Do not get me wrong, I need just self-healing time

2017 ◽  
Vol 02 (01) ◽  
Author(s):  
Hye Rim Lee ◽  
Eui Jun Jeong ◽  
Kong Jeon Young
Keyword(s):  
Author(s):  
Mingjun Hu ◽  
Daquan Sun ◽  
Tong Lu ◽  
Jianmin Ma ◽  
Fan Yu

Water damage often occurs on porous asphalt pavement during service life because of the well-developed pore structure. Determining the adhesion and adhesion healing properties of high-viscosity modified asphalt (HVMA) under water condition is beneficial to understand the water damage process of porous asphalt. In this study, the modified binder bond strength test was first conducted to investigate the adhesion property and self-healing behavior of HVMA at different conditions. Then, the surface energy test was carried out to further characterize the differences in adhesion property of HVMA. Moreover, the gel permeation chromatography test and fluorescence microscopic test were used to investigate the influence of chemical composition and polymer morphology on the adhesion property of HVMA. Results show that the presence of water reduces the adhesion property of HVMA. The addition of polymers leads to an increasing adhesion strength and a decreasing self-healing ability of HVMA. The self-healing ability of HVMA improves with the increase of temperature, but also shows a decreased trend when the healing time is long at high-temperature water immersion. The effect of polymers on the adhesion property of asphalt has two aspects. First, the swelling of polymers leads to an increasing content of polar heavy components in HVMA, thus enhancing polarity adsorption between asphalt and aggregate. Moreover, a polymer-centered interfacial diffusion layer can be formed during the adsorption of light components, which increases the overlapping area of structural asphalt between adjacent aggregates. This can also improve the adhesion property at the asphalt–aggregate interface.


Author(s):  
H R Williams ◽  
R S Trask ◽  
I P Bond

Design and certification of novel self-healing aerospace structures was explored by reviewing the suitability of conventional deterministic certification approaches. A sandwich structure with a vascular network self-healing system was used as a case study. A novel probabilistic approach using a Monte Carlo method to generate an overall probability of structural failure yields notable new insights into design of self-healing systems, including a drive for a faster healing time of less than two flight hours. In the case study considered, a mature self-healing system could be expected to reduce the probability of structural failure (compared to a conventional damage-tolerant construction) by almost an order of magnitude. In a risk-based framework this could be traded against simplified maintenance activity (to save cost) and/or increased allowable stress (to allow a lighter structure). The first estimate of the increase in design allowable stresses permitted by a self-healing system is around 8 per cent, with a self-healing system much lighter than previously envisaged. It is thought these methods and conclusions could have wider application to self-healing and conventional high-performance composite structures.


2013 ◽  
Vol 397-400 ◽  
pp. 1893-1896
Author(s):  
Zhong Hua Kong ◽  
Li Gang Wu ◽  
Zai Fei Luo

In the paper hybrid electrode capacitor self-healing circuit is simulated through ATP. It illustrates the equivalent circuit of self-healing is correct, so self-healing process can be analysised quantitatively. The results are that the smaller is the plasma resistance, the larger is self-healing waveform amplitude, The larger is the experimental capacitor, the longer is self-healing time.


Polymers ◽  
2018 ◽  
Vol 11 (1) ◽  
pp. 41 ◽  
Author(s):  
Ali Berkem ◽  
Ahmet Capoglu ◽  
Turgut Nugay ◽  
Erol Sancaktar ◽  
Ilke Anac

The self-healing ability can be imparted to the polymers by different mechanisms. In this study, self-healing polydimethylsiloxane-graft-polyurethane (PDMS-g-PUR)/Vanadium pentoxide (V2O5) nanofiber supramolecular polymer composites based on a reversible hydrogen bonding mechanism are prepared. V2O5 nanofibers are synthesized via colloidal route and characterized by XRD, SEM, EDX, and TEM techniques. In order to prepare PDMS-g-PUR, linear aliphatic PUR having one –COOH functional group (PUR-COOH) is synthesized and grafted onto aminopropyl functionalized PDMS by EDC/HCl coupling reaction. PUR-COOH and PDMS-g-PUR are characterized by 1H NMR, FTIR. PDMS-g-PUR/V2O5 nanofiber composites are prepared and characterized by DSC/TGA, FTIR, and tensile tests. The self-healing ability of PDMS-graft-PUR and composites are determined by mechanical tests and optical microscope. Tensile strength data obtained from mechanical tests show that healing efficiencies of PDMS-g-PUR increase with healing time and reach 85.4 ± 1.2 % after waiting 120 min at 50 °C. The addition of V2O5 nanofibers enhances the mechanical properties and healing efficiency of the PDMS-g-PUR. An increase of healing efficiency and max tensile strength from 85.4 ± 1.2% to 95.3 ± 0.4% and 113.08 ± 5.24 kPa to 1443.40 ± 8.96 kPa is observed after the addition of 10 wt % V2O5 nanofiber into the polymer.


2016 ◽  
Vol 113 ◽  
pp. 1029-1033 ◽  
Author(s):  
Jin Tang ◽  
Quantao Liu ◽  
Shaopeng Wu ◽  
Qunshan Ye ◽  
Yihan Sun ◽  
...  

PLoS ONE ◽  
2020 ◽  
Vol 15 (12) ◽  
pp. e0242494
Author(s):  
Aicha Boukthir ◽  
Jihene Bettaieb ◽  
Astrid C. Erber ◽  
Hind Bouguerra ◽  
Rym Mallekh ◽  
...  

Although non-fatal and mostly self-healing in the case of Leishmania (L.) major, cutaneous leishmaniasis (CL) is mainly treated to reduce lesion healing time. Less attention is paid to the improvement of scars, especially in aesthetically relevant areas of the body, which can dramatically affect patients’ wellbeing. We explored patients’ perspectives about treatment options and the social and psychological burden of disease (lesion and scar). Individual in-depth interviews were conducted with ten confirmed CL patients at two L. major endemic sites in Southern Tunisia (Sidi Bouzid and Gafsa). Participants were selected using a sampling approach along a spectrum covering e.g. age, sex, and clinical presentation. Patients’ experiences, opinions and preferences were explored, and their detailed accounts gave an insight on the impact of CL on their everyday lives. The impact of CL was found to be considerable. Most patients were not satisfied with treatment performance and case management. They expected a shorter healing time and better accessibility of the health system. Tolerance of the burden of disease was variable and ranged from acceptance of hidden scars to suicidal thoughts resulting from the fear to become handicapped, and the stress caused by close relatives. Some believed CL to be a form of skin cancer. Unexpectedly, this finding shows the big gap between the perspectives of patients and assumptions of health professionals regarding this disease. This study provided valuable information for better case management emphasizing the importance of improving communication with patients, and accessibility to treatment. It generated context-specific knowledge to policy makers in Tunisia to implement effective case management in a country where access to treatment remains a challenge due to socio-economic and geographic barriers despite a long tradition in CL control.


2021 ◽  
Vol 13 (9) ◽  
pp. 4834
Author(s):  
Xichen Sun ◽  
Jie Chen ◽  
Siyi Lu ◽  
Miaomiao Liu ◽  
Siyu Chen ◽  
...  

Ureolytic microbial-induced calcium carbonate precipitation (MICP) is a promising green technique for addressing sustainable building concerns by promoting self-healing mortar development. This paper deals with bacteria-based self-healing mortar under artificial seawater incubation for the sake of fast crack sealing with sufficient calcium resource supply. The ureolytic MICP mechanism was explored by morphology characterization and compositional analysis. With polyvinyl alcohol fiber reinforcement, self-healing mortar beams were produced and bent to generate 0.4 mm width cracks at the bottom. The crack-sealing capacity was evaluated at an age of 7 days, 14 days, and 28 days, suggesting a 1-week and 2-week healing time for 7-day- and 14-day-old samples. However, the 28-day-old ones failed to heal the cracks completely. The precipitation crystals filling the crack gap were identified as mainly vaterite with cell imprints. Moreover, fiber surface was found to be adhered by bacterial precipitates indicating fiber–matrix interfacial bond repair.


Biomimetics ◽  
2019 ◽  
Vol 4 (2) ◽  
pp. 36 ◽  
Author(s):  
Liang Zeng ◽  
Mingming Song ◽  
Jie Gu ◽  
Zhengyu Xu ◽  
Bin Xue ◽  
...  

Metal coordination bonds are widely used as the dynamic cross-linkers to construct self-healing hydrogels. However, it remains challenging to independently improve the toughness of metal coordinated hydrogels without affecting the stretchability and self-healing properties, as all these features are directly correlated with the dynamic properties of the same metal coordination bonds. In this work, using histidine–Zn2+ binding as an example, we show that the coordination number (the number of binding sites in each cross-linking ligand) is an important parameter for the mechanical strength of the hydrogels. By increasing the coordination number of the binding site, the mechanical strength of the hydrogels can be greatly improved without sacrificing the stretchability and self-healing properties. By adjusting the peptide and Zn2+ concentrations, the hydrogels can achieve a set of demanding mechanical features, including the Young’s modulus of 7–123 kPa, fracture strain of 434–781%, toughness of 630–1350 kJ m−3, and self-healing time of ~1 h. We anticipate the engineered hydrogels can find broad applications in a variety of biomedical fields. Moreover, the concept of improving the mechanical strength of metal coordinated hydrogels by tuning the coordination number may inspire the design of other dynamically cross-linked hydrogels with further improved mechanical performance.


Molecules ◽  
2019 ◽  
Vol 24 (19) ◽  
pp. 3597 ◽  
Author(s):  
Abend ◽  
Zechel ◽  
Schubert ◽  
Hager

For this paper, the self-healing ability of poly(methacrylate)s crosslinked via reversible urea bonds was studied in detail. In this context, the effects of healing time and temperature on the healing process were investigated. Furthermore, the impact of the size of the damage (i.e., area of the scratch) was monitored. Aging processes, counteracting the self-healing process, result in a decrease in the mechanical performance. This effect diminishes the healing ability. Consequently, the current study is a first approach towards a detailed analysis of self-healing polymers regarding the influencing parameters of the healing process, considering also possible aging processes for thermo-reversible polymer networks.


Sign in / Sign up

Export Citation Format

Share Document