scholarly journals Inheritance of quantitative traits in opium poppy (Papaver somniferum L.)

Genetika ◽  
2011 ◽  
Vol 43 (1) ◽  
pp. 113-128 ◽  
Author(s):  
H.K. Yadav ◽  
S.P. Singh
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Quantitative Traits ◽  
Recurrent Selection ◽  
Breeding Strategy ◽  
Flowering Plant ◽  
Plant Seed ◽  
Allelic Interaction ◽  
Almost All ◽  
Capsule Size

Generation mean analysis was carried out using five parameter model on five cross combinations with five generations i.e. parents, F1s, F2s, and F3s randomly selected from partial diallel breeding experiment. The aim of study was to investigate the mode of gene actions involved in the inheritance of quantitative traits viz. days to 50% flowering, plant height, leaves/plant, capsules/plant, capsule size, capsule weight/plant, seed yield/plant and opium yield/plant. C and D scaling test showed the presence of non allelic interaction in the inheritance for all the traits except for plant height, seed yield/plant (ND1001xIS13) and capsule size (NBR5xND1002) which showed non interacting mode of inheritance. In general, the interaction effect together i.e. additive x additive [i] and dominance x dominance [l] found in higher magnitude than the combined main effects of additive [d] and dominance [h] effects for all the traits in all the five crosses. Dominance effect [h] was found pronounced for most of the traits except days to 50% flowering where additive effect [d] was found prevalent. Among the interaction effects dominance x dominance [l] was predominant over additive x additive [i] for all traits in all the five crosses except capsules/plant and capsule size in cross ND1001xNBRI11 and leaves/plant and opium yield/plant in cross NBRI5xND1002. As per sign of dominance (h) and dominance x dominance (l) duplicate epistasis were noticed for all the traits except plant height and leaves/plant in cross ND1001xUO1285. Potence ratio indicated presence of over dominance for almost all the traits. Substantial amount of realized heterosis, residual heterosis in F2 and F3 progenies and high heritability with moderate to high genetic advance in F2 progeny and significant correlation among important traits in desirable direction were observed. A breeding strategy of diallel selective mating or biparental mating in early segregating generation followed by recurrent selection may be used for genetic improvement.

Association among genetic parameters in Indian mustard (Brassica juncea L. Czern and Coss.)

2018 ◽  
Vol 3 (01) ◽  
pp. 11-15
Author(s):  
Vipin Kumar Malik ◽  
Shiv Kumar Singh ◽  
Vijay Kumar ◽  
Norang Pal Singh ◽  
Ankit Malik ◽  
...  
Keyword(s):  
Brassica Juncea ◽  
Seed Yield ◽  
Seed Weight ◽  
Harvest Index ◽  
Indian Mustard ◽  
Flowering Plant ◽  
Genetic Advance ◽  
Gene Effects ◽  
Plant Seed ◽  
Biological Yield

The considerable amount of genetic variability on the basis of GCV and PCV estimates for the traits; days to 50% flowering, numbers of primary and secondary branches per plant, length of siliqua, 1000-seed weight, seed yield per plant, biological yield per plant and harvest index were found in thirty five genotypes of Indian mustard (Brassica juncea L. Czern and Coss). Heritability and genetic advance were higher for days to 50% flowering, plant height and biological yield per plant. Although, number of secondary branches per plant, seed yield per plant and harvest index had moderately high heritability with moderate genetic advance indicating additive gene effects and selection pressure could be applied on them for yield improvement leads to fast genetic improvement of the materials. Days to 75% maturity, length of siliqua, 1000-seed weight and oil content had low heritability indicating that these traits were under the influence of environmental factors and selection on the basis of these traits could not be effective.

Genetic components analysis in Indian mustard (Brassica juncea L. Czern and Coss) under Saharanpur districts

2019 ◽  
Vol 4 (01) ◽  
pp. 66-70
Author(s):  
Amit Tomar
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Oil Content ◽  
Indian Mustard ◽  
Test Weight ◽  
Plant Oil ◽  
Plant Seed ◽  
Days To Flowering ◽  
Genetic Components ◽  
Days To Maturity

Regression coefficient ‘b1’ deviated from unity for length of main raceme, Number of secondary branches per plant, test weight, oil content, Number of siliquae per plant, seed yield per plant. The estimates of additive components ( Dˆ ), dominance components ( 1 Hˆ and 2Hˆ ) were highly significant for days to flowering, days to maturity, plant height, length of main raceme, number of siliquae per plant, number of secondary branches per plant, oil content, test weight and seed yield per plant .All the estimates of Fˆ (mean of Fr value, where Fr is the proportion of negatives effects of Genes in rth parents) was positive and significant number of siliquae per plant, days to flowering, days to maturity, plant height and except for which is highly significant whereas days to maturity was negative and significant. The estimates of 2 hˆ were positive and highly significant for days to flowering, days to maturity, plant height, length of main raceme, oil content, test weight and seed yield per plant. The estimates of mean degree of dominance ( 1Hˆ / Dˆ ) 0.5 were more than unity for length of main raceme, number of secondary branches per plant, oil content, test weight and seed yield per plant.

Evaluation of morphological diversity of field pea [Pisum sativum subsp.arvense (L.)] germplasm under sub-tropical climate of Manipur

2016 ◽  
Author(s):  
S. Bhuvaneswari ◽  
Susheel Kumar Sharma ◽  
P. Punitha ◽  
K. S. Shashidhar ◽  
K. L. Naveenkumar ◽  
...  
Keyword(s):  
Seed Yield ◽  
Quantitative Traits ◽  
Principal Component ◽  
Morphological Diversity ◽  
Field Pea ◽  
Plant Seed ◽  
Diverse Field ◽  
Early Maturing ◽  
Linkage Method ◽  
Practical Field

An investigation was carried out to evaluate 51 diverse field pea genotypes at Langol Research farm, ICAR, RC, NEH region, Manipur centre for nine yield related quantitative traits and four morphological qualitative traits for practical field pea improvement in Manipur. The combined analysis of variance of genotypes for all the nine traits was found to be significant. The amount of variability in one variable as a linear function of another variable was also measured through phenotypic and genotypic correlation among nine quantitative traits. The pod number per plant, seed number per pod and 100 seed weight showed significant positive correlation with seed yield per plant both at phenotypic and genotypic levels. Multivariate analysis using principal component analysis (PCA) indicated that three principal components (PCs) accounted for > 75% of the total variation. The genotypes were grouped into seven clusters using distance based Agglomerative “Average linkage” method. Three genotypes IPF-5-19, EC-8495, HUDP-15 belonging to cluster II and DDR-30, early maturing variety belonging to Cluster VI were found promising in terms of seed yield for the region.

Analysis of gene effects governing yield and yield traits in pigeonpea (Cajanus cajan L.)

2016 ◽  
Vol 50 (3) ◽  
Author(s):  
R. S. Singh ◽  
M. N. Singh
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Cajanus Cajan ◽  
Dominant Gene ◽  
Gene Effects ◽  
Relative Contribution ◽  
Main Gene ◽  
Additive Gene ◽  
Almost All ◽  
Pod Length

The six generations (P<sub>1</sub>, P<sub>2</sub>, F<sub>1</sub>, F<sub>2</sub>, BC<sub>1</sub> and BC<sub>2</sub>) of twelve cross combinations of pigeonpea (<italic>Cajanus cajan</italic> L.) were studied during 2003-2006 for days to 50 % flowering, days to maturity, plant height, number of primary branches, number of secondary branches, pods per plant, pod length, number of seeds per pod, 100-seed weight, harvest index and seed yield per plant. The means of six generations were subjected to detect main gene effects and interactions. The estimates of six parameter model revealed that both additive and dominant gene effects were important in all the crosses for almost all the traits. However, the relative contribution of dominant gene effects was much higher than additive gene effects for plant height, pods per plant and seed yield per plant. Higher frequency of duplicate type of epistasis also confirms the prevalence of dominance gene effects for above traits except for seed yield per plant.

The optimum foliar zinc source and level for improving Zn content in seed of chickpea

2015 ◽  
Vol 38 (6) ◽  
Author(s):  
Nihal Kayan ◽  
Nurdilek Gulmezoglu ◽  
Mehmet Demir Kaya
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Harvest Index ◽  
Foliar Application ◽  
Seed Number ◽  
Plant Seed ◽  
Zn Content ◽  
Pod Number

The comparative effect of 0, 0.2, 0.4, 0.6 and 0.8% Zn levels of zinc chelate (Zn-EDTA; 8% Zn) and zinc sulfate (23% Zn) applied as foliar sprays for assuaging zinc deficiency of chickpea cv. Gökçe was evaluated under field condition. The sprays were applied on the plants before blooming stage during 2012 and 2013 growing seasons and seed yield, yield components like plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and mineral concentrations (nitrogen, phosphorus, zinc and iron) in seeds were investigated. Plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and seed yield were investigated. The results showed that increased zinc doses caused an increase in Zn content of seed, while seed yield was not affected similarly. In general, plant height, pod number and seed number per plant increased by the application of zinc. Lower dose of Zn-EDTA and higher dose of ZnSO<sub>4</sub> gave higher yield components. Seed weight, harvest index and seed yield were not significantly influenced by Zn sources and doses; however, mineral concentration of seeds enhanced when Zn doses were increased. It was concluded that foliar application of zinc resulted in an increase in seed mineral contents rather than seed yield of chickpea. The dose of 0.6% with Zn-EDTA was the optimum combination for Zn enrichment in seed of chickpea.

scholarly journals Studies on Genetic Diversity in Desi Chickpea (Cicer arietinum L.) using D2 Statistics

2021 ◽  
pp. 100-104
Author(s):  
Jakkam Mahipal Reddy ◽  
Gabrial M. Lal ◽  
Velugoti Priyanka Reddy ◽  
Subhadra Pattanayak ◽  
V. Rohith Guptha ◽  
...  
Keyword(s):  
Genetic Diversity ◽  
Cicer Arietinum ◽  
Seed Yield ◽  
Quantitative Traits ◽  
Direct Selection ◽  
Plant Seed ◽  
Cicer Arietinum L ◽  
Wide Range ◽  
Component Traits ◽  
Superior Genotypes

A trail was conducted during rabi 2020 to study genetic diversity among 36 favorable genotypes of chickpea (Cicer arietinum L.) with help of Mahalanobis D2 statistics. On the basis of D2 values, 36 genotypes were arranged into 5 clusters. The intra cluster distances were lower than inter-cluster distances, specifying that genotypes comprised within a cluster shows tendency to vary less apart from each other. Out of thirteen characteristics considered, secondary branches per plant, number of pods per plant, seed yield per plant, harvest index and plant height, contributed very much in relation to genetic divergence. Wide range of variability was noticed for quantitative traits. This suggested that the selection based on these characteristics would be valuable in improving the grain yield. Therefore, a direct selection based on seed yield and component traits may be practiced to choose superior genotypes which could be utilized in breeding program for the development of high yielding chickpea genotypes.

scholarly journals Inheritance of Some Quantitative Characters in Pigeonpeas (Cajanus cajan (L.) Mill sp.)

1969 ◽  
Vol 55 (1) ◽  
pp. 23-43
Author(s):  
Abad Morales Muñoz ◽  
Raúl Abrams
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Block Design ◽  
Flowering Plant ◽  
Frequency Distributions ◽  
Flowering Date ◽  
Randomized Block Design ◽  
Genotypic And Phenotypic Correlations ◽  
High Heritability

Three varieties and an irradiation-derived line of pigeonpeas were used as parents in five crosses as follows: P.I. 5690 X Kaki, P.I. 5690 X Saragateado, P.I. 5690 X 526, Kald X 526, and Saragateado X 526. The F2, F3 and parents of each cross were planted in the field at the Isabela Substation during 1966-67 in a randomized block design with three replicates. Genotypic variability was studied and genotypic and phenotypic correlations were calculated for all the crosses in the F2 and F3 generations. Genetic coefficients of variation and heritability estimates were computed for four traits in five crosses and for six traits in one particular cross. Frequency distributions are shown for date of flowering, plant height, and seed weight. There was much greater variation for all crosses, in general, in seed weight, plant height, and flowering date than in number of seeds per pod. With the exception of number of pods per plant the correlations between seed yield and other traits were not great enough to provide reliable indications for yield. The phenotypic and genotypic correlations between seed yield and number of pods per plant were high, above 0.90. However, their low heritability, 45.3 and 52.1 percent in F2 and F3 generations, tends to indicate that not too much progress could be expected for seed yield improvement by selecting for large number of pods per plant. Good progress by selection could be made by breeders in traits such as flowering date, plant height, and seed weight which showed high heritability values.

scholarly journals Genetic evaluation and characterization of jute (Corchorus spp. L) genotypes using DUS

2014 ◽  
Vol 10 (2) ◽  
pp. 147-153 ◽  
Author(s):  
A Das ◽  
D Kumar
Keyword(s):  
Plant Height ◽  
Seed Weight ◽  
Quantitative Traits ◽  
Genetic Advance ◽  
High Heritability ◽  
Qualitative Characters ◽  
Fibre Fineness ◽  
Almost All ◽  
Varietal Characterization

In this study 32 jute (Corchorus spp.) varieties comprised of 18 olitorius and 14 capsularis were evaluated and characterized for five quantitative and 12 qualitative characters as per revised official DUS Test Guidelines of Jute. The experimental materials were grown in a RBD with three replications at Baarrackpore, India during 2009-10. Significant differences among genotypes noted almost for almost all the quantitative traits. PCV and GCV were highest for 1000 seed weight (33.78 and 33.29%) followed by fibre fineness (27.11 and 26.70%). Low variability was recorded in case of plant height. All the five characters exhibited more or less high heritability coupled with high genetic advance as per cent over mean. Out of 12 qualitative characters studied, in C. capsularis 8 traits were monomorphic, 4 traits were dimorphic. However, in C. olitorius no trait was monomorphic, 6 traits were dimorphic and 6 traits were polymorphic among varieties indicating their potential for varietal characterization. DOI: http://dx.doi.org/10.3329/sja.v10i2.18335 SAARC J. Agri., 10(2): 147-153 (2012)

The relationship between seed yield and associated characters in meadow fescue (Festuca pratensis)

1966 ◽  
Vol 67 (2) ◽  
pp. 243-248 ◽  
Author(s):  
Joseph Lewis
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Dry Matter ◽  
Flowering Plant ◽  
Path Coefficient ◽  
Festuca Pratensis ◽  
Path Coefficient Analysis ◽  
Meadow Fescue ◽  
Matter Production ◽  
The Relationship

A study was made of phenotypic correlations between seed yield and some other traits of determinable value in two bred varieties of meadow fescue. Seed yield and such characters as time of flowering, plant height and dry-matter production of spaced plants in October and at the time of anthesis were found to be closely associated.The method of path coefficient analysis was used to study the interrelationships of seed yield and its components in the causal system: fertile tiller and floret numbers, percentage fertility and thousandseed weight. This analysis corroborates the result of simple correlations in showing the importance of fertile tiller numbers and fertility as major determinants of seed yield.

scholarly journals Andean Lupin Phenology and Agronomic Performance under Different Planting Dates in a Mediterranean Climate

Agronomy ◽  
2020 ◽  
Vol 10 (12) ◽  
pp. 2020
Author(s):  
Efstathia Lazaridi ◽  
George K. Papadopoulos ◽  
Penelope J. Bebeli
Keyword(s):  
Protein Content ◽  
Seed Yield ◽  
Crude Protein ◽  
Mediterranean Area ◽  
Growth Cycle ◽  
Flowering Plant ◽  
Crude Protein Content ◽  
Planting Dates ◽  
Plant Seed ◽  
Yield Production

Andean lupin in Europe has regained interest in recent years due to its high seed protein and oil content and its potential use for food, feed as well as a crop used in biorefineries. A search for suitable germplasm in combination with a determination of appropriate agronomical practices such as planting date are needed for commercial farming in new areas. The current study aims to evaluate the performance of six selected L. mutabilis accessions in a Mediterranean area using two different planting dates for two consecutive experimental years. A split plot design with accessions as subplots and planting dates as main plots was used. Measurements such as days to flowering, plant height, total number of pods and seeds per plant, seed yield and seed crude protein content were taken. All accessions performed better when cultivation started not later than the end of autumn since high temperatures occurred during late spring shortened the growth cycle and reduced yield. Earlier cultivation applied, in the middle of autumn, did not enhance significantly seed yield production. Among the accessions, LIB223 was characterized by the highest seed crude protein content in the early planting treatment, while accessions with prolonged growth cycle (LIB209, LIB214 and LIB223) produced higher seed yield than other accessions and could be further studied as promising breeding material for cultivation under the edaphoclimatic conditions tested.

Sign in / Sign up

Export Citation Format

Share Document