scholarly journals Energy Yield Generated by a Small Building Integrated Photovoltaic Installation

2020 ◽  
Vol 27 (3) ◽  
pp. 335-346
Author(s):  
Ewa Klugmann-Radziemska ◽  
Małgorzata Rudnicka
Keyword(s):  
Final Conclusion ◽  
Energy Yield ◽  
Pv System ◽  
Additional Energy ◽  
Site Specific ◽  
University Of Technology ◽  
Building Integrated Photovoltaic ◽  
Gis System ◽  
Small Building ◽  
Production Prices

AbstractIn the recent years photovoltaic (PV) industry has experienced a major growth, caused by the ever present annual decrease in module production prices and the expanding awareness of the general public in terms of renewable energy. There are numerous ways to implement PV modules as an additional energy source for a building, be it mounted on the rooftop, or building integrated (BIPV). An analysis of BIPV consisting of 8 modules with the power of 250 Wp each was carried out for the building of the Chemistry Faculty of Gdansk University of Technology (GUT). It included monthly irradiance and energy generation values and compared them to data obtained by the means of PV-GIS system, after inserting site specific coordinates. Additional research on the same type of a single module with the power of 270 Wp was conducted to provide more insight in this matter. A comprehensible analysis allows for defining a final conclusion for the decrease in energy yield for GUT BIPV installation. Data outputs are lower than expected based on PV-GIS values, as for the most time the facade mounted PV system experiences partial soft shading from the nearby park. Furthermore, it is not located directly facing south, but rather south-east which does not prompt ideal working conditions.

scholarly journals A software-based approach in designing a rooftop bifacial PV system for the North Hall of Residence, IUT

Clean Energy ◽  
2021 ◽  
Vol 5 (3) ◽  
pp. 403-422
Author(s):  
Abdullah Al Mehadi ◽  
Misbahul Alam Chowdhury ◽  
Mirza Muntasir Nishat ◽  
Fahim Faisal ◽  
Md Minhajul Islam
Keyword(s):  
Energy Demand ◽  
Energy Model ◽  
Load Shedding ◽  
Energy Yield ◽  
Pv System ◽  
The North ◽  
Deviation Analysis ◽  
University Of Technology ◽  
Prone Area ◽  
Software Platforms

Abstract Bifacial rooftop photovoltaic panels appear to be an excellent means of power generation in this era of urbanization, especially for land-limited countries like Bangladesh. This paper presents a software-based approach to design and simulate a bifacial solar-panel-based energy model on the rooftop of the North Hall of Residence of the Islamic University of Technology, Gazipur. This vertically mounted model investigates the feasibility and applicability of such an energy model in a university residence, situated in a load-shedding-prone area. Hence, three prominent software platforms, namely PVSOL, PVsyst and System Advisor Model (SAM), are brought into action and rigorous simulations are performed for three different orientations; promising outcomes are observed in terms of annual energy yield, bifacial gain (BG) and consumption coverage of the grid and PV model. The annual energy demand of the North Hall is ~444 733.5 kWh. The three orientations can generate annually 92 508.62, 94 643.48 and 86 758.94 kWh, respectively. Hence, it is evident that the proposed orientations can supply almost 19–21% of the site’s annual demand. Monthly BG analysis shows an overall increase in energy gain of 13%, 15.6% and 6% for Orientation-1, Orientation-2 and Orientation-3, respectively. A rigorous comparative analysis and deviation analysis among the software results has been accomplished to gain more insight into the feasibility of the proposed system. Thus, we have focused on a detailed software-based estimation of energy production for different orientations of the PV panels, considering several factors, which will provide prior knowledge and assessment before going for hardware implementation in the future.

scholarly journals Reconfigurable Distributed Power Electronics Technique for Solar PV Systems

Electronics ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1121
Author(s):  
Kamran Ali Khan Niazi ◽  
Yongheng Yang ◽  
Tamas Kerekes ◽  
Dezso Sera
Keyword(s):  
Energy Yield ◽  
Solar Pv ◽  
Charge Redistribution ◽  
Pv System ◽  
Partial Shading ◽  
Pv Systems ◽  
Simulation Based ◽  
In Series ◽  
A Cell ◽  
Power Balancing

A reconfiguration technique using a switched-capacitor (SC)-based voltage equalizer differential power processing (DPP) concept is proposed in this paper for photovoltaic (PV) systems at a cell/subpanel/panel-level. The proposed active diffusion charge redistribution (ADCR) architecture increases the energy yield during mismatch and adds a voltage boosting capability to the PV system under no mismatch by connected the available PV cells/panels in series. The technique performs a reconfiguration by measuring the PV cell/panel voltages and their irradiances. The power balancing is achieved by charge redistribution through SC under mismatch conditions, e.g., partial shading. Moreover, PV cells/panels remain in series under no mismatch. Overall, this paper analyzes, simulates, and evaluates the effectiveness of the proposed DPP architecture through a simulation-based model prepared in PSIM. Additionally, the effectiveness is also demonstrated by comparing it with existing conventional DPP and traditional bypass diode architecture.

Performance assessment of free standing and building integrated grid connected photovoltaic system for southern part of India

2020 ◽  
pp. 014362442097774
Author(s):  
VS Chandrika ◽  
M Mohamed Thalib ◽  
Alagar Karthick ◽  
Ravishankar Sathyamurthy ◽  
A Muthu Manokar ◽  
...  
Keyword(s):  
Geographical Location ◽  
Photovoltaic System ◽  
Building Structures ◽  
System Efficiency ◽  
Pv System ◽  
Free Standing ◽  
Pv Module ◽  
Building Integrated Photovoltaic ◽  
Community Buildings ◽  
Equatorial Climate

Photovoltaic (PV) system efficiency depends on the geographical location and the orientation of the building. Until installing the building structures, the integration of the PV module must be evaluated with ventilation and without ventilation effects. This work optimises the performance of the 250 kWp grid-connected photovoltaic (GPV) for community buildings in the southern part of India. This simulation is carried out to evaluate the system efficiency of the GPV system under various ventilation conditions, such as free-standing PV (FSPV), building integrated photovoltaic ventilated (BIPV_V) and Building Integrated Photovoltaic without ventilation (BIPV). The PVsyst simulation tool is used to simulate and optimise the performance of the system with FSPV, BIPV and BIPV_V for the region of Chennai (13.2789° N, 80.2623° E), Tamilnadu, India. An annual system energy production is 446 MWh, 409 MWh and 428 MWh of FSPV, BIPV and BIPV_V system respectively. while electrical efficiency for the FSPV, BIPV_V, BIPV system is 15.45%. 15.25% and 14.75% respectively. Practical application: Integrating the grid connected photovoltaic system on the building reduces the energy consumption in the building. The integration of the PV on the roof or semi integrated on the roof is need to be investigated before installing on the buildings. The need for installation of the BIPV with ventilation is explored. This study will assist architects and wider community to design buildings roofs with GPV system which are more aesthetic and account for noise protection and thermal insulation in the region of equatorial climate zones.

To amaze — the aspiration of all curators: The Voice in the Walls Theatre Project at Old Government House, Brisbane.

2018 ◽  
Vol 25 (2) ◽  
pp. 286-299
Author(s):  
Katie McConnel
Keyword(s):  
Visitor Experience ◽  
Site Specific ◽  
Historical Information ◽  
Historical Significance ◽  
University Of Technology ◽  
Early Colonial ◽  
House Museum ◽  
Heritage Buildings ◽  
Practical Reality ◽  
The Voice

AbstractOld Government House (OGH) is one of Queensland’s premier heritage buildings, and is located within the Gardens Point campus of Queensland University of Technology (QUT). This 156-year-old building, now a house museum, offers a tangible link to Queensland’s early colonial life. The museum strives to present the stories of all who lived and worked here. Children generally do not visit historic houses willingly, and to address this OGH collaborated with Imaginary Theatre to develop an innovative and fun way to interpret and present the historical significance of the House to a younger audience. The result was a one-hour site-specific theatre performance, The Voice in the Walls — part game, part audio tour, part theatre. The key objective of the project was to create a visitor experience that captured the attention of nine- to twelve-year-olds by encouraging them to imagine an unfamiliar world and time while also conveying historical information. This article discusses the background to the development of the project, and its evolution from inspiration to practical reality.

scholarly journals Performance analysis of photovoltaic plants installed in dairy cattle farms

2015 ◽  
Vol 46 (2) ◽  
pp. 62
Author(s):  
Remo Alessio Malagnino
Keyword(s):  
Energy Efficiency ◽  
Performance Analysis ◽  
Dairy Cattle ◽  
Geographical Information ◽  
Research Centre ◽  
Energy Yield ◽  
Pv System ◽  
Technical Parameters ◽  
Global Efficiency ◽  
The Impact

Electric production from renewable resources, such as solar photovoltaic (PV), is playing an increasingly essential role in the agricultural industry because of the progressive increase in the energy price from fossil fuels and the simultaneous decrease in the income deriving from farming activities. A central issue in the sustainable diffusion of PV technologies is represented by the actual energy efficiency of a PV system. For these reasons, a performance analysis has been carried out in order to assess the potentials offered by different PV plants within a defined geographical context with the aim of investigating the impact of each component has on the PV generator global efficiency and defining the main technical parameters that allow to maximise the annual specific electric energy yield of an architectonically integrated plant, installed in a dairy house, compared to a ground-mounted plant. The annual performances of three grid connected PV plants installed in the same dairy cattle farm have been analysed: two are architectonically integrated plants - <em>i.e.</em>, a rooftop unidirectional and a multi-field systems (both 99 kW<sub>p</sub>) - and the other is a ground-mounted plant (480 kW<sub>p</sub>). Furthermore, the electrical performances, estimated by the photovoltaic geographical information system (PVGIS), developed by the EU Joint Research Centre, and by an analytical estimation procedure (AEP), developed on the basis of a meteo-climatic database related to the records of the nearest weather station and integrated by the components’ technical specifications, have been compared with the actual yields. The best annual performance has been given by the ground-mounted PV system, with an actual increase of 26% and in the range of 6÷12% according to different estimations, compared to the integrated systems, which were globally less efficient (average total loss of 26÷27% compared to 24% of the ground-mounted system). The AEP and PVGIS software estimates showed a good level of reliability for mean deviations between the annual actual and estimated electrical power yields have been equal to 11.5% for each PV system given the actual irradiation’ s uncertainty during the examined year. The main technical parameters, crucial to maximise the energy yield from a ground-mounted PV system to an integrated one, have been identified in the Tilt and Azimuth angles. Indeed, once a variance of 3÷4% in the global efficiency has been confirmed when the type of PV system is changed, in the case of the unidirectional integrated PV plant, the high roof pitch and the almost South orientation guarantee a solar energy increase up to 18% higher than that obtainable on the horizontal plane and similar to the increase estimated for the ground-mounted generator (+20%). Hence, integrated PV systems, besides reaching the same levels of energy efficiency as those ground-mounted, are also more <em>sustainable</em> than the latter. This is true providing that there are both a suitable orientation and an accurate design, especially to prevent the PV panels’ warming during summer, on an already available surface that is, however, functional to the roof’s architecture.

scholarly journals Evaluation of Contribution of PV Array and Inverter Configurations to Rooftop PV System Energy Yield Using Machine Learning Techniques

Energies ◽  
2019 ◽  
Vol 12 (16) ◽  
pp. 3158 ◽  
Author(s):  
Ngoc Thien Le ◽  
Watit Benjapolakul
Keyword(s):  
Machine Learning ◽  
Investment Decision ◽  
High Volume ◽  
Machine Learning Techniques ◽  
Energy Yield ◽  
Pv System ◽  
Useful Knowledge ◽  
Pv Systems ◽  
Learning Techniques ◽  
The Difference

Rooftop photovoltaics (PV) systems are attracting residential customers due to their renewable energy contribution to houses and to green cities. However, customers also need a comprehensive understanding of system design configuration and the related energy return from the system in order to support their PV investment. In this study, the rooftop PV systems from many high-volume installed PV systems countries and regions were collected to evaluate the lifetime energy yield of these systems based on machine learning techniques. Then, we obtained an association between the lifetime energy yield and technical configuration details of PV such as rated solar panel power, number of panels, rated inverter power, and number of inverters. Our findings reveal that the variability of PV lifetime energy is partly explained by the difference in PV system configuration. Indeed, our machine learning model can explain approximately 31 % ( 95 % confidence interval: 29–38%) of the variant energy efficiency of the PV system, given the configuration and components of the PV system. Our study has contributed useful knowledge to support the planning and design of a rooftop PV system such as PV financial modeling and PV investment decision.

scholarly journals Investigation of Solar Photovoltaic-Thermal (PVT) and Solar Photovoltaic (PV) Performance: A Case Study in Ghana

Energies ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2701 ◽  
Author(s):  
Saeed Abdul-Ganiyu ◽  
David A Quansah ◽  
Emmanuel W Ramde ◽  
Razak Seidu ◽  
Muyiwa S. Adaramola
Keyword(s):  
Alternative Energy ◽  
Crystalline Silicon ◽  
Real Life ◽  
Electrical Energy ◽  
Energy Output ◽  
Total Output ◽  
Energy Yield ◽  
Solar Photovoltaic ◽  
Pv System ◽  
Yearly Average

The main objective of this paper is to experimentally assess the real-life outdoor performance of a photovoltaic-thermal (PVT) module against a conventional photovoltaic (PV) system in a hot humid tropical climate in Ghana. An experimental setup comprising a water-based mono-crystalline silicon PVT and an ordinary mono-crystalline silicon PV was installed on a rooftop at the Kwame Nkrumah University of Science and Technology in Kumasi and results evaluated for the entire year of 2019. It was observed that the annual total output energy of PV module was 194.79 kWh/m2 whereas that of the PVT for electrical and thermal outputs were 149.92 kWh/m2 and 1087.79 kWh/m2, respectively. The yearly average daily electrical energy yield for the PV and PVT were 3.21 kWh/kWp/day and 2.72 kWh/kWp/day, respectively. The annual performance ratios for the PV and PVT (based on electrical energy output only) were 79.2% and 51.6%, respectively, whilst their capacity factors were, respectively, 13.4% and 11.3%. Whereas the highest monthly mean efficiency recorded for the PV was 12.7%, the highest combined measured monthly mean electrical/thermal efficiency of the PVT was 56.1%. It is also concluded that the PVT is a worthy prospective alternative energy source in off-grid situations.

scholarly journals Numerical Modeling of Bifacial PV String Performance: Perimeter Effect and Influence of Uniaxial Solar Trackers

Energies ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 869 ◽  
Author(s):  
Fabio Ricco Galluzzo ◽  
Pier Enrico Zani ◽  
Marina Foti ◽  
Andrea Canino ◽  
Cosimo Gerardi ◽  
...  
Keyword(s):  
Experimental Data ◽  
System Performance ◽  
Geographical Location ◽  
Performance Model ◽  
Rear Side ◽  
Energy Yield ◽  
Pv System ◽  
Latitude Range ◽  
Accurate Performance ◽  
Solar Tracker

The bifacial photovoltaic (PV) systems have recently met large interest. The performance of such systems heavily depends on the installation conditions and, in particular, on the albedo radiation collected by the module rear side. Therefore, it is of crucial importance to have an accurate performance model. To date, in the scientific literature, numerous models have been proposed and experimental data collected to study and optimize bifacial PV system performance. Currently, 3D and 2D models of bifacial PV devices exist. Though the former are more mathematically complex, they can lead to more accurate results, since they generally allow to fully consider the main aspects influencing a bifacial PV system performance. Recently, we have proposed and validated through experimental data a 3D model tested as a function of module height, tilt angle, and ground albedo. In this work, through such a model, we studied the role played by the perimeter zones surrounding the PV string, by considering PV strings of 30 or 60 modules. We considered the cases of fixed installation with optimal PV module tilt and of installation with uniaxial horizontal solar tracker. We evaluated the PV energy yield as a function of the size of the perimeter zones for the two cases, i.e., both with and without the solar tracker. In optimal perimeter conditions, we then studied the behavior of bifacial and mono-facial PV strings by varying the geographical location in a large latitude range.

scholarly journals Design and Simulation of a PV System Operating in Grid-Connected and Stand-Alone Modes for Areas of Daily Grid Blackouts

2019 ◽  
Vol 2019 ◽  
pp. 1-9 ◽  
Author(s):  
Moien A. Omar ◽  
Marwan M. Mahmoud
Keyword(s):  
Solar Radiation ◽  
State Of Charge ◽  
Performance Ratio ◽  
Energy Yield ◽  
Real Problem ◽  
Storage Battery ◽  
Pv System ◽  
Daily Energy ◽  
Battery State Of Charge ◽  
Continuous Power

The electricity in Gaza, Palestine, is limited and scheduled for 4-10 hours per day due to political reasons. This status represents a real problem for different sectors. This paper presents an effective solution especially for the energy supply problem in the residential sector by using an unconventional PV system which operates in stand-alone and grid-connected modes. The system includes a storage battery block with a proper capacity to secure for continuous power supply of a residential house with a daily energy load of 10 kWh. It was found that an unconventional PV system of 3.2 kWp and a storage battery block of 19.2 kWh will be able to cover the total daily energy demands of the house including the outlined electricity cutoff hours. The design of this system and specifics of its components are presented in this paper. The system was simulated by Matlab software, where the daily load curve, grid cutoff hours, and the monthly solar radiation are considered. The obtained simulation results show that the produced PV energy exceeds the load demands during nine months of the year, and thereby, a high battery state of charge (SOC) in the range of 73-84% is achieved. During the three months of the lowest solar radiation (Dec.-Feb.), the produced PV energy is equal to the load demand while the battery state of charge varies in the range of 40-49% which verifies the appropriateness of the proposed PV system. The daily energy yield of the PV system varies between 2.6 and 5.4 kWh/kWp in January and July, respectively, which corresponds to a performance ratio of 90% and 66.25%, respectively.

Performance Enhancement of Partially Shaded Solar Photovoltaic Array Using Grouping Technique

2015 ◽  
Vol 137 (3) ◽  
Author(s):  
S. Malathy ◽  
R. Ramaprabha
Keyword(s):  
Control Algorithm ◽  
Performance Enhancement ◽  
Multilevel Inverter ◽  
Energy Yield ◽  
Solar Photovoltaic ◽  
Pv System ◽  
Effective Technique ◽  
Photovoltaic Array ◽  
Efficient Control

The energy yield of the photovoltaic (PV) system is reduced to a greater extent under shaded conditions. Reconfiguration and repositioning techniques demand more number of sensors, switches, and an efficient control algorithm and are well suited for rapidly changing shade conditions. However, for fixed shading that is common in urban rooftop installations, where the shading is partial and usually caused by nearby structures, a simple, yet effective technique is necessary. This paper addresses the issue by grouping the panels based on shade intensity and the merits of asymmetrical multilevel inverter (AMLI) are utilized as the working voltage of each group is different.

Sign in / Sign up

Export Citation Format

Share Document