scholarly journals No Chance of Success. State Agrarian Real Estate 1946–1949. A Contribution to the Research on the History of the State Agricultural Sector in Poland

2021 ◽  
Vol 39 (1) ◽  
pp. 250-265
Author(s):  
Małgorzata Machałek

Abstract The years of activity of the PNZ (Państwowe Nieruchomości Ziemskie – State Agrarian Real Estate) fell into the period of post-war agricultural reconstruction and management of Recovered Territories. Initially, their main task was to prepare for the parceling out of large landed estates, which was important for the settlement campaign. The target task was to run specialized farms that would supply the entire agriculture with seed and breeding material. After the escape of S. Mikołajczyk, the communists changed the priorities of PNZ activity, which from then on were to deal with large-scale production, and above all, manage about 1,200 hectares of agricultural land. The vast majority of the area used by PNZ was located in the western and northern regions of the country. The best conditions existed in those areas for establishing a state sector in agriculture. In spite of many achievements, PNZ was liquidated because the communists wanted to get rid of the prewar staff of specialists, mostly landowners, from the enterprise. This decision was political in nature. State farms were then created to replace PNZ.

Author(s):  
Khatai Aliyev ◽  
Ilkin Gasimov

The importance of the agricultural sector in the economy of Azerbaijan is high. This sector has always been at the center of economic reforms by the government. This chapter overviews economic and trade policies of the government focused on the development of agricultural production since 1991. Authors carry out analysis of policy changes during separate development stages. The research output presents agricultural policy before the oil boom as mainly devoted to achieving structural transformation from centrally planned economy to the market environment. Within the oil boom period, the government provided substantial fiscal and technical support to the agricultural sector as well as applied tax incentives to farmers but did not pay attention to the transformation from family farming to medium and large-scale production. However, fiscal and macroeconomic challenges of post-oil boom period forced the government to focus on increasing efficiency of the subsidies and incentives and implementation of further agricultural reforms.


2020 ◽  
Vol 175 ◽  
pp. 10008
Author(s):  
Thi Hoai Nguyen ◽  
Duc Luan Nguyen

In this paper, the authors analyze the current situation of agricultural production in Vietnam and affirm that fragmentation is one of the basic causes leading to ineffective potentials and low labor productivity. Based on this, the authors propose a number of solutions to convert small-scale production to large-scale production in order to improve labor productivity and optimally exploit resources in the agricultural sector in Vietnam today.


2003 ◽  
Vol 28 (4) ◽  
pp. 41-52 ◽  
Author(s):  
Ravindra H Dholakia

This paper follows a narrow definition of agri-products that include products of agriculture, horticulture, floriculture, animal husbandry, and poultry. Like most other states in India, Gujarat has also prepared several reports and policy papers assessing the potential for agro-processing, identifying constraints in the development and exports of agri-products, suggesting or announcing several important policy measures for removing physical and financial infrastructural bottlenecks, and promoting R&D activities in the sector. However, these exercises lack realistic assessment of the potential, important features of agri-exports from the state, and Gujarat's comparative advantage over the rest of the country in specific product categories. This paper addresses these aspects. A recent survey of exports originating from Gujarat conducted by the Gujarat Industrial Technical Consultancy Organization (GITCO) estimated that, during the year 2000–01, Gujarat contributed Rs 495 billion (or 20.8%) out of the total national exports of Rs 2,385 billion. However, excluding gems and jewellery and petroleum products, Gujarat's share in the national exports is only 9.2 per cent. Compared to this overall proportion, Gujarat's share in national exports in commodities like groundnut, oil-meals, castor oil, poultry, dairy products, spices, sesame and niger seeds, and processed food, fruits, and vegetables is much higher indicating Gujarat's revealed comparative advantage in these product categories. Some important features of the exports activity in Gujarat are: Only 20 per cent are pure traders in the export business. Only a quarter of the units have ‘export house’ or upward status for special benefits. More than 40 per cent of the exporting units have come up after 1991–92. Two-thirds of the exporters belong to small and medium enterprises. Export intensity of Gujarat's agricultural sector is about 12 per cent. Agri-exports represent excess supply and hence highly volatile and fluctuating activity over time. Agri-exports are price elastic. Agri-exports would be highly responsive to exchange rate depreciation. In recent years, Gujarat's agriculture shows considerable dynamic characteristics in contrast to the gloomy official income estimates in the sector. Nineteen out of 30 crops show significant positive time trend in area while five crops show significant negative trend. The cropping pattern in Gujarat has been shifting away from the low value traditional crops to high value commercial crops with business and export potential. A detailed consideration of yield rates of different crops in the state and other states over the past three decades indicates a realistic potential of 5 per cent per annum growth rate for agriculture in Gujarat over the next eight to ten years. In order to ensure exclusive and regular supply to the export market, quality standards have to be according to the foreign destination and not the domestic market. This calls for large-scale production, assured input supplies, good logistics, infrastructural facilities, R&D activities, and technological upgradation. This involves giving priority to investments in several infrastructural facilities and agricultural R&D besides perfecting agricultural land market and encouraging contract farming in the state.


2009 ◽  
Vol 55 (No. 5) ◽  
pp. 250-256
Author(s):  
J. Bartůšková ◽  
J. Homolka

Changes in the land law, which occurred after 1948, still influence the whle Czech countryside to this day. Typical features of Czech agriculture, i.e. the fragmentation of ownership of the agricultural land fund and the high share of leased agricultural land, which is a direct consequence of the socialistic large-scale production, continue even despite extensive legal changes after 1989. The changes in the Czech land law after 1989 brought about not only the legal guarantees for owners but also new problems, which are still necessary to solve. An important tool of the solution of the present Czech agriculture problems is represented by land adjustments. The membership of the Czech Republic in the European Union on one hand led to the simplification of land acquisition for some foreigners, however; on the other hand it has not influenced in principle the structure of landowners. Still in 2008, the questions of the atonement of property injustices are finished yet regarding the churches concerning agricultural and forest land. A new civil code, currently in process, which can influence some legal relations to the land, has not been put forward to the Parliament yet.


1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.


2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.


Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.


Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.


Author(s):  
Yuting Luo ◽  
Zhiyuan Zhang ◽  
Fengning Yang ◽  
Jiong Li ◽  
Zhibo Liu ◽  
...  

Large-scale production of green hydrogen by electrochemical water splitting is considered as a promising technology to address critical energy challenges caused by the extensive use of fossil fuels. Although nonprecious...


Sign in / Sign up

Export Citation Format

Share Document