scholarly journals Sealing Efficiency of MTA, Accelerated MTA, Biodentine and RMGIC as Retrograde Filling Materials

2021 ◽  
Vol 25 (3) ◽  
pp. 159-165
Author(s):  
Merve Mutluay ◽  
Abidin Talha Mutluay
Keyword(s):  
Paired Comparison ◽  
In Vitro Study ◽  
Blue Dye ◽  
Dye Penetration ◽  
Filling Materials ◽  
Nail Polish ◽  
Retrograde Filling ◽  
Significant Difference ◽  
Group 3

Summary Background/Aim: This in-vitro study evaluated the apical-sealing ability of MTA, MTA+10% CaCl2, Biodentine™ and RMGIC when used as retrograde material. Material and Methods: A total of 80 single-rooted bovine incisors were decoronated, instrumented, and divided into 4 groups according to retrograde material, as follows: Group 1: MTA (ProRoot MTA, Dentsply); Group 2: MTA (ProRoot MTA, Dentsply) + 10% CaCl2; Group 3: Biodentine (Biodentine®, Septodont); Group 4: RMGIC (Nova Glass -LC, Imicryl). Root surfaces were isolated with nail polish, and teeth were immersed in 2% methylene blue dye at 37°C for 48 h. The extent of dye penetration (mm) was measured under a stereomicroscope. Results: RMGIC had the highest mean-rank dye penetration score (MP=49.05), followed by MTA (MP=43.65), Biodentine (35.95) and MTA+CaCl2 (MP=33.35). The results of paired comparison tests found the mean microleakage value of MTA+10% CaCl2 and Biodentine (Group 3) to be significantly lower than that of RMGIC (respectively; p=0,020, p=0,019). No significant difference was found in the other group comparisons (p> 0.05). Conclusions: These results suggest that the addition of an accelerator to MTA may reduce microleakage following endodontic surgery. Biodentine can be used as an alternative to MTA on retrograde obturation.

scholarly journals THE EFFECT OF THERMOCYCLING ON MARGINAL SEALING ABILITY OF MTA PLUS AND BIODENTINE WHEN USED AS ROOT-END FILLING MATERIALS

2020 ◽  
Vol 8 (11) ◽  
pp. 894-900
Author(s):  
Deebah Choudhary ◽  
Keyword(s):  
Statistical Analysis ◽  
In Vitro Study ◽  
Blue Dye ◽  
Depth Of Penetration ◽  
Jammu And Kashmir ◽  
Filling Materials ◽  
Sealing Ability ◽  
Group I ◽  
Significant Difference

Background:Marginal microleakage occurs when restorations are poorly adapted to the cavity walls which leads to penetration of bacteria, fluid and nutrient into the marginal gap. Aim: The study aimed to evaluate the effect of thermocycling on marginal sealing ability of two root-end filling materials i.e. MTA Plus and Biodentine. Materials and Methods: An in vitro study was conducted at Department of Conservative Dentistry and Endodontics in Institute of Dental Sciences (IDS), Jammu, Jammu and Kashmir, India. Forty extracted teeth with single root were decoronated maintaining a standardized length of 16mm. Biomechanical preparation and obturation was done for all the teeth. Samples were stored at 37oC and 100% humidity for seven days. Apical 3mm was resected and cavities were prepared which were randomly divided into two experimental groups with twenty samples each. The cavities were filled with MTA Plus in group I and Biodentine in group II. These groups were further divided into two subgroups of ten each (n=10). The second subgroup of both the groups did not receive any treatment and the first subgroup samples were subjected to 500 thermocycles in water bath at temperature ranges between 5oC and 55oC with a dwell time of 30 second. The samples were immersed in methylene blue dye and after through washing they were sectioned longitudinally. Examination was done under stereomicroscope to measure the depth of penetration. Statistical Analysis: The data collected were put to statistical analysis by one-way ANOVA (analysis of variance) and post hoc tests. Results: The average depth of dye penetration was least for Biodentine when thermocycling treatment was not given (0.13mm) and maximum value was depicted by MTA Plus when undergone thermal cycles (0.57mm). It is also noted that no significant difference is seen in Biodentine with or without artificial aging procedure. Conclusion:Biodentine showed least amount of microleakage, thus a better sealing ability.Alsothere was little effect of thermocycling onmicroleakage of both the materials.

scholarly journals Comparison of Root End Sealing Ability of Three Retrograde Filling Materials in Teeth with Root Apices Resected at 90° using Dye Penetration Method under Fluorescent Microscope: An In-vitro Study

2021 ◽  
pp. 319-325
Author(s):  
Payal Chaudhari ◽  
Manoj Chandak ◽  
Arvind Ramdas ◽  
Patil Bhagat
Keyword(s):  
Bone Cement ◽  
In Vitro Study ◽  
Filling Material ◽  
Dye Penetration ◽  
Fluorescent Microscope ◽  
Filling Materials ◽  
Anterior Teeth ◽  
Sealing Ability ◽  
Retrograde Filling

Background: Inadequate seal at the apex is the substantial cause for surgical endodontic dissatisfaction. The retrograde filling material which is used should prevent the egress of potential contaminants into periradicular tissue. Objectives: To evaluate the ability of MTA Angelus, Zirconomer and Bioactive bone cement to seal the root end as retrograde filling material; and to compare root end sealing ability of these three different retrograde filling materials with apices resected at 900 angles using dye penetration method under fluorescent microscope. Methodology: Thirty six extracted upper anterior teeth are to be cut horizontally at the CEJ. After following the standard protocols of, “cleaning, shaping and obturation” with gutta percha and “AH Plus sealer”, the samples will be resected 3mm at the apical end at 90 degree angle along the long axis of the tooth with the help of diamond disc. A root end cavity of depth 3mm will be made with Diamond coated ultrasonic surgical tip S12 90 ND. The teeth will be randomly categorized in 3 groups: Group 1: MTA angelus; Group 2: Zirconomer; Group 3: Bioactive Bone Cement. Following which the roots to be coated with nail varnish except the tip. Each material will be compressed in the root end cavity with the help of small pluggers. All the samples which are retrofilled will be kept in acrydine orange for a duration of 24 hours, following which cleaning & bucco-lingual sectioning(vertical) will be done. Fluorescent microscope will be used for observation of sectioned root samples. Expected Results: Bioactive bone cement is expected to have better sealing ability of the retrograde cavity preparation with minimal or no microleakage followed by MTA Angelus and then Zirconomer. Conclusion: If this study proves correct, this would be helpful for the clinicians to choose better and the most efficient retrograde filling material with best sealing ability and minimal microleakage in a retrograde preparation which will aid in success of the root canal treatment further resolving the infection.

scholarly journals Evaluation of Apical Sealing Ability of Four Different Sealers using Centrifuging Dye Penetration Method: An in vitro Study

2012 ◽  
Vol 13 (6) ◽  
pp. 830-833
Author(s):  
Romel Joseph
Keyword(s):  
In Vitro Study ◽  
Blue Dye ◽  
Control Groups ◽  
Root Canals ◽  
Dye Penetration ◽  
Gutta Percha ◽  
Sealing Ability ◽  
Ah Plus ◽  
And Control

ABSTRACT Aim The aim of this in vitro study was to evaluate the apical seal obtained with four root canal sealers AH 26, Sealapex, Endoflas FS and AH Plus, with lateral condensation. Materials and methods Sixty root canals were prepared using the step-back technique. The specimens were divided into four experimental groups of 12 teeth and two control groups of 12 teeth. The experimental groups were obturated by laterally condensed gutta-percha with one of the tested sealers and control groups were obturated without any sealer. Methylene blue dye penetration with centrifuging method was used to evaluate the apical sealing ability. The quantitative apical leakage of each specimen was measured after 2 weeks. Results The results showed no significant differences between all groups except between AH Plus and Endoflas FS (<0.05). AH Plus showed significantly less leakage than Endoflas FS. Conclusion AH Plus showed the least leakage compared to AH 26, Sealapex and Endoflas FS. How to cite this article Joseph R, Singh S. Evaluation of Apical Sealing Ability of Four Different Sealers using Centrifuging Dye Penetration Method: An in vitro Study. J Contemp Dent Pract 2012;13(6):830-833.

scholarly journals Evaluation of the apical microleakage of MTA Fillapex, AH26, and Endofill sealers

2020 ◽  
Vol 23 (3) ◽  
Author(s):  
Saeedeh Galledar ◽  
Robab Farhang ◽  
Malek Abazari ◽  
Parisa Negahdar
Keyword(s):  
Root Canal ◽  
Test Group ◽  
In Vitro Study ◽  
Negative Control ◽  
Vitro Study ◽  
Control Group ◽  
Dye Penetration ◽  
Gutta Percha ◽  
Significant Difference

Objective: Proper apical seal plays an important role in the success of root canal treatment. The most common cause of failure of root canal therapy is known as the lack of adequate apical seal. The aim of this in vitro study was to compare the apical microleakage of MTA Fillapex, , and Endofill sealers using dye penetration method. Material and Methods: In this in vitro study, 72 single-rooted extracted human teeth were selected. The teeth were randomly divided into three experimental groups of 20 and two positive and negative control groups of 6. The canals were prepared by step-back technique and then filled with gutta-percha and one of the sealers mentioned. In the positive control group, the canals were filled with gutta-percha without sealer, and in the negative control group, the canals were prepared but not filled. The teeth were immersed in 2% methylene blue dye for 72 hours. The teeth were then cut longitudinally and the level of dye penetration was measured under a stereomicroscope. Data were analyzed by SPSS ver. 19 software, ANOVA and Bonferroni post-hoc tests. Results: The mean level of dye penetration in the Endofill test group was significantly higher than that in the  and MTA Fillapex test groups. While, the observed difference between  and MTA Fillapex groups was not statistically significant (p<0.05). Conclusion: The results of this study showed that  and MTA Fillapex sealers did not show any significant difference in apical seal properties. However, their sealing strength was significantly greater than Endofill sealer.KeywordsAH26 sealer; Endofill; MTA Fillapex; Microleakag

scholarly journals Spectrophotometric Analysis Evaluating Apical Microleakage in Retrograde Filling using GIC, MTA and Biodentine: An in-vitro study

2020 ◽  
Author(s):  
Manisha Nepal ◽  
Snigdha Shubham ◽  
Rupam Tripathi ◽  
Jwolan Khadka ◽  
Deepa Kunwar ◽  
...  
Keyword(s):  
Negative Control Group ◽  
Positive Control ◽  
Negative Control ◽  
Control Group ◽  
Filling Materials ◽  
Diamond Bur ◽  
Retrograde Filling ◽  
Significant Difference ◽  
Supernatant Solution

Abstract Background The present study compares the apical microleakage of three different root-end filling materials in which the retrograde cavity is prepared by two different burs. Methods Eighty extracted single rooted maxillary and mandibular premolars were taken. Root canal treatment was completed. Apical 3 mm of all the teeth were resected with diamond disk. The tooth were divided into four groups with two subgroups for each group containing 10 tooth (N= 10) as: Group IA (Negative Control and IB (Positive Control); Group IIA and IIB: Prepared with round carbide bur and round diamond bur respectively, filled with GIC; Group IIIA and IIIB: Prepared with round carbide bur and round diamond bur respectively, filled with MTA; Group IVA and IVB: Prepared with round carbide bur and round diamond bur, filled with Biodentine. After applying two coats of nail varnish leaving apical 3 mm (except for negative control group) all teeth were immersed in 2% methylene blue for 3 days and again in 65% nitric acid for next 3 days for extraction of dye. The obtained solution was then transferred to eppendorf tube and centrifuged in microcentrifuges at 14,000 revolution per minutes (RPM) for 5 minutes. Optical density or absorbance of the supernatant solution was measured with UV spectrophotometer at 550 nm. Results The absorbance of the supernatant solution after dye extraction is decreasing in the order of positive control> GIC> MTA> Biodentine> negative control group. The significant difference was observed between GIC and MTA (p=0.0001) and GIC and Biodentine (p=0.0001) with two different burs but statistically non-significant difference was observed between MTA and Biodentine with Carbide bur (p=0.127) and Diamond bur (p=0.496) respectively. Conclusions Within the limitations of the present study, it can be concluded that Biodentine and MTA showed less microleakage as compared to GIC. There is no significant difference between mean microleakage of MTA and Biodentine. However, the mean OD of the Biodentine was least of all evaluated materials. Preparation of the root-end using round carbide bur as well as round diamond burs showed comparable microleakage for all three filling materials.

scholarly journals Investigation of surface topography of different root-end filling materials: An in vitro study

2019 ◽  
Vol 7 (1) ◽  
Author(s):  
Mine Koruyucu ◽  
Hazal Özcan ◽  
Merve Bayram ◽  
Abdullah Burak Cankaya ◽  
Nurullah Keklikoglu ◽  
...  
Keyword(s):  
Surface Topography ◽  
Normal Saline ◽  
Phosphate Buffer ◽  
Saline Solution ◽  
In Vitro Study ◽  
Phosphate Buffer Saline ◽  
Filling Materials ◽  
Retrograde Filling ◽  
Group B

Aim: Although there are many materials that can be used for retrograde filling in surgical endodontics, none of them can be regarded as an ideal material yet. The purpose of this study was to compare the surface topography of three different root-end filling materials.Methods: 36 extracted single rooted human incisor teeth were cleaned and decoronated to standardized 10 mm root lengths. The root segments were prepared and 2 mm apical resection were performed. The samples were randomly separeted to three groups (Group A: Ca(OH)2, Group B: MTA Angelus, Group C: ProRoot MTA), each comprised of 12 roots. Materials were placed as 2 mm apical barriers and obturated with guttapercha and AH-Plus sealer. Each group dimidiated two subgroups (A1,A2,B1,B2,C1,C2). Groups A1,B1,C1 were stored in normal saline (NS), groups A2,B2,C2 were stored in neutral phosphate buffer saline (NPBS) solution and samples were incubated at 370C for 2 weeks. Stereomicroscope (32X) was used to photograph the root-end filling.Results: All specimens demonstrated white crystals formation and sediment over the root-end filling materials and on the superficial border of the root-end cavities’ wall as a white plague. A2,B2,C2 samples have more crystal sediment on root-end fillings than samples A1,B1,C1. Dissolution and corrosion were observed in groups A1, A2.Conclusions: The results of this study revealed that calcium hydroxide is more resorbable than MTA Angelus and ProRoot MTA. The crystals formation and precipitation were observed in neutral phosphate buffer saline solution was more than normal saline solution for all groups as a hydroxiapatite crystals.  

FISSURE SEALANT INTERFACE MICROLEAKAGE USING ONE STEP ADHESIVES

2014 ◽  
Vol 1 (1) ◽  
pp. 49
Author(s):  
Sandy Christiono
Keyword(s):  
Blue Dye ◽  
Fissure Sealant ◽  
Whitney Test ◽  
Dye Penetration ◽  
Mann Whitney Test ◽  
Group I ◽  
Significant Difference ◽  
One Step ◽  
Group Ii

Background:This study evaluated the efficacy of a one step adhesives in reducing microleakage after water storage and thermocycling. Method: eighteen freshly extracted caries-free human premolars were used. The teeth were randomly divided into two groups; Group I: control etch adhesive (GC),Group II: G Bond One step adhesive (GC) The teeth were restored using helioseal Vivadent. Group II Each layer was cured using the Spectrum 800 curing light (Dentsply/Caulk) for 20 seconds at 600mW/cm2. The teeth were stored in artifisial saliva for 7 days in incubator. Samples were thermocycled 250x between 5°C and 55°C with a dwell of 30 seconds, then placed in a 0.5% methylene blue dye solution for 24 hours at 37°C. Samples were sectioned longitudinally and evaluated for microleakage at the occlusal and gingival margins under a microscope at 40x magnification. Dye penetration was scored: 0: no microleakage visible, score 1: microleakage up to half of the fissure, score 2: microleakage more than half of the fissure. Result: Mann-Whitney test was used to demonstrate significantly more dye penetration in Group I and Group II. When comparing the scores for two group, the Mann Whitney test showed no significant difference in dye penetration for etch and One step adhesive (p>0.05). Conclusion: Based on the results of this study, it can be concluded that etch and one step adhesive in the fissure sealant no significant difference to reduce of microleakage in study in vitro.

scholarly journals Effects of Different Disinfection Methods on Microleakage of Giomer Restorations

2019 ◽  
Vol 13 (04) ◽  
pp. 569-573 ◽  
Author(s):  
Abidin Talha Mutluay ◽  
Merve Mutluay
Keyword(s):  
In Vitro Study ◽  
Study Groups ◽  
Class V ◽  
Disinfection Methods ◽  
Group 4 ◽  
Significant Difference ◽  
Group 3 ◽  
Group 2 ◽  
Method Group

Abstract Objectives The purpose of this in vitro study was to investigate the effects of different disinfection methods on microleakage of Class V Giomer restorations. Materials and Methods Class V cavity preparation was performed on 40 sound permanent central incisors. Class V cavities (3 x 2 x 2 mm) were prepared on the buccal surfaces of the selected teeth. The teeth were randomly divided into four groups, each to be disinfected with a different method: Group 1—Disinfection with 2% chlorhexidine, Group 2—Disinfection with 6% sodium hypochlorite, Group 3—Disinfection with erbium, chromium: yttrium-scandium-gallium-garnet laser, Group 4—Control (distilled water). BeautiBond adhesive and Beautifil II Giomer restoration materials were applied to all surfaces of the cavities after the disinfection of all groups. The teeth were thermocycled 5,000 times (5–55°C), and then were immersed in 0.5% methylene blue for 24 hours. After rinsing, the teeth were longitudinally sectioned and dye penetration was assessed under a stereomicroscope (40x) to evaluate microleakage. Statistical Analysis The results were statistically evaluated by using the Kruskal–Wallis and Mann–Whitney U tests. Results Statistically, no significant difference was found between all four groups (p > 0.05). There was no statistically significant difference in microleakage scores of study groups (p > 0.05). Also, the microleakage scores of the gingival margins were significantly higher than the incisal margins (p < 0.0001). Conclusions Application of the different cavity disinfectants has no effect on the microleakage of Class V Giomer restorations.

scholarly journals Coronal Sealing Capacity of Temporary Restorative Materials in Pediatric Dentistry: A Comparative Study

2017 ◽  
Vol 10 (2) ◽  
pp. 115-118
Author(s):  
Shabnam Milani ◽  
Bahman Seraj ◽  
Alireza Heidari ◽  
Atousa Mirdamadi ◽  
Mahdi Shahrabi
Keyword(s):  
Comparative Study ◽  
Time Lapse ◽  
Pediatric Dentistry ◽  
Blue Dye ◽  
Time Intervals ◽  
Dye Penetration ◽  
Sealing Capacity ◽  
Significant Difference ◽  
Restorative Materials

ABSTRACT Aims The aim of this in vitro study is to compare the coronal microleakage of three common temporary restorative materials, namely Coltosol, Compoglass, and Zonalin, used in pediatric dentistry after endodontic treatment at different time intervals (1 week, 1, and 2 months) using dye penetration. Materials and methods Access cavities were prepared in 72 intact extracted premolar teeth. The samples were divided into three groups (n = 24) and filled with Coltosol, Compoglass, or Zonalin. After thermal cycling for 500 cycles (5–55°C), the teeth were immersed in 1% methylene blue dye at 37°C for 1 week (n = 8), 1 month (n = 8), and 2 months (n = 8). The samples were sectioned buccolingually, and the linear depth of dye penetration was measured using a stereomicroscope at 16 × magnification. The data were analyzed using Kruskal–Wallis test. Results There were no significant differences in the microleakage values of Coltosol and Zonalin or Zonalin and Compoglass groups at 1 week (p > 0.05) or 1 month (p > 0.05) intervals, but a significant difference was noted between Coltosol and Compoglass groups (p < 0.01); Coltosol provided a more favorable coronal seal. No significant difference was found among the experimental groups at the 2-month interval (p > 0.05). Conclusion At 1 week or 1 month of use, Coltosol showed better coronal seal. At 2 months, there was no significant difference apparent between the groups. A longer time lapse was associated with an increased likelihood of microleakage. How to cite this article Milani S, Seraj B, Heidari A, Mirdamadi A, Shahrabi M. Coronal Sealing Capacity of Temporary Restorative Materials in Pediatric Dentistry: A Comparative Study. Int J Clin Pediatr Dent 2017;10(2):115-118.

Sign in / Sign up

Export Citation Format

Share Document