scholarly journals Mineralogy, chemical composition and leachability of ash from biomass combustion and biomass–coal co-combustion

Mineralogia ◽  
2018 ◽  
Vol 49 (1-4) ◽  
pp. 67-97 ◽  
Author(s):  
Wanda Wilczyńska-Michalik ◽  
Renata Gasek ◽  
Marek Michalik ◽  
Janusz Dańko ◽  
Tadeusz Plaskota
Keyword(s):  
Chemical Composition ◽  
Energy Dispersive Spectrometry ◽  
Biomass Combustion ◽  
Poor Correlation ◽  
X Ray Diffraction ◽  
Biomass Ash ◽  
X Ray ◽  
One Step ◽  
Bulk Content ◽  
Potential Use

Abstract Ash samples from biomass combustion or co-combustion with coal were analysed. The aim of this study of ash was to determine its mineral and chemical composition, and the chemical composition of solutions obtained during one-step water extraction. Besides the chemical analysis, X-ray diffraction (XRD) and scanning electron microscopy coupled with energy dispersive spectrometry (SEM-EDS) were applied. The mineral and chemical composition of ash samples differ strongly. The content of heavy metals in the ash is generally low, but in some samples the limits of the content of some elements determined for fertilizers or soil amendments are exceeded. The relatively poor correlation between the concentration in leachate and bulk content in ash indicates that numerous elements are present in different forms in the studied samples. The results indicate that the potential use of biomass ash, or ash from biomass–coal co-combustion, requires complex studies that explore ash and leachates.

Occurrences of kaolin in Koutaba (west Cameroon): Mineralogical and physicochemical characterization for use in ceramic products

Clay Minerals ◽  
2015 ◽  
Vol 50 (5) ◽  
pp. 593-606 ◽  
Author(s):  
A. Nkalih Mefire ◽  
A. Njoya ◽  
R. Yongue Fouateu ◽  
J.R. Mache ◽  
N.A. Tapon ◽  
...  
Keyword(s):  
Particle Size ◽  
Chemical Composition ◽  
Thermogravimetric Analysis ◽  
Raw Materials ◽  
Physicochemical Characterization ◽  
X Ray Diffraction ◽  
X Ray ◽  
Ball Clays ◽  
Potential Use ◽  
Representative Samples

AbstractThirty clay samples collected from three hills in Koutaba (west Cameroon) were characterized in order to evaluate their potential use as raw materials for ceramics. After preliminary mineralogical identification by X-ray diffraction, three representative samples from the three different hills, referred to hereafter as K1M, K2M and K3M, were selected for further investigation by X-ray fluorescence, plasticity, granularity and thermogravimetric analysis. The main clay minerals are kaolinite (32–51%) and illite (up to 12%). Additional major phases are quartz (32–52%), goethite (6–7%) and feldspars (0–4%). The chemical composition showed variable amounts of SiO2(60–72%), Al2O3(15–20%) and Fe2O3(1–9%), in accordance with the quartz abundance in all of the samples studied. The particle-size distribution showed a large proportion of silty fraction (64–88%) with moderate sandy (9–19%) and clayey fractions ( < 5% for K2M, 12% for K1M and 20% for K3M). All of the clays showed moderate plasticity-index values (8–11%). Because of these characteristics, K1M and K3M may be suitable for use in common bricks and hollow ceramic products. Sieving or the addition of ball clays is recommended to increase the plasticity of sample K2M for use in common bricks.

Tb3Sc2Al3O12-TbScO3 eutectic self-organized microstructure for metamaterials and photonic crystals application

2006 ◽  
Vol 14 (3) ◽  
Author(s):  
K. Kołodziejak ◽  
S. Turczyński ◽  
R. Diduszko ◽  
L. Klimek ◽  
D. Pawlak
Keyword(s):  
Chemical Composition ◽  
Photonic Crystals ◽  
Lattice Constant ◽  
Energy Dispersive Spectrometry ◽  
Energy Dispersive ◽  
X Ray Diffraction ◽  
X Ray ◽  
Self Organized ◽  
Electron Backscattering Diffraction ◽  
The Relationship

AbstractEutectics are the materials with foreseen application in the field of photonic crystals and metamaterials. In this paper, the dependence on chemical composition of the microstructures of terbium-scandium-aluminium gamet and terbium-scandium perovskite (Tb3Sc2Al3O12-TbScO3) eutectics has been studied. The growth of the eutectic rods by the micro-pulling down method is presented, using compositions with several different volume fractions of the garnet and the perovskite phases, VTSAG:VTSP = 4, 3, 2, 1, 1/2. The phases have been characterized by powder X-ray diffraction and energy dispersive spectrometry. The relationship between the lattice constant of individual phases and the chemical composition is presented. The unidirectional growth of microrods has been also investigated by electron backscattering diffraction.

scholarly journals A Versatile Approach to Access Trimetallic Complexes Based on Trisphosphinite Ligands

Molecules ◽  
2020 ◽  
Vol 25 (3) ◽  
pp. 593
Author(s):  
Juan Miranda-Pizarro ◽  
Macarena G. Alférez ◽  
M. Dolores Fernández-Martínez ◽  
Eleuterio Álvarez ◽  
Celia Maya ◽  
...  
Keyword(s):  
Coordination Chemistry ◽  
Late Transition Metal ◽  
X Ray Diffraction ◽  
X Ray ◽  
Full Characterization ◽  
Metal Precursors ◽  
Straightforward Method ◽  
One Step ◽  
Late Transition

A straightforward method for the preparation of trisphosphinite ligands in one step, using only commercially available reagents (1,1,1-tris(4-hydroxyphenyl)ethane and chlorophosphines) is described. We have made use of this approach to prepare a small family of four trisphosphinite ligands of formula [CH3C{(C6H4OR2)3], where R stands for Ph (1a), Xyl (1b, Xyl = 2,6-Me2-C6H3), iPr (1c), and Cy (1d). These polyfunctional phosphinites allowed us to investigate their coordination chemistry towards a range of late transition metal precursors. As such, we report here the isolation and full characterization of a number of Au(I), Ag(I), Cu(I), Ir(III), Rh(III) and Ru(II) homotrimetallic complexes, including the structural characterization by X-ray diffraction studies of six of these compounds. We have observed that the flexibility of these trisphosphinites enables a variety of conformations for the different trimetallic species.

scholarly journals Analytical study of Buddha sculptures in Jingyin temple of Taiyuan, China

2021 ◽  
Vol 9 (1) ◽  
Author(s):  
Xiaojian Bai ◽  
Chen Jia ◽  
Zhigen Chen ◽  
Yuxuan Gong ◽  
Huwei Cheng ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Analytical Study ◽  
Energy Dispersive Spectrometry ◽  
Analytical Techniques ◽  
X Ray Diffraction ◽  
Ancient China ◽  
X Ray ◽  
Unique Style ◽  
Scanning Electron

AbstractWith exquisite design and unique style, the painted sculptures of Tutang Buddha and two attendants Buddha in Jingyin Temple are precious cultural heritages of China. The sculpture of Tutang Buddha, which was carved from a mound and painted by ancient craftsmen, was rarely found in ancient China. However, due to natural and human factors, the sculptures were severely damaged. Obviously, they require urgent and appropriate protection and restoration. In this study, samples taken from the sculptures were analysed through multiple analytical techniques, including scanning electron microscopy with energy dispersive spectrometry (SEM–EDS), Raman spectroscopy, X-ray diffraction (XRD), optical microscopy (OM) and granulometry. The analysis results enable us to infer the techniques used by the craftsmen in making the sculptures and provide a reliable evidence for the conservation and future protection of these and similar sculptures.

Effect of the BSCCO superconducting properties by tiny Y2O3 addition

2016 ◽  
Vol 30 (26) ◽  
pp. 1650328
Author(s):  
Yan Dong ◽  
Aimin Sun ◽  
Bin Xu ◽  
Hongtao Zhang ◽  
Meng Zhang
Keyword(s):  
Volume Fraction ◽  
Superconducting Properties ◽  
X Ray Diffraction ◽  
Critical Transition Temperature ◽  
Solid State Reaction Technique ◽  
X Ray ◽  
Oxide Addition ◽  
One Step ◽  
Step Transition ◽  
Y2o3 Addition

In this paper, the effect of tiny Y2O3 addition in (Bi,[Formula: see text]Pb)-2223 superconductor prepared by solid state reaction technique was studied. The properties of samples have been investigated via X-ray diffraction (XRD), resistance–temperature ([Formula: see text]–[Formula: see text]) curve, scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS). XRD data indicated that all samples are multiphase and the major phases are high-temperature phases and low-temperature phases. The volume fraction of (Bi,[Formula: see text]Pb)-2223 is not great change with tiny Y2O3 addition. All samples exhibit superconducting phase with the critical transition temperature and one-step transition, however, the transition width was decreased with the Y2O3 addition up to 0.04 wt.% and sharp increased with the excessive oxide addition. SEM pictures show that the Y2O3 appeared on the flake-type grains surface obviously, but the number and size of the hole between grains are decreased in the 0.04 wt.% addition.

One Step Synthesis and Characterization of Zirconia-Graphene Composites

2012 ◽  
Vol 600 ◽  
pp. 174-177 ◽  
Author(s):  
Jian Fei Xia ◽  
Zong Hua Wang ◽  
Yan Zhi Xia ◽  
Fei Fei Zhang ◽  
Fu Qiang Zhu ◽  
...  
Keyword(s):  
Synthesis And Characterization ◽  
Two Dimensional ◽  
X Ray Diffraction ◽  
X Ray ◽  
Graphene Composite ◽  
Transmission Electron ◽  
One Step ◽  
Ft Ir ◽  
Xrd Techniques

Zirconia-graphene composite (ZrO2-G) has been successfully synthesized via decomposition of ZrOCl2•6H2O in a water-isopropanol system with dispersed graphene oxide (GO) utilizing Na2S as a precursor could enable the occurrence of the deposition of Zr4+ and the deoxygenation of GO at the same time. Transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) techniques were used to characterize the samples. It was found that graphene were fully coated with ZrO2, and the ZrO2 existing in tetragonal phase, which resulted in the formation of two-dimensional composite.

Synthesis and Characterizations of Strontium Substituted Hydroxyapatite Thin Films

2010 ◽  
Vol 93-94 ◽  
pp. 231-234
Author(s):  
B. Hongthong ◽  
Satreerat K. Hodak ◽  
Sukkaneste Tungasmita
Keyword(s):  
Thin Film ◽  
Thin Films ◽  
Chemical Composition ◽  
Spin Coating ◽  
Phase Structure ◽  
Sol Gel ◽  
Cross Linking ◽  
X Ray Diffraction ◽  
X Ray ◽  
Sol Gel Process

Strontium substituted hydroxyapatite(SrHAp) were fabricated both in the form of powder as reference and thin film by using inorganic precursor reaction. The sol-gel process has been used for the deposition of SrHAp layer on stainless steal 316L substrate by spin coating technique, after that the films were annealed in air at various temperatures. The chemical composition of SrHAp is represented (SrxCa1-x)5(PO4)3OH, where x is equal to 0, 0.5 and 1.0. Investigations of the phase structure of SrHAp were carried out by using X-ray diffraction technique (XRD). The results showed that strontium is incorporated into hydroxyapatite where its substitution for calcium increases in the lattice parameters, and Sr3(PO4)2 can be detected at 900°C. The SEM micrographs showed that SrHAp films exhibited porous structure before develop to a cross-linking structure.

scholarly journals Nanocrystal, phase transformation and microstructure of Ni50Ti50 shape memory alloy

2018 ◽  
Vol 24 (02) ◽  
pp. 22-25
Author(s):  
Dovchinvanchig M ◽  
Chunwang Zhao
Keyword(s):  
Differential Scanning Calorimetry ◽  
Phase Transformation ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
One Step ◽  
Niti Matrix ◽  
Electronic Microscope

The nanocrystal, phase transformation and microstructure behavior of Ni50Ti50 shape memory alloy was investigated by scanning electronic microscope, X-ray diffraction and differential scanning calorimetry. The results showed that the microstructure of Ni-Ti binary alloy consists of the NiTi2 phase and the NiTi matrix phase. One-step phase transformation was observed alloy.

scholarly journals Low-temperature hydrothermal synthesis of hierarchical flower-like CuB2O4 superstructures

2020 ◽  
Vol 14 (2) ◽  
pp. 113-118
Author(s):  
Daniel Ursu ◽  
Anamaria Dabici ◽  
Marinela Miclau ◽  
Nicolae Miclau
Keyword(s):  
Thermal Stability ◽  
Low Temperature ◽  
Self Assembly ◽  
Hydrothermal Solution ◽  
Optical Measurements ◽  
Oriented Attachment ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
One Step

We report for the first time the fabrication of hierarchical ordered superstructure CuB2O4 with flower-like morphology via a one-step, low temperature hydrothermal method. The tetragonal structure of CuB2O4 was determined by X-ray diffraction and high-resolution transmission electron microscopy. Optical measurements attested of the quality of the fabricated CuB2O4 and high temperature X-ray diffraction confirmed its thermal stability up to 600 ?C. The oriented attachment growth and the hierarchical self-assembly of micrometer-sized platelets producing hierarchical superstructures with flower-like morphology are designed by pH of the hydrothermal solution. The excellent band gap, high thermal stability and hierarchical structure of the CuB2O4 are promising for the photovoltaic and photocatalytic applications.

Sign in / Sign up

Export Citation Format

Share Document