scholarly journals Implementasi Sistem Pengendali Rumah Pintar Menggunakan Laravel

2021 ◽  
Vol 1 (1) ◽  
Author(s):  
Laila Khoirunnisa Nurul Imani ◽  
Nanda Alicia ◽  
Fahmizal Fahmizal ◽  
Unan Yusmaniar Oktiawati
Keyword(s):  
Programming Language ◽  
Smart Home ◽  
Electronic Equipment ◽  
Test Results ◽  
Average Speed ◽  
Internet Connection ◽  
Rest Api ◽  
Internet Network

The control of household electronic equipment can now be done remotely using a website, or better known as the smart home controller application to reduce waste of electricity usage. The electronic equipment that is controlled changes the lights and sockets. This electronic equipment controller website is made with the Laravel framework which uses the PHP 5.8 programming language which is closed, therefore a connection is made with the REST API that uses the Javascript programming language to bridge the communication between electronic equipment and the website. Delivery of data between the website and components requires a server and broker to broker data paths. Thus MQTT is needed as a means of exchanging data on the hardware side so it requires a gateway in the form of Node Js to connect PHP with MQTT. Test results are done by testing the speed of the lights using various internet connection media. The test results showed the fastest internet connection media, namely using a laptop connected to a WiFi internet network with an average speed of 0.691 seconds. The smart home controller website named Pantaw can be accessed using the UGM hotspot WiFi network.Keywords: Website, smarthome, MQTT, Laravel, Node Js.

scholarly journals Kinerja Load Balancing dengan Menggunakan Metode Per Connection Classifier

2020 ◽  
Vol 4 (2) ◽  
pp. 124
Author(s):  
Denis Taslim ◽  
Iskandar Fitri ◽  
Rini Nuraini
Keyword(s):  
Load Balancing ◽  
Load Balance ◽  
Traffic Load ◽  
Test Results ◽  
Computer Laboratory ◽  
Internet Connection ◽  
Network Connections ◽  
Speed Up ◽  
Internet Network

The internet connection used in the computer laboratory must be protected from all kinds of interference. One way to do this is by means of Load balancing with the Per Connection Classifier (PCC) method. The research results show that the proposed load balancing technique becomes a balanced traffic load on each ISP or gateway so that bandwidth usage is more efficient and able to speed up internet network connections. It also proposes a failover technique to help reduce internet network connections where connection failures occur on one of the ISP lines. In testing and packet Loss and Throughput each 6 stages have been carried out. Namely with the results obtained from testing the Loss package 10, 20, 30, 40, 50, 60 minutes. For the throughput test results, namely by measuring from 10, 20, 30, 40, 50, 60 minutes. The test refers to the TIPHONE version.Keywords:ISP, Load Balance, Method PCC, Quality of service

EVALUASI ANR PADA TRANSMISI DATA NETWORK TERHADAP WP-REST API DALAM APLIKASI ANDROID

2018 ◽  
Vol 2 (1) ◽  
Author(s):  
Agung Riyadi
Keyword(s):  
Large Data ◽  
Data Retrieval ◽  
Test Results ◽  
Android Application ◽  
Retrieval Process ◽  
Request Queue ◽  
Plant Data ◽  
Android Development ◽  
Rest Api ◽  
The One

The One of many way to connect to the database through the android application is using volleyball and RESTAPI. By using RestAPI, the android application does not directly connect to the database but there is an intermediary in the form of an API. In android development, Android-volley has the disadvantage of making requests from large and large data, so an evaluation is needed to test the capabilities of the Android volley. This research was conducted to test android-volley to retrieve data through RESTAPI presented in the form of an application to retrieve medicinal plant data. From the test results can be used by volley an error occurs when the back button is pressed, in this case another process is carried out if the previous volley has not been loaded. This error occurred on several android versions such as lollipops and marshmallows also on some brands of devices. So that in using android-volley developer need to check the request queue process that is carried out by the user, if the data retrieval process by volley has not been completed, it is necessary to stop the process to download data using volley so that there is no Android Not Responding (ANR) error.Keywords: Android, Volley, WP REST API, ANR Error

Perancangan Smart Home Berbasis Jaringan Sensor Nirkabel

2017 ◽  
Vol 3 (2) ◽  
pp. 76
Author(s):  
Octarina Nur Samijayani ◽  
Ibnu Fauzi
Keyword(s):  
Wireless Sensor Network ◽  
Response Time ◽  
Sensor Network ◽  
Smart Home ◽  
Performance Testing ◽  
Maximum Distance ◽  
Wireless Sensor ◽  
The Internet ◽  
Network Technology ◽  
Internet Network

<p><em>Abstrak</em> - <strong>Keamanan rumah menjadi hal yang sangat penting ketika pemilik rumah meninggalkan rumah dalam keadaan kosong. Selain pencurian, kebakaran juga merupakan masalah yang sering kali terjadi ketika rumah ditinggal pemiliknya. Sebagai alternatif solusi untuk menjaga dan mengawasi rumah yang diajukan pada penelitian ini ialah menggunakan teknologi Jaringan Sensor Nirkabel yang terintegrasi dengan jaringan internet, sehingga pemilik rumah tetap dapat mengawasi keadaan rumah dari jarak jauh. Pada penelitian ini dirancang prototype sistem rumah pintar atau Smart Home yang memanfaatkan teknologi Jaringan Sensor Nirkabel menggunakan standard Zigbee. Beberapa node sensor ditempatkan pada peralatan rumah, dimana setiap node dapat saling berkomunikasi secara wireless dan terpusat di node kordinator. Selanjutnya node kordinatior akan terhubung ke jaringan internet sehingga pemilik rumah dapat membuka aplikasi smart home kapan saja dan dimana saja. Rancangan sistem <em>Smart Home</em> disimulasikan menggunakan rumah model untuk menguji kinerja perangkat <em>Smart Home</em>. Pengujian kinerja Smart Home dimulai dengan pengujian keakurasian masing masing data sensor hingga waktu respon komunikasi dari sensor ke pusat monitoring. Tingkat error pembacaan suhu disetiap ruangan ialah 1 - 4.27%. Sensor PIR berhasil mendeteksi keberadaan orang di suatu ruangan dengan waktu delay </strong><strong>adalah 2.8 detik dengan jarak maksimal 5 meter</strong><strong>. Fungsi kendali dan monitoring (<em>on/off</em>) perangkat elektronik bekerja dengan baik, dengan waktu respon kurang dari 1 detik. Dari hasil pengujian komunikasi nirkabel antar node, diperoleh bahwa jarak maksimal antar node ialah sekitar 20 m, dengan rata-rata waktu respon pengiriman data ialah 1-2 detik. Adapun waktu respon mengalami delay mencapai 2 detik apabila beberapa perintah kendali dilakukan pada waktu yang bersamaan.</strong></p><p> </p><p><strong><em>Kata Kunci - </em></strong><em>Smart Home</em>, Jaringan Sensor Nirkabel, Zigbee.</p><p> </p><p><em>Abstrak</em><strong> - Home security becomes very important when homeowners leave the house empty. In addition to theft, fire is also a problem that often occurs when the house left the owner. As an alternative solution to maintain and supervise the homes submitted in this study is to use Wireless Sensor Network technology integrated with the Internet network, so that homeowners can still monitor the state of the house remotely. In this study designed prototype smart home system or Smart Home which utilizes Wireless Sensor Network technology using Zigbee standard. Some sensor nodes are placed in the home equipment, where each node can communicate wirelessly and centrally at the coordinator node. Next node coordinate will be connected to the internet network so that homeowners can open smart home application anytime and anywhere. The Smart Home system design is simulated using a home model to test the performance of Smart Home devices. Smart Home performance testing begins with testing the accuracy of each sensor data until the communication response time from the sensor to the monitoring center. The error rate of temperature readings in each room is 1 - 4.27%. PIR sensor successfully detects the presence of people in a room with a delay time is 2.8 seconds with a maximum distance of 5 meters. The control and monitoring functions (on / off) of electronic devices work well, with a response time of less than 1 second. From the results of testing wireless communication between nodes, obtained that the maximum distance between nodes is about 20 m, with the average response time of data transmission is 1-2 seconds. The response time has a delay of 2 seconds if some control commands are done at the same time.</strong><strong></strong></p><p><strong> </strong></p><p><strong><em>Keywords - </em></strong> <em>Smart Home</em>, Jaringan Sensor Nirkabel, Zigbee.</p>

Research on Mechanical Product Development Based on CAD Software

2014 ◽  
Vol 484-485 ◽  
pp. 933-937
Author(s):  
Fu Na Li ◽  
Lin Wei Yang ◽  
Ying Zeng
Keyword(s):  
Programming Language ◽  
Interface Design ◽  
Development Process ◽  
Visual Basic ◽  
Common Language ◽  
Test Results ◽  
Technology Application ◽  
Development System ◽  
Design And Implementation ◽  
Software Interface

This paper introduces analysis the development process of CAD technology, application of the AutoCAD software in engineering field and teaching as well as the significance of the development of two times the. This paper analyzes in detail the development of common language, and the use of Visual BASIC development and application of software based on AutoCAD. The author elaborates the software interface design and method calls AutoCAD in VB. Finally, the design and implementation of a programming language re-development system based on AutoCAD is concerned. The test results show that the developed AutoCAD two development system has good practical value.

scholarly journals A Smart Home System based on Microcontroller using Android Application and MySQL Database

2020 ◽  
Vol 3 (1) ◽  
pp. 455-464
Author(s):  
Ömer Gül ◽  
Uğur Bayrak
Keyword(s):  
Energy Efficient ◽  
Smart Home ◽  
Smart Devices ◽  
Automation System ◽  
Building Automation ◽  
Android Application ◽  
Intelligent Building ◽  
Internet Connection ◽  
Remote Server ◽  
Building Automation System

In recent years, people may disremember to turn off various devices or not be sure open or closed. Predefined scenarios for these people, home comfort and efficiency in the workplace will help a lot. Most people spend time with mobile phones throughout the day. Therefore, the control of smart devices by phones would be an appropriate solution. In this study, it is designed with microcontroller based intelligent building automation system hardware and software to provide energy efficient, security and comfort. The programming of the microcontroller, writing the android application program for the mobile phone and MySQL database software were realized. Microcontroller with GSM shield, it is possible to control the devices connected to the system by an android application automatically and manually by means of the internet connection by the MySQL database on the remote server. It is ensured that all devices are adjusted with a single touch according to predefined scenarios.

scholarly journals Implrmrntasi Policy Base Routing Dan Failover Menggunakan Router Mikrotik Untuk Membagi Jalur Akses Inter Di Fakultas Komputer Universitas Bina Insan Lubuklinggau

2019 ◽  
Vol 10 (03) ◽  
pp. 114-121
Author(s):  
Armanto Armanto
Keyword(s):  
Internet Access ◽  
The Internet ◽  
Access Points ◽  
Internet Connection ◽  
Network Connection ◽  
Internet Users ◽  
Internet Networks ◽  
The University ◽  
Collection Methods ◽  
Internet Network

ABSTRACT The problem in this study is that more and more internet users in the Bina Insan Lubuklinggau University building specifically the Faculty of Computer internet connection often experience problems, the internet network is still unstable, and ways to divide internet access points in the Computer Faculty. This study uses data collection methods by observing and recording directly at the research site (Observation), conducting question and answer directly to the source (Interview), and documentation by reading literature books. The results showed that the internet is often experiencing constraints and unstable internet networks and ways to divide internet access points at the Computer Faculty of the University of Bina Insan Lubuklinggau by using Policy Base Routing and Failover Implementation using a Mikrotik Router. It can be concluded that the internet network connection is stable and shows the results of the distribution of internet access points at the Faculty of Computer Bina Insan Lubuklinggau. Keywords: Mikrotik, Policy Base Routing, Failover

scholarly journals Comparative analysis of view technologies for the Spring application

2020 ◽  
Vol 14 ◽  
pp. 78-81
Author(s):  
Vadym Borys ◽  
Roman Slezenko ◽  
Beata Pańczyk
Keyword(s):  
Comparative Analysis ◽  
User Interface ◽  
Memory Performance ◽  
Performance Tests ◽  
Test Results ◽  
Rest Api

The goal of the article is to choose the most efficient user interface creation tools possible for Spring. The study compares 4 selected view technologies: JSP,  Thymeleaf, Wicket and Angular. Time and memory performance tests were carried out using Rest API in Spring. Test results allowed to identify the best solutions.

DuBot

2021 ◽  
pp. 329-353
Author(s):  
Avraam Chatzopoulos ◽  
Michail Kalogiannakis ◽  
Stamatios Papadakis ◽  
Michail Papoutsidakis ◽  
Dethe Elza ◽  
...  
Keyword(s):  
Action Research ◽  
Programming Language ◽  
Low Cost ◽  
Visual Programming ◽  
Initial Evaluation ◽  
Educational Robotics ◽  
Internet Connection ◽  
Engineering Mathematics ◽  
Visual Programming Language ◽  
The University

This chapter presents the design and development of an open-source, low-cost robot for K12 students, suitable for use in educational robotics and science, technology, engineering, mathematics (STEM). The development of DuΒot is a continuation of previous research and robot's innovation is based on three axes: (a) its specifications came from the 1st cycle of action research; (b) robot's visual programming language is integrated into the robot, taking advantage of the fact that it can be programmed from any device (smartphone, tablet, PC) with an internet connection and without the need to install any software or app; (c) is low-cost with no “exotic” parts robot than anyone can build with less than 50€. Furthermore, the robot's initial evaluation is presented -from distance due to emergency restrictions of Covid-19 is presented by the University of Crete, Department of Preschool Education's students.

scholarly journals The Calculation of the Fuel Cost for a Car

2018 ◽  
Vol 47 (4) ◽  
pp. 277-282 ◽  
Author(s):  
Radik Ildarkhanov
Keyword(s):  
Fuel Consumption ◽  
Test Results ◽  
Fuel Cost ◽  
Average Speed ◽  
Vehicle Weight ◽  
The Cost ◽  
New Formula ◽  
Physical Phenomena

The proposed formula derived considering the physical phenomena which occur during truck operation makes it possible to calculate fuel cost during the operation more accurately. The results of comparison of calculations by the proposed formula with test results tractors parties “TransEuroTest” are presented. The results of the calculation with the help of new formula differ from the experimentally obtained values of the fuel consumption of vehicles for not more than 1%. The average fuel consumption of tractors at an average speed is shown. The proposed formula for calculating the cost makes it easy to compare the fuel consumption of different vehicle options. The formula can also be used when evaluating the effect of vehicle weight on fuel consumption, which is impossible according to the well-known formulas.

Sign in / Sign up

Export Citation Format

Share Document