scholarly journals DESIGN AND MANUFACTURE OF BAMBOO HANDICRAFT DRYER MACHINE BASED ON LPG GAS

2021 ◽  
Vol 2 (1) ◽  
pp. 01-09
Author(s):  
Muhammad Agus Saparudin ◽  
Rizal Justian Setiawan ◽  
Eko Budi ◽  
Aji Puspito ◽  
Imam Fauzi
Keyword(s):  
Natural Resources ◽  
Production Process ◽  
Appropriate Technology ◽  
Drying Process ◽  
Long Time ◽  
Bamboo Plant ◽  
Design And Manufacture ◽  
Ethnic Appearance ◽  
Maximum Limit ◽  
Special Region

Bamboo plant is one of Indonesia's natural resources. People use bamboo to make household furniture, fences, frames, and handicrafts.  Bamboo plant is a special commodity that can be used as various kinds of handicraft products in DIY, precisely in Brajan area, Sleman Regency.  Based on observations that have been conducted on one of the bamboo craftsmen in the Brajan area, bamboo handicraft is in great demand due to they have a unique and ethnic appearance, but the production process is quite complicated and takes a long time. According to the literature, this is due to bamboo plants are classified as herbaceous plants, namely plants with watery or wet stems. So far, the method used is drying bamboo handicrafts under the hot sun, and using a dryer that can only be used for one type of handicraft. This method is not optimal and not effective for producing bamboo handicrafts. Therefore, it is necessary to apply appropriate technology to optimize the production of bamboo crafts, the solution is to manufacture bamboo dryers to facilitate bamboo handicraft producers in the bamboo drying process.  In general, the appearance of this tool resembles a cupboard. This tool has a size of 1200x800x1800 mm with three chambers. This tool works by utilizing the heat from the LPG gas stove. As a temperature controller, this tool is equipped with a blower that has been programmed with Arduino Uno and functions to stabilize the temperature if the heat generated exceeds the maximum limit.  The dryer machine can dry bamboo handicrafts to a water content of 2.5% in just 40 minutes, very efficient compared to conventional methods. This tool can facilitate and optimize the production of bamboo handicrafts in the ​​Brajan area, Sleman, Special Region of Yogyakarta.

PERANCANGAN MESIN PEMERAS LENDIR BIJI KAKAO (DEPULPER) TIPE ROTARY UNTUK MENINGKATKAN MUTU BIJI BUAH KAKAO DESA SUMBERAGUNG KABUPATEN BANYUWANGI

ROTOR ◽  
2017 ◽  
Vol 10 (2) ◽  
pp. 72
Author(s):  
Nuraini Lusi ◽  
Afandi Akhmad ◽  
Catrawedarma IGNB ◽  
Anam Chairul
Keyword(s):  
Production Process ◽  
Appropriate Technology ◽  
Cocoa Bean ◽  
Long Time ◽  
Cocoa Farmers

The purpose of this activity is to improve the productivity of the farmers in the success of cocoa fruit through the use of appropriate technology for the separation of coco seeds / squeezer machine, with the application of this technology is expected to assist farmers in the production process so that the quality results of cocoa produced will be more optimal. Cocoa bean separator machine serves to accelerate the process of separation of salut which during this process is still manually and takes a long time. This salute separator machine as much as possible the process is easy and the results are really on target. The main objective of making cocoa depulper is to assist cocoa farmers in the process of harvesting and improving the quality of crops so that the needs of cocoa farmers can be fulfilled. Keywords: cocoa, salute, depulper, rotary system

PRODUKSI GULA MERAH DI RT 002 RW 002 DESA SLUMBUNG KECAMATAN NGADILUWIH KABUPATEN KEDIRI BERDASARKAN PERSPEKTIF ISLAM

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Elsa Karino
Keyword(s):  
Property Rights ◽  
Natural Resources ◽  
Production Process ◽  
Key Words ◽  
Transformation Process ◽  
Economic Potential ◽  
Capital Management ◽  
Islamic Perspective ◽  
The Earth ◽  
The Creation

Production is an activity to convert inputs into outputs through the transformation process. Input in the form of man, money, method, material, machine. While the output is in the form of goods or services. The purpose of production in general is to meet individual needs. There are several factors that influence production namely land and all economic potential that is processed and cannot be separated from the production process, labor is directly related to the demands of property rights through production, and capital, management and technology. In production there are various types of production, namely production which is intermittent and continuous. The production, if viewed from an Islamic perspective, it must fulfill the following principles. First, produce in a halal circle. Second, managing natural resources in production is interpreted as the process of creating wealth by utilizing natural resources must rely on the vision of the creation of this nature and along with the vision of human creation, namely as a blessing for all nature. Third, the Caliph on the earth is not only based on the activity of producing the usefulness of an item but work is done with the motive of benefiting to seek the pleasure of Allah SWT. Key Words: Production, Red Sugar, benefiting

The Development Of Society Businesses In Concrete Blocks Production With A Single Vibration System In The Pare Sub-District Kediri Regency

2020 ◽  
Vol 1 (1) ◽  
pp. 19-23
Author(s):  
Diah Willis L ◽  
Thomas Priyasmanu ◽  
Wahyu Panji A ◽  
D. H. Praswanto ◽  
E. Y. Setyawan
Keyword(s):  
Community Service ◽  
Production Cost ◽  
Building Construction ◽  
Vibration System ◽  
Current Development ◽  
Drying Process ◽  
Long Time ◽  
Concrete Blocks ◽  
Good Potential ◽  
Main Components

Development in the current development sector has grown rapidly, in this development we can see a good potential to be developed, namely the development of bricks with good quality compared to using red bricks which production takes a long time. Batako is an alternative that can be used in the construction of a building, because currently the price of red brick is quite high because the production cost is quite expensive. Besides, the price of firewood used for cooking red brick is getting difficult. Meanwhile, the demand for brick gradually increased because brick was one of the main components in building construction. So it needs to be developed in making brick blocks because the time is relatively short in the drying process. Therefore the community service team made a brick making machine with a vibration system for compaction and a faster production process in brick making using a machine that has been made, so that it can increase partner income, who previously produced 120 pieces with a manual system using a machine that could produce 500 pieces of brick per day.

Assessment of recreational use of specially protected natural territories of Tatishchevsky district of Saratov region

2019 ◽  
Vol 27 (2) ◽  
pp. 117-127
Author(s):  
Yulia M Andriyanova ◽  
Irina V Sergeeva ◽  
Yulia M Mokhonko ◽  
Natalia N Gusakova
Keyword(s):  
Natural Resources ◽  
Protected Areas ◽  
Saratov Region ◽  
Future State ◽  
Forest Phytocenoses ◽  
Long Time ◽  
Main Components ◽  
First Time ◽  
Recreational Use ◽  
Specially Protected Natural Territories

The influence of recreation being a set of measures to restore health and recreation, on the main components of forest phytocenoses in specially protected natural territories of the Tatishchevsky district of the Saratov region has been studied for the first time. These phytocenoses have been intensively used for tourism for a long time. The intensity and visits activity of protected areas has been determined; the recreational capacity of territorial objects has been studied. The degree of forest landscapes has been revealed in specially protected natural territories. The findings allow predicting the future state of the natural resources of the Saratov region and can be taken into account when assessing their optimal use.

PROTECTION OF THE ENVIRONMENT AND ACCESS TO NATURAL RESOURCES, ESPECIALLY WATER

2021 ◽  
Vol 3 (4) ◽  
pp. 388-406
Author(s):  
Suheir Ibrahim Hachim NKHELA
Keyword(s):  
Natural Resources ◽  
Water Levels ◽  
Future Generations ◽  
International Treaties ◽  
Environmental Threats ◽  
Global Issue ◽  
The World ◽  
Long Time ◽  
Environmental Human Rights ◽  
Groundwater Basins

Environmental hazards are not considered a national problem that stops at the state’s borders only, but has become a regional and global issue that poses a direct threat to human survival all over the world as a whole. It requires the global community to provide environmental human rights and all the ingredients for sustainable development, especially clean air, clean fresh water, healthy food, and preserving natural resources for future generations. The water problem topped the list of environmental threats, as most countries of the world suffer from a severe shortage of water levels, diminishing the share of each person in the limited quantities of water, and today the world's countries and governments fear unending regional wars due to water, and the conflict over its sources, and the sources of rivers. Therefore, the issue of water has taken on a global character, and the complete conviction that water is the first problem that will face our future generations. he water war between the riparian states is a real war, and it will continue and happen inevitably. In the World Water Forum held in Istanbul in 2009, which showed that 260 water basins are shared by two or more countries, around which 40% of the world's population live, and there are hundreds of shared groundwater basins, for example there are fourteen countries that share a river The European Danube, eleven countries share each of the Nile and Niger rivers, nine countries share the Amazon River, and four countries share the Tigris and Euphrates, and the same is the Jordan River. Differences arose between the participating countries over the sources and the distribution of water between them for a long time, and sometimes reached the stage of acute conflicts and crises, and their intensity increased day after day. Dozens of international treaties have not resolved these differences, as disputes have not stopped after the conclusion of approximately 145 international treaties, and the reason for this is the absence of cooperation between these countries, the scarcity of rainwater, and the thinking of each country in isolation from the interests and peoples of other countries with which they share river water.

scholarly journals Meningkatkan kinerja usaha kecil menengah dengan pendekatan value engineering

2018 ◽  
Vol 1 (1) ◽  
pp. 35 ◽  
Author(s):  
M. Muslimin Ilham ◽  
Ferry Suzantho ◽  
Surahmad Surahmad ◽  
Fuad Achmadi
Keyword(s):  
Production Process ◽  
Labor Cost ◽  
Value Engineering ◽  
Engineering Method ◽  
Selling Price ◽  
Company Performance ◽  
Research Activities ◽  
Long Time ◽  
Technical Specifications ◽  
Welding Joints

Currently, the use of value engineering has been done in various business fields. Not only large companies, but SMEs in the region have also started to recognize the method of business management with value engineering. This research attempts to solve the problem of how SMEs can improve their performance based on Value Engineering approach. This research is a qualitative research. From the research activities, obtained the following conclusions. (1) Application of Value Engineering method on SMEs can complete better solution in order to improve company performance. (2) Based on the alternative combination of work methods created then, alternative application of value engineering selected. Because the application of value engineering has advantages such as: (a) Rapid production process, (b) Neat workmanship, (c) Selling price is higher. While the technical specifications owned by Value Engineering alternatives that will be run are as follows: (a) The process does not work long time to manufacture 1 unit of minimalist metal fence. For the size of 8m2 it only takes 2 days. (b) The quality and quality required have a perfect shape and are not defective. (c) The welding joints are not easily broken by impact / blow. (3) Cost reduction can be done on Value Engineering method, because the change of new method in production process of minimizing iron fence affecting the reduction of labor cost. The reduction of these costs will affect the increase in the higher performance of the product, so the value of the product to rise, then affect the selling price to be high.

scholarly journals Vannamei shrimp cultivation technology as an innovation of coastal land use in Rugemuk village Pulau Labu sub-district Deli Serdang district in 2019

2019 ◽  
Vol 4 (2) ◽  
pp. 232-236
Author(s):  
Irnawati Marsaulina ◽  
Harlem Marpaung
Keyword(s):  
Appropriate Technology ◽  
Shrimp Farming ◽  
Shrimp Culture ◽  
Long Run ◽  
Third Stage ◽  
Service Activity ◽  
Long Time ◽  
Coastal Land Use ◽  
Cultivation Technology ◽  
Shrimp Cultivation

This community service activity aims to increase the ability of fishermen and apply appropriate technology to cultivate Vannamei shrimp in a sustainable manner so that it will improve the welfare of fishermen's families. To achieve the objectives, several stages of activities are carried out, the first stage of the survey is to find out how the fish cultivator fishermen groups carry out their activities. The second stage is the socialization of activities that will be carried out to increase the ability to grow shrimp so that the results in a long time can increase the income (economy) of the fishermen. The third stage is to carry out coaching and counseling related to shrimp farming and can make decisions in the next economic field. This service program is carried out within 6 months. Program targets and outcomes (1). Increased knowledge and skills on appropriate technology in conducting Vannamei shrimp cultivation (2). Increased Vannamei shrimp yields by conducting shrimp culture training using tarpaulins. (3). In the long run, the results of aquaculture increase the economic welfare of the fishermen's family.

scholarly journals Uso da argila no processo produtivo da cerâmica vermelha: Um estudo de caso no município de Paudalho, Pernambuco

2015 ◽  
Vol 10 (1) ◽  
Author(s):  
Y. M. Paz ◽  
R. M. Holanda ◽  
S. G. El-Deir
Keyword(s):  
Natural Resources ◽  
Production Process ◽  
High Availability ◽  
Raw Material ◽  
Renewable Natural Resources ◽  
Ceramic Blocks ◽  
Renewable Natural Resource ◽  
The City ◽  
Red Ceramics

As frações granulométricas do solo são consideradas recursos naturais não renováveis, devido a escala de tempo necessária para sua formação. A argila possui elevada disponibilidade na natureza, e por isso seu uso ainda é indiscriminado. É a matéria-prima principal para as indústrias de cerâmica vermelha pulverizadas em todo o território brasileiro. O objetivo do trabalho foi realizar uma discussão acerca do recurso natural não renovável argila e seu uso no processo produtivo da Indústria de cerâmica vermelha. Este foi desenvolvido através de pesquisa bibliográfica, e estudo de caso com realização de visitas técnicas a uma indústria de cerâmica vermelha localizada no município de Paudalho no estado de Pernambuco. No ano de 2013 a Indústria X adquiriu para estoque e consumo 70.161 toneladas, para uma produção de 35.806.268 blocos de cerâmica. De todo o quantitativo produzido houve uma perda de 7,5%, que reflete em 4.768 toneladas de argila e num prejuízo aproximado de R$ 845.835,52. Através do trabalho realizado percebe-se que há uma necessidade de planejamento da exploração e uso dos recursos naturais não renováveis, pois estes podem se tornar escassos e inviabilizar determinados processos produtivos. Isso pode acarretar em conflitos sociais e econômicos, pela valoração dos recursos e diminuição de disponibilidade para uso, ocasionando redução dos lucros por parte dos empresários e por consequência diminuição na oferta de empregos.Use of clay in the production process of the Red Ceramics: A case study in the city of Paudalho, Pernambuco Abstract: The fractions of soil are considered non-renewable natural resources, because the time scale required for its formation. Clay has high availability in nature, and therefore its use is still indiscriminate. It is the main raw material for the manufacture of red ceramic sprayed throughout the Brazilian territory. The objective was to conduct a discussion of non-renewable natural resource clay and its use in industry's production process of red ceramic. It was developed through literature review and case study of technical a red ceramic industry in the municipality of Paudalho in Pernambuco state visits. In 2013 the X Industry acquired for stock and consumption 70,161 tons, for a production of 35,806,268 ceramic blocks. The entire quantity produced there was a loss of 7.5%, which reflects in 4,768 tons of clay and an approximate loss of R $ 845,835.52. Through work is noticed that there is a need for planning of exploration and use of non-renewable natural resources, as they may become scarce and derail certain production processes. This can lead to social and economic conflicts, the valuation of resources and reduced availability for use, resulting in lower profits for entrepreneurs and consequently decrease in the supply of jobs.

scholarly journals Who is Responsible for Instability in the Democratic Republic of Congo?

2014 ◽  
pp. 29-36
Author(s):  
G. M. Sidorova
Keyword(s):  
Natural Resources ◽  
Democratic Republic ◽  
Central Government ◽  
Democratic Republic Of Congo ◽  
Raw Material ◽  
Political Crisis ◽  
Armed Groups ◽  
Long Time ◽  
The Usa ◽  
Republic Of The Congo

The research focuses on the problem of military-political instability in the Democratic Republic of the Congo experiencing continued armed conflict for a long time. Dozens of illegal armed groups both Congolese and foreign origin continue to destabilize situation in the eastern part of the country causing humanitarian disasters. Due to governmental weakness, economic backwardness, chronical lack of finance resources, interethnic conflicts, all-round and widely spread corruption of the authorities, the Congolese government at the moment is not able to overcome scores of problems including the problem of security. Assistanceprovided to the DRC by itspartnerssuch as, first of all, the former metropolitan country Belgium, as well as the USA, Great Britain, the Europe Union and China works only in favourof these country-donors. They are attracted by rich Congolese natural resources which the DRC remaining one of the poorest countries in the world cannot turn to advantage to the full extent because of its economic backwardness. In exchange for so-calleddevelopment programmes, expensive strategic raw material (such as coltan, wolfram, casseterit, cooper, gold, niobium, and other) is being extracted and exported from the country, in addition, often on the inequivalent basis. This is taking place for the reason that numerous mines and open-cast mines are being controlled by different illegal armed groups and not by the central government. Therefore, it turns out that in the context of a military-political crisis, for so-called partners it is more beneficial to pursue their own interests. Furthermore, western ideologists arouse "separatism-oriented" theories similar to "balkanization", in other words, a breakdown of this giant country into several independent states. The Congolese are tremulous to this issue, they try to counter such approachs and defend the territorial integrity of the DRC. However, it is not an easy task. The impediment is unsettled relations with neighbouring countries - Rwanda, Uganda and Burundi which for tens of years exploit illegally natural resources of the DRC and try to lay hold of frontier Congolese territories.

scholarly journals Production process development of Nipa bowl from Nipa palm (Nypa fruticans Wurmb.) waste by using solar dryer cabinet for sustainability of Palian river basin community

2019 ◽  
Vol 15 (4) ◽  
pp. 593-596
Author(s):  
Noppadon Podkumnerd ◽  
Supranee Wunsri ◽  
Sujint Khairin
Keyword(s):  
Production Process ◽  
River Basin ◽  
Bacterial Contamination ◽  
Process Development ◽  
Drying Methods ◽  
Drying Process ◽  
Nypa Fruticans ◽  
Solar Dryer ◽  
Nipa Palm ◽  
Palm Leaf

The objective of this research was to develop the process for the production of Nipa bowls from Nipa palm (Nypa fruticans Wurmb.) waste by using solar energy. Two types of solar dryer were investigated, (1) solar dryer cabinet (SDC) and (2) solar dryer cabinet coupled with heater (SDCH) and were compared to the traditional sun dryer (SD) method. The results demonstrated that the use of SDCH could reduce the humidity of the Nipa leaves to 15.23 ± 0.78% within 2 hours. This result was statistically significant at 95% confident compared to those results obtained from SDC (49.91 ± 0.78%) and SD (38.66 ± 0.21%). The dried leaves obtained from the three drying methods were tested for bacterial contamination. For SD, the maximum bacteria contamination was 95,000 ± 40,414 cfu/piece which was higher than SDC (480 ± 173 cfu/piece) and SDCH (463 ± 112 cfu/piece) methods. The SDC and SDCH techniques were implemented at Palian river basin community (Ban Na Yod Tong Nipa Palm Leaf Handicraft) in Wang Won Sub-District, Kantang District,Trang Province, Thailand. These techniques could enhance the drying process of Nipa leaves and thus increase the production of Nipa bowls 3.5 times reducing Nipa waste up to 1.83 tons. The villagers could produce approximately 183,000 bowls/year generating an income of more than 55,800 USD for 60 families.

Sign in / Sign up

Export Citation Format

Share Document