Controlled three-dimensional polystyrene nano- and micro-structures fabricated by three-dimensional electrospinning
The combination of electrospinning with 3D printing technology opens new pathways for nano- and microfabrication, which can be applied in a wide range of application. This simple and inexpensive method was proven to fabricate 3D fibrous polystyrene structures with controlled morphology and micro to nano-fibre diameter. The controllable movement of the nozzle allows precise positioning of the deposition area of the fibres during electrospinning. A programmed circular nozzle pattern results in the formation of 3D polystyrene cylinder shapes with fibre diameters down to 560 nm. The assembly of the fibrous structures starts instantaneously, and a 4 cm tall and 5 cm wide sample can be produced within a 10-minute electrospinning process. The product exhibits high stability at ambient conditions. The shape, size, and thickness of fibrous polystyrene structures can be easily controlled by tuning the process parameters. It is assumed that the build-up of 3D fibrous polystyrene structure strongly depends on charge induction and polarization of the electrospun fibres.