Modelling and simulation of explosions in soil interacting with deformable structures

2012 ◽  
Vol 2 (4) ◽  
Author(s):  
Björn Zakrisson ◽  
Hans-Áke Häggblad ◽  
Pär Jonsén
Keyword(s):  
Numerical Simulations ◽  
Initial Conditions ◽  
Standard Procedure ◽  
Field Trials ◽  
Military Vehicles ◽  
Three Phase ◽  
Phase Medium ◽  
Deformable Structure ◽  
Cap Model ◽  
Soil Behaviour

AbstractA detonating explosive interacting with a deformable structure is a highly transient and non-linear event. In field blast trials of military vehicles, a standard procedure is often followed in order to reduce the uncertainties and increase the quality of the test. If the explosive is buried in the ground, the state of the soil must meet specific demands. In the present work, laboratory experiments have been performed to characterize the behaviour of a soil material. Soil may be considered a three-phase medium, consisting of solid grains, water and air. Variations between the amounts of these phases affect the mechanical properties of the soil. The experimental outcome has formed input data to represent the soil behaviour included in a three-phase elastic-plastic cap model. This unified constitutive model for soil has been used for numerical simulations representing field blast trials, where the explosive load is interacting with a deformable structure. The blast trials included explosive buried at different depths in wet or dry sand. A dependence of the soil initial conditions can be shown, both in the past field trials along with the numerical simulations. Even though some deviations exist, the simulations showed in general acceptable agreement with the experimental results.

scholarly journals The Impact of Initial Conditions in N-Body Simulations of Debris Discs

2015 ◽  
Vol 32 ◽  
Author(s):  
E. Thilliez ◽  
S. T. Maddison
Keyword(s):  
Numerical Simulations ◽  
Initial Conditions ◽  
Parent Body ◽  
Dust Trapping ◽  
Physical Context ◽  
Disc Width ◽  
Wide Range ◽  
Belt Width ◽  
New Generation ◽  
The Impact

AbstractNumerical simulations are a crucial tool to understand the relationship between debris discs and planetary companions. As debris disc observations are now reaching unprecedented levels of precision over a wide range of wavelengths, an appropriate level of accuracy and consistency is required in numerical simulations to confidently interpret this new generation of observations. However, simulations throughout the literature have been conducted with various initial conditions often with little or no justification. In this paper, we aim to study the dependence on the initial conditions of N-body simulations modelling the interaction between a massive and eccentric planet on an exterior debris disc. To achieve this, we first classify three broad approaches used in the literature and provide some physical context for when each category should be used. We then run a series of N-body simulations, that include radiation forces acting on small grains, with varying initial conditions across the three categories. We test the influence of the initial parent body belt width, eccentricity, and alignment with the planet on the resulting debris disc structure and compare the final peak emission location, disc width and offset of synthetic disc images produced with a radiative transfer code. We also track the evolution of the forced eccentricity of the dust grains induced by the planet, as well as resonance dust trapping. We find that an initially broad parent body belt always results in a broader debris disc than an initially narrow parent body belt. While simulations with a parent body belt with low initial eccentricity (e ~ 0) and high initial eccentricity (0 < e < 0.3) resulted in similar broad discs, we find that purely secular forced initial conditions, where the initial disc eccentricity is set to the forced value and the disc is aligned with the planet, always result in a narrower disc. We conclude that broad debris discs can be modelled by using either a dynamically cold or dynamically warm parent belt, while in contrast eccentric narrow debris rings are reproduced using a secularly forced parent body belt.

scholarly journals AC Current Ripple in Three-Phase Four-Leg PWM Converters with Neutral Line Inductor

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1430
Author(s):  
Aleksandr Viatkin ◽  
Riccardo Mandrioli ◽  
Manel Hammami ◽  
Mattia Ricco ◽  
Gabriele Grandi
Keyword(s):  
Numerical Simulations ◽  
Pulse Width Modulation ◽  
Neutral Line ◽  
Experimental Tests ◽  
Performance Comparison ◽  
Design Parameters ◽  
Switching Frequency ◽  
Three Phase ◽  
Ac Current ◽  
Current Ripple

This paper presents a comprehensive study of peak-to-peak and root-mean-square (RMS) values of AC current ripples with balanced and unbalanced fundamental currents in a generic case of three-phase four-leg converters with uncoupled AC interface inductors present in all three phases and in neutral. The AC current ripple characteristics were determined for both phase and neutral currents, considering the sinusoidal pulse-width modulation (SPWM) method. The derived expressions are simple, effective, and ready for accurate AC current ripple calculations in three- or four-leg converters. This is particularly handy in the converter design process, since there is no need for heavy numerical simulations to determine an optimal set of design parameters, such as switching frequency and line inductances, based on the grid code or load restrictions in terms of AC current ripple. Particular attention has been paid to the performance comparison between the conventional three-phase three-leg converter and its four-leg counterpart, with distinct line inductance values in the neutral wire. In addition to that, a design example was performed to demonstrate the power of the derived equations. Numerical simulations and extensive experimental tests were thoroughly verified the analytical developments.

Dynamics of Dual-Cell Series Miura-Ori Structures With Different Types of Inter-Cell Connections

2021 ◽  
Author(s):  
Hai Zhou ◽  
Haiping Wu ◽  
Jian Xu ◽  
Hongbin Fang
Keyword(s):  
Steady State ◽  
Numerical Simulations ◽  
Theoretical Basis ◽  
Initial Conditions ◽  
Cell Structure ◽  
Dynamic Responses ◽  
Complex Environment ◽  
Current State ◽  
Different Types ◽  
Cell Series

Abstract Origami-inspired structures and materials have shown remarkable properties and performances originating from the intricate geometries of folding. Origami folding could be a dynamic process and origami structures could possess rich dynamic characteristics under external excitations. However, the current state of dynamics of origami has mostly focused on the dynamics of a single cell. This research has performed numerical simulations on multi-stable dual-cell series Miura-Ori structures with different types of inter-cell connections based on a dynamic model that does not neglect in-plane mass. We introduce a concept of equivalent constraint stiffness k* to distinguish different types of inter-cell connections. Results of numerical simulations reveal the multi-stable dual-cell structure will exhibit a variety of complex nonlinear dynamic responses with the increasing of connection stiffness because of the deeper energy well it has. The connection stiffness has a strong effect on the steady-state dynamic responses under different excitation amplitudes and a variety of initial conditions. This effect makes us able to adjust the dynamic behaviors of dual-cell series Miura-Ori structure to our needs in a complex environment. Furthermore, the results of this research could provide us a theoretical basis for the dynamics of origami folding and serve as guidelines for designing dynamic applications of origami metastructures and metamaterials.

Evaluation of Cumulative Damage From Drop to Puncture Conditions

2012 ◽  
Author(s):  
Woo-Seok Choi ◽  
Sanghoon Lee ◽  
Kyoung-Sik Bang ◽  
Ju-Chan Lee ◽  
Ki-Seog Seo
Keyword(s):  
Numerical Simulations ◽  
Initial Conditions ◽  
Water Immersion ◽  
Cumulative Damage ◽  
Single Event ◽  
Physical Test ◽  
Sequential Event ◽  
Physical Tests ◽  
Hypothetical Accident ◽  
Accident Conditions

During safety assessments of transport packages, cumulative damages are naturally accumulated for assessments performed using physical tests specimens. However, the cumulative damages are not as easily accounted when assessments are by numerical simulations. While analysts are comfortable with simulating packages for single events, it is not yet common practice to incorporate the effect handed over from a former event to the next, in a series of sequential load events. Thus, many numerical simulations in SAR (Safety Analysis Report) represent just a single event in the series of sequential event comprising the required accident condition. These single event numerical simulations are then based on initial conditions different from the analogous physical test specimen, which could contribute to a growing disparity in results between assessments by physically testing compared to numerical simulation. The reason why analyses do not consider the cumulative damage is difficulties in delivering the final result of the previous analysis to the current analysis. The hypothetical accident conditions described in the IAEA regulations include drop, puncture, fire, and water immersion conditions, which should be sequentially simulated. There can be cumulative damage between two accident conditions, such as drop and puncture, puncture and fire, and so forth. In this study, as the first step to consider cumulative damage, an analysis technology to perform a puncture analysis incorporating the final response field from a prior drop analysis is proposed. The necessity and validity of the proposed analysis technology are evaluated by a comparison with the results obtained by performing each analysis independently.

scholarly journals Analysis of Input Voltage Switching Ripple in Three-Phase Four-Wire Split Capacitor PWM Inverters

Energies ◽  
2020 ◽  
Vol 13 (19) ◽  
pp. 5076 ◽  
Author(s):  
Manel Hammami ◽  
Riccardo Mandrioli ◽  
Aleksandr Viatkin ◽  
Mattia Ricco ◽  
Gabriele Grandi
Keyword(s):  
Numerical Simulations ◽  
Comprehensive Evaluation ◽  
Experimental Tests ◽  
Input Voltage ◽  
Switching Voltage ◽  
Two Phase ◽  
Voltage Ripple ◽  
Battery Chargers ◽  
Three Phase ◽  
Split Capacitor

Three-phase, four-wire split capacitor inverters are currently employed in many applications, such as photovoltaic systems, battery chargers for electric vehicles, active power filters, and, in general, in all grid-tied applications that deal with possible grid voltage and/or current unbalances. This paper provides a comprehensive evaluation of the capacitor-switching voltage ripple and dc-link switching voltage ripple for the three-phase, four-wire, split capacitor inverters. Specifically, analytical formulations of the peak-to-peak and rms values of the voltage ripples are originally pointed out in this paper and determined in the case of balanced three-phase and unbalanced (two-phase and single-phase) output (ac) currents. The obtained results can help in designing the considered inverter and sizing of the dc-link capacitors. Reference is made to the sinusoidal PWM modulation and sinusoidal three-phase output currents with an almost unity power factor, representing a grid-connected application. Extensive numerical simulations have been carried out to thoroughly verify all the analytical developments presented in this paper. Furthermore, some experimental tests, having balanced output currents on the ac side, have been accomplished, validating numerical simulations and analytical developments.

scholarly journals Convective Instability Underneath Midlevel Clouds: Comparisons between Numerical Simulations and VHF Radar Observations

2015 ◽  
Vol 54 (11) ◽  
pp. 2217-2227 ◽  
Author(s):  
Atsushi Kudo ◽  
Hubert Luce ◽  
Hiroyuki Hashiguchi ◽  
Richard Wilson
Keyword(s):  
Numerical Simulations ◽  
Initial Conditions ◽  
Radiosonde Data ◽  
Cloud Base ◽  
Very High Frequency ◽  
Vhf Radar ◽  
Turbulent Layer ◽  
Radar Observations ◽  
Mu Radar ◽  
Upper Level

AbstractDeep turbulent layers can sometimes be observed on the underside of clouds that extend above upper-level frontal zones. In a recent study based on 3D numerical simulations with idealized initial conditions, it was found that midlevel cloud-base turbulence (MCT) can result from Rayleigh–Bénard-like convection as a result of cooling by sublimation of precipitating snow into dry and weakly stratified subcloud layers. In the present study, numerically simulated MCT was compared with a turbulent layer detected by the very high-frequency (VHF) middle- and upper-atmosphere (MU) radar during the passage of an upper-level front topped by clouds. The simulations were initialized with thermodynamic parameters derived from simultaneous radiosonde data. It was found that some important features of the simulated MCT (such as the scale of convection and vertical wind velocity perturbations) agreed quantitatively well with those reported in radar observations. Even if the possibility of other generation mechanisms cannot be ruled out, the good agreement strongly suggests that the MU radar actually detected MCT.

Sign in / Sign up

Export Citation Format

Share Document