scholarly journals Improvement of the installation technology of heat pumps for heating buildings by the method of fan-type arrangement of geothermal probes

2021 ◽  
Vol 18 (1) ◽  
pp. 83-89
Author(s):  
Yu. N. Kazakov ◽  
◽  
O. A. Timoschuk ◽  
A. A. Zavalnuk ◽  
◽  
...  
Keyword(s):  
New Technology ◽  
Residential Building ◽  
Heat Pumps ◽  
Vertical Wells ◽  
Drilling Rig ◽  
The Cost ◽  
Installation Technology

The article presents the results of improving the currently used technology for installing heat pumps. A new technology for geothermal probes` installation by inclined cluster drilling using the UNB-3 drilling rig is proposed. The authors prove that the advantages and novelty of this technology are as follows: small installation dimensions; drilling is carried out from one place on a small site with a diameter of only 1.5 m; only 2-3 workers are needed to complete the task; arranging wells by this method is 40-43% cheaper than arranging vertical wells. The cost of cluster drilling using the UNB-3 drilling rig for an individual residential building is 35-43% lower than the cost of drilling vertical wells for the same building.

Effects and Risks of Distance Learning in Higher Education

2020 ◽  
pp. 61-73
Author(s):  
Yu. M. Tsygalov
Keyword(s):  
Higher Education ◽  
Distance Learning ◽  
Online Education ◽  
New Technology ◽  
Negative Consequences ◽  
Higher Education System ◽  
First Results ◽  
Spread Of Infection ◽  
The Cost

The forced work of Russian universities remotely in the context of the pandemic (COVID-19) has generated a lot of discussion about the benefits of the new form of education. The first results were summed up and reports were presented, the materials of which showed that the main goal of online education — the prevention of the spread of infection, - has been achieved. Against this background, proposals and publications have appeared substantiating the effectiveness of the massive introduction of distance learning in Russia, including in higher education. However, the assessment of such training by the population and students in publications and in social networks was predominantly negative and showed that the number of emerging problems exceeds the possible benefits of the new educational technology. Based on the analysis of the materials of publications and personal experience of teaching online, the potential benefits and problems of distance learning in higher education in Russia are considered. It is proposed to consider the effects separately for the suppliers of new technology (government, universities) and consumers (students, teachers, society). It is substantiated that the massive introduction of online education allows not only to reduce the negative consequences of epidemics, but also to reduce budgetary funding for universities, optimize the age composition of teachers, and reduce the cost of maintaining educational buildings. However, there will be a leveling / averaging of the quality of education, and responsibility for the quality of training will shift from the state/universities to students. The critical shortcomings of online education are the low degree of readiness of the digital infrastructure, the lack of a mechanism for identifying and monitoring the work of students, information security problems, and the lack of trust in such training of the population. The massive use of online education creates a number of risks for the country, the most critical of which is the destruction of the higher education system and a drop in the effectiveness of personnel training. The consequences of this risk realization are not compensated by any possible budget savings.

Mechanical Analysis of Warm Extrusion Precision Forming on 42CrMo Steel Cutting Pick

2012 ◽  
Vol 538-541 ◽  
pp. 1061-1066 ◽  
Author(s):  
Chun Jian Su ◽  
Quan Lan Li ◽  
Lin Jing Xiao ◽  
Su Min Guo
Keyword(s):  
New Technology ◽  
Mechanical Analysis ◽  
Extrusion Force ◽  
Factors Affecting ◽  
42Crmo Steel ◽  
Pick Body ◽  
Mining Tool ◽  
Main Factors ◽  
The Cost ◽  
Warm Extrusion

Cutting pick is a kind of widely-used consumptive mining tool. The traditional producing technics of cutting pick body is foundry, or machining after roughly forging, or machining directly from metal bar. By former technics, the property of products is poor, and by latter, the material availability is low and the cost is high. The patent technology for cutting pick body warm extrusion introduced in this paper can overcome all the disadvantages mentioned above. In this paper, by analyzing the characteristic of cutting pick body warm extrusion, adopting the principle of power balance to solve the approximate solution of strain forces, the approximate calculating formulas of extruding power are deduced. The main factors affecting on extrusion force are determined theoretically. This research can be used as basis to design tooling and choose proper equipment for this new technology.

RENEWABLE ENERGY INTEGRATION FOR HOT WATER SUPPLY AND HEATING OF BUILDINGS

2021 ◽  
pp. 3-12
Author(s):  
Yu. Selikhov ◽  
K. Gorbunov ◽  
V. Stasov
Keyword(s):  
Solar Energy ◽  
Heat Production ◽  
Heat Supply ◽  
Alternative Energy ◽  
Fossil Fuel ◽  
Heat Pumps ◽  
Climatic Conditions ◽  
Economic Feasibility ◽  
Hot Water ◽  
The Cost

Solar energy is widely used in solar systems, where economy and ecology are combined. Namely, this represents an important moment in the era of depletion of energy resources. The use of solar energy is a promising economical item for all countries of the world, meeting their interests also in terms of energy independence, thanks to which it is confidently gaining a stable position in the global energy sector. The cost of heat obtained through the use of solar installations largely depends on the radiation and climatic conditions of the area where the solar installation is used. The climatic conditions of our country, especially the south, make it possible to use the energy of the Sun to cover a significant part of the need for heat. A decrease in the reserves of fossil fuel and its rise in price have led to the development of optimal technical solutions, efficiency and economic feasibility of using solar installations. And today this is no longer an idle curiosity, but a conscious desire of homeowners to save not only their financial budget, but also health, which is possible only with the use of alternative energy sources, such as: double-circuit solar installations, geothermal heat pumps (HP), wind power generators. The problem is especially acute in the heat supply of housing and communal services (HCS), where the cost of fuel for heat production is several times higher than the cost of electricity. The main disadvantages of centralized heat supply sources are low energy, economic and environmental efficiency. And high transport tariffs for the delivery of energy carriers and frequent accidents on heating mains exacerbate the negative factors inherent in traditional district heating. One of the most effective energy-saving methods that make it possible to save fossil fuel, reduce environmental pollution, and meet the needs of consumers in process heat is the use of heat pump technologies for heat production.

scholarly journals Intelligent Devices in Rural Wireless Networks

2014 ◽  
Vol 2 (4) ◽  
pp. 23-30
Author(s):  
Daniel Fuentes ◽  
Rosalía Laza ◽  
Antonio Pereira
Keyword(s):  
Wireless Networks ◽  
System Architecture ◽  
New Technologies ◽  
New Technology ◽  
Internet Access ◽  
Age Group ◽  
Experience Level ◽  
The World ◽  
Intelligent Devices ◽  
The Cost

The rural wireless networks are increasingly in demand by associations and autarchies to expand Internet access in this type of areas. The problem of such solutions centers not only in network deployment and its maintenance, but also in the equipment installation on clients, which always has big costs. This installation and configuration must be performed by a technician on site, so that the equipment can be integrated in the infrastructure. To try to mitigate this problem, it is presented a solution that allows the clients to install, with transparency, the device at home, reducing not only the cost for the management entity but also for the clients. This way, for info-excluded people or with new technology low experience level, it is the user that integrates himself in the network, making him part of the process, fostering the network usage.In this article are specified not only the system architecture but also the way that it works and how it obtains the desirable result. The tests made to the solution show the quickness, reliability and autonomy in the execution of the tasks, making it a benefit for rural wireless networks.This solution, by its robustness and simplicity, allowed an uptake to the IT by people who never thought to do it, namely an advanced age group (elderly) who want to join the world of the new technologies

scholarly journals Research on Technical Points of Installation and Construction of Mechanical and Electrical Engineering

2018 ◽  
Author(s):  
Ze Li ◽  
Li Li Wang ◽  
Subin Subin Li ◽  
Xinjing Xinjing Zhang ◽  
Guosen Zhou
Keyword(s):  
Rapid Development ◽  
Engineering Industry ◽  
Construction Technology ◽  
Quality And Safety ◽  
Construction Engineering ◽  
Architectural Engineering ◽  
The Cost ◽  
Installation Technology ◽  
Building Engineering ◽  
Electrical Installation

With the rapid development of China's overall economy, the construction engineering industry is gradually improving. Architectural engineering is an important environment for people to live, and its quality and safety are directly related to people's life and property. The most important part of the construction project is the mechanical and electrical installation, to realize the cost control of the project is the key point of the project. This article mainly explains the mechanical and electrical installation engineering in building engineering, and introduces the installation and construction technology in mechanical and electrical installation engineering in detail, and analyzes the control difficulties. It provides an important reference for the management of mechanical and electrical installation technology in the future.

scholarly journals Financial stability management as a determinant of competitive development of agrarian formations

2019 ◽  
pp. 13-18
Author(s):  
Nadiia HRYSHCHUK
Keyword(s):  
Financial Stability ◽  
Production Cost ◽  
New Technology ◽  
Fixed Costs ◽  
Qualitative Characteristic ◽  
Agricultural Enterprises ◽  
Cost Of Production ◽  
Labor Resources ◽  
The Cost

The article investigates financial stability as a qualitative characteristic of functioning of agricultural enterprises in modern conditions, the analysis of indicators of financial stability of the enterprise and determination of its type, as well as the effectiveness of forecasting the financial stability of agricultural enterprises. A number of measures is proposed, which is to reduce the cost of production (cost-saving strategy), which will allow agribusinesses to increase competitiveness in the market due to the introduction of new technology, technologies, more rational the use of both material and labor resources, reducing the proportion of fixed costs in the cost of production, in proportion to the increase in profits and competitive development of agricultural enterprises. The basic condition for ensuring the financial stability of the company is the formation of sufficient amounts of funds that enable them to fully fulfill their obligations to the budget, pay employees, creditors, suppliers.

scholarly journals Genetically Modified Potato for Pest Resistance: Thrift or Threat?

2021 ◽  
Author(s):  
Martin Raspor ◽  
Aleksandar Cingel
Keyword(s):  
Insect Pests ◽  
Genetically Modified ◽  
New Technology ◽  
Single Gene ◽  
Genetically Modified Crops ◽  
Pest Resistance ◽  
Potato Production ◽  
Bt Toxin ◽  
Long Term Impact ◽  
The Cost

Significant limitations in potato production are crop loss due to the damage made by insect pests, and the cost of enormous amount of chemicals, harmful to humans and environment, extensively used in their control. As an alternative, development of genetically modified potato offered possibility for pest management in a more sustainable, environmentally friendly way. Over the past 30 years introduction of pest resistance traits progressed from a single gene to multiple stacked events and from Bt-toxin expression to expression of proteins from non-Bt sources, dsRNA and their combination, while advances in molecular biology have brought “cleaner” gene manipulation technologies. However, together with benefits any new technology also bears its risks, and there are still a range of unanswered questions and concerns about long-term impact of genetically modified crops – that with knowledge and precautionary approaches can be avoided or mitigated. Sustainability of genetically modified crops for pest control largely depends on the willingness to gain and implement such knowledge.

scholarly journals Efficient central heating and modern heat sources

2013 ◽  
Vol 7 (4) ◽  
pp. 28-33
Author(s):  
Monika Pawlita
Keyword(s):  
Energy Saving ◽  
Calorific Value ◽  
Cost Effective ◽  
Weather Conditions ◽  
Heating System ◽  
Heat Pumps ◽  
Single Family ◽  
Heating Source ◽  
The Cost ◽  
Family House

Background: The methods of heating houses with system components determine the energy-saving systems. Energy-saving solutions allow to maintain comfortable conditions in the house, while minimizing the cost associated with its operation and at the same time helping to protect natural environment. The examples of such solutions include condensing boilers, heat pumps and solar collectors.Material and methods: The object of the analysis in this paper is typical single-family house occupying the area of 150 m². The comparison of analyzed heating system for a single-family house, including modern energy sources, allows the assessment of the most cost-effective method of heating. Results: Choosing rational method of heating for a single-family house is dictated mainly by economic reasons. The efficiency of the heating sources is also very important. In addition, an important factor is a heating period, which depends on the weather conditions in a given year.Conclusions: The costs of fuel/energy are still growing. Fuel selection is determined mainly by fuel calorific value and the price. To select the type of the heating source one must take into account the cost of kWh of heat.

Investment Strategies for Sourcing a New Technology in the Presence of a Mature Technology

2021 ◽  
Author(s):  
Wei Zhang ◽  
Hsiao-Hui Lee
Keyword(s):  
Operations Management ◽  
New Technologies ◽  
New Technology ◽  
Investment Strategy ◽  
Profit Sharing ◽  
Development Effort ◽  
Investment Strategies ◽  
Cost Shifting ◽  
The One ◽  
The Cost

To stay competitive, high-technology manufacturers not only frequently source new technologies from their suppliers, but also financially support the development of these new technologies into component products or production tools. We consider a manufacturer that can either source a new but immature technology from a financially constrained supplier, or source a mature technology from an existing supplier if and only if the development of the new technology fails. To support the new technology, the manufacturer can choose to inject capital in the form of an equity or loan. The investment strategy not only affects the new supplier’s development effort and the probability of technical success (PTS), but also affects the existing supplier’s effort to improve the mature technology, which presents the manufacturer with a trade-off. Following the debt financing literature, we find that a loan contract is associated with a cost-shifting effect and often leads to a higher PTS. However, because the manufacturer not only maintains an investment but also a procurement relationship with the new supplier, we find a profit-sharing effect associated with an equity investment, which does not exist in the traditional equity issuance literature. In particular, we show that the profit-sharing effect can dominate the cost-shifting effect and lead to a higher PTS when the new supplier’s technological capability is sufficiently high. Nonetheless, we also show that the strategy that derives a higher PTS does not necessarily generate a higher payoff for the manufacturer. On the one hand, a loan can be preferred even when it leads to a lower PTS because the cost-shifting effect allows the manufacturer to offer a sufficiently low procurement payment while maintaining a sufficiently high PTS. On the other hand, when the existing supplier is very capable of reducing its costs, a loan can over-incentivize the new supplier to exert excessive effort and backfire. This paper was accepted by Charles Corbett, operations management.

Cyberdefence of Offshore Deepwater Drilling Rigs

2021 ◽  
Author(s):  
Paola Rossi ◽  
Itai Sela ◽  
Adam Rizika ◽  
Diogenes Angelidis ◽  
Mark Duck ◽  
...  
Keyword(s):  
New Technology ◽  
Remote Access ◽  
Legacy Systems ◽  
Short Term ◽  
Deep Dive ◽  
Deepwater Drilling ◽  
Drilling Rig ◽  
Alternative Methodology ◽  
Drilling Rigs ◽  
Penetration Tests

Abstract An alternative methodology using new preventative technology to manage cybersecurity exposure on deepwater drilling rig assets is presented. For the past two years Shell's Deepwater Wells business has been evaluating typical cyber defence approaches and undertaken cybersecurity risk assessments and penetration tests. These activities have demonstrated the challenges attaining cybersecure drilling rig environments. Whilst cyberattacks increase in frequency, adaptability, and become cheaper to launch, regulatory and liability insurance requirements are also evolving. To achieve the goal of cyber-resilience, a major Operator has collaborated with a cybersecurity firm to trial technology for rapidly and reliably protecting deepwater rigs. The paper presents aspects of the numerous challenges faced and offers a different approach using new technology applied to both supplement and accelerate the attainment of a cyber-resilient environment onboard deepwater drilling rigs. It shares the deep dive lessons learnt leading to a more comprehensive understanding of how to protect drilling rigs and their safety critical control systems. Aside from addressing technical attributes using risk vs. maturity based methods, the approach also caters to business demands of short term rig contracts, managing multi-vendor legacy systems and satisfying increasing digitalisation/remote access needs with associated reductions in overall cybersecurity CAPEX spend.

Sign in / Sign up

Export Citation Format

Share Document