scholarly journals Removal of Procion Red MX- 5B from aqueous solution by adsorption on Parkia speciosa (stink bean) peel powder

2019 ◽  
Vol 10 (1) ◽  
pp. 4774-4779
Keyword(s):  
Functional Groups ◽  
Dye Removal ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Infrared Spectrometry ◽  
Equilibrium Studies ◽  
Azo Compound ◽  
Stretch Vibration ◽  
Pseudo Second Order ◽  
Stretching Vibrations

The potential of Parkia speciosa peel (SBP) for removal of procion red mx-5B (PR) through the adsorption process was investigated. PR is a type of azo dye which is toxic to the environment especially in water. Sustainable adsorbents such as agricultural wastes have been promising to reduce the amount of pollution in wastewater due to their accessibility and more economic. The batch study was performed to examine the influence of varies exploratory conditions by fluctuating the dosage, adsorption time, and initial concentration. The main functional groups involved in the dye removal were analysed by Fourier transform infrared spectrometry (FTIR). The isotherm data were examined by the Langmuir, Freundlich and Temkin models. The result showed the equilibrium studies were perfectly associated by the Freundlich isotherm with R2= 0.9993, 0.9786 and 0.9728 for 1, 3 and 5 g of adsorbent dosage that corresponded with pseudo-second-order at a rate constant of 1x10-3/min. The FTIR spectrum of SBP after adsorption showed that changing of the functional groups of PR was presented by the stretch vibration of amine N-H and aromatic C=C, stretching vibrations for azo compound N=N. The remarkable data attained that the stink bean peel can be used as an alternative biosorbent for the removal of organic pollutants including the textile effluent industry.

scholarly journals Removal of triphenylmethane dye from aqueous solutions through an adsorption process over waste materials

2020 ◽  
Vol 10 (4) ◽  
pp. 5772-5779
Keyword(s):  
Adsorption Isotherm ◽  
Adsorption Capacity ◽  
Dye Removal ◽  
Functional Group ◽  
Adsorption Process ◽  
Removal Rate ◽  
Freundlich Isotherm ◽  
Second Order ◽  
Pseudo Second Order ◽  
Best Fit

Water pollution is the most significant issue due to rapid growing industrial development especially textile dye industry. Therefore, the adsorption process experiment was conducted to determine the removal ability of the adsorbent chosen. The removal rate and adsorption capacity of Phenol red and Cresol were analyzed by using eggshell adsorbent in the adsorption process. The experiment was conducted with parameters of initial concentration, dosage, pH and contact time. Results indicated that the removal rate achieved more than 90% and the adsorption capacity exceeded more than 5 mg/g. The functional group before adsorption process eggshell adsorbent and after adsorption process eggshell adsorbent was analyzed by using FTIR (Fourier Transform Infrared Spectroscopy). The study of adsorption isotherm and kinetics model was carried out to identify the efficiency of the eggshell adsorbent reacting with the dye solution. The adsorption isotherm that applied in this research was Langmuir isotherm, Jovanovic isotherm and Freundlich isotherm. Moreover, Pseudo-first-order and Pseudo-second-order chosen were conducted to determine the kinetic studies. In short, eggshell adsorbent is highly effective on dye removal through adsorption capacity. The functional group of the eggshell adsorbent was found such as alcohols, phenol, alkanes, carbonyls, ester, saturated aliphatic, aldehydes, aromatics, 2°amines and phosphorus. For kinetics study, Freundlich isotherm was analyzed as the best fit isotherm model as it achieved the highest R2 value which is closed to 1 and Pseudo-second-order was analyzed as the best fit kinetic model in this experiment. Therefore, eggshell adsorbent is highly effective in dye removal.

scholarly journals Investigation of competitive adsorption and desorption of heavy metals from aqueous solution using raw rock: Characterization kinetic, isotherm, and thermodynamic

2021 ◽  
Vol 348 ◽  
pp. 01016
Author(s):  
Rajaa Bassam ◽  
Marouane El Alouani ◽  
Nabila Jarmouni ◽  
Jabrane Maissara ◽  
Mohammed El Mahi Chbihi ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Langmuir Model ◽  
Second Order ◽  
Isotherm Models ◽  
Desorption Process ◽  
Pseudo Second Order ◽  
Rock Characterization ◽  
Metals Adsorption

Heavy metals are the most dangerous inorganic pollutants Due to their bioaccumulation and their nonbiodegradability, for this, several studies have focused on the recovery of these metals from water using different techniques. In this context, our study consists of evaluating an efficient and eco-friendly pathway of competitive recovery of heavy metals (Cd, Cr and As) from aqueous solutions by adsorption using raw rock. This adsorbent was characterized before and after the adsorption process by several techniques. The multi-metals adsorption process in the batch mode was undertaken to evaluate the effect of adsorbent mass, contact time, pH, Temperature, and initial heavy metals concentration. The kinetic data were analyzed using the pseudo-first-order, pseudo-second-order and intra-particle diffusion kinetic models. According to the modeling of the experimental results, the adsorption kinetics of heavy metals were adapted to the pseudo-second-order model. The adsorption isotherms were evaluated by the Langmuir and Freundlich isotherm models. The experimental isotherm data of heavy metals were better fitted with the Langmuir model rather than Freundlich isotherm models. The maximum experimental adsorption capacities (Qmax) predicted by the Langmuir model are 15.23 mg/g for Cd (II), 17.54 mg/g for Cr (VI) and 16.36 mg/g for As (III). The values of thermodynamic parameters revealed that the heavy metals adsorption was exothermic, favorable, and spontaneous in nature. The desorption process of heavy metals showed that this raw rock had excellent recycling capacity. Based on the results, these untreated clays can be used as inexpensive and environmentally friendly adsorbents to treat water contaminated by heavy metals.

scholarly journals ADSORPTION AND KINETIC STUDIES OF A NATURAL DYE FROM CURCUMA LONGA L., ONTO BAMBOO YARN

2017 ◽  
Vol 2 (1) ◽  
pp. 13-26
Author(s):  
Tengku Khamanur Azma Tg. Mohd Zamri ◽  
Mimi Sakinah Abd Munaim ◽  
Zularisam Ab Wahid
Keyword(s):  
Adsorption Process ◽  
Regression Coefficient ◽  
Curcuma Longa ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Natural Dye ◽  
Isotherm Models ◽  
Order Model ◽  
Dyeing Process ◽  
Pseudo Second Order

Natural dye extracted from the rhizome of Curcuma longa L. were applied to bamboo yarns using exhaustion dyeing process. This study investigates the dyeing behaviour of Curcumin; the major color component isolated from rhizomes of Curcuma longa L.on bamboo yarn. Langmuir, Freundlich, Tempkin and Dubinin-Radushkevich isotherm models were used to test the adsorption process of curcumin on bamboo yarn. Comparison of regression coefficient value indicated that the Freundlich isotherm most fitted to the adsorption of curcumin onto bamboo yarn. Furthermore, the kinetics study on this research fitted the pseudo-second order model which indicates that the basis of interaction was chemical adsorption.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

Mathematical Modelling for Copper and Lead Adsorption on Coffee Grounds

2017 ◽  
Author(s):  
Jurgita Seniūnaitė ◽  
Rasa Vaiškūnaitė ◽  
Kristina Bazienė
Keyword(s):  
Heavy Metals ◽  
Mathematical Modelling ◽  
Adsorption Kinetics ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Coffee Grounds ◽  
Pseudo Second Order

Research studies on the adsorption kinetics are conducted in order to determine the absorption time of heavy metals on coffee grounds from liquid. The models of adsorption kinetics and adsorption diffusion are based on mathe-matical models (Cho et al. 2005). The adsorption kinetics can provide information on the mechanisms occurring be-tween adsorbates and adsorbents and give an understanding of the adsorption process. In the mathematical modelling of processes, Lagergren’s pseudo-first- and pseudo-second-order kinetics and the intra-particle diffusion models are usually applied. The mathematical modelling has shown that the kinetics of the adsorption process of heavy metals (copper (Cu) and lead (Pb)) is more appropriately described by the Lagergren’s pseudo-second-order kinetic model. The kinetic constants (k2Cu = 0.117; k2Pb = 0,037 min−1) and the sorption process speed (k2qeCu = 0.0058–0.4975; k2qePb = 0.021–0.1661 mg/g per min) were calculated. After completing the mathematical modelling it was calculated that the Langmuir isotherm better reflects the sorption processes of copper (Cu) (R2 = 0.950), whilst the Freundlich isotherm – the sorption processes of lead (Pb) (R2 = 0.925). The difference between the mathematically modelled and experimen-tally obtained sorption capacities for removal of heavy metals on coffee grounds from aqueous solutions is 0.059–0.164 mg/l for copper and 0.004–0.285 mg/l for lead. Residual concentrations of metals in a solution showed difference of 1.01 and 0.96 mg/l, respectively.

Adsorption of Th(IV) on the modified multi-walled carbon nanotubes using central composite design

2019 ◽  
Vol 107 (5) ◽  
pp. 377-386 ◽  
Author(s):  
Cansu Endes Yılmaz ◽  
Mahmoud A.A. Aslani ◽  
Ceren Kütahyalı Aslani
Keyword(s):  
Carbon Nanotubes ◽  
Central Composite Design ◽  
Contact Time ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Thorium Concentration ◽  
Multi Walled Carbon Nanotubes ◽  
Pseudo Second Order ◽  
Walled Carbon Nanotubes ◽  
Central Composite

Abstract Adsorption of thorium onto nitric acid modified multi-walled carbon nanotubes was investigated by central composite design as a function of contact time, pH, initial thorium concentration and temperature. The results showed that optimum uptake capacity was 65.75±2.23 mg·g−1 with respect to pH=4, initial thorium concentration of 100 mg·L−1, 25 °C and 15 min contact time. Thermodynamic parameters [standard enthalpy (ΔH0), entropy (ΔS0), and free energy (ΔG0)] were calculated, and the results indicated that adsorption was endothermic. Langmuir, Freundlich and Dubinin-Radushkevich isotherms have been investigated in order to characterize the adsorption process in the range of 25–100 mg·L−1 initial thorium concentration. The Freundlich isotherm is the best suited as a model because it has the highest correlation coefficient (R2=0.9485). The pseudo-second order kinetics well defined the adsorption process.

scholarly journals Baker’s yeast-MnO2 composites as biosorbent for Malachite green: An ecofriendly approach for dye removal from aqueous solution

2018 ◽  
Vol 14 (1) ◽  
pp. 1
Author(s):  
Bruna Assis Paim dos Santos ◽  
Aline Silva Cossolin ◽  
Hélen Cristina Oliveira dos Reis ◽  
Ketinny Camargo de Castro ◽  
Evanleide Rodrigues da Silva ◽  
...  
Keyword(s):  
Aqueous Solution ◽  
Malachite Green ◽  
Dye Removal ◽  
Adsorption Process ◽  
Baker’S Yeast ◽  
Baker's Yeast ◽  
Direct Oxidation ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Biomass Dosage

In this study, baker’s yeast-MnO2 composites, produced by direct oxidation of yeast with KMnO4 under acidic conditions, were used as biosorbent to remove the triphenylmethane dye Malachite green (MG) from an aqueous solution. Parameters that influence the adsorption process, such as pH, contact time, temperature, initial dye concentration and biosorbent dosage, were evaluated in batch experiments. The optimum removal of MG was found to be  86.7 mg g-1 at pH 10, 1.0 g L-1 of biomass dosage and 45°C. The kinetic data of dye removal was better described by the pseudo-second-order model. The adsorption process followed the Langmuir isotherm model and the maximum biosorption capacity was estimated to be  243.9 mg g-1 (at 25°C). The negative values of ∆G° and the positive value of ∆H° indicated that the MG biosorption onto yeast-MnO2 composites is spontaneous and endothermic. Fourier transform infrared spectroscopy (FTIR) indicated that the nano-MnO2 particles deposited on yeast-MnO2 composites surface facilitated the MG adsorption. It was concluded that baker’s yeast-MnO2 composites have potential for application as adsorbent for removal of MG from aqueous solution.

scholarly journals Construction of Novel Polymerizable Ionic Liquid Microemulsions and the In Situ Synthesis of Poly(Ionic Liquid) Adsorbents

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 454 ◽  
Author(s):  
Aili Wang ◽  
Shuhui Li ◽  
Hou Chen ◽  
Ying Liu ◽  
Xiong Peng
Keyword(s):  
Ionic Liquid ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
In Situ Synthesis ◽  
Scattering Data ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ionic Liquid

This paper reports the successful construction of novel polymerizable ionic liquid microemulsions and the in situ synthesis of poly(ionic liquid) adsorbents for the removal of Zn2+ from aqueous solution. Dynamic light-scattering data were used to confirm the polymerization media and to illustrate the effect of the crosslinker dosage on the droplet size of the microemulsion. FTIR and thermal analysis were employed to confirm the successful preparation of the designed polymers and characterize their thermostability and glass transition-temperature value. The optimization of the adsorption process indicates that the initial concentration of Zn2+, pH, adsorbent dosage and contact time affected the adsorption performance of poly(ionic liquid)s toward Zn2+. Furthermore, our research revealed that the adsorption process can be effectively described by the pseudo second-order kinetic model and the Freundlich isotherm model.

scholarly journals Kinetic and equilibrium studies on the adsorption of Direct Red 23 dye from aqueous solution using montmorillonite nanoclay

2019 ◽  
Vol 55 (2) ◽  
pp. 132-144 ◽  
Author(s):  
Amir Hossein Mahvi ◽  
Arash Dalvand
Keyword(s):  
Dye Removal ◽  
Textile Wastewater ◽  
Order Kinetic ◽  
Equilibrium Studies ◽  
Batch System ◽  
Adsorbate Concentration ◽  
Pseudo Second Order ◽  
Direct Dye ◽  
Decreasing Ph ◽  
Montmorillonite Nanoclay

Abstract In this research, the adsorption of the Direct Red 23 dye from synthetic textile wastewater using nanoclay was studied in a batch system. The properties of nanoclay were investigated by scanning electron microscope, Fourier transform infrared, and EDX analysis. The specific surface area of the nanoclay was determined using Sear's method. The results revealed that with increasing adsorbent dose and contact time and decreasing pH, ionic strength, and adsorbate concentration, dye removal efficiency has increased. Nanoclay could remove 99.4% dye from the solution containing 50 mg/L dye at 30 min. The results indicated that dye removal followed pseudo-second-order kinetic (R2 > 0.99) and the Langmuir isotherm. According to the findings, nanoclay is an effective adsorbent for direct dye removal from wastewater.

scholarly journals Adsorption of Direct Blue 78 Using Chitosan and Cyclodextrins as Adsorbents

Polymers ◽  
2019 ◽  
Vol 11 (6) ◽  
pp. 1003 ◽  
Author(s):  
Ainoa Murcia-Salvador ◽  
José A. Pellicer ◽  
María I. Fortea ◽  
Vicente M. Gómez-López ◽  
María I. Rodríguez-López ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Advanced Oxidation Process ◽  
Freundlich Isotherm ◽  
Maximum Adsorption Capacity ◽  
Direct Blue ◽  
Complementary Action ◽  
Coupled Process ◽  
Kinetic Tests ◽  
Equilibrium Data ◽  
Pseudo Second Order

The dyeing industry is one of the most polluting in the world. The adsorption of dyes by polymeric matrixes can be used to minimize the discharge of dyes into the environment. In the present study, chitosan-NaOH and β-cyclodextrin-epichlorohydrin polymers were used to remove the dye Direct Blue 78 from a wastewater model. To understand the adsorption behavior of Direct Blue 78 onto the polymers, adsorption rate and maximum adsorption capacity were calculated using kinetic tests and isotherm curves respectively. The kinetic data and mechanism of the adsorption process were analyzed by three models and the equilibrium data by three adsorption isotherms; also the different thermodynamic parameters were calculated. Results showed that the adsorption process follows pseudo-second-order kinetics in both polymers and the Langmuir isotherm best-fitted data for chitosan-NaOH polymer and the Freundlich isotherm for the β-CDs-EPI polymer. The adsorption process is exothermic in both cases and spontaneous for the β-CDs-EPI polymer to a certain temperature and not spontaneous for the chitosan-NaOH polymer and β-CDs-EPI polymer at higher temperatures. The complementary action of an advanced oxidation process eliminated >99% of the dye from water. The coupled process seems to be suitable for reducing the environmental impact of the dyeing industry.

Sign in / Sign up

Export Citation Format

Share Document