scholarly journals Cycle of biomass and elements of plant nutrition in soybean crops depending on various preceding crops and primary tillage

2020 ◽  
Vol 11 (3) ◽  
pp. 61-69
Author(s):  
S. P. Tanchyk ◽  
◽  
D.V. Litvinov ◽  
V.V. Sinchenko ◽  
◽  
...  
Keyword(s):  
Nitrogen Removal ◽  
Plant Nutrition ◽  
Crop Residues ◽  
Plant Biomass ◽  
Spring Barley ◽  
Soil Tillage ◽  
Plant Residues ◽  
Soybean Plant ◽  
Biological Cycle ◽  
Primary Tillage

The article analyzes the main laws of the biological cycle of soybean plant biomass, and the parameters of recirculation of nutrients depending on the method and depth of the primary tillage and various preceding crops. It was found that the share of biomass alienated from the field with soybean harvest, depending on the various preceding crops and the primary tillage varied from 31,6 to 32,8 %, which in absolute terms ranged from 1,93 to 3,25 t/ha, and received to the soil with plant residues: from 3,97 to 6,67 t/ha or from 67,2 to 68,4 %. The largest amount of nutrients from 310,2 to 420,5 kg/ha of NPK is involved in soybean crops placed after cereals (winter wheat and spring barley) in the variant of cultivated without soil tillage by 20-22 cm (chisel-deep-tiller), and the lowest after corn for grain from 251,1 to 302,9 kg / ha NPK obtained in the variant during plowing by 20-22 cm. The largest share in the total amount of nutrients in soybean biomass belongs to nitrogen from 61,6 to 65,3 %, the share of phosphorus varies from 12,4 to 14,4 %, and potassium from 20,3 to 25,7 %. The amount of nutrients returned to the soil with plant residues, in relation to their content in the biomass ranges from 41.7 to 55.4% nitrogen, 11,1-14,7 phosphorus and 30,0-46,9 % potassium. It was found that the largest amount of nitrogen enters the soil with crop residues in the variant of soybean placement after soybean and main tillage (disc harrow) by 12-14 cm – 55,4 %. The share of phosphorus was 14,7 %, potassium – 29,8 %. When growing soybeans after cereals, corn for grain and sunflower, the intake of nitrogen in the soil with plant residues was 41,7-42,8 %, phosphorus 11,1-11,2 %, potassium 45,8-46,9 %. The lowest percentage of nitrogen removal - 69.5-69.6% was for the placement of soybeans after soybeans. Although for the removal of phosphorus (14,3%) and potassium – (16,1%) the option of placing soybeans after cereals, corn and sunflower prevailed, where these indicators were respectively (13,0-13,1 %) and (14,5- 14,7 %).

scholarly journals The Effect of Different Soil Tillage Systems and Crop Residues on the Composition of Weed Communities

Agronomy ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1276
Author(s):  
Vaida Steponavičienė ◽  
Aušra Marcinkevičienė ◽  
Lina Marija Butkevičienė ◽  
Lina Skinulienė ◽  
Vaclovas Bogužas
Keyword(s):  
Soil Ph ◽  
Crop Residues ◽  
Soil Tillage ◽  
Reduced Tillage ◽  
Plant Residues ◽  
No Tillage ◽  
Agricultural Crops ◽  
Weed Species ◽  
Tillage Systems ◽  
Weed Communities

The composition of weed communities in agricultural crops is dependent on soil properties and the applied agronomic practices. The current study determined the effect of different tillage systems and crop residue on the soil weed community composition. The research programme encompassed 2013–2015 in a long-term field experiment located in the Experimental Station of Vytautas Magnus University in Lithuania. The soil type in the experimental field was qualified as Endocalcaric Stagnosol (Aric, Drainic, Ruptic, Amphisiltic). Weeds were categorised into communities according to soil pH, nitrogen and moisture indicators. The results of investigations were grouped using cluster analysis. Agricultural crops were dominated by different weed species depending on the soil pH and moisture. Weed species were relatively more frequent indicating nitrogen-rich and very nitrogen-rich soils. In the reduced tillage and no-tillage systems, an increase in the abundance of weed species indicating moderate acidity and low acidity, moderately wet and wet, nitrogen-rich and very nitrogen-rich soils was observed. The application of plant residues decreased the weed species abundance. In the reduced tillage and no-tillage systems, the quantitative distribution of weed was often uneven. By evaluating the association of weed communities with groups of different tillage systems with or without plant residues, their control can be optimised.

scholarly journals Operational effects of implements on crop residues in soil tillage operations

2012 ◽  
Vol 51 (No. 4) ◽  
pp. 119-124 ◽  
Author(s):  
J. Hůla ◽  
R. Šindelář ◽  
P. Kovaříček
Keyword(s):  
Surface Coverage ◽  
Crop Residues ◽  
Spring Barley ◽  
Soil Surface ◽  
Operating Mode ◽  
Soil Tillage ◽  
Maize Crop ◽  
Silage Maize ◽  
Maize Residues ◽  
Control Technologies

After spring barley harvest the operational effects of tillers and seed drill on spring barley residues were evaluated in two variants of cultural operations. Generally low values of soil surface coverage by crop residues after cultural operations were performed document that soil tillage and sowing did not comply with the criteria for conservation technologies – the coverage of soil surface by crop residues was lower by 30% after all cultural operations. After silage maize harvest we determined the weight of maize crop residues and coverage of soil surface by these residues after shallow tillage by a disk tiller when nine variants of the operating mode of the tiller were used. Obviously, the change in the operating mode of the tiller was able to influence the coverage of soil surface by maize residues. The evaluation of the operational effects of disc tiller on crop residues indicated some restraints of the use of this group of implements for conservation (erosion-control) technologies of soil tillage.

scholarly journals ЕФЕКТИВНІСТЬ БЕЗПОЛИЦЕВОГО ОБРОБІТКУ ҐРУНТУ ЗА ВИРОЩУВАННЯ ЯЧМЕНЮ ЯРОГО В ПІВНІЧНОМУ СТЕПУ

2014 ◽  
pp. 25-29
Author(s):  
О. І. Цилюрик ◽  
В. П. Шапка
Keyword(s):  
Water Regime ◽  
Crop Residues ◽  
Spring Barley ◽  
Maximum Amount ◽  
High Yield ◽  
Cereal Crops ◽  
Grain Production ◽  
Small Disc ◽  
Primary Tillage ◽  
Crop Capacity

Вивчено вплив різних способів основного обробіткуґрунту під ячмінь ярий на агрофізичні властивості,водний режим чорнозему звичайного, забур’яненістьпосівів, продуктивність і економічну ефективністьвиробництва зернової культури. Встановлено, щочизельний обробіток ґрунту в умовах посушливогопівнічного Степу України забезпечує зростання аку-муляції ґрунтової вологи в осінньо-зимовий періодзавдяки наявності на поверхні ґрунту рослинних за-лишків попередника і хвилястому нанорельєфу. Цегарантує максимальні запаси продуктивної вологинавесні порівняно з іншими способами основного об-робітку ґрунту, а також високий урожай і найвищийрівень рентабельності виробництва зерна. Викорис-тання мілкого дискового обробітку ґрунту (10–12 см)під ячмінь ярий призводить до підвищення забур’я-неності посівів, що є однією з причин зниження урожай-ності зернофуражної культури на 0,20–0,46 т/га по від-ношенню до полицевої оранки та чизелювання. The effects of different methods of primary tillage for barley on agrophysical properties of chernozem ordinary water regime, crop debris, productivity and economic efficiency of production of cereal crops have been studied.It has been found that chisel tillage in arid northern steppe of Ukraine provides growth accumulation of soil moisture in the fall and winter, due to the presence on the surface of the soil and crop residues predecessor wavy nanoRelief. This ensures the maximum amount of available moisture in the spring compared with other methods of tillage, as well as high yield and high profitability of grain production. Using small disc tillage (10-12 cm) for spring barley leads to higher level of the contamination of crops, it is one of reasons of crop capacity 0,20-0,46 t / ha reduction towards moldboard tillage and chiselling.

scholarly journals Evaluation of wind erosion protective efficiency No-till technology in southern Ukraine steppe conditions

2016 ◽  
Vol 17 (3-4) ◽  
pp. 50-63 ◽  
Author(s):  
S. G. Chornyy ◽  
A. V. Volosheniuk
Keyword(s):  
Wind Erosion ◽  
Crop Residues ◽  
Soil Aggregates ◽  
Erosion Control ◽  
Soil Surface ◽  
Soil Tillage ◽  
Plant Residues ◽  
Random Surface ◽  
No Till ◽  
Wind Erosion Control

The aim of the research was to the efficiency wind erosion control of farming system «no-till» (NT) for conditions of South Steppe of Ukraine. The research was conducted at heavy load southern chornozem in the crop rotation «pea – winter (spring) wheat – sorghum – mustard». In field experiment two options of processing of the soil (traditional and minimum) and NT were studied. Options aggregate of surface soil (0–5 cm), the weight of crop residues and projective covering the soil surface were determined. Research field was equipped by meteorological station and field’s wind erosion dust-meter. The efficiency wind erosion control by NT was evaluated in three directions: the presence of dangerous wind erosion period (February–April) a certain amount of plant residues, that protect of soil surface from extreme winds (1); presence during this period of high values of «random» surface roughness of the soil, which reduces the strength of the wind in ground layer of air (2) and values of soil wind erodibility index (3). Evaluation promises more effective in terms of opening up the soil surface crop residues reveals that NT fully meets the criterion of preserving (erosion control) technology – projective cover ground in a dangerous deflationary period is an average of three years of research on the crops of spring wheat – 37.9 % for sorghum crops – 71.1 % and on crops of mustard – 60.2 %. An important indicator of the erosion control efficiency of soil tillage is percentage of vertically oriented surface plant residues. Unbroken soil surface tillage after harvesting will have the maximum amount of such residues. Analysis of these studies show that when used NT observed maximum value of this parameter – 35–55 %, more than that in other tillage. So the version with traditional soil tillage this parameter does not exceed 5 %, and versions with minimal system soil tillage – 30 %. Estimation of effectiveness of soil protection NT via a «random» surface roughness also shows a high ability wind erosion control this technology. At the same time, it should be stated that the presence of high «random» roughness autumn plowing deep plowed fields, despite the fact that the surface of the soil in the case of poorly protected plant residues. The main index of soil wind erodibility is the fraction greater than 1 mm, the so-called «lumpiness». It is known, lumpiness indicator correlate with various other soil wind erodibility indicators, in particular, the mechanical strength of soil aggregates, containing wind erosion fraction by (<0.25 mm) and wind erodibility indicators there were obtained in portable wind tunnel. Intensive plowing of the soil leads to formation of a surface of the soil with high resistance by the strong winds in the fall (lumpiness – 70–90 %). It is connected with specific mechanisms of formation of soil structure. Plowing of solonetzic chernozems, especially after dry summer and an early autumn, leads to formation of soil structure units of the larger sizes. But during the winter of lumpiness by all options of researches gradually decreases, what is explained, first of all, by action on soil units of the procedures «melting» – «freezing» that, in turn, is function from the number of transitions of temperature of the soil through 0 °C. There is a destruction of soil aggregates and dispersion of the soil, in the conditions of an unstable temperature schedule in the winter, that is a consequence of warming of climate when in the afternoon of air temperature and the soil positive, and at night the soil freezes. At the same time, when the surface of the soil during the winter and at the beginning of spring is unploughed the soil condition, as it is observed on options with NT, the number of procedures of transition through 0 °C soil temperatures sharply decreases, so a destruction of aggregates goes not so intensively on the soil surfaces. But, according to our research, in the spring, lumpiness in variants of the NT is not diminished, was 50–70 %, the lower limit soil wind erodibility for chernozem. This phenomenon is bound to higher humidity of the soil which promotes coagulation of soil particles and existence of a large number of plant residues as source of the biological substances with capacity for bonding. These factors strengthen process of formation of aggregates, large by the size, what leads to increase soil lumpiness. Direct observations of NT wind erosion control efficiency during dust storms on 26th and 27th of January, 2014 showed that soil loss in NT was 3.5 times less them on a variant of traditional tillage and 2.9 times less them on a variant of minimum tillage.

scholarly journals The Process Of Soil Cutting With Rotor Knives Of Combined Ploughsharing-Racked Plow

2019 ◽  
Author(s):  
N. Vasylynych ◽  
V. Duganec ◽  
Y. Pantsyr
Keyword(s):  
Technological Process ◽  
Crop Residues ◽  
Soil Tillage ◽  
Mineral Fertilizers ◽  
Plant Residues ◽  
Basic Parameters ◽  
Soil Preparation ◽  
Soil Cutting ◽  
Deep Plowing ◽  
Research Analysis

Soil tillage is the most energy-intensive and costly process. Therefore, the creation of combined machines that perform multiple operations in one workflow is a pressing issue for today, the solution of which is inextricably linked to the integration of agricultural operations into one technological process that brings economic, organizational and agrobiological benefits. Based on the peculiarities of soil preparation for planting or planting crops as an object, and the need for further scientific design of the combined technological process of soil application of fertilizers, active crumbling and cultivation of root, plant residues and fertilizers as a subject, the purpose of scientific research analysis of the interaction of the rotor with the reservoir, determination and optimization of the basic parameters of knives, radius, rotational speed with a view to providing classic soil cutting and mixing with fertilizers. At State Agrarian and Engineering University in Podiya the design of the combined plow was developed. The technological process of their work combines the operations of deep plowing, the active grinding of the formation and the earning of root and crop residues, as well as the introduction of mineral fertilizers. As a result of researches, the angles of installation of the knife with respect to the radius of the rotor α, the angle of sharpening γ, the cutting angle ψ, the occipital angle ζ, the angle of conicity of the rotor β, the angle of displacement of the blades (rays) of the attachment, the magnitude of the transformation of the angle of sharpening, the analysis of the part of the sharpening , and according to its results the required speed of rotation at which the soil passes on the surface of the knife without loading is determined and the effect of its unloading is provided

Dynamics of CO2 emission from chernozems under agricultural use

2017 ◽  
Vol 4 (3) ◽  
pp. 43-49
Author(s):  
M. Miroshnychenko ◽  
O. Siabruk
Keyword(s):  
Carbon Dioxide ◽  
Agricultural Practices ◽  
Growing Season ◽  
Warm Period ◽  
Direct Seeding ◽  
Soil Tillage ◽  
Plant Residues ◽  
Hydrothermal Conditions ◽  
Organic Mineral ◽  
Mineral System

Aim. The comparison of the effect of hydrothermal conditions and various agricultural practices on the emission of CO 2 from chernozems in the Left-Bank Forest-Steppe of Ukraine. Methods. The dynamics of the intensity of carbon dioxide emissions from chernozem calcic (typical chernozem – in Ukrainian classifi cation) was studied during the growing season of 2011–2012. The observations were based on two fi eld experiments with various methods of soil till- age (6–7 years from the beginning of the experiment) and fertilization systems (21–22 years from the beginning of the experiment). Particularly, plowing at 20–22 cm, disking at 10–12 cm, cultivation at 6–8 cm and direct seeding using Great Plains drill were studied among the soil tillage methods. Mineral system (N 45 P 50 K 45 ), organic system (manure 8 t/ha) and combined organic-mineral system (manure 8 t/ha + N 45 P 50 K 45 ) were studied among fertilization systems. The intensity of CO 2 fl ux was determined using the non-stationary respiratory chambers by the alkaline absorption method, with averaging of the results during the day and the frequency of once a month. Results. During the warm period, the emission of carbon dioxide from the soil changes dynamically depending on temperature and humidity. The maximum of emission coincides with the periods of warm summer showers in June-July, the minimum values are characteristic for the late autumn period. The total emission losses of carbon in chernozems over the vegetation period ranged from 480 to 910 kg/ha and varied depending on the methods of tillage ± (4.0–6.0) % and fertilization systems ± (3.8–7.1) %. The changes in the intensity of CO 2 emission from the soil under different methods of soil tillage are associated with hydrothermal regime and the depth of crop residues location. The biggest difference is observed im- mediately after tillage, but in the spring period the differences are only 12–25 %, and after drying of the top layer of soil become even less. Direct seeding technology provides the greatest emission of CO 2 from chernozem, which is fa- cilitated by better water regime and more complete mineralization of plant residues on the soil surface. Annual losses of carbon are the least under disking of soil at 10–12 cm. The changes in the intensity of CO 2 emission from the soil under different fertilization systems are associated with the involvement of the additional organic matter from plant residues and manure to the microbiological decomposition. The greatest emission was observed under the organic- mineral fertilization system, which increased the loss of carbon by 7–8 % in comparison with the mineral system in the unfavorable hydrothermal year and by 11–15 % in the more favorable year. These differences are observed mainly during the fi rst half of the growing season when there is a clear tendency to increase the intensity of soil respiration. Conclusions. The hydrothermal conditions of the warm period of the year are decisive in the formation of the CO 2 emission fl ow from chernozems. Due to the improvement of agricultural practices, emissions might be reduced but not more that by 15 % of natural factor contribution.

Evaluation of Nurse Crops for Weed Control and Plant Establishment in Prairie Restoration

HortScience ◽  
1998 ◽  
Vol 33 (3) ◽  
pp. 485b-485
Author(s):  
Lisa M. Barry ◽  
Michael N. Dana
Keyword(s):  
Plant Biomass ◽  
Spring Barley ◽  
Dry Weight ◽  
Site Quality ◽  
Prairie Restoration ◽  
Plant Establishment ◽  
Significant Difference ◽  
Nurse Crops ◽  
Partridge Pea ◽  
Prairie Plant

Nurse crops are often recommended in prairie restoration planting. This work investigated several alternative nurse crops to determine their utility in prairie planting. Nurse crops were composed of increasing densities (900, 1800, or 2700 seeds/m2) of partridge pea, spring oats, spring barley, Canada wild rye, or equal mixtures of partridge pea and one of the grasses. The experimental design was a randomized complete-block set in two sites with three blocks per site and 48 treatments per block. Each 3 × 3-m plot contained 1 m2 planted in Dec. 1995 or Mar. 1996 with an equal mix of seven prairie species. The nurse crops were sown over each nine square meter area in April 1996. Plots lacking nurse crops served as controls. Evaluated data consisted of weed pressure rankings and weed and prairie plant dry weight. Nurse crop treatments had a significant effect on weed pressure in both sites. Barley (1800 and 2700 seeds/m2) as well as partridge pea + barley (2700 seeds/m2) were most effective at reducing weed pressure. When weed and prairie plant biomass values were compared, a significant difference was observed for site quality and planting season. Prairie plant establishment was significantly greater in the poorly drained, less-fertile site and spring-sown plots in both sites had significantly higher prairie biomass values. Overall, after two seasons, there was no advantage in using nurse crops over the control. Among nurse crop treatments, oats were most effective in reducing weed competition and enhancing prairie plant growth.

scholarly journals Effect of Row Spacing and Seeding Rate on Russian Thistle (Salsola tragus) in Spring Barley and Spring Wheat

Plants ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 126
Author(s):  
Judit Barroso ◽  
Nicholas G. Genna
Keyword(s):  
Seed Production ◽  
Crop Yield ◽  
Spring Wheat ◽  
Plant Biomass ◽  
Integrated Management ◽  
Spring Barley ◽  
Management Strategies ◽  
Crop Productivity ◽  
Row Spacing ◽  
Seeding Rate

Russian thistle (Salsola tragus L.) is a persistent post-harvest issue in the Pacific Northwest (PNW). Farmers need more integrated management strategies to control it. Russian thistle emergence, mortality, plant biomass, seed production, and crop yield were evaluated in spring wheat and spring barley planted in 18- or 36-cm row spacing and seeded at 73 or 140 kg ha−1 in Pendleton and Moro, Oregon, during 2018 and 2019. Russian thistle emergence was lower and mortality was higher in spring barley than in spring wheat. However, little to no effect of row spacing or seeding rate was observed on Russian thistle emergence or mortality. Russian thistle seed production and plant biomass followed crop productivity; higher crop yield produced higher Russian thistle biomass and seed production and lower crop yield produced lower weed biomass and seed production. Crop yield with Russian thistle pressure was improved in 2018 with 18-cm rows or by seeding at 140 kg ha−1 while no effect was observed in 2019. Increasing seeding rates or planting spring crops in narrow rows may be effective at increasing yield in low rainfall years of the PNW, such as in 2018. No effect may be observed in years with higher rainfall than normal, such as in 2019.

scholarly journals Sources of Nitrogen for Winter Triticale (Triticosecale Wittm. ex A.Camus) Succeeding Pea (Pisum sativum L.)

Agronomy ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 527
Author(s):  
Andrzej Wysokinski ◽  
Izabela Lozak ◽  
Beata Kuziemska
Keyword(s):  
Root Nodule ◽  
Crop Residues ◽  
Spring Barley ◽  
Sandy Soils ◽  
High Availability ◽  
Atmospheric Nitrogen ◽  
15N Isotope ◽  
Carbon And Nitrogen ◽  
Winter Triticale ◽  
Pisum Sativum L

Atmospheric nitrogen biologically reduced in legumes root nodule and accumulated in their postharvest residues may be of great importance as a source of this macronutrient for succeeding crops. The aim of the study was to determine nitrogen uptake by winter triticale from pea postharvest residues, including N fixed from atmosphere, using in the study fertilizer enriched with the 15N isotope. Triticale was grown without nitrogen fertilization at sites where the forecrops had been two pea cultivars (multi-purpose and field pea) and, for comparison, spring barley. The triticale crop succeeding pea took up more nitrogen from the soil (59.1%) and less from the residues of the forecrop (41.1%). The corresponding values where the forecrop was barley were 92.1% and 7.9%. In the triticale, the percentage of nitrogen derived from the atmosphere, introduced into the soil with pea crop residues amounted to 23.8%. The amounts of nitrogen derived from all sources in the entire biomass of triticale plants grown after harvesting of pea were similar for both pea cultivars. The cereal took up more nitrogen from all sources, when the soil on which the experiment was conducted had higher content of carbon and nitrogen and a greater amount of N was introduced with the pea residues. Nitrogen from pea residues had high availability for winter triticale as a succeeding crop cultivated on sandy soils.

Sign in / Sign up

Export Citation Format

Share Document