scholarly journals Consumers' Perceptions and Preferences toward Florida Orange Juice

EDIS ◽  
2021 ◽  
Vol 2021 (6) ◽  
Author(s):  
Yan Heng ◽  
Lisa House ◽  
Sungeun Yoon

Faced with reduced domestic supply, competition from imports, and high production costs, the Florida citrus industry and Florida growers need to understand how consumers perceive Florida-produced orange juice and whether they value it more than OJ produced elsewhere. We conducted a national survey to understand consumers' perceptions and confirmed that consumers have a superior perception of Florida OJ, which could lead to higher rates of willingness-to-buy and willingness-to-pay.

Author(s):  
Judith L. Kolva ◽  
Joseph Heinzman, Jr. ◽  
Yvonne Puente

For over 70 years, the Florida citrus industry has been protected from foreign competition by a tariff on orange juice. The orange juice tariff is currently being threatened by negotiations over the Free Trade Area of the Americas (FTAA) agreement and the World Trade Organization (WTO). Brazil is the leading foreign competitor to the Florida citrus industry. The tariff prevents Brazil from becoming a large citrus cartel that could take control of the worlds orange juice market. The Florida citrus industry contributes $9.1 billion to Floridas economy and provides jobs for 90,000 Florida citizens. Orange juice production is a key to the strength of Floridas economy. Florida citrus growers argue that the tariff is the most important issue facing the industrys survival. Without the tariff, Florida citrus growers are in danger of going out of business. This could devastate Floridas economy. It is important that Florida citrus growers and FTAA negotiators unite and intensify efforts to protect the citrus tariff and ensure the survival of Floridas citrus industry.


Author(s):  
J. F. Stilling

It is well-known that methods for handling empty cans in can plants and packing plants have been undergoing considerable change during the past few years. I know that many of you here today have been active in promoting such changes and in cooperating with the can producers to the end that the changes may be of mutual benefit. That there has been considerable progress in can handling methods is particularly true of the Florida Citrus Industry — which has used over 1-1/2 billion 6 oz. juice cans annually to pack fresh, frozen concentrated orange juice. Paper published with permission.


HortScience ◽  
2018 ◽  
Vol 53 (11) ◽  
pp. 1655-1663 ◽  
Author(s):  
Ariel Singerman ◽  
Marina Burani-Arouca ◽  
Stephen H. Futch

The Florida citrus industry has been enduring the impact of citrus greening since 2005. The disease has been the main driver for the state’s citrus production to plummet by 80% in the past 13 years, causing the industry to downsize drastically. Planting new groves is key to ensuring a supply of fruit for processors and packinghouses to stay in business. However, a key question is whether it makes economic sense to plant a new grove in the current environment. We estimate the establishment and production costs for a new grove under endemic Huanglongbing (HLB; citrus greening) conditions for three different tree planting densities under different market conditions and examine their profitability. Our results show that establishing a new grove with a tree density similar to that of the state’s average is not profitable under current market conditions. However, greater tree densities are profitable despite the greater level of investment required.


1976 ◽  
Vol 8 (1) ◽  
pp. 131-135
Author(s):  
Ronald W. Ward

The Florida citrus industry is in the unique position of being both importer and exporter of frozen concentrated orange juice. On one hand, exports provide the industry with an additional outlet for concentrate. On the other, imports being brought into the U.S. market creates considerable controversy as to whether this imported juice is economically desirable for the industry.Two basic issues have evolved from these international trading activities. First, Florida exports concentrate on both Canadian and European markets. The former differs little from the domestic market. In contrast, the European market is expected to differ substantially from the U.S. market. Florida faces a number of competing suppliers in Europe. Often, the price of foreign concentrate exported to Europe is priced lower than Florida's export price. Recognizing that competition exists in the European market, how then should Florida price its product relative to the world price? Similarly, should the Florida export price be discounted to the domestic?


2020 ◽  
Vol 51 (4) ◽  
Author(s):  
Abdullah & Al-Taye

This study was aimed at assessing marketing efficiency in the main sites of meat production of calf fattening fields in the private sector due to the importance of meat, especially red meat, which has essential nutrient for human body growth and high commodity prices depending on the measurement indicators used to suit the nature of the research conducted in calves fattening production fields in Gogjali region- Nineveh  (2018). The basic source data of the study is obtained from sources on the ongoing ground- marketing questionnaire of three levels, the producer, the wholesaler, the retailer and two fields groups of caste random sample. The first group included (100) fields with imported calves class. The second included (51) fields with local calves class. Whereas, according to the production and marketing costs indicator, the average of marketing efficiency (ME1 ) of marketed meat in both groups of claves fattening fields amounted (92.47, 93.39%) respectively for a kilogram which is a sign of high production costs and, according to the marketing margins indicator, the average of marketing efficiency (ME2 ) of marketed meat in both groups of claves fattening fields amounted (86.89,79.13 %) for per kg which is a sign of high marketing margins. Thus the study concluded a high value of marketing efficiency using the first scale with the fattening period time for both groups while marketing efficiency by using the second scale was characterized by the gradual decline in the imported fattening fields and a gradual rise in the local fattening fields.  The study recommends supporting production inputs (fodder, treatment), unifying markets and limiting the    importation of red meat importation  in order to obtain a good production and currency policy by which the production costs could be reduced to the minimum .


2021 ◽  
Vol 3 (1) ◽  
pp. 19-36
Author(s):  
Tamás Mizik ◽  
Gábor Gyarmati

As Earth’s fossil energy resources are limited, there is a growing need for renewable resources such as biodiesel. That is the reason why the social, economic and environmental impacts of biofuels became an important research topic in the last decade. Depleted stocks of crude oil and the significant level of environmental pollution encourage researchers and professionals to seek and find solutions. The study aims to analyze the economic and sustainability issues of biodiesel production by a systematic literature review. During this process, 53 relevant studies were analyzed out of 13,069 identified articles. Every study agrees that there are several concerns about the first-generation technology; however, further generations cannot be price-competitive at this moment due to the immature technology and high production costs. However, there are promising alternatives, such as wastewater-based microalgae with up to 70% oil content, fat, oils and grease (FOG), when production cost is below 799 USD/gallon, and municipal solid waste-volatile fatty acids technology, where the raw material is free. Proper management of the co-products (mainly glycerol) is essential, especially at the currently low petroleum prices (0.29 USD/L), which can only be handled by the biorefineries. Sustainability is sometimes translated as cost efficiency, but the complex interpretation is becoming more common. Common elements of sustainability are environmental and social, as well as economic, issues.


Polymers ◽  
2018 ◽  
Vol 10 (11) ◽  
pp. 1197 ◽  
Author(s):  
Warren Blunt ◽  
David Levin ◽  
Nazim Cicek

Microbial polyhydroxyalkanoates (PHAs) are promising biodegradable polymers that may alleviate some of the environmental burden of petroleum-derived polymers. The requirements for carbon substrates and energy for bioreactor operations are major factors contributing to the high production costs and environmental impact of PHAs. Improving the process productivity is an important aspect of cost reduction, which has been attempted using a variety of fed-batch, continuous, and semi-continuous bioreactor systems, with variable results. The purpose of this review is to summarize the bioreactor operations targeting high PHA productivity using pure cultures. The highest volumetric PHA productivity was reported more than 20 years ago for poly(3-hydroxybutryate) (PHB) production from sucrose (5.1 g L−1 h−1). In the time since, similar results have not been achieved on a scale of more than 100 L. More recently, a number fed-batch and semi-continuous (cyclic) bioreactor operation strategies have reported reasonably high productivities (1 g L−1 h−1 to 2 g L−1 h−1) under more realistic conditions for pilot or industrial-scale production, including the utilization of lower-cost waste carbon substrates and atmospheric air as the aeration medium, as well as cultivation under non-sterile conditions. Little development has occurred in the area of fully continuously fed bioreactor systems over the last eight years.


2018 ◽  
Vol 1 (1) ◽  
Author(s):  
Ahmad Nurfiki Alwi ◽  
Arif Rahman Setiaji ◽  
Abdurrohim Kurnia Agung ◽  
Abdul Halim

The number of economic needs is one of the fundamental aspects to support the survival of every individual in an area.  If seen in general, the cost of building the building and residential community still use building materials and installation costs are relatively higher.  With the advancement of technology has found a lightweight brick that has better strength, lighter, faster installation and environmentally friendly, so many people began to switch to using lightweight bricks.  For now the price of lightweight brick is still expensive, but this deficiency is covered with the speed of mounting and light weight so overall lightweight brick usage on certain patterns is very profitable.  The use of cement on lightweight bricks leads to high production costs.  With the above problems we have a breakthrough to replace the cement by using zeozolites containing silica compounds that resemble one of the cement compounds.  In this research, cement replacement with Zeolite is 20%, 40% and 60%.  Before use Zeolite was first activated using Fly Ash ratio of 65% Zeolite: 35% Fly Ash and 50% Zeolite: 50% Fly Ash, also activated using Ca (OH) 2 ratio 65% Zeolite: 35% Ca (OH) 2  And 50% Zeolite: 50% Ca (OH) 2.  Thus, there are 15 compositions including the control composition, each composition will be made up of 10 specimens.  Hypothesis testing using two way anova, tested is the effect of cement change treatment with Zeolite and comparison of Zeolite composition with Fly Ash and Ca (OH) 2 to compressive strength, absorption and cost. Keywords: Zeolite, Cement, compressive strength, Cost


Nanomaterials ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 175
Author(s):  
Priyanka Prakash ◽  
Wing-Hin Lee ◽  
Ching-Yee Loo ◽  
Hau Seung Jeremy Wong ◽  
Thaigarajan Parumasivam

Polyhydroxyalkanoates (PHAs) are natural polymers produced under specific conditions by certain organisms, primarily bacteria, as a source of energy. These up-and-coming bioplastics are an undeniable asset in enhancing the effectiveness of drug delivery systems, which demand characteristics like non-immunogenicity, a sustained and controlled drug release, targeted delivery, as well as a high drug loading capacity. Given their biocompatibility, biodegradability, modifiability, and compatibility with hydrophobic drugs, PHAs often provide a superior alternative to free drug therapy or treatments using other polymeric nanocarriers. The many formulation methods of existing PHA nanocarriers, such as emulsion solvent evaporation, nanoprecipitation, dialysis, and in situ polymerization, are explained in this review. Due to their flexibility that allows for a vessel tailormade to its intended application, PHA nanocarriers have found their place in diverse therapy options like anticancer and anti-infective treatments, which are among the applications of PHA nanocarriers discussed in this article. Despite their many positive attributes, the advancement of PHA nanocarriers to clinical trials of drug delivery applications has been stunted due to the polymers’ natural hydrophobicity, controversial production materials, and high production costs, among others. These challenges are explored in this review, alongside their existing solutions and alternatives.


Sign in / Sign up

Export Citation Format

Share Document