scholarly journals Pengaruh variasi campuran bahan bakar pertamax dan bioetanol 99,9% terhadap torsi mesin bensin 4 langkah Tecquipment TD201

2021 ◽  
Vol 10 (2) ◽  
Author(s):  
A. Yudi Eka Risano ◽  
Herry Wardono ◽  
Gunawan Poniton R.P. Sihombing
Keyword(s):  
Engine Speed ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Engine Torque ◽  
Valve Opening ◽  
Total Productivity ◽  
Dehydration Processes

Bioethanol is ethanol made from plants such as cassava, sugarcane, sago, which are processed through hydrolysis, fermentation, distillation and dehydration processes. Lampung Province is one of the largest producers of cassava in Indonesia, with the total productivity of 5,451,312 tons in 2017, and 6,683,758 tons in 2018 or there was an increase of 22,61% compared to 2017. From this data, it is possible to produce bioethanol, where every 1 kg of cassava can produce 0,106 liters of bioethanol. This is what underlies this research to investigate the effect of blending bioethanol of 99% with pertamax and bioethanol on the engine torque. Blending bioethanol of 99% can homogeusly mix. The engine used in this study is a Kohler gasoline engine equipped with a VDAS (Versatile Data Accession System) instrument unit in determining the parameters of engine performance. The blending of bioethanol of 99% as big as 14% (E14) gave the highest value of torque at 1 rotation of dynamometer valve opening and engine speed of 2000 rpm.

Experimental Investigation of a Gasoline-to-LPG Converted Engine Performance at Various Injection and Cylinder Pressures with Respect to Propane Spray Structures

2013 ◽  
Vol 315 ◽  
pp. 20-24 ◽  
Author(s):  
Taib Iskandar Mohamad ◽  
Mark Jermy ◽  
Matthew Harrison
Keyword(s):  
Experimental Investigation ◽  
Atmospheric Pressure ◽  
Gasoline Engine ◽  
Imaging Techniques ◽  
Engine Performance ◽  
Power Reduction ◽  
Injection System ◽  
Fuel Injector ◽  
Engine Torque ◽  
Efficiency Increase

Power reduction when converting a gasoline engine to propane can be mitigated by designing an injection system so the heat required for evaporation of the propane is drawn from the intake air. Air is cooled and densified, resulting in volumetric efficiency increase. LPG sprays were imaged using Mie and LIF imaging techniques from a port fuel injector, and from long and short connecting pipes. Images were taken in an optically-accessed pressure chamber at atmospheric pressure and fuel pressures of 1.5 MPa. Images of the pipe-coupled injection spray show significant evaporation in the pipe, whose amount depend on the length and diameter of the pipe. The duration of the LPG pulse at the manifold end is, for 300mm pipes, five times the original duration at the injector, and even greater for 600mm pipes. The narrow sprays and the amount of evaporation that occurs before the fuel enters the manifold explains the differences in engine torque and in-cylinder mixture temperature with the different systems.

scholarly journals Pengaruh Campuran Bahan Bakar Pertalite-Bioetanol Biji Sorghum pada Mesin Bensin

2020 ◽  
Vol 9 (2) ◽  
pp. 91
Author(s):  
Abdi Hanra Sebayang ◽  
Husin Ibrahim ◽  
Surya Dharma ◽  
Arridina Susan Silitonga ◽  
Berta Br Ginting ◽  
...  
Keyword(s):  
Fossil Fuels ◽  
Gasoline Engine ◽  
Raw Materials ◽  
Engine Performance ◽  
Exhaust Gas ◽  
Engine Exhaust ◽  
Engine Torque ◽  
Fuel Blends ◽  
Exhaust Gas Emission ◽  
Hc Emissions

The depletion of fossil fuels, rising of earth temperatures and declining of air quality are an unavoidable phenomenon today. Bioethanol fuel is one solution to reduce this problem that comes from renewable raw materials. The purpose of this study is to investigate engine performance and exhaust emissions at gasoline engine by using the sorghum seeds bioethanol-pertalite blends with different mixed ratios (10%, 15%, and 20%). The test is performed on a four-stroke gasoline engine without modification. Engine speeds vary from 1000 to 4000 rpm, and properties of the sorghum seeds bioethanol-pertalite blends are measured and analyzed. In addition, engine torque, brake power, brake specific fuel consumption (BSFC) and brake thermal efficiency (BTE) as well as carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NOx) emissions are measured. The results show that BSFC decreased while BTE increased for a fuel blends containing 20% bioethanol at 3500 rpm engine speed, with each maximum value of 246.93 g/kWh and 36.28%. It is also found that CO and HC emissions are lower for the sorghum seeds bioethanol-pertalite blends. Based on the research results, it can be concluded that the sorghum seeds bioethanol-pertalite blends can improve engine performance and reduce exhaust gas emissions. Keywords: bioethanol; pertalite; performance engine; exhaust gas emission; alternatif fuel.

scholarly journals PENGHEMAT BAHAN BAKAR DENGAN MENGGUNAKAN PIPA KATALIS METODE HYDROCARBON CRACK SYSTEM GANDA PADA SEPEDA MOTOR 4 TAK 160 CC

2019 ◽  
Vol 2 (2) ◽  
pp. 1
Author(s):  
Sena Mahendra ◽  
Fahmy Fatra ◽  
Akhmad Riszal Riszal ◽  
Didik Rohmantoro
Keyword(s):  
Fuel Consumption ◽  
Engine Speed ◽  
Engine Performance ◽  
Fuel Saving ◽  
Pipe Length ◽  
Engine Torque ◽  
Fuel Prices ◽  
Performance Time ◽  
In Series ◽  
High Octane

Motorized vehicles with economical fuel, agile, fast, and practical are some of the main factors consumers determine the choice of buying a motorcycle. People who own motorcycles under 2000 have not been equipped with fuel-saving devices, so they are wasteful of fuel and must be smart to save fuel. Many motorcycle manufacturers release the newest fuel-efficient products, but they affect the engine's performance. The price of premium fuel types is Rp. 6,500.00 per liter, petalite Rp. 7,600.00 per liter, firstly Rp. 8,900.00 per liter, and Pertamax turbo Rp. 10,100.00 per liter. High fuel prices encourage researchers to make various fuel-saving innovations. The purpose of this study is to develop an HCS catalyst pipe design double spiral model arranged in series to save fuel above 67% on a 4 stroke motorcycle without affecting the engine performance. The research method uses independent variables with engine speed, pipe length, pipe diameter, and Pertamax volume. Dependent variable by testing engine torque and power, fuel consumption time, temperature, and noise of the 156.7cc Mega Pro motorcycle. The addition of dual HCS catalyst spiral pipes and Pertamax volumes adds to engine performance time. At a length of 500 mm and 2000 ml, the Pertamax volume for the engine speed of 3500 rpm is only able to save fuel by 52.52%. The most optimal HCS double catalyst spiral pipe design is a 500 cm long pipe with a volume of Pertamax 2000 ml. In addition to engine performance time on the catalyst spiral pipe design can increase engine torque and power by 92.3% at 3500 rpm and reduce the temperature by 12.34% at 6000 rpm, and 1.93% noise at 4000 rpm. Increasing the double HSC catalyst spiral pipe and Pertamax volume can increase the hydrocarbon content of fuel entering the combustion chamber supplied from Pertamax vapor. Premium fuel (C8H18) plus Pertamax vapors. This makes the fuel content has a high octane value, greater engine power, and low fuel consumption. A high octane value affects perfect engine combustion, reduced knocking, low engine temperature, and decreased noise.Kendaraan bermotor dengan bahan bakar yang irit, lincah, cepat, dan praktis merupakan salah satu faktor utama konsumen menentukan pilihan membeli sepeda motor. Masyarakat yang memiliki sepeda motor di bawah tahun 2000 belum dilengkapi dengan alat penghemat bahan bakar, sehingga boros bahan bakar dan harus pintar menghemat bahan bakar. Banyak produsen sepeda motor yang mengeluarkan produk terbarunya paling irit bahan bakar, tetapi mempengaruhi performa mesinnya. Harga bahan bakar jenis premium Rp. 6.500,00 per liter, pertalite Rp. 7.600,00 per liter, pertamax Rp. 8.900,00 per liter, dan pertamax turbo Rp. 10.100,00 per liter. Harga bahan bakar yang tinggi mendorong peneliti melakukan berbagai inovasi penghemat bahan bakar.Tujuan penelitian ini mengembangkan desain pipa katalis HCS model spiral ganda yang disusun seri sehingga mampu menghemat bahan bakar diatas 67% pada sepeda motor 4 tak tanpa mempengaruhi performa mesin. Metode penelitian menggunakan variabel bebas dengan putaran mesin, panjang pipa, diameter pipa, dan volume pertamax. Variabel terikat dengan menguji torsi dan daya mesin, waktu konsumsi bahan bakar, temperatur, dan kebisingan sepeda motor Mega Pro 156,7cc. Penambahan pipa spiral katalis HCS ganda dan volume pertamax menambah waktu performa mesin. Pada panjang 500 mm dan 2000 ml volume pertamax untuk kecepatan putaran mesin 3500  rpm hanya mampu menghemat bahan bakar sebesar  52,52%. Desain pipa spiral katalis HCS ganda  yang paling optimal dari yaitu pipa dengan panjang 500 cm dan volume pertamax 2000 ml. Selain waktu performa mesin pada desain pipa spiral katalis ini dapat meningkatkan torsi dan daya mesin sebesar 92,3% pada putaran 3500 rpm serta mengurangi temperatur 12,34% pada putaran 6000 rpm, dan kebisingan 1,93% pada putaran 4000 rpm. Bertambahnya pipa spiral katalis HSC ganda dan volume pertamax dapat meningkatnya kandungan hidrokarbon bahan bakar yang masuk ke ruang pembakaran disuplay dari uap pertamax. Bahan bakar premium (C8H18) di tambah uap pertamax.menjadikan kandungan bahan bakar memiliki nilai oktan tinggi, daya mesin yang lebih besar dan komsumsi bahan bakar rendah. Nilai oktan tinggi mempengaruhi pembakaran mesin sempurna, knocking berkurang, temperatur mesin rendah, dan kebisingan menurun

Performance Investigation of an Eight Cylinder Gasoline Engine

2014 ◽  
Author(s):  
Ali Kilicarslan ◽  
Mohamad S. Qatu
Keyword(s):  
Experimental Work ◽  
Engine Speed ◽  
Gasoline Engine ◽  
Mechanical Efficiency ◽  
Effective Pressure ◽  
Air Mass ◽  
Engine Torque ◽  
Gasoline Engines ◽  
Temperature And Pressure ◽  
Engine Power

Performance investigation of a Chevrolet 5.7, eight cylinder gasoline engine is experimentally carried out at laboratuary conditions by means of the special softwares called “NetDyn” and “WinDyn”. This experimental work is intended to make contribution to the researchers that experimentally analyze the parameters of gasoline engines with the engine speed in detail. During the experiments, the engine speed is changed from 2500 rpm to 5250 rpm with 250 rpm intervals and steptime for succesive speeds is kept constant as 10 s. Engine power, engine torque, fuel and air flowrates per kW, mechanical efficiency, oil temperature and pressure, break mean effective pressure and exhaust temperatures are measured as a function of engine speed. As the engine speed was increased, it was observed that the air mass flow rate, exhaust and oil temperatures increased while the break mean effective pressure, mechanical volumetric efficiency, and engine torque decreased. Engine power increased between the engine speeds of 2500 rpm and 3750, but it decreased between the speeds of 3750 rpm 5246 rpm.

An experimental study on fuel energy saving in gasoline engines using GNP as a lubricant additive

2021 ◽  
pp. 146808742110396
Author(s):  
Gurtej Singh ◽  
Mohammad Farooq Wani ◽  
Mohammad Marouf Wani
Keyword(s):  
Piston Ring ◽  
Energy Savings ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Mechanical Efficiency ◽  
Lubricant Additive ◽  
Lubricating Oil ◽  
Engine Torque ◽  
Gasoline Engines ◽  
Improved Performance

This study concentrates on enhancing the performance of the gasoline engine through nano-lubrication. The effect of Graphene nano-platelets (GNP) as lubricant additives in SAE 15W40 oil on the fuel energy consumption and piston ring wear is investigated. GNP-filled lubricating oil boosted the brake strength, engine torque, and mechanical efficiency, whereas the gasoline engine’s brake specific fuel consumption (BSFC) decreased by 5.3%–6.5% due to a 1.7%–3.46% improvement in engine mechanical efficiency. Further, emission results showed that the GNP-filled lubricating oil reduced the emissions of the engine by approximately 3%–6% as compared to the virgin lubricating oil. Furthermore, the piston ring wear was found to reduce by using GNP-filled nano-lubricant. The characterization of the worn piston ring surfaces showed that the tribo-film formed on wear tracks resulted in the improved performance of the engine thereby reducing abrasive wear and surface roughness. From these studies, an attempt has been made to co-relate engine performance characteristics with tribological perception to contribute in the direction of energy savings and fuel economy.

scholarly journals PENGARUH PENAMBAHAN BEARING CAMSHAFT TERHADAP PERFORMA MESIN PADA MOTOR BENSIN 4 LANGKAH 150 CC

2020 ◽  
Vol 3 (2) ◽  
pp. 74
Author(s):  
Muhammad Arsad Al Banjari
Keyword(s):  
Engine Speed ◽  
Roller Bearing ◽  
Engine Performance ◽  
Valve Opening ◽  
Left And Right ◽  
Speed Engine ◽  
Engine Power

Abstract: This study aims to determine the effect of modification camshaft with addition needle roller bearing on the left and right side. After that compare the engine performance with the standard camshaft on the motorbike Suzuki Satria F150. The method used is an experiment. The test is carried out on the dyno test by paying attention to the value of engine speed, engine power, and the highest torque produced without limiting the gas valve opening. The results showed that after modification with the addition of a needle roller bearing the highest engine power was 18.70 HP and 12.23 N.m of torque at an engine speed of 10,888 RPM. With the addition of a needle roller bearing to the camshaft, the engine power was increased by 2.08 HP and the torque value was increased to 2 N.m Keywords: camshaft, needle roller bearing, engine performance

scholarly journals Operating of Gasoline Engine Using Naphtha and Octane Boosters from Waste as Fuel Additives

2021 ◽  
Vol 13 (23) ◽  
pp. 13019
Author(s):  
Obed Majeed Ali ◽  
Omar Rafae Alomar ◽  
Omar Mohammed Ali ◽  
Naseer T. Alwan ◽  
Salam J. Yaqoob ◽  
...  
Keyword(s):  
Engine Speed ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Exhaust Emissions ◽  
Fuel Quality ◽  
Fuel Additives ◽  
Important Indicator ◽  
Brake Thermal Efficiency ◽  
Fusel Oil ◽  
Study Results

Fuel quality is an important indicator for the suitability of alternative fuel for the utilization in internal combustion (IC) engines. In this paper, light naphtha and fusel oil have been introduced as fuel additives for local low octane gasoline to operate a spark ignition (SI) engine. Investigated fuel samples have been prepared based on volume and denoted as GN10 (90% local gasoline and 10% naphtha), GF10 (90% local gasoline and 10% fusel oil), and GN5F5 (90% local gasoline, 5% naphtha and 5% fusel oil) in addition to G100 (Pure local gasoline). Engine tests have been conducted to evaluate engine performance and exhaust emissions at increasing speed and constant wide throttle opening (WTO). The study results reveal varying engine performance obtained with GN10 and GF10 with increasing engine speed compared to local gasoline fuel (G). Moreover, GN5F5 shows higher brake power, lower brake specific fuel consumption, and higher brake thermal efficiency compared to other investigated fuel samples over the whole engine speed. The higher CO and CO2 emissions were obtained with GN10 and GF10, respectively, over the entire engine speed and the minimum CO emissions observed with GN5F5. Moreover, the higher NOx emission was observed with pure local gasoline while the lowest was observed with GF10. On the other hand, GN5F5 shows slightly higher NOx emissions than GF10, which is lower than GN10 and gasoline. Accordingly, GN5F5 shows better engine performance and exhaust emissions, which can enhance the local low gasoline fuel quality using the locally available fuel additives.

scholarly journals Prototype of Disc Brake Dynamometer

2020 ◽  
Author(s):  
Pakkip Kraisoda
Keyword(s):  
Thermal Efficiency ◽  
Performance Test ◽  
Gasoline Engine ◽  
Engine Performance ◽  
Performance Standard ◽  
Engine Torque ◽  
Single Cylinder ◽  
Disk Brake ◽  
Single Cylinder Engine ◽  
Brake Dynamometer

Abstract This paper presents the design and test of prototype of Disk Brake Dynamometer of Single-cylinder engine performance standard Brake horsepower with water using the Honda GX-200 four-stroke 196 cm3 gasoline engine, 1-cylinder gasohol 95 fuel. The experiment result showed that the Prototype of Disk brake Dynamometer maximum engine torque was 11.58 N m at 2500 rpm. The maximum power of engine was 3.29 kW at 3000 rpm and maximum thermal efficiency of engine brake was 25.36% at 2500 rpm. When being compared the performance of a standard single-cylinder engine performance test with the all-purpose gasoline engine Honda GX-200 1-stroke 4-stroke 196 cm3 gasohol 95, it was found that Maximum engine torque was less than 5.39%, the maximum engine power was higher than 2.49%, the maximum fuel consumption of the engine was higher than 10% and the maximum thermal efficiency of the engine was higher than 2.39%.

Experimental Study of Engine Performance and Fuel Consumption Using Various Blends: Ethanol, Naphthalene and Palm Oil

2016 ◽  
Vol 701 ◽  
pp. 205-210
Author(s):  
Mohammad Irfan Hazmi Ismail ◽  
Rusli Othman ◽  
Loke Kean Koay
Keyword(s):  
Experimental Study ◽  
Fuel Consumption ◽  
Palm Oil ◽  
Engine Speed ◽  
Engine Performance ◽  
Spark Ignition Engine ◽  
Renewable Energy Resources ◽  
Engine Torque ◽  
Fuel Blends ◽  
High Engine Speed

The depletion of fossil fuel resource is creating demand for new renewable energy resources. An experimental study was conducted in order to determine effects of various fuel blends including small amount of ethanol, naphthalene and palm oil in petrol on a single cylinder spark ignition engine. Engine performance and fuel consumption were investigated using an engine dynamometer with various loads and engine speed. Engine performance was obtained by recording the engine torque during low, medium and high engine speed from 1200 rpm - 4700 rpm. Fuel consumption of the blends was determined by the brake specific fuel consumption. Palm oil showed about 50% reduction in engine torque for the blends of 3 % and 5 %, while naphthalene showed about 11% reduction for the engine torque when the engine speed is more than 4000 rpm. Ethanol showed a slight improvement of about 1% in engine torque. 20% of ethanol blending fuel gave out the best result in terms of torque. Besides, 20% of ethanol blend found to be decreased in fuel consumption for about 9% when running at 2500 rpm in comparison with 100% petrol.

scholarly journals Advancements in mechanical engineering spell hopeful development of autonomous biobots

2019 ◽  
Author(s):  
Aris Triwiyatno ◽  
Sumardi Sumardi
Keyword(s):  
Fuzzy Logic ◽  
Fuel Consumption ◽  
Gasoline Engine ◽  
Control Process ◽  
Engine Performance ◽  
Complex Problem ◽  
Torque Control ◽  
Reduce Fuel Consumption ◽  
Inference System ◽  
Engine Torque

In the case of injection gasoline engine, or better known as spark ignition engines, an effort to improve engine performance as well as to reduce fuel consumption is a fairly complex problem. Generally, engine performance improvement efforts will lead to increase in fuel consumption. However, this problem can be solved by implementing engine torque control based on intelligent regulation such as the fuzzy logic inference system. In this study, fuzzy logic engine torque regulation is used to control the throttle position entered by the driver to achieve optimal engine torque. An engine torque vs. throttle position and engine speed mapping for vehicles with economical function is used to build this control process regulation. From the simulation result, it can be concluded that this control strategy is very effective to reduce fuel consumption and simultaneously to optimize the engine performance.

Sign in / Sign up

Export Citation Format

Share Document