scholarly journals Comparison of fatigue characteristics of 38ХН3МФА and 40ХН high-tensile-strength steels based on test results

2020 ◽  
Vol 4 (394) ◽  
pp. 63-69
Author(s):  
Semyon D. Knoring ◽  
Victor V. Platonov ◽  
Nikolay G. Popov ◽  
Valery M. Shaposhnikov
Keyword(s):  
Fatigue Strength ◽  
Fresh Water ◽  
Strength Characteristics ◽  
Test Results ◽  
Cyclic Tests ◽  
40Kh Steel ◽  
Notched Specimens ◽  
Steel Grades ◽  
Fatigue Characteristics ◽  
Better Than

Object and purpose of research. The object of work is steel “38ХН3МФА”, planned for use in the propeller shafts manufacture of the lead-ship (project 10510), and less strong steel “40XH”, used in the propeller shafts manufacture for icebreakers of lower ice categories and lower power. The purpose of the study is to compare the fatigue strength of these steel grades. Materials and methods. Investigations of the fatigue strength characteristics of steels were carried out by cyclic tests of flat notched specimens in air and cylindrical specimens in fresh water. Main results. It is shown that lowest fatigue strength results correspond to external cyclic loading of specimens with stress concentrator (notch). But even in these conditions, fatigue strength of 38ХН3МФА steel is better than that of 40XH steel. As for the tests of smooth samples in fresh water, 38ХН3МФА steel also has a clear advantage over 40XH steel. Conclusion. The studies have shown that fatigue strength characteristics of 38ХН3МФА steel in the air and in corrosive environment exceed those of 40XH steel. Environmental sensitivity and stress concentration of 38ХН3МФА steel turned out to be higher than for 40KH steel.

scholarly journals Cyclic Tests of Smooth and Notched Specimens Subjected to Bending and Torsion Taking into Account the Effect of Mean Stress

Materials ◽  
2020 ◽  
Vol 13 (9) ◽  
pp. 2141 ◽  
Author(s):  
Roland Pawliczek ◽  
Dariusz Rozumek
Keyword(s):  
Experimental Data ◽  
Fatigue Life ◽  
Fatigue Tests ◽  
Mean Stress ◽  
Regression Equations ◽  
Allowable Stress ◽  
Cyclic Tests ◽  
Mean Values ◽  
Notched Specimens ◽  
Fatigue Characteristics

The paper contains the results of fatigue tests of smooth and notched specimens made of 10HNAP (S355J2G1W) subjected to proportional cyclic loading with use of mean values stress. The results obtained for specimens under bending, torsion and one combination of bending with torsion for four mean values have been compared. The experimental data have been collected in the tables and shown in the figures with use of various σa(τa)-N fatigue characteristics for which parameters of the regression equations have been determined. The influence of average values on the allowable stress amplitudes and amplitude of moments at the level close to the fatigue limit depending on the angle α determining loading combination and the average stress is also shown. The greatest effect of the notch on fatigue life compared to smooth specimens is observed at symmetrical loads. At unsymmetrical loads with non-zero mean stress, this effect clearly weakens or disappears.

2307 Fatigue Strength Characteristics of Notched Specimens of Commercial Pure Titanium

2007 ◽  
Vol 2007.1 (0) ◽  
pp. 331-332 ◽  
Author(s):  
Takumi FUJII ◽  
Kazunori MORISHIGE ◽  
Shigeru HAMADA ◽  
Hiroshi NOGUCHI
Keyword(s):  
Fatigue Strength ◽  
Pure Titanium ◽  
Strength Characteristics ◽  
Notched Specimens ◽  
Commercial Pure Titanium

scholarly journals A review of fatigue test data on weld toe grinding and weld profiling

2021 ◽  
Author(s):  
Moritz Braun ◽  
Xiru Wang
Keyword(s):  
Fatigue Strength ◽  
Fatigue Test ◽  
Influencing Factors ◽  
Experimental Test ◽  
Welded Joints ◽  
Test Results ◽  
Weld Geometry ◽  
Weld Toe ◽  
Steel Grades ◽  
Current Guidelines

The aim of this paper is to investigate the effects of weld toe grinding and weld profiling on the fatigue strength of welded joints and the main influencing factors. Thus, experimental test results of welds improved by different grinding techniques are reviewed. In total, 445 small- and full-scale fatigue test results of various weld types and steel grades with yield strengths up to 1100 MPa are analysed. The obtained improvements of two FAT classes correspond well with current guidelines; however, a new S–N curve slope of m = 4 is recommended—in line with proposals for other weld geometry improvement techniques.

Implementasi Voip Server Berbasis IPV6 Dengan Raspberry PI

2019 ◽  
Vol 9 (01) ◽  
pp. 47-54
Author(s):  
Rabbai San Arif ◽  
Yuli Fitrisia ◽  
Agus Urip Ari Wibowo
Keyword(s):  
Internet Protocol ◽  
Wireless Transmission ◽  
Raspberry Pi ◽  
Test Results ◽  
Average Delay ◽  
Ipv6 Network ◽  
Ip Network ◽  
Selection Of ◽  
Better Than

Voice over Internet Protocol (VoIP) is a telecommunications technology that is able to pass the communication service in Internet Protocol networks so as to allow communicating between users in an IP network. However VoIP technology still has weakness in the Quality of Service (QoS). VOPI weaknesses is affected by the selection of the physical servers used. In this research, VoIP is configured on Linux operating system with Asterisk as VoIP application server and integrated on a Raspberry Pi by using wired and wireless network as the transmission medium. Because of depletion of IPv4 capacity that can be used on the network, it needs to be applied to VoIP system using the IPv6 network protocol with supports devices. The test results by using a wired transmission medium that has obtained are the average delay is 117.851 ms, jitter is 5.796 ms, packet loss is 0.38%, throughput is 962.861 kbps, 8.33% of CPU usage and 59.33% of memory usage. The analysis shows that the wired transmission media is better than the wireless transmission media and wireless-wired.

Kemampuan Komunikasi Matematika: Studi Komparasi Pembelajaran Number Head Together (NHT) dan Media Power Point (PPT)

2020 ◽  
Vol 3 (1) ◽  
pp. 39-50
Author(s):  
Bernadeta Ritawati ◽  
Sri Wahyuni
Keyword(s):  
Communication Skills ◽  
Hypothesis Test ◽  
Test Results ◽  
Mathematical Communication ◽  
Cluster Technique ◽  
Significance Level ◽  
Quasi Experimental ◽  
Power Point ◽  
Media Power ◽  
Better Than

This research is a quasi-experimental study that aims to determine the comparison of students' mathematical communication abilities with the cooperative learning model of the NHT and PPT media in class VII SMP Negeri 02 Ngabang. The population in this study were all students of class VII SMP 02 Ngabang consisting of 3 classes. The sample in this study was taken by using the Random Sampling Cluster technique. Class VII A as class I experimental class with 24 students and class VII B as a experimental class II with 24 students. The instruments used were pretest and posttest in the form of description. Data analysis uses the t test with a significance level of 5%. The results showed the average posttest for the NHT class was 72.5 and the average posttest for the PP class was 66.666. From the posttest hypothesis test results obtained t hitung> t tabel (1.9522> 1,667). Because t_hitung> t_tabel, H_0 is rejected and H_a is accepted. This means that students' mathematical communication skills taught with the NHT are better than using Power point media.

scholarly journals Evaluation of the Feasibility of NaCaPO4-Blended Zirconia as a New CAD/CAM Material for Dental Restoration

Materials ◽  
2021 ◽  
Vol 14 (14) ◽  
pp. 3819
Author(s):  
Ting-Hsun Lan ◽  
Yu-Feng Chen ◽  
Yen-Yun Wang ◽  
Mitch M. C. Chou
Keyword(s):  
Computer Aided Design ◽  
Optical Microscope ◽  
Dental Restoration ◽  
Numerical Control ◽  
Test Results ◽  
Cnc Machine ◽  
Computer Aided ◽  
Cad Cam ◽  
Aided Design ◽  
Better Than

The computer-aided design/computer-aided manufacturing (CAD/CAM) fabrication technique has become one of the hottest topics in the dental field. This technology can be applied to fixed partial dentures, removable dentures, and implant prostheses. This study aimed to evaluate the feasibility of NaCaPO4-blended zirconia as a new CAD/CAM material. Eleven different proportional samples of zirconia and NaCaPO4 (xZyN) were prepared and characterized by X-ray diffractometry (XRD) and Vickers microhardness, and the milling property of these new samples was tested via a digital optical microscope. After calcination at 950 °C for 4 h, XRD results showed that the intensity of tetragonal ZrO2 gradually decreased with an increase in the content of NaCaPO4. Furthermore, with the increase in NaCaPO4 content, the sintering became more obvious, which improved the densification of the sintered body and reduced its porosity. Specimens went through milling by a computer numerical control (CNC) machine, and the marginal integrity revealed that being sintered at 1350 °C was better than being sintered at 950 °C. Moreover, 7Z3N showed better marginal fit than that of 6Z4N among thirty-six samples when sintered at 1350 °C (p < 0.05). The milling test results revealed that 7Z3N could be a new CAD/CAM material for dental restoration use in the future.

scholarly journals Multiaxial Fatigue Strength to Notched specimens made of 40CrMoV13.9

2016 ◽  
Vol 9 (4) ◽  
pp. 1269-1291 ◽  
Author(s):  
Filippo Berto ◽  
Abedin Gagani ◽  
Raffaella Aversa ◽  
Relly Victoria V. Petrescu ◽  
Antonio Apicella ◽  
...  
Keyword(s):  
Fatigue Strength ◽  
Multiaxial Fatigue ◽  
Notched Specimens

Influence of Collagen Status on Microstructures of Porous Collagen/TCP Composites

2007 ◽  
Vol 330-332 ◽  
pp. 495-498
Author(s):  
Chao Zou ◽  
Wen Jian Weng ◽  
Xu Liang Deng ◽  
Kui Cheng ◽  
Pi Yi Du ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Growth ◽  
Tricalcium Phosphate ◽  
Freeze Drying ◽  
Alkali Treatment ◽  
Test Results ◽  
Collagen Matrices ◽  
The Difference ◽  
Porous Composites ◽  
Better Than

Two starting collagens, sponge and floc collagen, were used to prepare collagen/tricalcium phosphate (TCP) composites. The resulting composites were porous and had 200μm pore size. However, there was a difference in the microstructure of the pore walls for the composites derived from the two collagens, the pore walls in sponge collagen/TCP composite were still porous and had 200 nm micropores size, TCP particles were trapped in collagen matrices. While floc collagen/TCP composite had smooth and dense walls in which TCP particles were embedded. The difference could be attributed to the starting collagen with different status. Sponge collagen has a soft structure, which easily becomes disassembled fibrils during alkali treatment, the disassembled fibrils are integrated again to form a dense morphology for pore walls after freeze-drying. While floc collagen has already a low disassembly degree, the alkali treatment could not be able to separate the fibrils, this remains as micropores in pore walls after freeze-drying. Both porous composites are significant in bone tissue engineering or regeneration. MTT test results showed the two composites had good cytocompatibility, and sponge collagen/TCP composite was somewhat better than floc collagen/TCP composite, which could result from that micropores derived roughness in pore walls of sponge collagen/TCP composite is suitable for cell growth.

Sign in / Sign up

Export Citation Format

Share Document