scholarly journals The Impact of Coal and Biomass Co-Firing on the Economy of Power Plant Carbon Capture

2020 ◽  
Vol 12 (2) ◽  
pp. 67-77
Author(s):  
Quan Zhuang ◽  
Philip Geddis ◽  
Bruce Clements

A detailed economic evaluation was carried out to determine the impact of biomass and coal co-firing on power plant carbon capture by methods of plants equipment designing factors and performance, and the sum up of the associated breakdowns of CAPEX and OPEX. Based on the assumptions of the CO2 neutrality of biomass and likely governmental incentives to reduce CO2 emissions, the study results show that biomass and coal co-firing would result in both lower cost of carbon avoided (carbon capture) and lower incremental cost of electricity generation when MEA solvent carbon capture is applied. Two scenarios for co-firing with carbon capture, 30% biomass blending and 90% or 60% CO2 capture from stack, indicate different preference depending on lower or higher incentives.

Author(s):  
Mohammad Mansouri Majoumerd ◽  
Mohsen Assadi ◽  
Peter Breuhaus

Most of the scenarios presented by different actors and organizations in the energy sector predict an increasing power demand in the coming years mainly due to the world’s population growth. Meanwhile, global warming is still one of the planet’s main concerns and carbon capture and sequestration is considered one of the key alternatives to mitigate greenhouse gas emissions. The integrated gasification combined cycle (IGCC) power plant is a coal-derived power production technology which facilitates the pre-combustion capture of CO2 emissions. After the establishment of the baseline configuration of the IGCC plant with CO2 capture (reported in GT2011-45701), a techno-economic evaluation of the whole IGCC system is presented in this paper. Based on publicly available literature, a database was established to evaluate the cost of electricity (COE) for the plant using relevant cost scaling factors for the existing sub-systems, cost index, and financial parameters (such as discount rate and inflation rate). Moreover, an economic comparison has been carried out between the baseline IGCC plant, a natural gas combined cycle (NGCC), and a supercritical pulverized coal (SCPC) plant. The calculation results confirm that an IGCC plant is 180% more expensive than the NGCC. The overall efficiency of the IGCC plant with CO2 capture is 35.7% (LHV basis), the total plant cost (TPC) is 3,786 US$/kW, and the COE is 160 US$/MWh.


2014 ◽  
Author(s):  
◽  
Rodolfo Lacy Tamayo

Early projects of Carbon Capture, Use and Geological Storage (CCUS) could be feasible when fossil fuel-power plants are close to oil and gas reservoirs where CO2-Enhanced Oil Recovery (EOR) technologies are applicable. This Thesis includes estimates for greenhouse gas (GHG) emissions caused in a hypothetical CCUS case with a Natural Gas Combined Cycle power plant (NGCC), which were obtained by using Life-Cycle Assessment (LCA) methodology. This research comprises a comparison with other electricity-generation technologies, including Super Critical Pulverized Carbon (SCPC), NGCC without CO2 capture, geothermal, mini-hydro, wind and nuclear ones. The LCA stages that were undertaken in this study were natural gas supply system, electricity generation, CO2 capture, CO2 transport, EOR operations and environmental monitoring. Three different functional units were used in this study: MJ, kWh and produced oil barrel (bbl). Results indicate that energy produced by the described CCUS system has an environmental impact on climate change of 0.044 kgCO2e/MJ. The NGCC power plant with carbon capture unit would produce 0.177 kgCO2e/kWh, representing about 21% and 36% of the estimated values for the SCPC and NGCC (without CCS) cases respectively, and about 24% less greenhouse gas emissions than the geothermal scenario. The oil produced in the EOR activity has a greenhouse gas emissions of 38 kgCO2e/bbl, 37% less than the historical average in the US. In a “well to well” approach, closing the carbon cycle during primary energy production may become a competitive technology to renewable energy sources.


2011 ◽  
Vol 4 ◽  
pp. 1385-1394 ◽  
Author(s):  
Sebastian Linnenberg ◽  
Ulrich Liebenthal ◽  
Jochen Oexmann ◽  
Alfons Kather

Author(s):  
S. Can Gülen ◽  
Chris Hall

This paper describes a gas turbine combined cycle (GTCC) power plant system, which addresses the three key design challenges of postcombustion CO2 capture from the stack gas of a GTCC power plant using aqueous amine-based scrubbing method by offering the following: (i) low heat recovery steam generator (HRSG) stack gas temperature, (ii) increased HRSG stack gas CO2 content, and (iii) decreased HRSG stack gas O2 content. This is achieved by combining two bottoming cycle modifications in an inventive manner, i.e., (i) high supplementary (duct) firing in the HRSG and (ii) recirculation of the HRSG stack gas. It is shown that, compared to an existing natural gas-fired GTCC power plant with postcombustion capture, it is possible to reduce the CO2 capture penalty—power diverted away from generation—by almost 65% and the overall capital cost ($/kW) by about 35%.


2012 ◽  
Vol 59 (3) ◽  
pp. 343-360 ◽  
Author(s):  
Andrzej Witkowski ◽  
Mirosław Majkut

The aim of this paper is to analyze various CO2 compression processes for postcombustion CO2 capture applications for 900 MW pulverized coal-fired power plant. Different thermodynamically feasible CO2 compression systems will be identified and their energy consumption quantified. A detailed thermodynamic analysis examines methods used to minimize the power penalty to the producer through integrated, low-power compression concepts. The goal of the present research is to reduce this penalty through an analysis of different compression concepts, and a possibility of capturing the heat of compression and converting it to useful energy for use elsewhere in the plant.


2019 ◽  
Vol 3 (1) ◽  
pp. 1
Author(s):  
Atika Atika ◽  
Basri Modding ◽  
Baharuddin Sammaila ◽  
Hamzah Hafied

<p>The apparatus performance is a fundamental problem affecting the organizational performance of West Sulawesi Province Government. Many factors affect it, both individual characteristics and organizational, especially commitment, leadership, compensation and job satisfaction. This study analyzes the effect of organizational commitment, leadership and compensation on job satisfaction and the impact on apparatus performance. The study was conducted on 358 respondents of Government apparatus in West Sulawesi Province. The data was collected by five point Likert scale and analyzed by Structural Equation Model (SEM). The study results found that commitment and leadership affect on job satisfaction and apparatus performance. While compensation only affects job satisfaction and does not affect on performance apparatus.</p>


2021 ◽  
pp. 1-28
Author(s):  
Bachir El Fil ◽  
Dhruv C. Hoysall ◽  
Srinivas Garimella

Abstract The impact of post-combustion carbon dioxide capture on the performance of a power plant is evaluated. A model of a coal power plant with post-combustion temperature swing adsorption CO2 capture using sorbent-loaded hollow fibers is presented. The resulting performance and cost of carbon capture are compared with those of other adsorption-based technologies. A parametric analysis of the performance of the power plant with respect to key parameters in the hollow fiber module operation is presented. It is found that electrical energy consumption for the compression of CO2 is a major parasitic load common to all absorption technologies and accounts for almost half of the total parasitic load. The effect of source temperature, flue gas fan and coupling fluid pump flow rates on overall system performance is presented. The impacts of different carbon capture technologies on the same coal-fired power plant are compared. Hollow fiber modules had the lowest parasitic load on the power plant, followed by KS-2 based carbon capture.


2014 ◽  
Vol 25 (8) ◽  
pp. 1148-1173 ◽  
Author(s):  
Shyong Wai Foon ◽  
Milé Terziovski

Purpose – The purpose of this paper is to examine the impact of operations and maintenance (O&M) practices, individually and collectively, on power plant performance. Design/methodology/approach – Data were collected from more than 100 power plants in Australia and Malaysia. The reliability and validity (content, construct, and criterion) of the practice and performance measures were evaluated. Findings – Committed leadership and maintenance-oriented practices as part of a total productive maintenance (TPM) philosophy were found to be the main differentiators between high and low performing plants. Research limitations/implications – The research is cross-sectional in nature, therefore, it does not permit us to account for the lag between implementation and performance. Second, the performance measures are subjective and may be subject to response bias. Practical implications – The implication of the research findings for plant managers is that they need to allocate more “softer” resources to the O&M function if they expect high plant availability. Social implications – Apart from capacity and fuel cost, operating costs are an important source of differentiation for power plants. The implication is that reduction in operating costs is directly related to the reduction of consumer power bills. Originality/value – The reader will learn from this paper that committed leadership and maintenance-oriented practices have greater explanatory power in the regression models than employee involvement, customer focus, strategic planning, and knowledge management. This knowledge is important because it emphasises that in addition to quality management practices, which are focussed on the development of the people aspects of the organization, the plant equipment and physical assets should also be given equal emphasis, in order to improve operational performance of power plants.


Sign in / Sign up

Export Citation Format

Share Document