scholarly journals Structural and optical properties of HDPE implanted with medium fluences silver ions

2021 ◽  
Vol 53 (2) ◽  
pp. 187-198
Author(s):  
Milos Nenadovic ◽  
Danilo Kisic ◽  
Miljana Mirkovic ◽  
Snezana Nenadovic ◽  
Ljiljana Kljajevic
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Surface Composition ◽  
Silver Ions ◽  
Surface Region ◽  
Sample Surface ◽  
Phase Imaging ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

The implantation of high-density polyethylene (HDPE) has been conducted using Ag+ ions with energy of 60 keV, achieved fluences 1.5 and 10?1015 ions/cm2. Transmission electron microscopy (STEM) and field emission gun - scanning electron microscopy (FEG-SEM) showed the existence of nanoparticle clusters. X ray photoelectron spectroscopy (XPS) revealed the presence of silver in the sample surface region. The surface topography was studied by atomic force microscopy (AFM), while the surface composition uniformity was analyzed using phase imaging AFM. Optical characterization obtained by spectroscopic ellipsometry (SE) showed changes in refractive index, extinction coefficient and the optical band gap with the fluence of implanted ions.

Thermal Stability and Analysis of Laser Deposited Platinum Films

2000 ◽  
Vol 624 ◽  
Author(s):  
G.J. Berry ◽  
J.A. Cairns ◽  
M.R. Davidson ◽  
Y.C. Fan ◽  
A.G. Fitzgerald ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Photoelectron Spectroscopy ◽  
Elevated Temperatures ◽  
Surface Composition ◽  
Direct Write ◽  
Force Microscopy ◽  
Annealing Conditions ◽  
Atomic Force ◽  
Transmission Electron ◽  
Induced Decomposition

ABSTRACTAs the trend towards device miniaturisation continues, surface effects and the thermal stability of metal deposits becomes increasingly important. We present here a study of the morphology and composition of platinum films, produced by the UV-induced decomposition of organometallic materials, under various annealing conditions. The surface composition of the metal deposits was studied by X-ray photoelectron spectroscopy, both as-deposited and following thermal treatment. In addition, the morphology of the surface was studied by atomic force microscopy which enabled the investigation of film restructuring. These studies were performed over a range of temperatures up to 1000°C in air and up to 600°C in reducing environments. Complementary information regarding the film morphology has been obtained from transmission electron microscopy. The data has been used to provide an insight into the effects of elevated temperatures on metal films deposited by a direct write method

Electroless Synthesis of 1.4 nm Pd and Pt Nanoparticles on Self-Assembled Rosette Nanotubes

2011 ◽  
Vol 1301 ◽  
Author(s):  
Rahul Chhabra ◽  
Hicham Fenniri
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Pt Nanoparticles ◽  
Hierarchical Organization ◽  
X Ray ◽  
Force Microscopy ◽  
Rosette Nanotubes ◽  
Atomic Force ◽  
Transmission Electron ◽  
Self Assembled

ABSTRACTElectroless synthesis and hierarchical organization of 1.4 nm Pd and Pt nanoparticles (NPs) on self-assembled Rosette Nanotubes (RNTs) is described. The nucleated NPs are nearly monodisperse and reveal supramolecular organizations guided by RNT templates. Interestingly, the narrow size distribution is attributable to unique templating behavior of RNTs. The resulting metal NP-RNT composites were characterized by Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM). X-ray Photoelectron Spectroscopy (XPS) was also performed to confirm the nature and composition of RNT-templated NPs.

scholarly journals Use of Atomic Force Microscopy and Transmission Electron Microscopy for Correlative Studies of Bacterial Capsules

2008 ◽  
Vol 74 (17) ◽  
pp. 5457-5465 ◽  
Author(s):  
Oleg Stukalov ◽  
Anton Korenevsky ◽  
Terry J. Beveridge ◽  
John R. Dutcher
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Atomic Force Microscopy ◽  
Shewanella Oneidensis ◽  
Geobacter Sulfurreducens ◽  
Phase Imaging ◽  
Tem Analysis ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

ABSTRACT Bacteria can possess an outermost assembly of polysaccharide molecules, a capsule, which is attached to their cell wall. We have used two complementary, high-resolution microscopy techniques, atomic force microscopy (AFM) and transmission electron microscopy (TEM), to study bacterial capsules of four different gram-negative bacterial strains: Escherichia coli K30, Pseudomonas aeruginosa FRD1, Shewanella oneidensis MR-4, and Geobacter sulfurreducens PCA. TEM analysis of bacterial cells using different preparative techniques (whole-cell mounts, conventional embeddings, and freeze-substitution) revealed capsules for some but not all of the strains. In contrast, the use of AFM allowed the unambiguous identification of the presence of capsules on all strains used in the present study, including those that were shown by TEM to be not encapsulated. In addition, the use of AFM phase imaging allowed the visualization of the bacterial cell within the capsule, with a depth sensitivity that decreased with increasing tapping frequency.

Carbon nanotubes and metalloporphyrins and metallophthalocyanines-based materials for electroanalysis

2012 ◽  
Vol 16 (07n08) ◽  
pp. 713-740 ◽  
Author(s):  
José H. Zagal ◽  
Sophie Griveau ◽  
Mireya Santander-Nelli ◽  
Silvia Gutierrez Granados ◽  
Fethi Bedioui
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Hybrid Materials ◽  
Photoelectron Spectroscopy ◽  
State Of The Art ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Walled Carbon Nanotubes

We discuss here the state of the art on hybrid materials made from single (SWCNT) or multi (MWCNT) walled carbon nanotubes and MN4complexes such as metalloporphyrins and metallophthalocyanines. The hybrid materials have been characterized by several methods such as cyclic voltammetry (CV), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM) and scanning electrochemical microscropy (SECM). The materials are employed for electrocatalysis of reactions such as oxygen and hydrogen peroxide reduction, nitric oxide oxidation, oxidation of thiols and other pollutants.

scholarly journals Ultrashort Pulsed Laser Ablation of Magnesium Diboride: Plasma Characterization and Thin Films Deposition

2015 ◽  
Vol 2015 ◽  
pp. 1-9 ◽  
Author(s):  
Angela De Bonis ◽  
Agostino Galasso ◽  
Antonio Santagata ◽  
Roberto Teghil
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Optical Emission ◽  
Silicon Substrates ◽  
X Ray Diffraction ◽  
Laser Target ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron

A MgB2target has been ablated by Nd:glass laser with a pulse duration of 250 fs. The plasma produced by the laser-target interaction, showing two temporal separated emissions, has been characterized by time and space resolved optical emission spectroscopy and ICCD fast imaging. The films, deposited on silicon substrates and formed by the coalescence of particles with nanometric size, have been analyzed by scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy, micro-Raman spectroscopy, and X-ray diffraction. The first steps of the films growth have been studied by Transmission Electron Microscopy. The films deposition has been studied by varying the substrate temperature from 25 to 500°C and the best results have been obtained at room temperature.

scholarly journals Facile Synthesis of Highly Conductive Vanadium-Doped NiO Film for Transparent Conductive Oxide

2020 ◽  
Vol 10 (16) ◽  
pp. 5415
Author(s):  
Ashique Kotta ◽  
Hyung Kee Seo
Keyword(s):  
Electron Microscopy ◽  
Nickel Oxide ◽  
Photoelectron Spectroscopy ◽  
Transparent Conductive Oxide ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Conductive Oxide ◽  
P Type

Metal-oxide-based electrodes play a crucial role in various transparent conductive oxide (TCO) applications. Among the p-type materials, nickel oxide is a promising electrically conductive material due to its good stability, large bandgap, and deep valence band. Here, we display pristine and 3 at.%V-doped NiO synthesized by the solvothermal decomposition method. The properties of both the pristine and 3 at.%V:NiO nanoparticles were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffractometry (XRD), Raman spectroscopy, ultraviolet–visible spectroscopy (UV–vis), and X-ray photoelectron spectroscopy (XPS). The film properties were characterized by atomic force microscopy (AFM) and a source meter. Our results suggest that incorporation of vanadium into the NiO lattice significantly improves both electrical conductivity and hole extraction. Also, 3 at.%V:NiO exhibits a lower crystalline size when compared to pristine nickel oxide, which maintains the reduction of surface roughness. These results indicate that vanadium is an excellent dopant for NiO.

DISPERSITY AND STABILITY MEASUREMENT OF FUNCTIONALIZED MULTIWALLED CARBON NANOTUBES IN ALCOHOLS

2008 ◽  
Vol 22 (25) ◽  
pp. 2493-2501 ◽  
Author(s):  
HUN-SIK KIM ◽  
MINSUNG KANG ◽  
WON-IL PARK ◽  
DON-YOUNG KIM ◽  
HYOUNG-JOON JIN
Keyword(s):  
Electron Microscopy ◽  
Carbon Nanotubes ◽  
Multiwalled Carbon Nanotubes ◽  
Photoelectron Spectroscopy ◽  
Multiwalled Carbon ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Stability Measurement ◽  
The Stability

Multiwalled carbon nanotubes (MWCNTs) were dispersed in various alcohols such as methanol, ethanol and isopropanol using ultrasonication. In order to disperse the MWCNTs in the alcohols, they were treated using a mixture of H 2 SO 4 and HNO 3 (3 : 1, vol/vol). The concentration of MWCNTs was approximately 0.03 wt.% and they formed a homogeneous dispersion in the alcohol solutions. The functional groups introduced on the surface of the MWCNTs during the acid treatment were characterized by Fourier transform-infrared spectroscopy and X-ray photoelectron spectroscopy. The dispersibility of the MWCNTs in the alcohols was characterized using atomic force microscopy, scanning electron microscopy and transmission electron microscopy. The stability of the MWCNT dispersions was also measured using a recently developed optical analyzer (Turbiscan).

scholarly journals Hydrophobic Epoxy Caged Silsesquioxane Film (EP-POSS): Synthesis and Performance Characterization

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 472
Author(s):  
Yanhong Fang ◽  
Ping Wang ◽  
Lifang Sun ◽  
Linhong Wang
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Mechanical Performance ◽  
Solar Panels ◽  
Scanning Calorimetry ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Surface Micromorphology ◽  
And Performance

Hydrophobic films are widely used in aerospace, military weapons, high-rise building exterior glass, and non-destructive pipeline transportation due to their antifouling and self-cleaning properties. This paper details the successful preparation of hydrophobic epoxy caged sesquioxane (EP-POSS) via two steps of simple organic synthesis, along with studies on the effects of viscosity and reaction time on the reaction. Interestingly, the EP-POSS presented a large contact angle of 125°, indicating its excellent hydrophobicity. The surface micromorphology was observed via FE-SEM (field emission scanning electron microscopy), transmission electron microscopy (TEM), and atomic force microscopy (AFM), and the structural composition and elemental contents were analyzed via X-ray photoelectron spectroscopy (XPS) and energy-dispersive spectrometry (EDS). Thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) tests showed that EP-POSS had excellent thermal properties, and the first degradation reaction occurred at 354 °C. The mechanical performance and abrasion resistance results demonstrated that EP-POSS could be used in solar panels.

scholarly journals Thermal Degradation and Combustion Behaviors of Polyethylene/Alumina Trihydrate/Graphene Nanoplatelets

Polymers ◽  
2019 ◽  
Vol 11 (5) ◽  
pp. 772 ◽  
Author(s):  
Chunfeng Wang ◽  
Jihua Wang ◽  
Zhenlong Men ◽  
Yongliang Wang ◽  
Zhidong Han
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Expanded Graphite ◽  
Graphene Nanoplatelets ◽  
X Ray ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Combustion Behaviors ◽  
Alumina Trihydrate

Graphene nanoplatelets (GNPs) were prepared from expanded graphite (EG) with fully exfoliated structure via ball milling coupled with ultrasonication. The structure of multi-layered GNPs was characterized with transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray diffraction (XRD), atomic force microscopy (AFM) and Raman spectroscopy. By compounding alumina trihydrate (ATH) with GNPs, the well dispersed mixture of ATH/GNP was obtained, and it showed high flame retardant effectiveness in polyethylene (PE). The peak heat release rate (peak-HRR) decreased by 20% was proven by a cone calorimeter with the addition of GNPs as low as 0.2 wt % in PE/ATH. The results of thermogravimetric analysis (TG) illustrated the improved thermal stability and lower weight loss rate of PE/ATH/GNP than PE/ATH. A protective char with GNPs was evidenced by SEM and X-ray photoelectron spectroscopy (XPS). The well exfoliated structure and good dispersion of GNPs accounted for the formation of effective barrier, which made a profound contribution to the enhanced flame retardancy.

Charge Transport in Silicon Nanocrystal Arrays

2004 ◽  
Vol 832 ◽  
Author(s):  
R. Krishnan ◽  
Q. Xie ◽  
J. Kulik ◽  
X.D. Wang ◽  
T.D. Krauss ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Charge Transport ◽  
Photoelectron Spectroscopy ◽  
Electrostatic Force ◽  
Silicon Layer ◽  
Force Microscopy ◽  
Atomic Force ◽  
Transmission Electron ◽  
Scanning Transmission

ABSTRACTSingle layers of isolated, size-controlled silicon nanocrystals were prepared by thermal crystallization of a thin amorphous silicon layer sandwiched between silicon dioxide layers. A subsequent oxidation treatment ensured controlled increase in their lateral separation. The size of the nanocrystals, separation of the nanocrystals (from < 1 nm to ∼ 4 nm), stoichiometry of the resulting oxide and surface morphology were monitored with transmission electron microscopy, scanning transmission electron microscopy, atomic force microscopy, and x-ray photoelectron spectroscopy. Mesoscopic charge transport studies performed with an electrostatic force microscope (EFM) revealed rapid lateral transport of charges when the nanocrystals were tightly packed (< 1 nm average separation) and interconnected. As the inter-nanocrystal separation was increased, lateral charge transport was rapidly suppressed. Nanocrystals separated by up to 3.6 nm retained the injected charges in a well-defined localized region (∼ 62 nm diameter region) for a time of the order of several days. The ability to switch from a very short to a very long retention time using the same structure by simply changing the post-growth processing conditions is attractive for various applications involving charge transport and localization.

Sign in / Sign up

Export Citation Format

Share Document