scholarly journals Повышение эффективности полимерного нанокомпозита для формирования фотонных структур методом оптической записи

2020 ◽  
Vol 128 (10) ◽  
pp. 1512
Author(s):  
Ю.Э. Бурункова ◽  
Д. Альхалил ◽  
Д.С. Свяжина

In this work, the conditions for optimizing an optical recording material based on photosensitive acrylate-urethane nanocomposites with silicon oxide nanoparticles, for efficient Bragg gratings recording by multibeam interference method is presented. It was shown that the choice of the most effective monomers and their concentrations in the nanocomposite which depends on their structure and polymerization rate, followed by determination of the optimal recording radiation intensity for the given composition, makes it possible to adjust the conditions for component diffusion and redistribution, and hence, the formation of regions with different refractive indices in the recording medium. These results can be useful for creating complex 2D and 3D photonic structures based on the targeted modification of photosensitive polymer nanocomposites with different properties (luminescent, nonlinear optical, etc.).

2014 ◽  
Vol 56 (12) ◽  
pp. 1343-1346 ◽  
Author(s):  
A. A. Efimov ◽  
V. V. Ivanov ◽  
I. A. Volkov ◽  
A. A. Lizunova ◽  
S. V. Lisovskii ◽  
...  

2003 ◽  
pp. 42-49 ◽  
Author(s):  
E. Bushmin

The article is devoted to the analysis of improving budget process trends. The author offers the concept of "financial technologism". Its usage should promote an essential improvement of the budget process. The given concept is based on the fact that the regulation of budget procedure is the process of determination of "rules of the game", and the order of interaction of different institutions within the framework of the budget process, and the trends and volumes of expenses are the strategy of institutions. The procedure within the budget process plays a principal role as compared with the trends and volumes of public expenditures.


Author(s):  
Lea Christy Restu Kinasih ◽  
Dewi Fatimah ◽  
Veranica Julianti

The selection and determination of appropriate learning strategies can improve the results to be obtained from the application of classroom learning models. This writing aims to discipline students to develop individual abilities of students to be more active in the learning process and improve the quality of learning. The learning process in Indonesia in general only uses conventional learning models that make students passive and undeveloped. In order for the quality of learning to increase, the Team Assisted Individualization learning model is combined with the task learning and forced strategies. The Team Assisted Individualization cooperative learning model is one of the cooperative learning models that combines learning individually and in groups. Meanwhile, task and forced learning strategies are strategies that focus on giving assignments that require students to complete them on time so that the learning process can run effectively. Students are required to do assignments according to the given deadline. This makes students become familiar with the tasks given by the teacher. Combining or modifying the learning model of the assisted individualization team with forced and forced learning strategies is expected to be able to make students more active, disciplined, independent, creative in learning and responsible for the tasks assigned. Therefore this method of incorporation is very necessary in the learning process and can be applied to improve the quality of learning in schools.


2020 ◽  
Vol 0 (4) ◽  
pp. 43-51
Author(s):  
A. L. Vorontsov ◽  
◽  
I. A. Nikiforov ◽  

Formulae have been obtained that are necessary to calculate cumulative deformation in the process of straitened extrusion in the central area closed to the working end of the counterpunch. The general method of plastic flow proposed by A. L. Vorontsov was used. The obtained formulae allow one to determine the deformed state of a billet in any point of the given area. The formulae should be used to take into account the strengthening of the extruded material.


2020 ◽  
Vol 3 (9) ◽  
pp. 231-233
Author(s):  
AliyevSh.K. ◽  
TuychiyevI.U ◽  
Karimov N ◽  
Umaraliev.M.I

The article is focused on the data of the carried works on studying biological efficiency of fungi Triazole 50% on sowing the winter wheat against yellow rust as well as on the height, development and fertility of the wheat. On May 5, 2019 from 9 to 10 o’clock under the temperature 21-23 field experiments of Triazol 50% CS manufactured by the firm “Agroximstar” (Uzbekistan) were carried out on winter wheat as a protector of seeds of winter wheat of Pervitsa sort against the disease of yellow rustin the irrigated conditions in an experimental field of the Institute “Istiklal” of Andijan district of Andijan region. The aim of the given research is to study biological-farming efficiency and determination of optimal norms of preparation expenses and to study the influence of fungicide on the height and development as well as on the fertility of the wheat. The received data showed that the preparation Triazole 50% CS effected on the pathogen of yellow rust favorably and besides that it didn’t effect on seed growth and energy of growth negatively.


1979 ◽  
Vol 44 (7) ◽  
pp. 2064-2078 ◽  
Author(s):  
Blahoslav Sedláček ◽  
Břetislav Verner ◽  
Miroslav Bárta ◽  
Karel Zimmermann

Basic scattering functions were used in a novel calculation of the turbidity ratios for particles having the relative refractive index m = 1.001, 1.005 (0.005) 1.315 and the size α = 0.05 (0.05) 6.00 (0.10) 15.00 (0.50) 70.00 (1.00) 100, where α = πL/λ, L is the diameter of the spherical particle, λ = Λ/μ1 is the wavelength of light in a medium with the refractive index μ1 and Λ is the wavelength of light in vacuo. The data are tabulated for the wavelength λ = 546.1/μw = 409.357 nm, where μw is the refractive index of water. A procedure has been suggested how to extend the applicability of Tables to various refractive indices of the medium and to various turbidity ratios τa/τb obtained with the individual pairs of wavelengths λa and λb. The selection of these pairs is bound to the sequence condition λa = λ0χa and λb = λ0χb, in which b-a = δ = 1, 2, 3; a = -2, -1, 0, 1, 2, ..., b = a + δ = -1, 0, 1, 2, ...; λ0 = λa=0 = 326.675 nm; χ = 546.1 : 435.8 = 1.2531 is the quotient of the given sequence.


2001 ◽  
Author(s):  
Yagya D. Sharma ◽  
Laxman Singh ◽  
Promod K. Bhatnagar

2009 ◽  
Vol 156-158 ◽  
pp. 487-492 ◽  
Author(s):  
M.V. Zamoryanskaya

In this paper the new method for determination of luminescent centers concentration are discussed. While the possibility of electron traps determination and definition of its activation energy are suggested. The cathodoluminescent (CL) method was used. The determination of luminescent centers concentration in silicon oxide is based on the measurements of dependences of CL intensity on electron beam current. The presence and energy of activation of electron traps were studied by measurement of rise time and decay of luminescent band during the stationary irradiation of silica by electron beam.


Sign in / Sign up

Export Citation Format

Share Document