scholarly journals Influence of Milling Techniques on the Performance of Wheat Straw Ash in Cement Composites

2020 ◽  
Vol 10 (10) ◽  
pp. 3511
Author(s):  
Abdul Qudoos ◽  
Ehsanullah Kakar ◽  
Atta ur Rehman ◽  
In Kyu Jeon ◽  
Hong Gi Kim
Keyword(s):  
Particle Size ◽  
Wheat Straw ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Hydration Reaction ◽  
Cement Composites ◽  
Cement Production ◽  
X Ray ◽  
Worldwide Production ◽  
Straw Ash

The worldwide production of cement is growing every year due to its increased use in the construction. Cement production is affiliated with an environmental concern as it contributes to the CO2 emissions. It is imperative to reduce the cement production by incorporating supplementary cementitious materials in the cement composites. In this research study, wheat straw ash (WSA) was used as an alternate of ordinary Portland cement. The ash was ground separately with a ball mill and a disintegrator mill as well as with a combination of both to enhance its pozzolanic efficiency. Mortar and paste specimens were made by substituting cement with WSA (20% by weight). Ash specimens were examined in terms of particle size distribution, X-ray diffraction, and X-ray fluorescence analyses. The performance of the ash specimens in cement composites was examined via compressive and flexural strengths, and ultrasonic pulse velocity (UPV) tests. Isothermal calorimetric, thermogravimetric analyses (TGA), mercury intrusion porosimetry (MIP), and scanning electron microscopy (SEM) were also employed on the specimens. The results revealed that the particle size of the wheat straw ash specimens significantly reduced and specific surface area enhanced when ground with a combination of both milling techniques. Cement composites made with this type of ash demonstrated improved mechanical and physical properties, accelerated hydration reaction at the early ages, reduce calcium hydroxide content at the later ages, and densified microstructure.

Experimental investigation of pozzolanic concrete containing wheat straw ash

2019 ◽  
Vol 46 (10) ◽  
pp. 941-951
Author(s):  
Muhammad Riaz Ahmad ◽  
Muhammad Burhan Sharif ◽  
Hafiz Asad Ali ◽  
Munawar Hussain ◽  
Bing Chen
Keyword(s):  
Wheat Straw ◽  
Material Characterization ◽  
Setting Time ◽  
Xrd Analysis ◽  
Hydration Reaction ◽  
X Ray Diffraction ◽  
X Ray ◽  
Pozzolanic Material ◽  
Straw Ash

This study investigated the detailed optimization of wheat straw ash (WSA) as a pozzolanic material. Characterization of WSA as pozzolanic materials was carried out according to ASTM C618 and results indicated that WSA calcined at 700 °C for 2 h fulfilled ASTM C618 requirement and results were also confirmed by X-ray diffraction (XRD) analysis of WSA samples. Effect of WSA on setting time, mechanical properties, alkali–silica reaction (ASR), hydration process, and microstructure of cement paste (CP) and concrete was studied. Compressive and flexural strength of concrete mixture containing 14% WSA was 7.5% and 19.5% more as compared to control mixture at 28 days respectively. ASR expansion of mortar prisms and hydration temperature was reduced due to WSA incorporation. XRD and scanning electron microscopy investigations of CP indicated that WSA improved the microstructure of CP and was effective in imparting the pozzolanic characteristics during hydration reaction at 7 and 28 days.

scholarly journals Sustainable Masonry Mortars with Fly Ash, Blast Furnace Granulated Slag and Wheat Straw Ash

2021 ◽  
Vol 13 (21) ◽  
pp. 12245
Author(s):  
Slobodan Šupić ◽  
Vesna Bulatović ◽  
Mirjana Malešev ◽  
Vlastimir Radonjanin ◽  
Ivan Lukić
Keyword(s):  
Blast Furnace ◽  
Fly Ash ◽  
Wheat Straw ◽  
Volume Ratio ◽  
Cementitious Materials ◽  
Mechanical Tests ◽  
Supplementary Cementitious Materials ◽  
Cement Clinker ◽  
Granulated Slag ◽  
Straw Ash

Due to greenhouse gas emissions, the production of cement clinker is considered unsustainable and many attempts are being made to replace cement with alternative materials sourced from agriculture, industry and other urban practices, such as construction and demolition works. The aim of this paper is to analyze the effects of cement substitution by locally available waste materials in Serbia, such as fly ash (FA), blast furnace granulated slag (BFGS) and wheat straw ash (WSA), up to the 50% replacement volume rate in cement–lime mortars. As the effective application of supplementary cementitious materials (SCMs) in cement-based materials requires a comprehensive insight into their properties, a characterization of materials involving all relevant physical, chemical and mechanical tests is conducted. Ten different mortar mixed with ingredients of a volume ratio 1:2:4 (cementitious powder/lime/sand) were designed and their consistency, bulk density, capillary water absorption, flexural strength, compressive strength and thermal analysis (TGA/DTA) results were examined to determine the influence of the abovementioned SCMs on mortar properties. Research findings highlight the possibility of replacing cement with slag (50%), fly ash (30%) or wheat straw ash (30%) while maintaining its performance and improving the economic and environmental impacts of masonry mortar production.

scholarly journals Special Issue: Supplementary Cementitious Materials in Concrete, Part I

Materials ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2291
Author(s):  
Alessandro P. Fantilli ◽  
Daria Jóźwiak-Niedźwiedzka
Keyword(s):  
Environmental Impact ◽  
Portland Cement ◽  
Building Materials ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Special Issue ◽  
Cement Production ◽  
Concrete Part

The environmental impact of the Portland cement production and the large use of cement-based building materials is a growing problem [...]

Research Progress on the Hydration of Portland Cement with Calcined Clay and Limestone

2021 ◽  
Vol 1036 ◽  
pp. 240-246
Author(s):  
Jin Tang ◽  
Su Hua Ma ◽  
Wei Feng Li ◽  
Hui Yang ◽  
Xiao Dong Shen
Keyword(s):  
Mechanical Properties ◽  
Portland Cement ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Research Progress ◽  
Hydration Reaction ◽  
Hydration Products ◽  
Early Hydration ◽  
Calcined Clay ◽  
Dense Microstructure

The use of calcined clay and limestone as supplementary cementitious materials, can have a certain influence on the hydration of Portland cement. This paper reviewed the influence of limestone and calcined clay and the mixture of limestone and calcined clay on the hydration of cement. Both limestone and calcined clay accelerate the hydration reaction in the early hydration age and enhance the properties of cement. Limestone reacts with C3A to form carboaluminate, which indirectly stabilized the presence of ettringite, while calcined clay consumed portlandite to form C-(A)-S-H gel, additional hydration products promote the densification of pore structure and increase the mechanical properties. The synergistic effect of calcined clay and limestone stabilize the existence of ettringite and stimulate the further formation of carboaluminate, as well as the C-(A)-S-H gel, contributed to a dense microstructure.

scholarly journals Effect of Locally Available Wheat Straw Ash in Developing High Strength Concrete

2021 ◽  
pp. 19-28
Author(s):  
Muhammad Armaghan Siffat ◽  
Muhammad Ishfaq ◽  
Afaq Ahmad ◽  
Khalil Ur Rehman ◽  
Fawad Ahmad
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Wheat Straw ◽  
High Strength Concrete ◽  
High Strength ◽  
Optimum Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Strength Concrete ◽  
Straw Ash

This study is supervised to assess the characteristics of the locally available wheat straw ash (WSA) to consume as a substitute to the cement and support in enhancing the mechanical properties of concrete. Initially, after incineration at optimum temperature of 800°C for 0.5, the ash of wheat straw was made up to the desirable level of fineness by passing through it to the several grinding cycles. Subsequently, the X-ray fluorescence (XRF) along with X-ray diffraction (XRD) testing conducted on ash of wheat straw for the evaluation its pozzolanic potential. Finally, the specimens of concrete were made by consuming 10% and 20% percentages of wheat straw ash as a replacement in concrete to conclude its impact on the compressive strength of high strength concrete. The cylinders of steel of dimensions 10cm diameter x 20cm depth were acquired to evaluate the compressive strength of high strength concrete. The relative outcomes of cylinders made of wheat straw ash substitution presented the slight increase in strength values of the concrete. Ultimately, the C-100 blends and WSA aided cement blends were inspected for the rheology of WSA through FTIR spectroscopy along with Thermogravimetric technique. The conclusions authenticate the WSA potential to replace cement in the manufacturing of the high strength concrete.

Sol Gel Characterization of Nano Kaolin

2013 ◽  
Vol 856 ◽  
pp. 285-289
Author(s):  
M.S. Muhd Norhasri ◽  
M.S. Hamidah ◽  
A.G. Abd Halim ◽  
A. Mohd Fadzil
Keyword(s):  
Particle Size ◽  
Surface Area ◽  
Sol Gel ◽  
High Energy ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Process Time ◽  
Strength And Durability ◽  
Clay Kaolin

Nano kaolin is product from kaolin also known as white clay. Kaolin was established as supplementary cementitious materials in concrete. The inclusion of kaolin in concrete enhances strength and durability properties and prolongs concrete life span. In this research, nanokaolin will be develop by using sol gel technique by that involves high energy milling. The process of milling been influenced by time of milling, ball and jar type. Ceramic type Zirconia (Zi) is been used as jar and ball type in this process. Time of milling was set from four (4) hours and one (1) days. Sample will be analyse by using particle size analyser to see the particle size and surface area of kaolin. From the result shows the optimum milling period for nanokaolin is one day base on particle size compare to 4 hours. Furthermore, one day milling produces a massive increment of surface area compare to others. In conclusion, one day can be considered as the optimum cycle time in the production of nano kaolin.

scholarly journals Implementation of natural and artificial materials in Portland cement

2020 ◽  
Vol 74 (3) ◽  
pp. 147-161
Author(s):  
Pero Dabic ◽  
Damir Barbir
Keyword(s):  
Portland Cement ◽  
Cementitious Materials ◽  
Environmental Benefits ◽  
Supplementary Cementitious Materials ◽  
Hardened Concrete ◽  
Cement Composites ◽  
Artificial Materials ◽  
Waste Container ◽  
Almost All ◽  
The Impact

For the preparation of modern cement and concrete, supplementary cementitious materials (SCM) have become essential ingredients. The technical, economic and environmental advantages of using SCM have become unquestionable. The main technical reasons for their use are the improvement of the workability of fresh concrete and durability of hardened concrete. Actually, SCM affect almost all concrete properties, while environmental and economic reasons may be more significant than technical reasons. These ingredients can reduce the amount of Portland cement used in cement composites, resulting in economic and environmental benefits. In addition, many of the SCM are industrial by-products, which can otherwise be considered as waste. This paper presents a literature review of the present knowledge on the impact of natural zeolite, waste construction brick and waste container glass on physical, chemical and mechanical properties of Portland cement as the most commonly used cement in the world.

scholarly journals Production of Ultra-High-Performance Concrete with Low Energy Consumption and Carbon Footprint Using Supplementary Cementitious Materials Instead of Silica Fume: A Review

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8291
Author(s):  
Mays A. Hamad ◽  
Mohammed Nasr ◽  
Ali Shubbar ◽  
Zainab Al-Khafaji ◽  
Zainab Al Masoodi ◽  
...  
Keyword(s):  
Energy Consumption ◽  
Silica Fume ◽  
High Performance ◽  
High Performance Concrete ◽  
Cementitious Materials ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Cement Production ◽  
Granulated Blast Furnace Slag ◽  
The Impact

The increase in cement production as a result of growing demand in the construction sector means an increase in energy consumption and CO2 emissions. These emissions are estimated at 7% of the global production of CO2. Ultra-high-performance concrete (UHPC) has excellent mechanical and durability characteristics. Nevertheless, it is costly and affects the environment due to its high amount of cement, which may reach 800–1000 kg/m3. In order to reduce the cement content, silica fume (SF) was utilized as a partial alternative to cement in the production of UHPC. Nevertheless, SF is very expensive. Therefore, the researchers investigated the use of supplementary cementitious materials cheaper than SF. Very limited review investigates addressed the impact of such materials on different properties of UHPC in comparison to that of SF. Thus, this study aims to summarize the effectiveness of using some common supplementary cementitious materials, including fly ashes (FA), ground granulated blast furnace slag (GGBS), metakaolin (MK) and rice husk ashes (RHA) in the manufacturing of UHPC, and comparing the performance of each material with that of SF. The comparison among these substances was also discussed. It has been found that RHA is considered a successful alternative to SF to produce UHPC with similar or even higher properties than SF. Moreover, FA, GGBS and MK can be utilized in combination with SF (as a partial substitute of SF) as a result of having less pozzolanic activity than SF.

scholarly journals Combined effects of nano-silica and silica fume on the mechanical behavior of recycled aggregate concrete

2021 ◽  
Vol 10 (1) ◽  
pp. 819-838
Author(s):  
Tang Yunchao ◽  
Chen Zheng ◽  
Feng Wanhui ◽  
Nong Yumei ◽  
Li Cong ◽  
...  
Keyword(s):  
Silica Fume ◽  
Structural Engineering ◽  
Tensile Tests ◽  
Cementitious Materials ◽  
Recycled Aggregate Concrete ◽  
Supplementary Cementitious Materials ◽  
Recycled Aggregate ◽  
Hydration Reaction ◽  
Nano Silica ◽  
Aggregate Concrete

Abstract Recycled aggregate concrete (RAC) is an environmentally friendly material. However, owing to inherent characteristics of the recycled aggregate (RA), it is difficult to promote and apply it in structural engineering. Silica fume (SF) and nano-silica (NS) have different characteristics as additives for RAC. It has been proven that adding SF only enhances the strength of RAC at a later stage, and NS can improve the early strength of RAC owing to its high pozzolanic activity. In this study, to further improve the properties of RAC, two types of additives were combined into RAC, which was named SF-NS-modified RAC (SSRAC). Compression and split tensile tests were conducted to analyze the mechanical properties of SSRAC at different curing ages. The results indicated that the combined addition of NS and SF improved the performance of RAC at early and later curing ages. Scanning electron microscopy and X-ray diffraction analyses were performed to explore the NS and SF mechanism. The results indicated that SF and NS in SSRAC had a good pozzolanic effect and underwent a secondary hydration reaction with calcium hydroxide to increase the production of calcium silicate hydrate, resulting in an increase in the properties of the interface transition zone. Finally, 6% SF and 2 or 3% NS are recommended as supplementary cementitious materials for RAC.

Sign in / Sign up

Export Citation Format

Share Document