the heat treatment and the amount of zinc in the interlayer. For both single and double zinc interlayer, the microhardness of the nickel coating containing Al2O3 particles increased after heat treatment, but decreased when a triple zinc interlayer was applied.

scholarly journals The Interface Zone of Explosively Welded Titanium/Steel after Short-Term Heat Treatment

2021 ◽  
Author(s):  
Marcin Szmul ◽  
Katarzyna Stan-Glowinska ◽  
Marta Janusz-Skuza ◽  
Agnieszka Bigos ◽  
Andrzej Chudzio ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Intermetallic Phase ◽  
Welding Process ◽  
Carbon Diffusion ◽  
Sharp Interface ◽  
High Plasticity ◽  
Interface Zone ◽  
Before And After ◽  
Wavy Interface ◽  
The Waves

AbstractThis work presents a detailed description of a bonding zone of explosively welded Ti/steel clads subjected to stress relief annealing, applied in order to improve the plasticity of the final product. The typical joint formed by the welding process possesses a characteristic wavy interface with melted regions observed mainly at the crest regions of waves. The interface of Ti/steel clads before and after annealing was previously investigated mostly in respect to the melted regions. Here, a sharp interface between the waves was analyzed in detail. The obtained results indicate that the microstructure of a transition zone of that area is different along the width. After the heat treatment at 600 °C for 1.5 hours, titanium carbide (TiC) together with α-Fe phase forms at the interface in local areas of relatively wide interlayer (~ 1 µm), while for most of the sharp interface, a much thinner zone up to about 400 nm, formed by four sublayers containing intermetallic phase and carbides, is present. This confirms that carbon diffusion induced by applied heat treatment significantly influences the final microstructure of the Ti/steel interface zone. Side bending tests confirmed high plasticity of welds after applied heat treatment; however, the microhardness measurements indicated that the strengthening of the steel in the vicinity of the interface had not been removed completely.

Microstructure and Mechanical Properties of Ti-6Al-4V Manufactured by SLM

2015 ◽  
Vol 651-653 ◽  
pp. 677-682 ◽  
Author(s):  
Anatoliy Popovich ◽  
Vadim Sufiiarov ◽  
Evgenii Borisov ◽  
Igor Polozov
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Phase Composition ◽  
Mechanical Behavior ◽  
Ductile Fracture ◽  
Elevated Temperatures ◽  
Initial Material ◽  
Laser Melting ◽  
Microstructure And Mechanical Properties ◽  
Before And After

The article presents results of a study of phase composition and microstructure of initial material and samples obtained by selective laser melting of titanium-based alloy, as well as samples after heat treatment. The effect of heat treatment on microstructure and mechanical properties of specimens was shown. It was studied mechanical behavior of manufactured specimens before and after heat treatment at room and elevated temperatures as well. The heat treatment allows obtaining sufficient mechanical properties of material at room and elevated temperatures such as increase in ductility of material. The fractography of samples showed that they feature ductile fracture with brittle elements.

Modification of Hydrogen Zeolite with CeO2 and its Catalysis Application for Preparing Aspirin

2014 ◽  
Vol 809-810 ◽  
pp. 884-889
Author(s):  
Zhen Tan ◽  
Hui Ying Chen ◽  
Bi Hao Lan ◽  
Xiang Wen Tong ◽  
Xiao Mei Ba
Keyword(s):  
Heat Treatment ◽  
Calcination Temperature ◽  
Catalytic Efficiency ◽  
Optimal Conditions ◽  
Calcination Time ◽  
Zeolite Framework ◽  
High Efficient ◽  
Zeolite Particle ◽  
Before And After ◽  
Impregnation Temperature

Hydrogen zeolite was modified with CeO2 by impregnation - filtration - heat treatment. Hydrogen-zeolite samples before and after modification were characterized by XRD and SEM. The catalytic efficiency of modified hydrogen-zeolite was investigated. Such modification conditions were explored: as the CeO2 percentage, calcination temperature, calcination time, impregnation temperature. The results show that the optimal CeO2 percentage is 0.5%, calcination temperature is 600°C, calcination time is 2h, impregnation temperature is 75°C. The aspirin yield reaches 78.3% under the optimal conditions, compared with that (64.8%) catalyzed by sulfuric acid and that (70.4%) catalyzed by unmodified zeolite. XRD, SEM characterizations show that Ce ions can be doped into the zeolite framework. And the modification makes the zeolite particle size become smaller, which is reduced to 50.5nm from 56.76nm. A high efficient and eco-enviromently catalyst was got by modification.

The Phase Analysis of Panzhihua Vanadic Titanomagnetite Ore before and after Heat Treatment

2013 ◽  
Vol 807-809 ◽  
pp. 2110-2114
Author(s):  
Shu Quan Wan ◽  
De Jun Lan ◽  
Hong Bo Han ◽  
Cai Long Zhou
Keyword(s):  
Heat Treatment ◽  
Phase Analysis ◽  
Room Temperature ◽  
Before And After

The phases of Panzhihua vanadic titanomagnetite ore were studied by using XRF and XRD. XRF results show that the original ore mainly contain the elements, Fe, Ti, Si, Ca, Al, S, Mg, P, Mn, V and etc. XRD results show that the main substances in original ore were Fe3O4 and FeTiO3, and the minor phases cannot be clearly studied by XRD. After heat treatment for 10h at 573K in atmospheric ambient, the phases of the ore have been slightly changed. And after heat treatment for 10h at 1073K in atmospheric ambient, then cooled for 48h to room temperature, the main phases of the ore have almost been changed to Fe2O3 and Fe2TiO5.

Exoelectron emission from unexcited metallic glasses Fe78B13Si9 during heat treatment

1992 ◽  
Vol 7 (6) ◽  
pp. 1396-1399 ◽  
Author(s):  
Yoshihisa Watanabe ◽  
Tadayoshi Kubozoe ◽  
Yoshikazu Nakamura
Keyword(s):  
Heat Treatment ◽  
Metallic Glasses ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Exoelectron Emission ◽  
Radiation Chemical ◽  
Temperature Range ◽  
High Vacuum Condition ◽  
Before And After ◽  
Ultra High Vacuum Condition

Exoelectron emission from the surface of unexcited metallic glasses Fe78B13Si9 during heat treatment has been studied under ultra high vacuum condition. In the first heating cycle, exoelectrons are emitted from the as-cast ribbon in the temperature range from approximately 423 K to 773 K (150 °C to 500 °C), although the surface of the specimen is not excited by ionizing radiation, chemical processes, or mechanical treatments prior to measurements. In the second and subsequent heating cycles, however, there is no anomalous emission observed in the same temperature range. In order to elucidate the mechanism of emission, the surface of the specimen is observed by the atomic force microscope (AFM) before and after measurements. In the AFM image, many crystallites in the amorphous matrix can be found in the surface of the heated specimen. These experimental results show that exoelectrons are emitted in the same temperature range as the early stages of crystallization on the surface of metallic glasses. We hypothesize that the two effects are correlated.

scholarly journals Characterization and Prebiotic Potential of Longan Juice Obtained by Enzymatic Conversion of Constituent Sucrose into Fructo-Oligosaccharides

Molecules ◽  
2018 ◽  
Vol 23 (10) ◽  
pp. 2596 ◽  
Author(s):  
Yongxia Cheng ◽  
Haibo Lan ◽  
Lei Zhao ◽  
Kai Wang ◽  
Zhuoyan Hu
Keyword(s):  
Soluble Sugar ◽  
Monosaccharide Composition ◽  
Water Soluble ◽  
Lactobacillus Delbrueckii ◽  
Soluble Solids ◽  
Enzyme Treatment ◽  
Bacteria Growth ◽  
Before And After ◽  
Soluble Polysaccharide

The prebiotic potential of longan juice obtained by a commercial Viscozyme L for conversion of constituent sucrose to fructo-oligosaccharide was investigated. The physicochemical properties and carbohydrate composition of the longan juice was evaluated before and after enzymatic treatment. The stimulation effects of the treated longan juice on probiotic bacteria growth were also studied in vitro. The results showed that total soluble solids, yield and clarity of longan juice were all significantly improved after enzyme treatment. The water-soluble polysaccharide content, including pectin, was significantly increased. Compared with the natural longan pulp, the enzyme treated juice showed a significant decrease in sucrose content. Substantial fructo-oligosaccharides including 1-kestose and nystose were synthesized after enzyme treatment. The molecular weight distribution and the monosaccharide composition of the water-soluble polysaccharide were significantly changed by enzyme treatment. The treated longan juice and its ethanol-soluble sugar fraction promoted the growth of Streptococus thermophiles, Lactobacillus acidophilus and Lactobacillus delbrueckii, showing a good potential of the treated longan juice for producing functional foods and nutraceuticals.

scholarly journals Aerobic fermentation prior to pasteurization produces a selective substrate for cultivation of the mushroom Pleurotus pulmonarius

2019 ◽  
pp. 165-173
Author(s):  
Régulo Carlos Llarena-Hernández ◽  
Alejandro Alonso-López ◽  
Francisco Hernández-Rosas ◽  
Catalino J. López ◽  
Joaquín Murguía González ◽  
...  
Keyword(s):  
Heat Treatment ◽  
Thermophilic Bacteria ◽  
Trichoderma Viride ◽  
Paenibacillus Polymyxa ◽  
Barley Straw ◽  
Pleurotus Pulmonarius ◽  
Trichoderma Spp ◽  
Cultivable Bacteria ◽  
Before And After ◽  
Cultivation Substrate

Description of the subject. Pleurotus species are cultivated on lignocellulosic substrates, in which contaminant fungi such as Trichoderma spp. are common. A selective substrate for Pleurotus provides the necessary conditions for protection against contaminants. Studies show that Paenibacillus polymyxa and other thermophilic bacteria benefit from the selectivity of Pleurotus cultivation substrate, however, little is known regarding these bacterial communities. Objectives. To evaluate the effect of substrate inoculation with Paenibacillus polymyxa on the productivity of Pleurotus pulmonarius and its protection against Trichoderma. Method. Barley straw inoculated with P. polymyxa and non-inoculated straw (control) was used following 0, 3 or 5 days of fermentation prior to heat treatment in order to produce the cultivation substrate. The microbiological content before and after the heat treatment, the mycelial colonization by P. pulmonarius and Trichoderma viride in competition and the yield of P. pulmonarius were all evaluated. Results. We observed that inoculation with P. polymyxa increased the number of cultivable bacteria and changed the composition of the community. The inoculation decreased the colonization ability of T. viride and favored the mycelial growth, although the yield of mushrooms was affected. Higher yields of P. pulmomarius were obtained in the control substrate where no contamination of Trichoderma spp. was observed. Conclusions. Addition of P. polymyxa modified the natural microbiological succession in a fermentation of barley straw for 5 days, favoring the competitiveness of P. pulmonarius against T. viride. Fermentation of barley straw for 3 days, followed by heat treatment, benefits the yield and protection of P. pulmonarius against Trichoderma viride.

Sign in / Sign up

Export Citation Format

Share Document