scholarly journals Modelling the influence of gaseous products of explosive detonation on the processes of crack treatment while rock blasting

2021 ◽  
Vol 15 (3) ◽  
pp. 102-107
Author(s):  
Viktoriia Kulynych ◽  
Valerii Chebenko ◽  
Ruslan Puzyr ◽  
Iryna Pieieva
Keyword(s):  
Rock Mass ◽  
Building Materials ◽  
Strength Properties ◽  
Solid Particles ◽  
Lead Azide ◽  
Rock Fragment ◽  
Rock Blasting ◽  
Detonation Products ◽  
Gaseous Products ◽  
Explosive Detonation

Purpose is mathematical modeling of fracturing as well as influence of gaseous products of explosive detonation on the changes in rock strength. Methods. Mathematical model, using foundations of Griffith theory, has been developed. To explain conditions of bridge formation while exploding lead azide charges, a two-stage description of solid particle condensation at a crack surface and inside it has been applied using the smoothed particle hydrodynamics. The analysis, involved electronic microscope, has helped verified the results experimentally. Findings. The effect of rock mass disturbance, resulting from explosive destruction, is manifested maximally right after the action. Subsequently, it decreases owing to the gradual relaxation of the formed defects. Therefore, an urgent problem is to develop ways slowing down strength restore of the blasted rock mass fragments. The process of rock fragment strength restoring may be prevented by microparticles getting into the microcrack cavities together with the detonation products. The research simulates their action. The data correlate to the simulation results confirming potential influence of the blasted rock on the dynamics of changes in the strength characteristics of the rock mass. Various compositions of charges with shells made of inert solid additions have been applied which solid particles can avoid the process of microcrack closure. Originality. For the first time, the possibility of deposition formation within rock micro- and macrocracks has been proposed and supported mathematically. Practical implications. Strength properties of the finished product and the energy consumption during impulse loading as well as subsequent mechanical processing of nonmetallic building materials depend on the strength properties of rock mass fragments. Hence, the ability to control the strength restore has a great practical value. Moreover, it can be implemented during the blasting operations.

General concept of determining the parameters of non-mining walls of ultra-deep diamond deposits development open pits

2021 ◽  
pp. 48-53
Author(s):  
I. V. Zyryanov ◽  
A. N. Akishev ◽  
I. B. Bokiy ◽  
N. M. Sherstyuk
Keyword(s):  
Rock Mass ◽  
Structural Relaxation ◽  
Slope Angle ◽  
Field Tests ◽  
Friction Angle ◽  
Strength Properties ◽  
Strength Characteristics ◽  
Open Pit ◽  
Open Pit Mining ◽  
Relaxation Coefficient

A specific feature of open pit mining of diamond deposits in Western Yakutia is the construction of the open pits in the zone of negative ambient temperatures, which includes thick permafrost rock mass, and which is at the same time complicated by the influence of cryogenic processes on deformation of pit wall benches. The paper presents the comparative analysis of strength characteristics in frozen and thawed rocks, stability of benches during mining, the general geomechanical approach to the determination of parameters of non-mining walls of the ultra-deep open pit diamond mines, and the parameters of nonmining walls and benches. Optimization of open pit wall configuration should primarily be based on the maximum utilization of the strength properties of frozen rocks in combination with the development of new approaches, calculation schemes and methods for assessing stability of open pit walls and benches of unconventional design, including the non-mining vertical benches. The main design characteristic that determines the parameters of open pit walls is the structural tectonic relaxation coefficient, which specifies the calculated value of cohesion in rock mass. For the diamond deposits, the values of the structural relaxation coefficient were obtained in a series of field tests and back calculations. Full-scale tests were carried out both during exploration operations in underground mines and in open pits. The accuracy of determining the values of the structural relaxation coefficient in the range of 0.085–0.11 is confirmed by the parameters of non-mining walls in an open pit mine 385–640 m deep, with overall slope angles of 38–55° and a steeper H 0.35–0.5 lower part having the slope angle of up to 70° with average strength characteristics of 7.85–11.84 MPa and the internal friction angle of 28.1–37.4°. Using the natural load-bearing capacity of rock mass to the full advantage, which the values of the structural relaxation coefficient of deposits show, allows optimization of open pit wall slope design and minimization of stripping operations.

A New Experimental Field Study of the Effects of Explosive Detonation Products on Seismic Radiation

2017 ◽  
Vol 88 (5) ◽  
pp. 1327-1332 ◽  
Author(s):  
Anastasia Stroujkova ◽  
Mark Leidig ◽  
James Lewkowicz ◽  
Timothy Rath ◽  
Timothy Bradstreet ◽  
...  
Keyword(s):  
Field Study ◽  
Detonation Products ◽  
Experimental Field ◽  
Explosive Detonation

Strength Properties of Activated Hwangtoh Mortars

2010 ◽  
Vol 168-170 ◽  
pp. 709-715
Author(s):  
Dongsik Oh ◽  
Doheom Song ◽  
Seongseok Go
Keyword(s):  
Compressive Strength ◽  
Blast Furnace ◽  
Blast Furnace Slag ◽  
Building Materials ◽  
Strength Properties ◽  
Mixing Conditions ◽  
Substitution Ratio ◽  
Pozzolanic Properties ◽  
The Relationship ◽  
Furnace Slag

Hwangtoh (loess) has pozzolanic properties that mean it can be used as a cement admixture when activated at high temperatures, and that it can be used in combination with building materials such as fly ash or blast furnace slag. This study aimed to analyze the relationship between the compressive strength and the brick bond strength of various mortars containing hwangtoh, and also to find the optimum mixing conditions for the use of hwangtoh. It was found that the mortars’ strength properties are significantly influenced by the water/cement ratio W/C and the activated hwangtoh substitution ratio. We recommend the following materials and mixing conditions: W/C 60%, a cement substitution ratio of activated hwangtoh of 20 ~ 25%, and the addition of 10% blast furnace slag to improve the compressive strength of such mortars.

scholarly journals Concrete based on sulfur binder being modified with inorganic additives

2018 ◽  
Vol 212 ◽  
pp. 01013
Author(s):  
Vadim Balabanov ◽  
Victor Baryshok ◽  
Nikita Epishkin
Keyword(s):  
Frost Resistance ◽  
Building Materials ◽  
Physical And Mechanical Properties ◽  
High Strength ◽  
Strength Properties ◽  
Climatic Conditions ◽  
Freezing And Thawing ◽  
Concrete Mixtures ◽  
Irkutsk Region ◽  
Water Saturated

The sharply continental climate of the Irkutsk region is characterized by wide temperature intervals throughout the year. The repeated cyclicity of freezing and thawing of building materials in the water-saturated state influences the change in technical characteristics and the durability of concrete products and structures. The concrete products’ features in such climatic conditions create the need for the production of concretes with improved indicators of physical and mechanical properties. The effect of modifying additives on the technological characteristics of sulfur concrete is established. The effect of all elements of sulfur concrete on its strength and frost resistance. The composition of sulfuric concrete is obtained, which meets all the requirements and also has high strength and increased frost resistance. Formulations with a certain ratio of structural sulfuric concrete mixtures were developed. As a result of the use of technical sulfur in the composition of concrete products, the problem of utilizing annually accumulating reserves of technical sulfur is partially solved. The strength properties of sulfuric concretes easily compete with high-quality brands of concrete, special types of concretes that have in their composition additives.

scholarly journals Impact of Elevated Temperatures on Strength Properties and Microstructure of Calcium Sulfoaluminate Paste

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6751
Author(s):  
Konrad A. Sodol ◽  
Łukasz Kaczmarek ◽  
Jacek Szer ◽  
Sebastian Miszczak ◽  
Mariusz Stegliński
Keyword(s):  
Compressive Strength ◽  
Building Materials ◽  
Elevated Temperatures ◽  
Cooling System ◽  
Base Material ◽  
Visual Assessment ◽  
Strength Properties ◽  
Strength Parameters ◽  
Calcium Sulfoaluminate ◽  
Wide Range

This article is motivated by civil fire safety. Fire-prevention engineering demands a wide range of information about building materials including alternative cements, for instance CSA-cement. Because of exposure of the cement-base material to a high temperature, its strength properties deteriorate due to dehydration connected with phase and microstructure changes. Previous research indicated that the main endothermic reaction of CSA-based composite, dehydration of ettringite, might be used as a cooling system for a metal structure during fire-load. This article examines visual assessment, microstructure, density, as well as flexural and compressive strength parameters of CSA-based composite after isothermal heating at temperatures from 23 °C to 800 °C. The results of SEM/EDS investigations showed that the calcium sulfoaluminate paste may start partially re-sintering above 600 °C. Mechanical tests revealed significant reduction of strength parameters but residual compressive strength was maintained in the whole temperature range e.g., 8 MPa at 800 °C. Additionally, visual assessment of the specimens indicated that it might be possible to predict the material temperature heating based on the specific surface color. These findings add to the evidence of general knowledge about CSA hydrates.

scholarly journals Effect of 3D Printed Spatial Reinforcement on Flexural Characteristics of Conventional Mortar

Materials ◽  
2020 ◽  
Vol 13 (14) ◽  
pp. 3133
Author(s):  
Jacek Katzer ◽  
Tomasz Szatkiewicz
Keyword(s):  
Building Materials ◽  
Mechanical Performance ◽  
Cement Mortar ◽  
Research Effort ◽  
Reinforce Concrete ◽  
Strength Properties ◽  
Fourth Decade ◽  
3D Printed ◽  
Spatial Shape ◽  
Manufacturing Technologies

In their fourth decade of development, additive manufacturing technologies are slowly entering research programs dedicated to building materials. While the majority of research effort is focused on using 3D printing of concrete, the authors propose using the technology for creation of spatial plastic reinforcement. Obviously, the strength properties of a 3D printed polymer are much lower than those of steel. Nevertheless, the unconventional spatial shape of a 3D printed reinforcement can substitute for much of the lower mechanical performance of polymer. Flexural characteristics of a cement mortar prism specimen reinforced by hexagon spatial elements were tested and analyzed in this paper. The hexagonal geometric shape was chosen due to its high rigidness. It was proven that it is possible to efficiently reinforce concrete beams by spatial 3D printed polymer elements. Directions of needed research were pointed and discussed.

Ceramic Composition Material with Mullite Crystals Obtained from the Clayy Raw Material of Yakutia

2020 ◽  
Vol 992 ◽  
pp. 253-258
Author(s):  
M.P. Lebedev ◽  
V.N. Tagrov ◽  
E.S. Lukin
Keyword(s):  
Building Materials ◽  
Raw Materials ◽  
Practical Interest ◽  
Physical And Mechanical Properties ◽  
Ceramic Materials ◽  
Strength Properties ◽  
Raw Material ◽  
Composition Material ◽  
Material Base ◽  
Wide Range

The article deals with the manufacture of modern structural ceramic materials from clay and loam deposits of the Republic of Sakha (Yakutia). The importance and relevance of the development of the production of building materials from local raw materials is emphasized, since this will certainly affect the effectiveness of the construction complex as a whole. The successful development of the construction complex is capable of not only stimulating growth in all sectors of the economy, but also contributes to solving the most pressing social problems. Today, Yakutia has huge reserves of mineral raw materials for the production of a wide range of building materials and products. Of practical interest are wall materials made from clay soils. Given the features of the region’s raw material base, this work focuses on additional processing of traditional material. Controlling the complex physicochemical and structural-mechanical transformations that occur during heat treatment, a methodology has been developed for creating a composite material that will allow competitive innovative materials with enhanced strength properties to be produced with a reinforcing element with a glassy phase matrix of mullite crystals. The fabricated samples have a wide range of physical and mechanical properties and allow using it as a high-quality structural building ceramics, as well as industrial floor technical tile.

Expansion of the detonation products of lead azide via a supersonic nozzle

Shock Waves ◽  
1994 ◽  
Vol 4 (1) ◽  
pp. 11-14
Author(s):  
Y. Tzuk ◽  
I. Bar ◽  
S. Rosenwaks
Keyword(s):  
Supersonic Nozzle ◽  
Lead Azide ◽  
Detonation Products

scholarly journals Numerical Modeling for Engineering Analysis and Designing of Optimum Support Systems for Headrace Tunnel

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Sajjad Hussain ◽  
Zahid Ur Rehman ◽  
Noor Mohammad ◽  
Muhammad Tahir ◽  
Khan Shahzada ◽  
...  
Keyword(s):  
Rock Mass ◽  
Support Systems ◽  
Research Work ◽  
Strength Properties ◽  
Efficient Design ◽  
Headrace Tunnel ◽  
And Performance ◽  
Selection Of

The empirical and numerical design approaches are considered very important in the viable and efficient design of support systems, stability analysis for tunnel, and underground excavations. In the present research work, the rock mass rating (RMR) and tunneling quality index (Q-system) were used as empirical methods for characterization of rock mass based on real-time geological and site geotechnical data and physical and strength properties of rock samples collected from the alignment of tunnel. The rock mass along the tunnel axis was classified into three geotechnical units (GU-1, GU-2, and GU-3). The support systems for each geotechnical unit were designed. The 2D elastoplastic finite-element method (FEM) was used for the analysis of rock mass behavior, in situ and redistribution stresses, plastic thickness around the tunnel, and performance of the design supports for the selection of optimum support system among RMR and Q supports for each geotechnical unit of tunnel. Based on results, Q support systems were found more effective for GU-1 and GU-2 as compared to RMR support systems and RMR support systems for GU-3 as compared to Q support systems.

Sign in / Sign up

Export Citation Format

Share Document