scholarly journals EFFECTS OF NEEM OIL ON THE PRESERVATION OF MILICIA EXCELSA: EVALUATION OF TERMITICIDAL EFFECTIVENESS

2021 ◽  
Vol 8 (12) ◽  
pp. 315-322
Author(s):  
Ettagbor Hans Enukwa ◽  
Yilom Hyginus Ndang

Wood usage has increased with time, thus, there is need to investigate how wood can be treated with human and environmentally friendly preservative which is effective in protecting wood from termites and other agents of wood deterioration, or improve the wood physical, chemical, mechanical and biological characteristics. The aim of this study was therefore to evaluate the effects of neem oil on Milicia excelsa wood preservation. Treated and untreated pieces of Milicia excelsa wood samples were used to carry out this experiment, a soil bed, and an internal wood exposure to termite’s test was carried out, and measurements taken using a digital weighing machine. The results obtained showed that, when Milicia excelsa is treated with neem oil, its Rate of Decay (ROD) reduces as compared to the untreated pieces. Also, neem oil treated wood when exposed to termite’s attack experiences a slower weight loss compared to untreated samples with significant weight loss. Neem oil is thus not only effective in preserving woods, but also non- toxic to human and the environment.


2019 ◽  
Vol 8 (2) ◽  
Author(s):  
Nofi Utari ◽  
Farah Diba ◽  
Lolyta Sisillia

The aim of the study was to obtain a comparison of the durability of sengon (Falcataria moluccana) and sugi wood (Cryptomeria japonica) after preservation with Jati (Tectona grandis) tree bark waste to subterranean termites Coptotermes curvignathus Holmgren attack and to determine the best concentration of wood preservation from Jati extract. Evaluation the durability of wood used the JIS K 1571 2004 standar method. Test parameters in the study were preservative retention, termite mortality and weight loss of the wood test sample. The results showed the highest retention was achieved in Sengon wood of 0.466 kg /m3 and the followed by Sugi wood which was 0.740 kg /m3. The lowest termites mortality value was in non-teated wood of Sengon wood with value 13.091%, and in other sengon wood which treated by extract of Jati bark with concentration of 2%, 4%, 5%, the termites mortality was 100%. Meanwhile in Sugi wood the termites mortality in non-treated wood was 12.576% and other Sugi wood which treated by extract of Jati bark with concentration of 1%, 2%, 3%, 4%, 5% the mortality value reached 100%. The average percentage values of the highest weight loss was 15.483% in non-treated sugi wood, while the lowest weight loss was in sengon wood which was given 5% extract of teak bark with a concentration of only 2.099%. The optimal concentration of Jati tree bark for wood preservation to Sengon wood was on concentration 25, meanwhile in Sugi wood was on concentration 1%.Keywords: Cryptomeria japonica, ekstrak kulit kayu, Falcataria moluccana, preservation, Tectona grandis



2015 ◽  
Vol 21 ◽  
pp. 121
Author(s):  
Patrick O’Neil ◽  
W. Timothy Garvey ◽  
J. Michael Gonzalez-Campoy ◽  
Pablo Mora ◽  
Rafael Violante Ortiz ◽  
...  


2020 ◽  
Author(s):  
Timea Varga ◽  
Isuri Kurera ◽  
James Clark ◽  
Benjamin Field ◽  
Vidhu Nayyar ◽  
...  


2021 ◽  
Vol 7 ◽  
pp. 205520762098821
Author(s):  
Stephanie P Goldstein ◽  
Adam Hoover ◽  
E Whitney Evans ◽  
J Graham Thomas

Objectives Behavioral obesity treatment (BOT) produces clinically significant weight loss and health benefits for many individuals with overweight/obesity. Yet, many individuals in BOT do not achieve clinically significant weight loss and/or experience weight regain. Lapses (i.e., eating that deviates from the BOT prescribed diet) could explain poor outcomes, but the behavior is understudied because it can be difficult to assess. We propose to study lapses using a multi-method approach, which allows us to identify objectively-measured characteristics of lapse behavior (e.g., eating rate, duration), examine the association between lapse and weight change, and estimate nutrition composition of lapse. Method We are recruiting participants (n = 40) with overweight/obesity to enroll in a 24-week BOT. Participants complete biweekly 7-day ecological momentary assessment (EMA) to self-report on eating behavior, including dietary lapses. Participants continuously wear the wrist-worn ActiGraph Link to characterize eating behavior. Participants complete 24-hour dietary recalls via structured interview at 6-week intervals to measure the composition of all food and beverages consumed. Results While data collection for this trial is still ongoing, we present data from three pilot participants who completed EMA and wore the ActiGraph to illustrate the feasibility, benefits, and challenges of this work. Conclusion This protocol will be the first multi-method study of dietary lapses in BOT. Upon completion, this will be one of the largest published studies of passive eating detection and EMA-reported lapse. The integration of EMA and passive sensing to characterize eating provides contextually rich data that will ultimately inform a nuanced understanding of lapse behavior and enable novel interventions. Trial registration: Registered clinical trial NCT03739151; URL: https://clinicaltrials.gov/ct2/show/NCT03739151



2021 ◽  
pp. 095400832199674
Author(s):  
Tao Guo ◽  
Yang Fan ◽  
Chang Bo ◽  
Zhang Qi ◽  
Han Tao ◽  
...  

Benzoxazine resin exhibits excellent properties and is widely used in many fields. Herein, the synthesis of a novel compound, the bis(2,4-dihydro-2 H-3-(4- N-maleimido)phenyl-1,3-benzoxazinyl)biphenyl (BMIPBB), has been reported, which was synthesized by reacting N-(4-aminophenyl)maleimide (APMI), formaldehyde, and 4,4’-dihydroxybiphenyl. 1,3,5-three(4-(maleimido)phenyl)-1,3,5-triazine (TMIPT) was formed as an intermediate during the reaction. The proton nuclear magnetic resonance (1H-NMR) and Fourier transform-infrared (FTIR) spectroscopy experiments were conducted to determine the structure of BMIPBB. BMIPBB was obtained as a reddish-brown solid in 40.1% yield. The thermal properties of BMIPBB were investigated using differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) techniques. Analysis of the DSC curves revealed that the broad peak representing the release of curing reaction heat appeared in the temperature range of 140–330°C. The peak temperature was 242.59°C and the heat of the reaction was 393.82 J/g, indicating that the rate of the curing reaction was low and the heat of the reaction was high. Analysis of the TGA results revealed that the weight loss rate was 5% at 110°C. The monomer exhibited a significant weight loss in the range of 320–500°C. The compound lost 50% of its weight at a temperature of 427°C.



2021 ◽  
pp. 190-194
Author(s):  
Aravindh S. Ganapathy ◽  
Myron S. Powell ◽  
James L. Pirkle

Extrusion of the superficial cuff of a peritoneal dialysis (PD) catheter is an uncommon complication that may be associated with infection or malfunction. However, extrusion of both the superficial and deep cuffs of a double-cuff catheter is rare and uniformly associated with failure and peritonitis. We report a case of a presternal-type PD double-cuff catheter with extrusion of both cuffs through an abdominal exit site after 6 years of use that has remained functional, which has not been previously reported. In this case, the patient had achieved a 60-kg weight loss resulting in retraction of the subcutaneous tissue around both cuffs, while the catheter was held in place by the titanium connector between the presternal extension tubing and the inner, coiled catheter. In such special circumstances, extrusion of both cuffs may not necessitate urgent catheter removal. A review of the literature revealed previous cases of superficial cuff extrusions with catheters remaining functional but not with deep cuff extrusion.



Holzforschung ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Kévin Candelier ◽  
Janka Dibdiakova

AbstractThis review compiles various literature studies on the environmental impacts associated with the processes of thermal modification of wood. In wood preservation field, the wood modification by heat is considered as an ecofriendly process due to the absence of any additional chemicals. However, it is challenging to find proper scientific and industrial data that support this aspect. There are still very few complete studies on the life cycle assessment (LCA) and even less studies on the environmental impacts related to wood heat treatment processes whether on a laboratory or on an industrial scales. This comprehensive review on environmental impact assessment emphasizes environmental categories such as dwindling of natural resources, cumulative energy intake, gaseous, solid and liquid emissions occurred by the thermal-treated wood industry. All literature-based data were collected for every single step of the process of wood thermal modification like resources, treatment process, transport and distribution, uses and end of life of treated wood products.



1976 ◽  
Vol 38 (1) ◽  
pp. 191-198 ◽  
Author(s):  
D. C. Murray

Of 12 overweight women half received 10 wk. of self-control training and the rest received an equal period aimed at increasing determination to lose weight. Half of each treatment group had expressed a preference for the type of treatment they received and half for the other type of treatment. Both groups lost a statistically significant amount of weight, and at a 3-mo. follow-up there was still a significant weight loss. Follow-up at 6 mo. on 9 of the 12 original subjects indicated both groups regained much of their lost weight. There was no evidence that either type of treatment or receiving one's preferred type of treatment was related to weight loss.



2016 ◽  
Vol 869 ◽  
pp. 112-115 ◽  
Author(s):  
Francisca Pereira de Araújo ◽  
Edson Cavalcanti Silva Filho ◽  
João Sammy Nery de Souza ◽  
Josy Anteveli Osajima ◽  
Marcelo Barbosa Furtini

Soil-cement bricks are good examples of environmentally friendly products. This brick is the combination of soil with compacted cement with no combustion in its production. In this work the physical chemical characteristics of the soil from Piaui for producing this material were investigated. Samples of the soil were collected in three potteries from the county of Bom Jesus and pH analysis were carried out, as well as the rate of organic matter, texture, particle density, limits of liquidity and plasticity rates. The results have shown that the soils have acid tones (pH 5,49 a 6,11), which can be neutralized by adding cement, and organic matter percentages up to 1%. The samples have shown predominantly clay-rich textures with adequate plasticity limits, however, values of liquidity limits and particle density above recommended. Altogether, these soils tend to present viability concerning soil-cement brick production, provided that corrections with additives are made in order to minimize this effect.



Sign in / Sign up

Export Citation Format

Share Document