scholarly journals STUDY ON CO2 SOAKING TIME AND �HUFF AND PUFF� INJECTION CYCLE EFFECT IN TIGHT PERMEABILITY RESERVOIR

2019 ◽  
Vol 42 (1) ◽  
pp. 9-14
Author(s):  
Muslim Abdurrahman ◽  
Fiki H. Ferizal ◽  
Dadan D.S.M. Saputra ◽  
Riri P. Sari
Keyword(s):  
Optimum Condition ◽  
Oil Recovery ◽  
Oil Production ◽  
Oil Field ◽  
Oil Fields ◽  
Viscosity Reduction ◽  
Co2 Injection ◽  
Low Permeability ◽  
Soaking Time ◽  
Injection Cycle

Oil and gas industry is struggling to improve oil production using several methods. CO2 injection is one of the advance proven technology to enhance oil production in numerous oil field in the world. Key parameters during CO2 injection are viscosity reduction and oil swelling which can improve oil production. CO2 injection also has high possibility to be applied in Indonesia's oil fields due to abundant CO2 sources surrounding oil fields. R field is one of reservoir candidates that appropriate for CO2 injection. It has a low pressure and low oil recovery due to low permeability (1-26,2 mD).The CO2 injection technique used in this study was huff and puff that consist of injection, shut in, and production phases. The simulation was conducted using compositional simulator. There were two parameters chosen to be analyzed, which were soaking time and injection cycle. The objective of this study is to know the CO2 huff and puff perfomance for improving oil recovery on low permeability reservoir. The result of the soaking time cases yields optimum condition in 21 days. For the case of injection cycle, the result for optimum condition is in 2 injection cycles. The recovery factor (RF) for both optimum condition reaches 22.96% from the baseline without gas injection (RF 5.82%).

Low-Cost Development Plan Optimization for a Polish Oil Field

2021 ◽  
Author(s):  
Daniel Podsobinski ◽  
Roman Madatov ◽  
Bartlomiej Kawecki ◽  
Grzegorz Paliborek ◽  
Piotr Wójcik ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Capital Expenditure ◽  
Oil Production ◽  
Oil Field ◽  
Oil Fields ◽  
Development Plan ◽  
Recovery Factor ◽  
Co2 Injection ◽  
Development Scenarios ◽  
Injection Water

Abstract In Poland there are approximately 60 oil fields located in different geological structures. Most of these fields have been producing for several years to several dozen years, and now require redefining of the development plan by utilizing an improved oil recovery (IOR) or enhanced oil recovery (EOR) method to achieve a higher oil recovery factor. Here we present the redevelopment plan for the Polish Main Dolomite oil field, that aimed to optimize and maximize the oil recovery factor. Considering all available geological and reservoir data, both a static and dynamic model were built and calibrated for three separate reservoirs connected to the same production facility. Then the comprehensive study was performed where different development scenarios was considered and tested using reservoir numerical simulation. The proposed redevelopment scenarios included excessive gas reinjection to the main reservoir, additional high-nitrogen (N2) gas injection from a nearby gas reservoir (87% of N2), carbon dioxide (CO2) injection, water injection, polymer injection, water-alternating-gas (WAG), well stimulation, and a combination of these methods. Development plans assumes also drilling new injection and production wells and converting existing producers to gas or water injectors. The key component in development scenarios was to arrest the pressure decline from the main field and decrease the gas/oil ratio (GOR). An additional challenge was to implement in the simulation model all key assumptions behind various development scenarios, while also taking into account specific facility constraints and simultaneously handling separate reservoirs that are connected to the same facility, and hence affecting each other. From numerous scenarios, the scenario that requires the least number of new wells was selected and further optimized. It considers the drilling of only one new producer, one new water injector, and conversion of some currently producing wells to gas and water injectors. The location of the proposed well and the amount of injection fluids was optimized to achieve the highest oil recovery factor and to postpone gas and water breakthrough as much as possible. The optimized case that assumes low investments is expected to improve incremental oil production by 90% over No Further Actions Scenario. However, the study suggests the potential of more than tripling incremental oil production under a scenario with considerably higher expenditures. The improved case assumes drilling one more producer, four new water injectors, and injection of three times more water. The presented field optimization example highlights that in many existing Polish oil fields there is still a potential to reach higher oil recovery without considerable expenditures. However, to obtain more significant oil recovery improvement, higher capital expenditure is necessary. To facilitate the selection of the best development scenario, a detailed economic and risk analysis needs to be conducted.

Managing limited subsurface data in a mature oil field case study: extending the production lifetime of a 50-year-old oil field in Indonesia: Rantau oil field Waterflood Pilot Project

2013 ◽  
Vol 53 (2) ◽  
pp. 489
Author(s):  
Reza Ardianto
Keyword(s):  
Oil Recovery ◽  
Oil And Gas ◽  
Oil Production ◽  
Pilot Project ◽  
Oil Field ◽  
Oil Fields ◽  
Water Flooding ◽  
Peak Oil ◽  
Screening Criteria ◽  
The Government

Business management of oil and gas in Pertamina State Oil enterprises was handed to one of its subsidiaries: Pertamina EP (PEP). With a vast working area of 140,000 km2, it consists of 214 fields where 80% is an old field (mature field or brown field). Most of these oil fields were discovered during Dutch colonialism. One of these fields was Rantau oil field, discovered in 1928; it is considered one of potential structure at the time. Peak oil production was achieved at 31,711 barrels of oil per day (BOPD) (wc 17.2%) in 1969, and it is still producing 2,500 BOPD from primary stage.To get better recovery from the Rantau oil field, it is necessary to identify the potential of secondary recovery water-flooding. Some screening criteria had been completed to select an appropriate method that could be applied in the Rantau field. PEP is preparing an Enhanced Oil Recovery (EOR) program to be applied in some oil fields with subsurface and surface potential consideration. The implementation was initiated by the EOR Department at PEP. The issue of the national oil production increasing program from the government has to be realised by the EOR Department at Pertamina EP. Following the national oil increasing program, management of PEP urged to increase oil production in a rapid and realistic way. As a result, the program of secondary and tertiary recovery pilot project should be conducted simultaneously by the EOR Department on some of the fields that have passed their peak. On the other hand, PEP has only limited geology, geophysics, reservoir, and production (GGRP) data, and most of the oil fields have been producing since 1930s. The conditions that have to be dealt with are as follows: production from the existing field is declining, data is collected and interpreted during a long period, huge amounts of production data, and reservoir model and simulation do not exist and are not frequently updated. Based on this, the planning of EOR struggled due to length of time needed versus the need for quick development. It has become much more of a challenge for the team consisting of integrated geophysics, geology, reservoir, production, process facility, project management and economic evaluation. This extended abstract presents the term of managing limited GGRP data that contributes to the successful pilot waterflood project in the Rantau field. It also explains the uses of limited subsurface GGRP data to overcome the uncertainty for planning of the waterflood pilot project in the Rantau field, as a part of planning using limited data.

scholarly journals The Effect of Carbonyl and Hydroxyl Compounds on Swelling Factor, Interfacial Tension, and Viscosity in CO2 Injection: A Case Study on Aromatic Oils

Processes ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 94
Author(s):  
Asep Kurnia Permadi ◽  
Egi Adrian Pratama ◽  
Andri Luthfi Lukman Hakim ◽  
Doddy Abdassah
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Viscosity Reduction ◽  
Co2 Injection ◽  
Minimum Miscibility Pressure ◽  
Lower Viscosity ◽  
Hydroxyl Compounds ◽  
Swelling Factor

A factor influencing the effectiveness of CO2 injection is miscibility. Besides the miscible injection, CO2 may also contribute to oil recovery improvement by immiscible injection through modifying several properties such as oil swelling, viscosity reduction, and the lowering of interfacial tension (IFT). Moreover, CO2 immiscible injection performance is also expected to be improved by adding some solvent. However, there are a lack of studies identifying the roles of solvent in assisting CO2 injection through observing those properties simultaneously. This paper explains the effects of CO2–carbonyl and CO2–hydroxyl compounds mixture injection on those properties, and also the minimum miscibility pressure (MMP) experimentally by using VIPS (refers to viscosity, interfacial tension, pressure–volume, and swelling) apparatus, which has a capability of measuring those properties simultaneously within a closed system. Higher swelling factor, lower viscosity, IFT and MMP are observed from a CO2–propanone/acetone mixture injection. The role of propanone and ethanol is more significant in Sample A1, which has higher molecular weight (MW) of C7+ and lower composition of C1–C4, than that in the other Sample A9. The solvents accelerate the ways in which CO2 dissolves and extracts oil, especially the extraction of the heavier component left in the swelling cell.

Geomechanical aspects of induced microseismicity during CO2 injection in Illinois Basin

2021 ◽  
Vol 40 (11) ◽  
pp. 823-830
Author(s):  
Nikita Bondarenko ◽  
Sherilyn Williams-Stroud ◽  
Jared Freiburg ◽  
Roman Makhnenko
Keyword(s):  
Oil Field ◽  
Co2 Injection ◽  
Low Permeability ◽  
Illinois Basin ◽  
Petrographic Analysis ◽  
Flow Properties ◽  
Geomechanical Characterization ◽  
Fluid Penetration ◽  
Geophysical Log

Carbon sequestration activities are increasing in a global effort to mitigate the effects of greenhouse gas emissions on the climate. Injection of wastewater and oil-field fluids is known to induce seismic activity. This makes it important to understand how that risk relates to CO2 injection. Injection of supercritical CO2 into the Cambrian Mt. Simon sandstone in Illinois Basin induced microseismicity that was observed below the reservoir, primarily in the Precambrian crystalline basement. Geomechanical and flow properties of rock samples from the involved formations were measured in the laboratory and compared with geophysical log data and petrographic analysis. The controlling factors for induced microseismicity in the basement seem to be the hydraulic connection between the reservoir and basement rock and reactivation of pre-existing faults or fractures in the basement. Additionally, the presence of a laterally continuous low-permeability layer between reservoir and basement may have prevented downward migration of pore pressure and reactivation of critically stressed planes of weakness in the basement. Results of the geomechanical characterization of this intermediate layer indicate that it may act as an effective barrier for fluid penetration into the basement and that induced microseismicity is likely to be controlled by the pre-existing system of faults. This is because the intact material is not expected to fail under the reservoir stress conditions.

Laboratory studies of oil-washing characteristics of surfactants in the pore space of reservoir rocks

2021 ◽  
pp. 86-98
Author(s):  
V. Yu. Ogoreltsev ◽  
S. A. Leontiev ◽  
A. S. Drozdov
Keyword(s):  
Oil Recovery ◽  
Pore Space ◽  
Oil Field ◽  
Oil Fields ◽  
Molecular Surface ◽  
Laboratory Studies ◽  
Reservoir Rocks ◽  
Technological Efficiency ◽  
Chemical Eor ◽  
Physical And Chemical

When developing hard-to-recover reserves of oil fields, methods of enhanced oil recovery, used from chemical ones, are massively used. To establish the actual oil-washing characteristics of surfactant grades accepted for testing in the pore space of oil-containing reservoir rocks, a set of laboratory studies was carried out, including the study of molecular-surface properties upon contact of oil from the BS10 formation of the West Surgutskoye field and model water types with the addition of surfactants of various concentrations, as well as filtration tests of surfactant technology compositions on core models of the VK1 reservoir of the Rogozhnikovskoye oil field. On the basis of the performed laboratory studies of rocks, it has been established that conducting pilot operations with the use of Neonol RHP-20 will lead to higher technological efficiency than from the currently used at the company's fields in the compositions of the technologies of physical and chemical EOR Neonol BS-1 and proposed for application of Neftenol VKS, Aldinol-50 and Betanol.

Indoor Study of Viscosity Reducer for Thickened Oil of Huancai

2012 ◽  
Vol 268-270 ◽  
pp. 547-550
Author(s):  
Qing Wang Liu ◽  
Xin Wang ◽  
Zhen Zhong Fan ◽  
Jiao Wang ◽  
Rui Gao ◽  
...  
Keyword(s):  
Interfacial Tension ◽  
Oil Recovery ◽  
Heavy Oil ◽  
High Viscosity ◽  
Oil Field ◽  
Viscosity Reduction ◽  
Oil Viscosity ◽  
Low Viscosity ◽  
Viscosity Reducer ◽  
Oil Water

Liaohe oil field block 58 for Huancai, the efficiency of production of thickened oil is low, and the efficiency of displacement is worse, likely to cause other issues. Researching and developing an type of Heavy Oil Viscosity Reducer for exploiting. The high viscosity of W/O emulsion changed into low viscosity O/W emulsion to facilitate recovery, enhanced oil recovery. Through the experiment determine the viscosity properties of Heavy Oil Viscosity Reducer. The oil/water interfacial tension is lower than 0.0031mN•m-1, salt-resisting is good. The efficiency of viscosity reduction is higher than 90%, and also good at 180°C.

Oil Production Cost Function and Oil Recovery Implementation- Evidence from an Iranian Oil Field

2015 ◽  
Vol 33 (4) ◽  
pp. 459-470 ◽  
Author(s):  
Vahid Ghorbani Pashakolaie ◽  
Shahla Khaleghi ◽  
Teymor Mohammadi ◽  
Morteza Khorsandi
Keyword(s):  
Cost Function ◽  
Oil Recovery ◽  
Production Cost ◽  
Oil Production ◽  
Oil Field

scholarly journals Optimization of reinjection treatment technology for oilfield wastewater in Longdong area

2020 ◽  
Vol 194 ◽  
pp. 04046
Author(s):  
Xiulan Zhu ◽  
Yanlong Ran ◽  
Wenjie Guo ◽  
Ke Gai ◽  
Yanju Li ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Solid Phase ◽  
Sewage Treatment ◽  
Water Injection ◽  
Oil Production ◽  
High Water ◽  
Oil Field ◽  
Treatment Technology ◽  
Water Separation ◽  
High Water Cut

With the long-term water injection development of Longdong oilfields, most of the oilfield blocks have been fully in the mid-high water cut period, and the amount of oil production wastewater is increasing year by year. In order to prevent the waste of resources and energy of oil production sewage, the oil production sewage after reaching the standard is treated for reinjection, which will ensure the sustainable development of the oil field. Oil production wastewater contains crude oil, solid-phase suspended solids and other pollutants, with high salinity, and problems such as difficulty in oil-water separation, sludge, scaling and corrosion. The sewage treatment system uses a multifunctional water treatment device to effectively remove oil and filter through the “special microorganism + air flotation + filtration” process, and build a sludge sewage tank for sludge discharge and backwashing. The reformed oil recovery wastewater reinjection treatment technology turns “sewage” into “clear flow”, reduces operating costs, improves wastewater treatment efficiency, and meets the water quality requirements of oilfield reinjection water.

Oil production facilities management improving using the analogy method

2020 ◽  
pp. 42-50
Author(s):  
V.V. Mukhametshin ◽  
Keyword(s):  
Oil Recovery ◽  
Oil Production ◽  
Geological Structure ◽  
Oil Fields ◽  
Facilities Management ◽  
Analogy Method ◽  
Oil Reserves ◽  
High Degree ◽  
Production Facilities

For the conditions of an oil fields group characterized by an insufficiently high degree of oil reserves recovery, an algorithm for objects identifying using parameters characterizing the objects’ geological structure and having a predominant effect on the oil recovery factor is proposed. The proposed algorithm allows us to substantiate and use the analogy method to improve the oil production facilities management efficiency by targeted selection of the information about the objects and processes occurring in them, removing uncertainties in low density conditions, the emergence of real-time decision-making capabilities, determination of optimal ways of current problems solving, reducing the probability of erroneous decisions making, justifying the trend towards the goals achieving.

scholarly journals Research on solutions for connecting to marginal fields at Cuu Long basin to process and transport the products basing on existing petroleum technology and equipment

2021 ◽  
Vol 62 (3a) ◽  
pp. 65-75
Author(s):  
Thinh Van Nguyen ◽  
Keyword(s):  
Crude Oil ◽  
Large Scale ◽  
Oil Production ◽  
Oil Field ◽  
Oil Fields ◽  
Small Scale ◽  
Oil Drilling ◽  
Doi Moi ◽  
Oil Deposits

The Cuu Long basin is equiped with infrastructures and processing facilities serving for large-scale crude oil drilling and production operations. However, most of resevoirs in this area are now depleted, it means that they have reached their peaks and started to undergo decreasing productivity, which lead to a noticable excess capicity of equipment. In order to benefit from those declined oil fieds and maximize performance of platforms, solutions to connect marginal fields have been suggested and employed. Of which, connecting Ca Ngu Vang wellhead platform to the CPP -3 at Bach Ho oil field; platforms RC-04 and RC-DM at Nam Rong - Doi Moi oil filed to RC-1 platform at Rong oil field; wellhead platforms at Hai Su Den and Hai Su Trang oil fields to H4-TGT platform at Te Giac Trang oil field are typical examples of success. Optimistic achivements gained recently urges us to carry out this work with the aim to improve oil production of small reserves and to make best use of existing petroleum technology and equipment at the basin. Results of the research contribute an important part in the commence of producing small-scale oil deposits economically.

Sign in / Sign up

Export Citation Format

Share Document