Impact Resistance and Specific Energy Absorption Efficiency Limits of Periodic Cellular Solids

2022 ◽  
Author(s):  
Autumn R. Bernard ◽  
Mostafa S. ElSayed
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Impact Resistance ◽  
Absorption Efficiency ◽  
Cellular Solids ◽  
Specific Energy Absorption ◽  
Energy Absorption Efficiency

Cushioning energy absorption of composite layered structures including paper corrugation, paper honeycomb and expandable polyethylene

2019 ◽  
Vol 54 (3) ◽  
pp. 176-191 ◽  
Author(s):  
Yanfeng Guo ◽  
Meijuan Ji ◽  
Yungang Fu ◽  
Dan Pan ◽  
Xingning Wang ◽  
...  
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Peak Stress ◽  
Layered Structures ◽  
Absorption Efficiency ◽  
Compression Stress ◽  
Static Compression ◽  
Specific Energy Absorption ◽  
Energy Absorption Efficiency ◽  
Paper Honeycomb

The composite layered structures including paper corrugation, paper honeycomb and expandable polyethylene are innovative structures of cushioning energy absorption, and the compression and impact resistances of the expandable polyethylene can be enhanced by laminating the corrugated paperboard or honeycomb paperboard. This article evaluated the compression performance and cushioning energy absorption of the composite layered structures by the static compression and drop impact compression tests. On one hand, the static compression properties showed that the total energy absorption, energy absorption per unit volume and stroke efficiency of the composite layered structures were all higher than those of expandable polyethylene. The specific energy absorption was enhanced with the increase in compression strain but almost not affected by the compression rate. The specific energy absorption of the composite layered structures including the expandable polyethylene and honeycomb paperboard was greater than those of the expandable polyethylene and corrugated paperboard. The energy absorption efficiency of the composite layered structures including the expandable polyethylene and corrugated paperboard was large for the low compression stress level, yet that of the composite layered structures including the expandable polyethylene and honeycomb paperboard was large for the high compression stress level. On the other hand, the dynamic compression characteristics showed that the peak stress, energy absorption per unit area, energy absorption per unit volume and specific energy absorption of the composite layered structures embodying paper sandwich cores and expandable polyethylene had linear increasing trends with the increase of drop shock energy. At the same drop impact condition, the composite layered structures including the honeycomb paperboard and expandable polyethylene had better cushioning energy absorption, the peak stress decreased by 23.6% on average, the energy absorption efficiency raised by 8.85% on average and the specific energy absorption increased by 18.1% on average than those including the corrugated paperboard and expandable polyethylene. Therefore, the corrugated paperboard and honeycomb paperboard can helpfully improve the cushioning energy absorption of the expandable polyethylene, and the composite layered structures embodying the expandable polyethylene, corrugated paperboard and honeycomb paperboard may hold excellent packaging protection.

ENERGY ABSORPTION EFFICIENCY IN CELLULAR SOLIDS

2008 ◽  
Vol 22 (09n11) ◽  
pp. 1730-1735 ◽  
Author(s):  
KUNIHARU USHIJIMA ◽  
DAI-HENG CHEN ◽  
HIRONOBU NISITANI
Keyword(s):  
Energy Absorption ◽  
Honeycomb Structure ◽  
Absorption Efficiency ◽  
Absorption Capacity ◽  
Cellular Solids ◽  
Absorbed Energy ◽  
Energy Absorption Capacity ◽  
Geometrical Properties ◽  
Energy Absorption Efficiency ◽  
New Type

In this paper, a new type of honeycomb structure is proposed to enhance the energy absorption capacity for a honeycomb structure, and investigated its energy absorption efficiency (absorbed energy per unit volume) by finite element method (FEM). This model has small arc-shaped parts on the double cell wall, and can be manufactured by a similar way of standard honeycomb structures. Also, the proposed structure has large rigidity of plastic bending without increasing the mass. In this paper, effects of geometrical properties on the energy absorption characteristics are discussed.

scholarly journals Investigation and Statistical Evaluation of Reinforced Aluminum Foams

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 315
Author(s):  
Ivana Bunjan ◽  
Krešimir Grilec ◽  
Danko Ćorić
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Steel Wire ◽  
Matrix Material ◽  
Absorption Efficiency ◽  
Compression Tests ◽  
Aluminum Foams ◽  
Specific Energy Absorption ◽  
Steel Mesh ◽  
Semi Solid

In this study, aluminum foams reinforced with different steel elements were produced by the AluLight process. The master alloy AlMgSi0.6 was used as the matrix material, titanium hydride (TiH2) powder was used as a foaming agent, and steel wire, cylindrical steel mesh and flat steel mesh were used as reinforcing elements. Reinforcements were placed inside the mold, along with the precursors, and samples were manufactured by gas releasing particles in a semi-solid state. To examine the effect of the reinforcements on specific energy absorption, quasi-static uniaxial compression tests were carried out, with a constant separation rate of 1 mm/s. From the tested results, the energy absorption per unit volume and specific energy absorption efficiency were calculated and then also statistically evaluated. The results showed that examined shapes of reinforcements affect differently specific energy absorption and its efficiency, compared to non-reinforced aluminum foams. The best result obtained was with cylindrically shaped steel mesh.

Dynamic Axial Compression of Square CFRP/Aluminium Tubes

2019 ◽  
Vol 794 ◽  
pp. 202-207
Author(s):  
Rafea Dakhil Hussein ◽  
Dong Ruan ◽  
Guo Xing Lu ◽  
Jeong Whan Yoon ◽  
Zhan Yuan Gao
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Fibre Composite ◽  
Dynamic Tests ◽  
Carbon Fibre Composite ◽  
Specific Energy Absorption ◽  
Static Tests ◽  
Crushing Force ◽  
Cfrp Tubes ◽  
The Impact

Carbon fibre composite tubes have high strength to weight ratios and outstanding performance under axial crushing. In this paper, square CFRP tubes and aluminium sheet-wrapped CFRP tubes were impacted by a drop mass to investigate the effect of loading velocity on the energy absorption of CFRP/aluminium tubes. A comparison of the quasi-static and dynamic crushing behaviours of tubes was made in terms of deformation mode, peak crushing force, mean crushing force, energy absorption and specific energy absorption. The influence of the number of aluminium layers that wrapped square CFRP tubes on the crushing performance of tubes under axial impact was also examined. Experimental results manifested similar deformation modes of tubes in both quasi-static and dynamic tests. The dynamic peak crushing force was higher than the quasi-static counterpart, while mean crushing force, energy absorption and specific energy absorption were lower in dynamic tests than those in quasi-static tests. The mean crushing force and energy absorption decreased with the crushing velocity and increased with the number of aluminium layers. The impact stroke (when the force starts to drop) decreased with the number of aluminium layers.

Energy Absorption of Origami Crash Box: Numerical Simulation and Theoretical Analysis

2018 ◽  
Author(s):  
Mengyan Shi ◽  
Jiayao Ma ◽  
Yan Chen ◽  
Zhong You
Keyword(s):  
Energy Absorption ◽  
Theoretical Study ◽  
Low Cost ◽  
Deformation Mode ◽  
Absorption Efficiency ◽  
Great Promise ◽  
Good Match ◽  
Energy Absorption Efficiency ◽  
Thin Walled ◽  
Initial Peak

Thin-walled tubes as energy absorption devices are widely in use for their low cost and high manufacturability. Employing origami technique on a tube enables induction of a predetermined failure mode so as to improve its energy absorption efficiency. Here we study the energy absorption of a hexagonal tubular device named the origami crash box numerically and theoretically. Numerical simulations of the quasi-static axial crushing show that the pattern triggers a diamond-shaped mode, leading to a substantial increase in energy absorption and reduction in initial peak force. The effects of geometric parameters on the performance of the origami crash box are also investigated through a parametric study. Furthermore, a theoretical study on the deformation mode and energy absorption of the origami crash box is carried out, and a good match with numerical results is obtained. The origami crash box shows great promise in the design of energy absorption devices.

Bending Behavior of Simply-Supported Sandwich Beams Subjected to Large Deflection

2018 ◽  
Vol 777 ◽  
pp. 569-574
Author(s):  
Zhong You Xie
Keyword(s):  
Energy Absorption ◽  
Large Deflection ◽  
Absorption Efficiency ◽  
Sandwich Beams ◽  
Element Simulation ◽  
Energy Absorption Efficiency ◽  
Load Carrying ◽  
Absorption Performance ◽  
Bending Behavior ◽  
The Moment

Due to thin skins and soft core, it is apt to local indentation inducing the concurrence of geometrical and material nonlinearity in sandwich structures. In the paper, finite element simulation is used to investigate the bending behavior of lightweight sandwich beams under large deflection. A modified formulation for the moment at mid-span section of sandwich beams under large deflection is presented, and energy absorption performance is assessed based on energy absorption efficiency. In addition, it is found that no local indentation arises initially, while later that increases gradually with loading displacement increasing. The height of the mid-span section as well as load-carrying capacity decreases significantly with local indentation depth increasing.

Compressive Properties of Electroless Ni-P Coating Reinforced Magnesium Alloy Foams

2021 ◽  
Vol 889 ◽  
pp. 123-128
Author(s):  
Sheng Jun Liu ◽  
Zhi Qiang Dong ◽  
Ren Zhong Cao ◽  
Da Song ◽  
Jia An Liu ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Energy Absorption ◽  
Absorption Efficiency ◽  
Absorption Capacity ◽  
Compressive Properties ◽  
Compressive Test ◽  
Energy Absorption Capacity ◽  
Energy Absorption Efficiency ◽  
Hybrid Foams ◽  
Electroless Ni

In this study, the open-cell Mg-2Zn-0.4Y foams were prepared by infiltration casting method. The Ni/Mg hybrid foams were prepared by electroless Ni-P coating on the foam struts to improve the compressive strength and energy absorption capacity. The compressive properties of the Mg alloy foams and Ni/Mg hybrid foams were studied by quasi-static compressive test. The experimental results show that the Ni-P coating is composed of crystallites. The Ni-P coating can significantly enhance the compressive strength, energy absorption capacity and energy absorption efficiency of the foams.

Ballistic Performance Evaluation of Kevlar-Glass Fibre Hybrid Composite Laminate against Medium Velocity Impact

2021 ◽  
Vol 1165 ◽  
pp. 47-64
Author(s):  
Saurabh S. Kumar ◽  
Rajesh G. Babu ◽  
U. Magarajan
Keyword(s):  
Energy Absorption ◽  
Specific Energy ◽  
Glass Fibre ◽  
Hybrid Composite ◽  
Composite Laminates ◽  
Areal Density ◽  
Ballistic Performance ◽  
Performance Requirement ◽  
Specific Energy Absorption ◽  
Fabric Composite

In this paper, the post ballistic impact behaviour of kevlar-glass fibre hybrid composite laminates was investigated against 9×19 mm projectile. Eight different types of composite laminates with different ratios of kevlar woven fibre to glass fibre were fabricated using hand lay-up with epoxy matrix. Ballistic behaviour like ballistic Limit (V50), energy absorption, specific energy absorption and Back Face Signature (BFS) were studied after bullet impact. The results indicated that as the Percentage of glass fibre is increased there was a linear increment in the ballistic behaviour. Addition of 16% kevlar fabric, composite sample meets the performance requirement of NIJ0101.06 Level III-A. Since the maximum specific energy absorption was observed in Pure Kevlar samples and the adding of glass fibre increases the weight and Areal Density of the sample, further investigations need to be carried out to utilize the potential of glass fibre for ballistic applications.

Sign in / Sign up

Export Citation Format

Share Document