scholarly journals Implementing kNearest Neighbor Methods to Predict Car Prices

2021 ◽  
pp. 58
Author(s):  
Deshiwa Budilaksana ◽  
I Made Sukarsa ◽  
Anak Agung Ketut Agung Cahyawan Wiranatha
Keyword(s):  
Mean Absolute Error ◽  
Absolute Error ◽  
Market Demand ◽  
Test Results ◽  
Variance Inflation Factor ◽  
Daily Lives ◽  
Demand Prediction ◽  
Human Need ◽  
Inflation Factor ◽  
Specific Influence

The demand for automotive in Indonesia has never subsided, considering that the human need for transportation greatly affects people's daily lives. Various attempts are made by manufacturers to produce cars of a quality that is comparable to the costs incurred and following market demand. Prediction is a process that can be done to achieve this goal. One of the prediction methods that can be used in this case is the kNearest Neighbor. The prediction process consists of a preprocessing stage that cleans and filters unnecessary variables, followed by a variable multicollinearity test stage with Variance Inflation Factor (VIF). The multicollinearity test found 4 variables that had a specific influence in predicting the VIF value of these variables, respectively 2.22, 2.08, 1.53, 1.10 for Horse Power, Car Width, Highend, and, Hatchback respectively. The four variables of the VIF test results have a positive correlation with the price variable as the dependent variable. The prediction model is made using 4 variables selected based on the VIF test, to determine the accuracy of the method used, the Linear Regression model and, the kNearest Neighbor through the validation test with Mean Absolute Error (MAE) and R2. The kNearest Neighbor method produces an MAE test of 0.06 and R2 results are 0.843. This can be concluded if the overall kNearest Neighbor method has qualified performance in making predictions with continuous value variables or in other words using the concept of regression.

Knee Joint Proprioception Following Anterior Cruciate Ligament Reconstruction

1992 ◽  
Vol 1 (2) ◽  
pp. 103-110 ◽  
Author(s):  
Rod A. Harter ◽  
Louis R. Osternig ◽  
Kenneth M. Singer
Keyword(s):  
Knee Joint ◽  
Mean Absolute Error ◽  
Cruciate Ligament ◽  
Absolute Error ◽  
Position Sense ◽  
Joint Position Sense ◽  
Joint Position ◽  
Test Results ◽  
Anterior Cruciate

This study evaluated knee joint position sense in the ACL-reconstructed and contralateral normal knees of 48 male and female subjects (M age 27.6 ± 6.9 yrs). Subjects were blindfolded and tested on their ability to actively reproduce five passively placed knee positions at 5° intervals between 35 and 15° of knee flexion. Mean algebraic target angle error and mean absolute error values were measured in degrees. The grand mean absolute error for the postsurgical knees at all positions was 5.4 ± 3.2°, compared with 5.2 ± 2.7° for the normal contralateral knees. There were no significant differences in knee joint position sense between the postsurgical and normal contralateral limbs at any of the five positions tested. Pivot shift, anterolateral rotatory instability, and Lachman test results were poorly correlated with knee joint position sense. The results suggest that if knee joint position sense was indeed disrupted by ACL injury and reconstructive surgery, related sensory mechanisms compensated for any proprioceptive loss prior to the minimum 2-yr postsurgical follow-up period employed in our study.

scholarly journals Rancangan Penjadwalan Produksi Brankas Dengan Metode Heijunka Di PT. Chubb Safes Indonesia

2021 ◽  
Vol 6 (1) ◽  
pp. 9
Author(s):  
Sopian Maulana ◽  
Nunung Nuhasanah
Keyword(s):  
Production Scheduling ◽  
Mean Absolute Error ◽  
Moving Average ◽  
Working Hours ◽  
Absolute Error ◽  
Exponential Smoothing ◽  
Production Plan ◽  
Daily Production ◽  
Demand Prediction ◽  
Single Exponential

<p><strong>PT. Chubb Safes Indonesia (PT. CSI) is a company engaged in manufacturing and producing safety products for the public. In carrying out safe production, there is often a difference between the production plan made by the production department and the actual production done by the operator on the production floor. From the production plan that has been made, on the week-6 to week-8 from PT. CSI is only 76% to 89% of the production plan achieved. PT. This CSI has a FIFO (First In First Out) scheduling system and implements a mixed production system. Based on the problems experienced by PT. CSI, this can be minimized by predicting demand using the single moving average and single exponential smoothing method then the best demand prediction is obtained based on the value of the smallest deviation using the Mean Absolute Error (MAE) method where the results are obtained in the next week or the 11th week. PT. CSI can produce as many as 472 units of safes in one week. And by scheduling production using the heijunka method PT. CSI can perform 472 safe productions within 75 working hours of the available 88 working hours resulting in an efficiency of 15%. Then PT. CSI can increase daily production capacity from 424 units in the week-8 to 554 units of safes or 92 units of safes per day.</strong></p><p><strong><em>Keywords</em></strong> – <em>Demand prediction, Production scheduling, Heijunka method, Single moving average, Single exponential smoothing, Mean absolute error </em></p>

Contactless Core-Temperature Monitoring by Infrared Thermal Sensor using Mean Absolute Error Analysis

2020 ◽  
Vol 15 ◽  
Author(s):  
Fahad Layth Malallah ◽  
Baraa T. Shareef ◽  
Mustafah Ghanem Saeed ◽  
Khaled N. Yasen
Keyword(s):  
Body Temperature ◽  
Embedded System ◽  
Core Temperature ◽  
Integrated Circuit ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Thermal Sensor ◽  
Human Face ◽  
Body Contact ◽  
Arduino Microcontroller

Aims: Normally, the temperature increase of individuals leads to the possibility of getting a type of disease, which might be risky to other people such as coronavirus. Traditional techniques for tracking core-temperature require body contact either by oral, rectum, axillary, or tympanic, which are unfortunately considered intrusive in nature as well as causes of contagion. Therefore, sensing human core-temperature non-intrusively and remotely is the objective of this research. Background: Nowadays, increasing level of medical sectors is a necessary targets for the research operations, especially with the development of the integrated circuit, sensors and cameras that made the normal life easier. Methods: The solution is by proposing an embedded system consisting of the Arduino microcontroller, which is trained with a model of Mean Absolute Error (MAE) analysis for predicting Contactless Core-Temperature (CCT), which is the real body temperature. Results: The Arduino is connected to an Infrared-Thermal sensor named MLX90614 as input signal, and connected to the LCD to display the CCT. To evaluate the proposed system, experiments are conducted by participating 31-subject sensing contactless temperature from the three face sub-regions: forehead, nose, and cheek. Conclusion: Experimental results approved that CCT can be measured remotely depending on the human face, in which the forehead region is better to be dependent, rather than nose and cheek regions for CCT measurement due to the smallest

scholarly journals Towards Tracking of Deep Brain Stimulation Electrodes Using an Integrated Magnetometer

Sensors ◽  
2021 ◽  
Vol 21 (8) ◽  
pp. 2670
Author(s):  
Thomas Quirin ◽  
Corentin Féry ◽  
Dorian Vogel ◽  
Céline Vergne ◽  
Mathieu Sarracanie ◽  
...  
Keyword(s):  
Deep Brain Stimulation ◽  
Brain Stimulation ◽  
Mean Absolute Error ◽  
Tracking System ◽  
Three Dimensional ◽  
Absolute Error ◽  
Magnetic Tracking ◽  
Magnetic Camera ◽  
Magnetic Resonance Imaging Mri ◽  
Deep Brain

This paper presents a tracking system using magnetometers, possibly integrable in a deep brain stimulation (DBS) electrode. DBS is a treatment for movement disorders where the position of the implant is of prime importance. Positioning challenges during the surgery could be addressed thanks to a magnetic tracking. The system proposed in this paper, complementary to existing procedures, has been designed to bridge preoperative clinical imaging with DBS surgery, allowing the surgeon to increase his/her control on the implantation trajectory. Here the magnetic source required for tracking consists of three coils, and is experimentally mapped. This mapping has been performed with an in-house three-dimensional magnetic camera. The system demonstrates how magnetometers integrated directly at the tip of a DBS electrode, might improve treatment by monitoring the position during and after the surgery. The three-dimensional operation without line of sight has been demonstrated using a reference obtained with magnetic resonance imaging (MRI) of a simplified brain model. We observed experimentally a mean absolute error of 1.35 mm and an Euclidean error of 3.07 mm. Several areas of improvement to target errors below 1 mm are also discussed.

scholarly journals A Review of Deep Learning-Based Contactless Heart Rate Measurement Methods

Sensors ◽  
2021 ◽  
Vol 21 (11) ◽  
pp. 3719
Author(s):  
Aoxin Ni ◽  
Arian Azarang ◽  
Nasser Kehtarnavaz
Keyword(s):  
Heart Rate ◽  
Deep Learning ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Video Camera ◽  
Measurement Methods ◽  
Rate Measurement ◽  
Learning Methods ◽  
The Public ◽  
Heart Rate Measurement

The interest in contactless or remote heart rate measurement has been steadily growing in healthcare and sports applications. Contactless methods involve the utilization of a video camera and image processing algorithms. Recently, deep learning methods have been used to improve the performance of conventional contactless methods for heart rate measurement. After providing a review of the related literature, a comparison of the deep learning methods whose codes are publicly available is conducted in this paper. The public domain UBFC dataset is used to compare the performance of these deep learning methods for heart rate measurement. The results obtained show that the deep learning method PhysNet generates the best heart rate measurement outcome among these methods, with a mean absolute error value of 2.57 beats per minute and a mean square error value of 7.56 beats per minute.

scholarly journals Detection and Severity Evaluation of Combined Rail Defects Using Deep Learning

Vibration ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 341-356
Author(s):  
Jessada Sresakoolchai ◽  
Sakdirat Kaewunruen
Keyword(s):  
Neural Network ◽  
Machine Learning ◽  
Deep Learning ◽  
Mean Absolute Error ◽  
Absolute Error ◽  
Machine Learning Techniques ◽  
Rolling Stock ◽  
Raw Data ◽  
Learning Techniques ◽  
Combined Defects

Various techniques have been developed to detect railway defects. One of the popular techniques is machine learning. This unprecedented study applies deep learning, which is a branch of machine learning techniques, to detect and evaluate the severity of rail combined defects. The combined defects in the study are settlement and dipped joint. Features used to detect and evaluate the severity of combined defects are axle box accelerations simulated using a verified rolling stock dynamic behavior simulation called D-Track. A total of 1650 simulations are run to generate numerical data. Deep learning techniques used in the study are deep neural network (DNN), convolutional neural network (CNN), and recurrent neural network (RNN). Simulated data are used in two ways: simplified data and raw data. Simplified data are used to develop the DNN model, while raw data are used to develop the CNN and RNN model. For simplified data, features are extracted from raw data, which are the weight of rolling stock, the speed of rolling stock, and three peak and bottom accelerations from two wheels of rolling stock. In total, there are 14 features used as simplified data for developing the DNN model. For raw data, time-domain accelerations are used directly to develop the CNN and RNN models without processing and data extraction. Hyperparameter tuning is performed to ensure that the performance of each model is optimized. Grid search is used for performing hyperparameter tuning. To detect the combined defects, the study proposes two approaches. The first approach uses one model to detect settlement and dipped joint, and the second approach uses two models to detect settlement and dipped joint separately. The results show that the CNN models of both approaches provide the same accuracy of 99%, so one model is good enough to detect settlement and dipped joint. To evaluate the severity of the combined defects, the study applies classification and regression concepts. Classification is used to evaluate the severity by categorizing defects into light, medium, and severe classes, and regression is used to estimate the size of defects. From the study, the CNN model is suitable for evaluating dipped joint severity with an accuracy of 84% and mean absolute error (MAE) of 1.25 mm, and the RNN model is suitable for evaluating settlement severity with an accuracy of 99% and mean absolute error (MAE) of 1.58 mm.

Trust and fuzzy inference based cross domain serendipitous item recommendations (TFCDSRS)

2021 ◽  
pp. 1-13
Author(s):  
Richa ◽  
Punam Bedi
Keyword(s):  
Fuzzy Inference ◽  
Mean Absolute Error ◽  
Information Filtering ◽  
Absolute Error ◽  
User Acceptance ◽  
Decision Making Process ◽  
End User ◽  
Cross Domain ◽  
F Measure ◽  
Filtering Approach

Recommender System (RS) is an information filtering approach that helps the overburdened user with information in his decision making process and suggests items which might be interesting to him. While presenting recommendation to the user, accuracy of the presented list is always a concern for the researchers. However, in recent years, the focus has now shifted to include the unexpectedness and novel items in the list along with accuracy of the recommended items. To increase the user acceptance, it is important to provide potentially interesting items which are not so obvious and different from the items that the end user has rated. In this work, we have proposed a model that generates serendipitous item recommendation and also takes care of accuracy as well as the sparsity issues. Literature suggests that there are various components that help to achieve the objective of serendipitous recommendations. In this paper, fuzzy inference based approach is used for the serendipity computation because the definitions of the components overlap. Moreover, to improve the accuracy and sparsity issues in the recommendation process, cross domain and trust based approaches are incorporated. A prototype of the system is developed for the tourism domain and the performance is measured using mean absolute error (MAE), root mean square error (RMSE), unexpectedness, precision, recall and F-measure.

Explanation Plus Prediction—The Logical Focus of Project Management Research

2021 ◽  
pp. 875697282199994
Author(s):  
Joseph F. Hair ◽  
Marko Sarstedt
Keyword(s):  
Project Management ◽  
Statistical Models ◽  
Predictive Power ◽  
Mean Absolute Error ◽  
Explanatory Power ◽  
Absolute Error ◽  
Model Parameters ◽  
Mean Square ◽  
Management Research ◽  
The Mean

Most project management research focuses almost exclusively on explanatory analyses. Evaluation of the explanatory power of statistical models is generally based on F-type statistics and the R 2 metric, followed by an assessment of the model parameters (e.g., beta coefficients) in terms of their significance, size, and direction. However, these measures are not indicative of a model’s predictive power, which is central for deriving managerial recommendations. We recommend that project management researchers routinely use additional metrics, such as the mean absolute error or the root mean square error, to accurately quantify their statistical models’ predictive power.

scholarly journals Analog Ensemble Methods for Improving Satellite-Based Intensity Estimates of Tropical Cyclones

Atmosphere ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 830
Author(s):  
William E. Lewis ◽  
Timothy L. Olander ◽  
Christopher S. Velden ◽  
Christopher Rozoff ◽  
Stefano Alessandrini
Keyword(s):  
North Atlantic ◽  
Mean Absolute Error ◽  
Ensemble Methods ◽  
Absolute Error ◽  
Eastern Pacific ◽  
Intensity Maximum ◽  
The North ◽  
The University ◽  
Meteorological Satellite ◽  
Fold Cross Validation

Accurate, reliable estimates of tropical cyclone (TC) intensity are a crucial element in the warning and forecast process worldwide, and for the better part of 50 years, estimates made from geostationary satellite observations have been indispensable to forecasters for this purpose. One such method, the Advanced Dvorak Technique (ADT), was used to develop analog ensemble (AnEn) techniques that provide more precise estimates of TC intensity with instant access to information on the reliability of the estimate. The resulting methods, ADT-AnEn and ADT-based Error Analog Ensemble (ADTE-AnEn), were trained and tested using seventeen years of historical ADT intensity estimates using k-fold cross-validation with 10 folds. Using only two predictors, ADT-estimated current intensity (maximum wind speed) and TC center latitude, both AnEn techniques produced significant reductions in mean absolute error and bias for all TC intensity classes in the North Atlantic and for most intensity classes in the Eastern Pacific. The ADTE-AnEn performed better for extreme intensities in both basins (significantly so in the Eastern Pacific) and will be incorporated in the University of Wisconsin’s Cooperative Institute for Meteorological Satellite Studies (UW-CIMSS) workflow for further testing during operations in 2021.

Sign in / Sign up

Export Citation Format

Share Document