scholarly journals Utilization of Bio Ashes in Cement-based Materials: A Case Study in Cooperation with Pulp and Paper and Energy Production Industries in Sweden

2020 ◽  
Vol 63 (2) ◽  
pp. 63-78
Author(s):  
Arezou Babaahmadi ◽  
Gilles Plusquellec ◽  
Emilie L’Hôpital ◽  
Urs Mueller
Keyword(s):  
Power Plants ◽  
Activity Index ◽  
Cementitious Materials ◽  
Pulp And Paper ◽  
Supplementary Cementitious Materials ◽  
Index Test ◽  
Construction Sector ◽  
Cement Production ◽  
Pulp And Paper Industries

AbstractWorldwide increased concern of the CO2 emissions has led to the replacement of coal by biomass in combustion-based power plants. However, this would cause the scarcity of fly ash, one of the most well-known rest products from coal combustion, which is used as supplementary cementitious materials (SCM) in construction sector to reduce the large environmental footprint of cement production. Seeking to find alternative SCMs, this article aims to demonstrate the viability of using bio ashes in Sweden as SCM, which, due to lack of studies validating their value, are landfilled today. According to the obtained results, bio ashes produced at pulp and paper industries have a considerably consistent chemical composition and exhibit a satisfactory pozzolanic behaviour. Nevertheless, according to the conclusions of this study, the pozzolanicity of these alternative binders is not reflected equally with respect to the most known reactivity tests for common SCMs. The results imply that although “R3” tests method infers the pozzolanic characteristics of the bio ashes in focus of this study, the “activity index test” as well as “calcium consumption test” indicate otherwise.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

scholarly journals Influence of Milling Techniques on the Performance of Wheat Straw Ash in Cement Composites

2020 ◽  
Vol 10 (10) ◽  
pp. 3511
Author(s):  
Abdul Qudoos ◽  
Ehsanullah Kakar ◽  
Atta ur Rehman ◽  
In Kyu Jeon ◽  
Hong Gi Kim
Keyword(s):  
Particle Size ◽  
Wheat Straw ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Hydration Reaction ◽  
Cement Composites ◽  
Cement Production ◽  
X Ray ◽  
Worldwide Production ◽  
Straw Ash

The worldwide production of cement is growing every year due to its increased use in the construction. Cement production is affiliated with an environmental concern as it contributes to the CO2 emissions. It is imperative to reduce the cement production by incorporating supplementary cementitious materials in the cement composites. In this research study, wheat straw ash (WSA) was used as an alternate of ordinary Portland cement. The ash was ground separately with a ball mill and a disintegrator mill as well as with a combination of both to enhance its pozzolanic efficiency. Mortar and paste specimens were made by substituting cement with WSA (20% by weight). Ash specimens were examined in terms of particle size distribution, X-ray diffraction, and X-ray fluorescence analyses. The performance of the ash specimens in cement composites was examined via compressive and flexural strengths, and ultrasonic pulse velocity (UPV) tests. Isothermal calorimetric, thermogravimetric analyses (TGA), mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM) were also employed on the specimens. The results revealed that the particle size of the wheat straw ash specimens significantly reduced and specific surface area enhanced when ground with a combination of both milling techniques. Cement composites made with this type of ash demonstrated improved mechanical and physical properties, accelerated hydration reaction at the early ages, reduce calcium hydroxide content at the later ages, and densified microstructure.

scholarly journals Sustainable low-carbon binders and concretes

2020 ◽  
Vol 166 ◽  
pp. 06007
Author(s):  
Myroslav Sanytsky ◽  
Tetiana Kropyvnytska ◽  
Stanislav Fic ◽  
Hanna Ivashchyshyn
Keyword(s):  
Activity Index ◽  
Chemical Properties ◽  
High Volume ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Cement Matrix ◽  
Low Carbon ◽  
Blended Cements ◽  
Physical And Chemical

Sustainable development depends on a consistency of interests, social, ecological and economic, and that the interests are evaluated in a balanced manner. In order to reduce CO2 emissions, the conception of decreasing clinker factor and increasing the role of supplementary cementitious materials (SCMs) in the cementitious materials has high economical and environmental efficiency. The performance of clinkerefficient blended cements with supplementary cementitious materials were examined. The influence of superfine zeolite with increased surface energy on the physical and chemical properties of low-carbon blended cements is shown. Increasing the dispersion of cementitious materials contributes to the growth of their strength activity index due to compaction of cement matrix and pozzolanic reactions in unclincker part. In consequence of the early structure formation and the directed formation of the microstructure of the cement matrix is solving the problem of obtaining clinker-efficient concretes. Shown that low-carbon blended cements with high volume of SCMs are suitable, in principle, for producing structural concretes.

scholarly journals Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8291
Author(s):  
Mays A. Hamad ◽  
Mohammed Nasr ◽  
Ali Shubbar ◽  
Zainab Al-Khafaji ◽  
Zainab Al Masoodi ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Cement Production ◽  
Granulated Blast Furnace Slag ◽  
The Impact

The increase in cement production as a result of growing demand in the construction sector means an increase in energy consumption and CO2 emissions. These emissions are estimated at 7% of the global production of CO2. Ultra-high-performance concrete (UHPC) has excellent mechanical and durability characteristics. Nevertheless, it is costly and affects the environment due to its high amount of cement, which may reach 800–1000 kg/m3. In order to reduce the cement content, silica fume (SF) was utilized as a partial alternative to cement in the production of UHPC. Nevertheless, SF is very expensive. Therefore, the researchers investigated the use of supplementary cementitious materials cheaper than SF. Very limited review investigates addressed the impact of such materials on different properties of UHPC in comparison to that of SF. Thus, this study aims to summarize the effectiveness of using some common supplementary cementitious materials, including fly ashes (FA), ground granulated blast furnace slag (GGBS), metakaolin (MK) and rice husk ashes (RHA) in the manufacturing of UHPC, and comparing the performance of each material with that of SF. The comparison among these substances was also discussed. It has been found that RHA is considered a successful alternative to SF to produce UHPC with similar or even higher properties than SF. Moreover, FA, GGBS and MK can be utilized in combination with SF (as a partial substitute of SF) as a result of having less pozzolanic activity than SF.

scholarly journals Measurement of Pozzolanic Activity Index of Scoria, Pumice, and Rice Husk Ash as Potential Supplementary Cementitious Materials for Portland Cement

2017 ◽  
Vol 2017 ◽  
pp. 1-13 ◽  
Author(s):  
Hieronimi A. Mboya ◽  
Cecil K. King’ondu ◽  
Karoli N. Njau ◽  
Alex L. Mrema
Keyword(s):  
Portland Cement ◽  
Rice Husk ◽  
Rice Husk Ash ◽  
Activity Index ◽  
Cementitious Materials ◽  
Pozzolanic Activity ◽  
Supplementary Cementitious Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Setting Times

This work investigated the properties of scoria and pumice as supplementary cementitious materials (SCMs) for Portland cement and compared to those of rice husk ash (RHA). X-ray fluorescence, X-ray diffraction, and pozzolanic activity index (PAI) tests confirmed the suitability of these two materials as potential SCMs. Scoria and RHA samples achieved over 75% PAI at 7 days whereas pumice did this after 28 days. Initial and final mean setting times observed for the composite cement blended with these materials were 166 and 285 min, respectively. These setting times are longer than that of ordinary Portland cement but shorter compared to that of common Portland pozzolana cement. The ultimate mean compressive strengths achieved at 28 days of curing were 42.5, 44.8, and 43.0 MPa for scoria, pumice, and RHA, respectively, signifying that these materials are good SCMs. Higher fineness yielded higher ultimate mean strength. For instance, a scoria sample with a fineness of 575 m2/kg achieved the strength of 52.2 MPa after 28 days.

scholarly journals The Influence of Chemical Activators on the Hydration Behavior and Technical Properties of Calcium Sulfoaluminate Cements Blended with Ground Granulated Blast Furnace Slags

Buildings ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 268
Author(s):  
Milena Marroccoli ◽  
Antonio Telesca
Keyword(s):  
Blast Furnace ◽  
Co2 Emissions ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
X Ray Diffraction ◽  
Cement Production ◽  
Blended Cements ◽  
Calcium Sulfoaluminate ◽  
Technical Performance ◽  
Technical Properties

The manufacture of Ordinary Portland cement (OPC) generates around 8% of the global CO2 emissions related to human activities. The last 20 years have seen considerable efforts in the research and development of methods to lower the carbon footprint associated with cement production. Specific focus has been on limiting the use of OPC and employing alternative binders, such as calcium sulfoaluminate (CSA) cements, namely special hydraulic binders obtained from non-Portland clinkers. CSA cements could be considered a valuable OPC alternative thanks to their distinctive composition and technical performance and the reduced environmental impact of their manufacturing process. To additionally reduce CO2 emissions, CSA cements can also be blended with supplementary cementitious materials. This paper investigates the influence of two separately added chemical activators (NaOH or Na2CO3) on the technical properties and hydration behavior of four CSA blended cements obtained by adding to a plain CSA cement two different ground granulated blast furnace slags. Differential thermal-thermogravimetric, X-ray diffraction and mercury intrusion porosimetry analyses were done, along with shrinkage/expansion and compressive strength measurements.

scholarly journals Agricultural Solid Waste as Source of Supplementary Cementitious Materials in Developing Countries

Materials ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1112 ◽  
Author(s):  
Suvash Chandra Paul ◽  
Peter Mbewe ◽  
Sih Kong ◽  
Branko Šavija
Keyword(s):  
Developing Countries ◽  
Cementitious Materials ◽  
Agricultural Wastes ◽  
Cement Industry ◽  
Supplementary Cementitious Materials ◽  
Engineering Properties ◽  
Partial Replacement ◽  
Cement Production ◽  
Cement Replacement ◽  
Concrete Production

Concrete production utilizes cement as its major ingredient. Cement production is an important consumer of natural resources and energy. Furthermore, the cement industry is a significant CO2 producer. To reduce the environmental impact of concrete production, supplementary cementitious materials such as fly ash, blast furnace slag, and silica fume are commonly used as (partial) cement replacement materials. However, these materials are industrial by-products and their availability is expected to decrease in the future due to, e.g., closing of coal power plants. In addition, these materials are not available everywhere, for example, in developing countries. In these countries, industrial and agricultural wastes with pozzolanic behavior offer opportunities for use in concrete production. This paper summarizes the engineering properties of concrete produced using widespread agricultural wastes such as palm oil fuel ash, rice husk ash, sugarcane bagasse ash, and bamboo leaf ash. Research on cement replacement containing agricultural wastes has shown that there is great potential for their utilization as partial replacement for cement and aggregates in concrete production. When properly designed, concretes containing these wastes have similar or slightly better mechanical and durability properties compared to ordinary Portland cement (OPC) concrete. Thus, successful use of these wastes in concrete offers novel sustainable materials and contributes to greener construction as it reduces the amount of waste, while also minimizing the use of virgin raw materials for cement production. This paper will help the concrete industry choose relevant waste products and their optimum content for concrete production. Furthermore, this study identifies research gaps which may help researchers in further studying concrete based on agricultural waste materials.

Sign in / Sign up

Export Citation Format

Share Document