scholarly journals THE APPLICATION OF SMED METHOD IN THE INDUSTRIAL ENTERPRISE

2020 ◽  
Vol 7 (4) ◽  
pp. 269-281
Author(s):  
Lukáš Jurík ◽  
Natália Horňáková ◽  
Veronika Domčeková
Keyword(s):  
Production Process ◽  
Video Recording ◽  
Significant Proportion ◽  
Idle Time ◽  
Industrial Enterprise ◽  
Customer Requirements ◽  
Time Duration ◽  
Production Variability ◽  
Wide Range ◽  
The Given

The production process fluency is often interrupted by idle time. A significant proportion of individual idle times is caused by changeover. Trends, such as the individualization of requirements, the constant effort to meet the customers’ requirements on time and the maintaining of the production process fluency at low costs, are aimed at eliminating idle time. In terms of contradictory goals such as individualization of customer requirements, which is reflected in the high variability of production / products and minimalization of the production time and its fluency, it is necessary to pay increased attention to the changeover process. The problem related to the changeover process can be solved in two ways: by reducing the number of changeovers (reducing production variability and achieving dissatisfaction with individual customer requirements) or by shortening the changeover time (while maintaining production variability and ability to satisfy a wide range of individual customer requirements). The Single-Minute Exchange of Die - SMED method is used to shorten the time duration of the changeover process and eliminate waste in the given process. The aim of the paper is to apply the SMED method in vibration welder changeover process in a selected industrial enterprise and thus achieve a shortening of the changeover process. The SMED method was applied in the enterprise which belongs to the group of small and medium-sized enterprises. The research method was indirect observation via video recording and time snap. Various types of waste were identified based on the analysis, and subsequently eliminated by proposed rationalization measures. Finally, the time duration of the changeover process before the analysis and after the implementation of rationalization measures was compared.

The development of the movement for the communist labour at the Tyumen shipbuilding plant in days of the seven-year plan (1959-1965): the experience of microhistorical study

2019 ◽  
Vol 5 (2) ◽  
pp. 153-172
Author(s):  
Sergey S. Pashin ◽  
Natalia S. Vasikhovskaya
Keyword(s):  
Political History ◽  
The State ◽  
Historical Narrative ◽  
Industrial Enterprise ◽  
State Archive ◽  
Wide Range ◽  
Archival Documents ◽  
History Of

The article is devoted to the study of the movement for communist labour at the Tyumen Shipbuilding Plant during the period of the seven-year plan (1959-1965). The authors seek to fill a historical narrative with the particular facts connected with the peculiarities and specifics of such phenomenon as the movement for communist labour. They consider it in the context of microhistory and as the most important element of production routine. The employees of the largest industrial enterprise of Soviet Tyumen — Shipbuilding Plant in concrete historical circumstances came under the spotlight of the authors. The submitted article is written with attraction of a wide range of archival documents, taken from the funds of the State Archive of the Tyumen Region and also funds of the State Archive of Socio-Political History of the Tyumen Region. Having studied the documents the authors come to conclusion that the movement for communist labour had little effect on the production progress of the plant employees.

scholarly journals Optimising the AR Engraved Structure on Light-Guide Facets for a Wide Range of Wavelengths

Optics ◽  
2020 ◽  
Vol 2 (1) ◽  
pp. 25-42
Author(s):  
Ioseph Gurwich ◽  
Yakov Greenberg ◽  
Kobi Harush ◽  
Yarden Tzabari
Keyword(s):  
Theoretical Analysis ◽  
Light Guide ◽  
Spectral Band ◽  
Angular Range ◽  
The Past ◽  
Input And Output ◽  
Wide Range ◽  
The Given ◽  
Theoretical Results ◽  
Shape And Size

The present study is aimed at designing anti-reflective (AR) engraving on the input–output surfaces of a rectangular light-guide. We estimate AR efficiency, by the transmittance level in the angular range, determined by the light-guide. Using nano-engraving, we achieve a uniform high transmission over a wide range of wavelengths. In the past, we used smoothed conical pins or indentations on the faces of light-guide crystal as the engraved structure. Here, we widen the class of pins under consideration, following the physical model developed in the previous paper. We analyze the smoothed pyramidal pins with different base shapes. The possible effect of randomization of the pins parameters is also examined. The results obtained demonstrate optimized engraved structure with parameters depending on the required spectral range and facet format. The predicted level of transmittance is close to 99%, and its flatness (estimated by the standard deviation) in the required wavelengths range is 0.2%. The theoretical analysis and numerical calculations indicate that the obtained results demonstrate the best transmission (reflection) we can expect for a facet with the given shape and size for the required spectral band. The approach is equally useful for any other form and of the facet. We also discuss a simple way of comparing experimental and theoretical results for a light-guide with the designed input and output features. In this study, as well as in our previous work, we restrict ourselves to rectangular facets. We also consider the limitations on maximal transmission produced by the size and shape of the light-guide facets. The theoretical analysis is performed for an infinite structure and serves as an upper bound on the transmittance for smaller-size apertures.

Study of Temperature Effect on Servovalve-Controlled Fuel Metering Unit

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Bin Wang ◽  
Haocen Zhao ◽  
Ling Yu ◽  
Zhifeng Ye
Keyword(s):  
Steady State ◽  
Temperature Variation ◽  
Dynamic Characteristics ◽  
Numerical Study ◽  
Step Response ◽  
Fuel Temperature ◽  
Wide Range ◽  
Fuel Rate ◽  
Testing Condition ◽  
The Given

It is usual that fuel system of an aero-engine operates within a wide range of temperatures. As a result, this can have effect on both the characteristics and precision of fuel metering unit (FMU), even on the performance and safety of the whole engine. This paper provides theoretical analysis of the effect that fluctuation of fuel temperature has on the controllability of FMU and clarifies the drawbacks of the pure mathematical models considering fuel temperature variation for FMU. Taking the electrohydraulic servovalve-controlled FMU as the numerical study, simulation in AMESim is carried out by thermal hydraulic model under the temperatures ranged from −10 to 60 °C to confirm the effectiveness and precision of the model on the basis of steady-state and dynamic characteristics of FMU. Meanwhile, the FMU testing workbench with temperature adjustment device employing the fuel cooler and heater is established to conduct an experiment of the fuel temperature characteristics. Results show that the experiment matches well with the simulation with a relative error no more than 5% and that 0–50 °C fuel temperature variation produces up to 5.2% decrease in fuel rate. In addition, step response increases with the fuel temperature. Fuel temperature has no virtual impact on the steady-state and dynamic characteristics of FMU under the testing condition in this paper, implying that FMU can operate normally in the given temperature range.

Appreciating Rapid Technology Integration in Creating Value in Enterprises

2014 ◽  
Vol 12 (1) ◽  
pp. 53-75 ◽  
Author(s):  
Mambo G. Mupepi ◽  
Sylvia C. Mupepi
Keyword(s):  
Knowledge Creation ◽  
Significant Proportion ◽  
Social Economy ◽  
Primary Objective ◽  
Social Enterprises ◽  
Use Of Technology ◽  
Wide Range ◽  
The World ◽  
Skilled Personnel ◽  
Increase Productivity

The primary objective of this paper is about innovation within specific social organization which compacts with the division of labor, knowledge creation, and the use of technology such as e-enterprise in social economy aimed at improving productivity. A significant proportion of the world's economy is organized to make profits not only for investors but to sustain the employment of many disadvantaged people throughout the world. It includes cooperative organizations, foundations and many other social enterprises that provide a wide range of products and services across the globe and generate sustainable employment. Productivity tends to increase when the job is divided into manageable portions and then performed by adequately skilled personnel. In order to succeed in an environment in which other businesses fiercely compete along with social enterprises it is imperative to take into account innovative systems such as e-enterprise to leverage competition and increase productivity.

Longitudinal outcomes of patients with pseudodementia: a systematic review

2018 ◽  
Vol 49 (5) ◽  
pp. 727-737 ◽  
Author(s):  
Michael H. Connors ◽  
Lena Quinto ◽  
Henry Brodaty
Keyword(s):  
Systematic Review ◽  
Significant Proportion ◽  
Conversion Disorder ◽  
Bibliographic Databases ◽  
Clinical Value ◽  
Trial Methodology ◽  
Longitudinal Outcomes ◽  
Increased Risk ◽  
Wide Range

AbstractDepression and a number of other psychiatric conditions can impair cognition and give the appearance of neurodegenerative disease. Collectively, this group of disorders is known as ‘pseudodementia’ and are important to identify given their potential reversibility with treatment. Despite considerable interest historically, the longitudinal outcomes of patients with pseudodementia remain unclear. We conducted a systematic review of longitudinal studies of pseudodementia. Bibliographic databases were searched using a wide range of search terms. Two reviewers independently assessed papers for inclusion, rated study quality, and extracted data. The search identified 18 studies with follow-up varying from several weeks to 18 years. Overall, 284 patients were studied, including 238 patients with depression, 18 with conversion disorder, 14 with psychosis, and 11 with bipolar disorder. Irrespective of diagnosis, 33% developed irreversible dementia at follow-up, 53% no longer met criteria for dementia, and 15% were lost to follow-up. Considerable variability was identified, with younger age at baseline, but not follow-up duration, associated with better outcomes. ECT and pharmacological interventions were also reported to be beneficial, though findings were limited by the poor quality of the studies. Overall, the findings suggest that pseudodementia may confer an increased risk of irreversible dementia in older patients. The findings also indicate, however, that a significant proportion improve, while many remain burdened with their psychiatric condition, independent of organic dementia. The findings support the clinical value of the construct and the need for its re-examination in light of developments in neuroimaging, genomics, other investigative tools, and trial methodology.

scholarly journals Production Process Effect on Mexican Agave Syrups Quality: A Preliminary Study

2018 ◽  
Vol 7 (3) ◽  
pp. 50
Author(s):  
Blanca I. Maldonado-Guevara ◽  
Sandra T. Martín del Campo ◽  
Anaberta Cardador-Martínez
Keyword(s):  
Production Process ◽  
Industrial Process ◽  
Quality Parameters ◽  
Thermal Hydrolysis ◽  
Process Variables ◽  
Anova Analysis ◽  
Hydroxymethyl Furfural ◽  
Wide Range ◽  
Preliminary Study

In this work, the quality parameters of commercial agave syrups produced in five different Mexican states and with different production process were evaluated. Regulated parameters (pH, Moisture, Ashes, and 5-(hydroxymethyl) furfural), as well as color and aw, were measured on 25 agave syrups, including traditional samples as controls. Traditional and semi-industrial syrups were samples obtained by thermal hydrolysis. Additionally, the semi-industrial process included control of process variables such as pH, °Bx, and temperature. The industrial process is technified. The agave syrups ranged from 70-76 °Bx, pH ranged from 3.2-6.7, and moisture from 20.2-28.6%. The aw values shown a wide variation as well as L* a* and b* color parameters. Some of those parameters shown significant differences in ANOVA analysis; however, most of the samples complied with the norm. General Discriminant Analysis (GDA) made it possible to discriminate between production process by using pH, % Ash, b*, 5-(hydroxymethyl)furfural and a* parameters. Further analysis of a wide range of syrups and the inclusion of non-regulated compounds such as volatile compounds and carbohydrates are needed to get more information for a deeper characterization of agave syrups. 

«TRADE LOCAL, BUY LOCAL, BE LOCAL»: AGRICULTURAL EXHIBITIONS AND FAIRS IN HALYCHYNA IN THE 20-30S OF THE 20TH CENTURY

2020 ◽  
Vol 8 ◽  
pp. 19-27
Author(s):  
Oksana Pasitska
Keyword(s):  
Crop Production ◽  
Animal Husbandry ◽  
Folk Art ◽  
Cultural Development ◽  
Agricultural Products ◽  
Educational Institutions ◽  
Local Market ◽  
Agricultural Equipment ◽  
Wide Range ◽  
The Given

The article focuses on the exhibition activities of the Ukrainians, which were reflected upon in periodicals. In particular, it analyzes the organizational aspects and features of fairs and exhibitions of the agricultural products that were held upon the initiative of economic institutions and public organizations such as «Silskyi Hospodar» («The Farmer»), «Maslosoiuz», «Tsentrosoiuz», RSUK («The Auditing Union of Ukrainian Cooperatives»), «Soiuz ukrainok» («The Union of Ukrainian Women»), «The Ukrainian Folk Art» («Ukrainske narodne mystetstvo»), «The Hutsul Art» («Hutsulske mystetstvo»), «The Beekeeping Union» («Pasichnycha spilka»), «Rii» («The Swarm»), «Prosvita» («The Education») county unions, cooperatives, etc. Economic educational institutions also took part in the exhibitions. The first Ukrainian agrotechnical exhibitions were held in Stryi in 1909 and 1907, and later they took place in various Halychyna towns and villages, including Staryi Sambir, Dashava, and Sokal. Cooperative figures, such as D. Sembratovych, E. Olesnytskyi, O. Nyzhankivskyi, O. Lutskyi, A. Zhuk, M. Khronoviat, etc., played an important role in the organization of the given exhibitions. The article outlines the main functions performed by the exhibitions and fairs and the range of goods in demand among the visitors. Each exhibition was divided into separate sections, where the passers-by and the buyers could get acquainted with the results of work of the Ukrainian entrepreneurs and farmers in crop production, horticulture, vegetable growing, animal husbandry, beekeeping, crafts, and agricultural equipment. «Maslosoiuz» products, folk art products, and a wide range of medical products were especially popular at agro-technical exhibitions. Exhibitions and fairs were the manifestation of competitiveness in the local market, a factor of the region's economic and cultural development, as they were accompanied by entertainment and educational activities, including lectures, speeches, and presentations of new economic publications. Keywords: exhibitions, fairs, Halychyna, agricultural exhibitions and fairs

Functionalization of Graphene with O and S for Catalytic Degradation of Chlorophenols and Dyes

2021 ◽  
Vol 1019 ◽  
pp. 194-204
Author(s):  
S. Sudhaparimala ◽  
R. Usha
Keyword(s):  
Graphene Oxide ◽  
Organic Dyes ◽  
Analytical Techniques ◽  
Degradation Process ◽  
Experimental Conditions ◽  
Photocatalytic Application ◽  
Wide Range ◽  
Doped Graphene ◽  
The Given ◽  
Graphene Structures

Graphene, functionalized with the heteroatoms like nitrogen, oxygen and sulphur atoms has been well explored for a wide range of applications but only few reports are available on its adsorption and photocatalytic application in the degradation of chlorophenols and organic dyes. A simple and energy-efficient process to prepare graphene oxide and sulphur doped graphene oxide was developed. The micro structure and surface morphology were confirmed by the analytical techniques of Powder X-ray diffractogram (PXRD), Fourier Transformed Raman Spectroscopy (FT-Raman), Scanning Electron Microscopy. The results were suggestive of the structures suitable for screening their catalytic activity in the degradation of the highly toxic polychlorophenols and organic dyes. The adsorption and photo catalytic properties of the asprepared samples were screened for the degradation process and it was found that sulphur doped graphene oxide showed more positive results for the degradation of chlorophenols than graphene oxide. Under the given experimental conditions the decoloration of dyes were not satisfactory. Ultimately, the study provided an economical and efficient, method for tuning graphene structures for the removal of pollutants in wastewater.

Scanning laser wave recorder with registration of “instantaneous” sea surface profiles

2021 ◽  
Author(s):  
V.V. Sterlyadkin ◽  
K.V. Kulikovsky ◽  
A.V. Kuzmin ◽  
E.A. Sharkov ◽  
M.V. Likhacheva
Keyword(s):  
Spatial Scales ◽  
Wind Waves ◽  
Single Point ◽  
Video Recording ◽  
Surface Profile ◽  
Weather Conditions ◽  
Sea Surface ◽  
Sea Waves ◽  
Wide Range ◽  
Wave Recorder

AbstractA direct optical method for measuring the “instantaneous” profile of the sea surface with an accuracy of 1 mm and a spatial resolution of 3 mm is described. Surface profile measurements can be carried out on spatial scales from units of millimeters to units of meters with an averaging time of 10−4 s. The method is based on the synchronization of the beginning of scanning a laser beam over the sea surface and the beginning of recording the radiation scattered on the surface onto the video camera matrix. The heights of all points of the profile are brought to a single point in time, which makes it possible to obtain “instantaneous” profiles of the sea surface with the frequency of video recording. The measurement technique and data processing algorithm are described. The errors of the method are substantiated. The results of field measurements of the parameters of sea waves are presented: amplitude spectra, distribution of slopes at various spatial averaging scales. The applied version of the wave recorder did not allow recording capillary oscillations, but with some modernization it will be possible. The method is completely remote, does not distort the properties of the surface, is not affected by wind, waves and sea currents, it allows you to measure the proportion of foam on the surface. The possibility of applying the proposed method at any time of the day and in a wide range of weather conditions has been experimentally proved.

scholarly journals What more than a hundred project groups reveal about teaching visualization

2020 ◽  
Vol 23 (5) ◽  
pp. 895-911 ◽  
Author(s):  
Michael Burch ◽  
Elisabeth Melby
Keyword(s):  
Programming Languages ◽  
Information Visualization ◽  
Teaching Strategies ◽  
Data Science ◽  
Major Goal ◽  
Wide Range ◽  
Project Groups ◽  
Small Project ◽  
Programming Skills ◽  
The Given

Abstract The growing number of students can be a challenge for teaching visualization lectures, supervision, evaluation, and grading. Moreover, designing visualization courses by matching the different experiences and skills of the students is a major goal in order to find a common solvable task for all of them. Particularly, the given task is important to follow a common project goal, to collaborate in small project groups, but also to further experience, learn, or extend programming skills. In this article, we survey our experiences from teaching 116 student project groups of 6 bachelor courses on information visualization with varying topics. Moreover, two teaching strategies were tried: 2 courses were held without lectures and assignments but with weekly scrum sessions (further denoted by TS1) and 4 courses were guided by weekly lectures and assignments (further denoted by TS2). A total number of 687 students took part in all of these 6 courses. Managing the ever growing number of students in computer and data science is a big challenge in these days, i.e., the students typically apply a design-based active learning scenario while being supported by weekly lectures, assignments, or scrum sessions. As a major outcome, we identified a regular supervision either by lectures and assignments or by regular scrum sessions as important due to the fact that the students were relatively unexperienced bachelor students with a wide range of programming skills, but nearly no visualization background. In this article, we explain different subsequent stages to successfully handle the upcoming problems and describe how much supervision was involved in the development of the visualization project. The project task description is given in a way that it has a minimal number of requirements but can be extended in many directions while most of the decisions are up to the students like programming languages, visualization approaches, or interaction techniques. Finally, we discuss the benefits and drawbacks of both teaching strategies. Graphic abstract

Sign in / Sign up

Export Citation Format

Share Document