scholarly journals Rapid Removal of Fluoride from Water Using Core@shell and @Shell Nanoparticles of SiO2@ZrO2 and @ZrO2. Investigation of the Mechanisms Involved and Impact of Elemental Leaching

2021 ◽  
Author(s):  
Maisuls Iván ◽  
Yolanda Castro Martin ◽  
Alicia Duran ◽  
Dominic Lariviere ◽  
Pablo Arnal
Keyword(s):  
Zirconium Oxide ◽  
Colloidal Particles ◽  
Fluoride Concentration ◽  
Cross Product ◽  
Fluoride Removal ◽  
Shell Nanoparticles ◽  
Solubility In Water ◽  
Batch Systems ◽  
Rapid Removal ◽  
The Impact

<p>Fluoride is a natural contaminant of water ⁠that endangers many people worldwide when present in concentrations higher than 2 ppm. Here, fluoride removal by four different nanostructured colloidal particles (SiO<sub>2</sub>@ZrO<sub>2</sub><sup>nc</sup>, SiO<sub>2</sub>@ZrO<sub>2</sub><sup>c</sup>, @ZrO<sub>2</sub><sup>nc</sup>, and @ZrO<sub>2</sub><sup>c</sup>) was measured in batch systems within a period of 24 h. Surprisingly, these materials removed fluoride from the water solutions and reached equilibrium in less than 10 minutes. The combination of high specific surface and fast fluoride removal placed these materials among the top materials currently known in fluoride removal. Also, the impact of element leaching was measured and quantified. The influence of time, pH, and fluoride concentration on leaching of Zr and Si was evaluated with a response surface methodology. Leaching of Zr and Si continued for several hours and depended on first-order, quadratic and cross-product coefficients. Previous studies of fluoride removal with zirconium oxide often assumed that a decrease in fluoride concentration in the solution indicated that fluoride was bound to the surface of the oxide. Zirconium oxide's solubility in water is low, but not zero. Hence, Zr might have formed soluble fluorocomplexes. This is the first report of fluoride removal with zirconium oxide that studied the leaching of the solid to exclude the formation of soluble fluorocomplexes.</p>

scholarly journals Rapid Removal of Fluoride from Water Using Core@shell and @Shell Nanoparticles of SiO2@ZrO2 and @ZrO2. Investigation of the Mechanisms Involved and Impact of Elemental Leaching

2021 ◽  
Author(s):  
Maisuls Iván ◽  
Yolanda Castro Martin ◽  
Alicia Duran ◽  
Dominic Lariviere ◽  
Pablo Arnal
Keyword(s):  
Zirconium Oxide ◽  
Colloidal Particles ◽  
Fluoride Concentration ◽  
Cross Product ◽  
Fluoride Removal ◽  
Shell Nanoparticles ◽  
Solubility In Water ◽  
Batch Systems ◽  
Rapid Removal ◽  
The Impact

<p>Fluoride is a natural contaminant of water ⁠that endangers many people worldwide when present in concentrations higher than 2 ppm. Here, fluoride removal by four different nanostructured colloidal particles (SiO<sub>2</sub>@ZrO<sub>2</sub><sup>nc</sup>, SiO<sub>2</sub>@ZrO<sub>2</sub><sup>c</sup>, @ZrO<sub>2</sub><sup>nc</sup>, and @ZrO<sub>2</sub><sup>c</sup>) was measured in batch systems within a period of 24 h. Surprisingly, these materials removed fluoride from the water solutions and reached equilibrium in less than 10 minutes. The combination of high specific surface and fast fluoride removal placed these materials among the top materials currently known in fluoride removal. Also, the impact of element leaching was measured and quantified. The influence of time, pH, and fluoride concentration on leaching of Zr and Si was evaluated with a response surface methodology. Leaching of Zr and Si continued for several hours and depended on first-order, quadratic and cross-product coefficients. Previous studies of fluoride removal with zirconium oxide often assumed that a decrease in fluoride concentration in the solution indicated that fluoride was bound to the surface of the oxide. Zirconium oxide's solubility in water is low, but not zero. Hence, Zr might have formed soluble fluorocomplexes. This is the first report of fluoride removal with zirconium oxide that studied the leaching of the solid to exclude the formation of soluble fluorocomplexes.</p>

scholarly journals Use of Aluminium Metal Embedded ThujaOccidentalis Leaves Carbon (AMETLC) for Fluoride Removal from Water: Equilibrium and Kinetic Studies

2021 ◽  
Vol 9 (2) ◽  
pp. 480-490
Keyword(s):  
Free Energy ◽  
Cost Estimation ◽  
Research Work ◽  
Fluoride Concentration ◽  
Standard Free Energy ◽  
Negative Ions ◽  
Fluoride Removal ◽  
Maximum Adsorption Capacity ◽  
Order Kinetic ◽  
The Impact

In this research work, Aluminum metal embedded Thuja Occidentalis leaves carbon (AMETLC) is used an adsorbent for the removal of fluoride from water. On batch technique, under key factors like pH, the dosage of adsorbent, variation of fluoride concentration and contact time, 92% of fluoride removal is observed at room temperature under optimum experimental conditions with an adsorbent particle size of <75 µm. The impact of existing negative ions on percentage removal of fluoride is studied, and it is noticed in the direction of PO43- > HCO3-> SO42- > NO3- > Cl-. The adsorbent is characterized by using FTIR, SEM, EDX, and XRD techniques. Experimental data reveal that the Langmuir isotherm model(maximum adsorption capacity obtained is 0.625 mg g-1) provided the best correlation (R2 = 0.988) and is well fit followed by pseudo-second-order kinetic model represents mono-layered, and chemisorptions are the rate-determining step for fluoride adsorption. Thermodynamic studies reveals better adsorption is attained at lower temperatures. The standard free energy (ΔH0) is observed as negative and the negative value of standard free energy (ΔH0) represents that the adsorption process is exothermic. Moreover, desorption study reveals that fluoride leaching takes place at a pH 13.0. In addition, succinct cost estimation was done for the AMETLC which offered one of the best alternatives for the removal of fluoride. The application of AMETLC is helpful to decrease the fluoride concentration in groundwater samples to meet the permissible limit according to BIS-2012 standards.

Ultrastructure of Lymphatic Capillaries in the Transport of Colloidal Particles

1967 ◽  
Vol 25 ◽  
pp. 186-187
Author(s):  
L. V. Leak ◽  
J. F. Burke
Keyword(s):  
Connective Tissue ◽  
Colloidal Particles ◽  
Ultrastructural Level ◽  
Vital Role ◽  
Time Intervals ◽  
Thorium Dioxide ◽  
Lymphatic Capillary ◽  
Tissue Area ◽  
Rapid Removal ◽  
Tissue Fluids

The vital role played by the lymphatic capillaries in the transfer of tissue fluids and particulate materials from the connective tissue area can be demonstrated by the rapid removal of injected vital dyes into the tissue areas. In order to ascertain the mechanisms involved in the transfer of substances from the connective tissue area at the ultrastructural level, we have injected colloidal particles of varying sizes which range from 80 A up to 900-mμ. These colloidal particles (colloidal ferritin 80-100A, thorium dioxide 100-200 A, biological carbon 200-300 and latex spheres 900-mμ) are injected directly into the interstitial spaces of the connective tissue with glass micro-needles mounted in a modified Chambers micromanipulator. The progress of the particles from the interstitial space into the lymphatic capillary lumen is followed by observing tissues from animals (skin of the guinea pig ear) that were injected at various time intervals ranging from 5 minutes up to 6 months.

Effects of operational parameters on defluoridation efficiency using electrocoagulation process

2011 ◽  
Vol 6 (1) ◽  
Author(s):  
M. Behbahani ◽  
M.R. Alavi Moghaddam ◽  
M. Arami
Keyword(s):  
Reaction Time ◽  
Anode Material ◽  
Removal Efficiency ◽  
Fluoride Concentration ◽  
Fluoride Removal ◽  
Operational Parameters ◽  
Applied Current ◽  
Initial Ph ◽  
Electrocoagulation Process ◽  
Electrode Connection

The aim of this study is to examine the effect of operational parameters on fluoride removal using electrocoagulation method. For this purpose, various operational parameters including initial pH, initial fluoride concentration, applied current, reaction time, electrode connection mode, anode material, electrolyte salt, electrolyte concentration, number of electrodes and interelectrode distance were investigated. The highest defluoridation efficiency achieved at initial pH 6. In the case of initial fluoride concentration, maximum removal efficiency (98.5%) obtained at concentration of 25mg/l. The increase of applied current and reaction time improved defluoridation efficiency up to 99%. The difference of fluoride removal efficiencies between monopolar and bipolar series and monopolar parallel were significant, especially at reaction time of 5 min. When aluminum used as anode material, higher removal efficiency (98.5%) achieved compared to that of iron anode (67.7%). The best electrolyte salt was NaCl with the maximum defluoridation efficiency of 98.5% compared to KNO3 and Na2SO4. The increase of NaCl had no effect on defluoridation efficiency. Number of electrodes had little effect on the amounts of Al3+ ions released in the solution and as a result defluoridation efficiency. Almost the same fluoride removal efficiency obtained for different interelectrode distances.

scholarly journals Characterisation of smectite-rich clay soil: Implication for groundwater defluoridation

2016 ◽  
Vol Volume 112 (Number 11/12) ◽  
Author(s):  
Rabelani Mudzielwana ◽  
Mugera W. Gitari ◽  
Titus A.M. Msagati ◽  
◽  
◽  
...  
Keyword(s):  
South Africa ◽  
Rural Areas ◽  
Contact Time ◽  
Clay Soil ◽  
Dental Fluorosis ◽  
Fluoride Concentration ◽  
Limpopo Province ◽  
World Health ◽  
Fluoride Removal ◽  
X Ray

Abstract Groundwater is a widely used and affordable source of drinking water in most of the rural areas of South Africa. Several studies have indicated that groundwater in some boreholes in South Africa has a fluoride concentration above the level recommended by the World Health Organization (1.5 mg/L). Fluoride concentrations above the permissible limit (>1.5 mg/L) lead to dental fluorosis, with even higher concentrations leading to skeletal fluorosis. In the present work, we evaluate the application of smectite-rich clay soil from Mukondeni (Limpopo Province, South Africa) in defluoridation of groundwater. The clay soil was characterised by mineralogy using X-ray diffraction, by elemental composition using X-ray fluorescence and by morphology using scanning electron microscopy. Surface area and pore volume was determined by the Brunauer–Emmett–Teller surface analysis method. Cation exchange capacity and pHpzc of the soil were also evaluated using standard laboratory methods. Batch experiments were conducted to evaluate and optimise various operational parameters such as contact time, adsorbent dose, pH and initial adsorbate concentration. It was observed that 0.8 g/100 mL of smectite-rich clay soil removed up to 92% of fluoride from the initial concentration of 3 mg/L at a pH of 2 with a contact time of 30 min. The experimental data fitted well to a Langmuir adsorption isotherm and followed pseudo second order reaction kinetics. Smectite-rich clay soil showed 52% fluoride removal from field groundwater with an initial fluoride concentration of 5.4 mg/L at an initial pH of 2 and 44% removal at a natural pH of 7.8. Therefore smectite-rich clay soil from Mukondeni has potential for application in defluoridation of groundwater. Chemical modification is recommended to improve the defluoridation capacity.

scholarly journals Biosorption of Fluoride from Synthetic and Ground Water Using Chlorella vulgaris Immobilized in Calcium Alginate Beads in an Upflow Packed Bed Column

2017 ◽  
Vol 61 (3) ◽  
pp. 188 ◽  
Author(s):  
Poornima G. Hiremath ◽  
Thomas Theodore
Keyword(s):  
Experimental Data ◽  
Ground Water ◽  
Chlorella Vulgaris ◽  
Water Samples ◽  
Packed Column ◽  
Fluoride Concentration ◽  
Fixed Bed ◽  
Fluoride Removal ◽  
Fluoride Ions ◽  
Fluoride Adsorption

The potential of immobilized Chlorella vulgaris to remove fluoride from synthetic and real ground water samples in a fixed bed was investigated. The effect of important kinetic parameters including column bed height, feed flow rate and influent fluoride concentration of solution on fluoride removal was studied. Thomas, Yoon-Nelson, and BDST models were used to analyze the experimental data and understand the influence on biosorption performance. The models’ predictions were in good agreement with the experimental data for all the process parameters studied, indicating that the models were suitable for fixed-bed column design. Fluoride adsorption was reversible. Desorption of fluoride ions was accomplished by pumping 0.1 N HCl solution. The reusability of adsorbent was studied by subjecting column to repeated cycles of fluoride adsorption and desorption. The suitability of immobilized C. vulgaris adsorbent for fluoride removal from ground water samples of Pavagada taluk, Tumakuru district was studied in the packed column.

scholarly journals Column Efficiency of Fluoride Removal Using Quaternized Palm Kernel Shell (QPKS)

2019 ◽  
Vol 2019 ◽  
pp. 1-13 ◽  
Author(s):  
Ayu Haslija Abu Bakar ◽  
Luqman Chuah Abdullah ◽  
Nur Amirah Mohd Zahri ◽  
Ma’an Alkhatib
Keyword(s):  
Fluoride Concentration ◽  
Fixed Bed ◽  
Palm Kernel ◽  
Fluoride Removal ◽  
Trimethylammonium Chloride ◽  
Transfer Resistance ◽  
Adsorption Models ◽  
Palm Kernel Shell ◽  
Bed Height ◽  
Fixed Bed Adsorption

In this research, the adsorption potential of quaternized palm kernel shell (QPKS) to remove F− from aqueous solution was investigated using fixed-bed adsorption column. Raw palm kernel shell waste was reacted with 3-chloro-2-hydroxypropyl trimethylammonium chloride (CHMAC) in order to modify the surface charge. The effects of inlet F− concentrations (2–12 mg/l) and QPKS bed height (2–10 cm) with optimum pH (pH = 3) on the breakthrough characteristics of the adsorption system were determined. In the fixed-bed column, breakthrough time increases with increasing bed height due to increasing amount of active site on adsorbents to adsorb the fluoride ion. Decreasing trend of breakthrough values was obtained with increasing initial fluoride concentration due to greater driving force for the transfer process to overcome the mass transfer resistance in the column. The adsorptions were fitted to three well-established fixed-bed adsorption models, namely, Thomas, Yoon–Nelson, and Adams–Bohart models. The results fitted well to the Thomas and Yoon–Nelson models with correlation coefficient, R2 ≥ 0.96.

scholarly journals Fluoride removal using electrocoagulation technique

2021 ◽  
Vol 877 (1) ◽  
pp. 012047
Author(s):  
Hind M. Ewadh ◽  
Mustafa J. Al Imari ◽  
Sabrean F. Jawad ◽  
Hayfaa A. Mubarak
Keyword(s):  
Severe Disease ◽  
Electrical Current ◽  
Electrode Spacing ◽  
Polluted Water ◽  
Fluoride Removal ◽  
Acidic Environment ◽  
Current Electrode ◽  
The Past ◽  
The Impact ◽  
A Current

Abstract A modest quantity of fluoride can increase the mineralization of teeth and reduce their cavities. But the presomerence of fluoride in excess in water can lead to severe disease infertility. In the past few decades, scientists have thus been preoccupied with developing ways to reduce sewage fluoride concentrations and reduce their effects on human health. The present study is aimed at using the technology of electrocoagulation to remove fluoride from polluted water. Tests have been done to examine the elimination of fluoride with a rectangular electrocoagulation cell and examine the impact of the experimental aspects on fluoride extraction, specifically electrical current, electrode spacing, and pH. The authors found that 93% of the fluoride has been extracted using 5mm spaced electrodes with a current density of 2 mA/cm2 and a level of pH of 7 from the polluted water after 20 min of processing. Experimental factors considerably impact the efficacy of fluoride removal. In the acidic environment, greater effectiveness of fluoride removal is being attained. The elimination effectiveness depends directly on the electric current, whereas the distance between poles is adversely linked to fluoride elimination.

Regeneration Effect of Fluoride-Rich Granular Activated Alumina on Desorption Regent NaOH Solution

2013 ◽  
Vol 316-317 ◽  
pp. 653-656
Author(s):  
Bai Jie Niu ◽  
Wen Ming Ding ◽  
Dan Dang
Keyword(s):  
Adsorption Capacity ◽  
Sodium Hydroxide Solution ◽  
Fluoride Concentration ◽  
Column Experiment ◽  
Fluoride Removal ◽  
Activated Alumina ◽  
Optimal Method ◽  
Column Adsorption ◽  
Naoh Solution ◽  
Regeneration Effect

As an effective adsorbent, granular activated alumina (GAA) has been widely used in defluoridation. In order to reduce cost and operate environment-friendly, the adsorbent should be regenerated. In this paper, column experiment was done to characterize the fluoride removal properties and to develop an optimal method to regenerate fluoride-rich modified activated alumina (MGAA). The MGAA can be regenerated by utilizing sodium hydroxide solution desorption, deionized water washing and ferric sulfate reactivation and then used for futher defluoride operation. The influence of the concentration of desorption agent (NaOH solution) and desorbing time on desorption rate and the adsorption capacity of regenerated MGAA were studied. The optimal desorption condition was: 1% NaOH solution for desorption agent, desorbing time in 1.5h.In addition, when the regenerated MGAA was used again for column adsorption test, its adsorption capacity reached 94% of that of original sorbent in 1mg/L outlet fluoride concentration.

The Coarse Particle Influence on the Strength of Wax Deposition

2020 ◽  
Author(s):  
Xun Zhang ◽  
Qiyu Huang ◽  
Yu Zhang ◽  
Yaping Li ◽  
Xin Liu
Keyword(s):  
Yield Stress ◽  
Colloidal Particles ◽  
Critical Mass ◽  
Solid Particles ◽  
Coarse Particle ◽  
Silica Sand ◽  
Coarse Particles ◽  
Wax Deposition ◽  
Wax Deposits ◽  
The Impact

Abstract Wax deposition has always been an essential issue for flow assurance, especially in subsea pipelines. The coarse particles, which are usually measured in millimeters, will be carried out by oil flow during the deep-water oil fields production. However, due to insufficient understanding of the structure of wax deposits and the complexity of sandy crude oil deposition, the interaction between coarse particles and wax deposits in the pipeline have rarely been investigated. In this paper, the effect of coarse particles on the yield stress of wax deposits has been studied. The sample was mixed at reversible structure temperature so that the impact of shear history could be eliminated, and the rapid particle settlement at high temperature could be avoided. Experimental results have found that there is a critical fraction in coarse particle influences, below which a small number of coarse particles added will lead to a slight increase in bulk yield stress. On the contrary, a dramatic decrease in yield stress when exceeding the critical mass fraction and increasingly marked enhancement of yield stress as the fraction increases. This phenomenon has been explicated microscopically by the structural interaction between coarse particles and wax deposits. The interlock between wax crystals is the major contribution of the structure as the less particle fraction contains. Even though the silica sand is a typical non-colloidal particle, the asphaltene and resin could be absorbed on the surface of particles and forming a cluster of colloidal particles. As the fraction of particles slightly increased, the slip between colloidal particles and wax crystal interlock accelerates structural failure. Nevertheless, more particles involved the overall yield stress may depend on the friction and the adhesive force between solid particles. The subtle changes induced by coarse particles would have a harder deposit, which can hinder pig passing and affect pipeline pigging operations.

Sign in / Sign up

Export Citation Format

Share Document