Research of Optical Radiation Impact on Materials of Museum Exhibits and Requirements to Measurement Devices

2019 ◽  
pp. 73-80
Author(s):  
Sergei S. Bayev ◽  
Vladimir N. Kuzmin ◽  
Konstantin A. Tomsky
Keyword(s):  
Acceptable Level ◽  
Light Sources ◽  
Led Lighting ◽  
Museum Exhibits ◽  
Fluorescent Lamps ◽  
Colour Measurements ◽  
Uv Irradiance ◽  
Measurement Devices ◽  
Special Studies

LED lighting creates capability of the best representation of museum exhibits and creation of additional light perception effects. It also allows us to use the results of light and colour measurements for adjustment of quantity and quality of lighting. Photometric devices may become permanent assistants in decoration of exhibitions and museum premises. Even more important are photometers for monitoring of acceptable level of illuminance and UV irradiance. With correct evaluation of adverse impact of LED lighting, there is an opportunity to significantly increase the permitted level of exhibits lighting, which is a permanent requirement by designers. The recommendations for standardisation of lighting are based on results of special studies performed with consideration of material light-resistance groups and properties of light sources. Such studies were performed by STE TKA, LLC, and GOSNIIRESTAVRATSII by request of the Ministry of Culture. The article describes major results of this study, which mainly aimed at specification of safe acceptable level of UV irradiation of materials with application of energy-saving fluorescent lamps as well as major characteristics of produced photometers. Similar studies and elaboration of recommendation are required also for LED light sources.

scholarly journals The light color quality of LED operating at winter temperatures

2019 ◽  
Vol 11 (4) ◽  
pp. 112 ◽  
Author(s):  
Przemysław Tabaka ◽  
Pawel Rozga
Keyword(s):  
Solid State ◽  
Operating Temperature ◽  
Solid State Lighting ◽  
Light Sources ◽  
Led Light ◽  
Fluorescent Lamps ◽  
Color Rendering ◽  
Incandescent Lamps ◽  
Colour Rendering

The paper presents the results of calculations of colorimetric parameters of LED sources operating at a temperature range from -25oC to 25oC. The chromaticity coordinates and color rendition quality parameters were calculated on the basis of registered spectral distributions of radiation. For individual LED chromaticity shift is illustrated at CIE 1931 x,y diagram with 3 step and 7 step MacAdam ellipses. Full Text: PDF ReferencesJ. P. Freyssinier, D. Frering, J. Taylor, N. Narendran, and P. Rizzo, Reducing lighting energy use in retail display windows. Sixth International Conference on Solid State Lighting, Proceedings of SPIE 6337, 63371L (2006). CrossRef Aman, M. M., et al., 2013. Analysis of the performance of domestic lighting lamps, Energy Policy, CrossRef E. Elijošiute, J. Balciukevičiute, G. Denafas, Life cycle assessment of; compact fluorescent and incandescent lamps: Comparative analysis. Environ Res. Eng. Manag. 61 (3), pp. 65-72, (2012), CrossRef D. Czyzewski, LED substitutes of conventional incandescent lamps Przeglad Elektrotechniczny R. 88, No. 11 (2012), CrossRef P. Tabaka, P. Rozga, Assessment of methods of marking LED sources with the power of equivalent light bulb, ulletin of the Polish Academy of Sciences. Technical Sciences, Vol. 65, No. 6, (2017) CrossRef I. Fryc, P. Jakubowski, K. Kołacz, Analysis of optical radiation parameters of compact discharge HID lamps and LED COB modules used for illuminating shop windows, Przeglad Elektrotechniczny,R. 93, No 11, (2017); pp. 186-189, CrossRef T. Kawabata, Y. Ohno; Optical measurements of OLED panels for lighting applications, pp 1176-1186 Jun 2013, Journal of Modern Optics, Vol. 60, 2013 Issue 14 CrossRef W. Żagan, Conditions necessary to replacing the conventional lamps by energy-saving lamps, Przeglad Elektrotechniczny R. 85, No. 5, pp. 100-104, (2009). DirectLink P. Tabaka; Influence of Ambient Temperature on Colour Properties of Low-Pressure Fluorescent Lamps, Light & Engineering, Vol. 23; No. 2; (2015). DirectLink W. R. Ryckaert, et al., Linear LED tubes versus fluorescent lamps: An evaluation. Energy Build. 49, pp. 429-436. CrossRef M. Zalesinska, J. Zablocka, K. Wandachowicz, Evaluation of Selected Parameters of Non-Directional Household Lamps, Conference: 2018 VII. Lighting Conference of the Visegrad Countries (Lumen V4), CrossRef I. Fryc; Measurement techniques of optical LEDs properties performed with compliance conformity with CIE 127:2007 standard, Przeglad Elektrotechniczny R. 85, No. 11, pp. 317-319, (2009) DirectLink IESNA, IES Approved Method: Measuring Lumen Maintenance of LED Light Sources. IES LM-80-08', IES Subcommittee on Solid-State Lighting of the IES Testing Procedures Committee (2018). DirectLink D. B. Judd, Estimation of chromaticity differences and nearest color temperature on the standard 1931 ICI colorimetric coordinate system. J. Opt. Soc. America 26 (11), 421, (1936) CrossRef CIE 177:2007 Colour Rendering of White LED Light Sources DirectLink CIE 13.3-1995 Method of Measuring and Specifying Colour. DirectLink CIE 224:2017 Colour Fidelity Index for accurate scientific use DirectLink CIE 15:2004 Colorimetry. DirectLink D. Mozysrska, M. Wyrwas, I. Fryc, The determination of the LEDs colorimetric parameters, in the range of their operating temperature, Przeglad Elektrotechniczny, R. 93, No. 4a, pp. 232-234, (2012). DirectLink J. Kowalska, Analysis of parameters describing the quality of the color rendering of light sources according to the IES TM-30-15 and the CIE 013.3-1995, Przeglad Elektrotechniczny, R. 93, No. 6; pp. 50-54, (2017) CrossRef J. Kowalska, I. Fryc, Colour rendition quality of typical fluorescent lamps determined by CIE Colour Fidelity Index and Colour Rendering Index, Przeglad Elektrotechniczny, R. 95, No. 7; (2019), pp. 94-97 CrossRef J. Kowalska, Ambiguity and limitations in determining the quality of the color rendering of light sources by index Ra (CIE CRI), Przeglad Elektrotechniczny, R. 93 No. 5, pp. 74-78, (2017) CrossRef I. Fryc, J. Fryc, A. Wasowski, Considerations about determining color rendering of light sources, Przeglad Elektrotechniczny, R. 92 No. 2, pp. 218-223, (2016) CrossRef I. Fryc, LED's spectral power distribution under different condition of operating temperature and driving current, Przeglad Elektrotechniczny, R. 86, No. 10, pp. 187-189, (2010). DirectLink A. David, P. Fini, K. Houser et al., Development of the IES method for evaluating the color rendition of light sources, Optics Express; Vol. 23; Issue 12, pp. 15888-15906, (2015). CrossRef K. Houser, M. Mossman, K. Smet et al, Tutorial, Color Rendering and Its Applications in Lighting, LEUKOS; Vol. 12, Issue 1-2; pp. 7-26; (2016). CrossRef

RESEARCH AND COMPUTER DESIGN LIGHTING INSTALLATIONS WITH LED LIGHTING DEVICES

2021 ◽  
pp. 39-45
Author(s):  
I. I. Bayneva ◽  
V. I. Shkarin
Keyword(s):  
Energy Efficiency ◽  
Energy Savings ◽  
Industrial Plant ◽  
Light Sources ◽  
Computer Design ◽  
Led Lighting ◽  
Fluorescent Lamps ◽  
The Face ◽  
Indoor Lighting ◽  
Led Lights

The article discusses the main issues of energy conservation in lighting in the face of a growing shortage of energy resources. Estimated reserves of energy savings in lighting. The urgent tasks of designing modern lighting make it possible to identify the most efficient light sources and lighting devices, ways to ensure energy and lighting savings, and ways to increase the energy efficiency of an industrial plant lighting system. The basic provisions for the use of LED lighting devices for lighting industrial premises are given. The requirements for artificial production lighting, regulated by various regulatory documents, are considered. The possibilities of DiaLux program for lighting modeling are analyzed. Lighting projects have been developed for various sections of the galvanic shop with LED lights in DIALux. A comparative analysis of the energy efficiency of indoor lighting projects using LED and fluorescent lamps demonstrates the obvious use of LED lighting devices for lighting industrial premises.

scholarly journals THE EFFECT OF ENERGY-EFFICIENT LIGHT SOURCES ON THE QUALITY OF ELECTRICITY

2016 ◽  
Vol 1 ◽  
pp. 38-48
Author(s):  
Volodymyr Andriychuk ◽  
Mykola Lypovetskyi ◽  
Myroslav Nakonechnyi ◽  
Serhiy Potalitsyn
Keyword(s):  
Power Factor ◽  
Energy Efficient ◽  
Power Factor Correction ◽  
Light Sources ◽  
Current Harmonics ◽  
Light Emitting ◽  
Fluorescent Lamps ◽  
Sinusoidal Current ◽  
Relative Errors

The paper analyzes the range of current from energy-efficient light sources (LSs), such as compact fluorescent lamps (CFLs) and light-emitting diodes (LEDs). The studied LSs exceed the standard values for the current harmonics, even with passive power factor correction. We have developed a methodology for calculating relative errors of active energy meters that measure the energy used by CFLs and LEDs and applied the methodology to determine the values of the relative errors of the induction and the digital meters. It is found that the errors of of both types of electricity meters for measuring power in the circuits with the tested LSs–CFLs and LEDs–exceed the maximum permissible errors by 3.0 % and 4.0 % respectively. Thus, when the load is a source of non-sinusoidal current, a consumer is overcharged for electricity. The values of errors in electricity metering can be reduced by eliminating the causes of the deteriorating quality of electricity, i.e. by supplying the lighting installations with energy-efficient light sources provided with active power factor correction.

Pengaruh Kualitas Pelayanan Terhadap Kepuasan Nasabah Tabungan Britama Pada Bank BRI Cabang Fatmawati

Liquidity ◽  
2018 ◽  
Vol 1 (1) ◽  
pp. 72-80
Author(s):  
Viva Faronika ◽  
Asriyal Asriyal
Keyword(s):  
Quality Of Service ◽  
Customer Satisfaction ◽  
Service Quality ◽  
Acceptable Level ◽  
Level Of Service ◽  
Level Of Satisfaction ◽  
Service Policies ◽  
Improve Service Quality ◽  
Relationship Of

If the customer is greater than acceptable level of service, the cutomer is not satisfied. Conversely, if an acceptable level of service greater than the expectations of customers, the customer will be satisfied. This means that if Bank BRI branch Fatmawati can improve service quality to its customer it will affect the level of satisfaction. In this research found evidence that, in terms of the creation of quality services, Bank BRI branch Fatmawati is one of the branches that participate to implement the established policies and service in accordance with the exiting service standard in the banking world. Amount of influence the determination of quality of service policies applied by the Bank BRI branch Fatmawati indicated by r2. r2 value only 45 % and the rest 55 % influenced by other variables not studied. Meanwhile, the variable relationship of service quality to customer satisfaction can be seen from the values r = 0,67. This shows the value of the correlation coefficient between the variables of service quality to customer satisfaction. This means there are strong relationships between the independent variable X (quality of service) to the dependent variable Y (customer satisfaction). Since r = 0,67 (67 %) greater then 50 %.

The Influence Of The Led Luminaires Electrical Parameters On Their Correlated Colour Temperature During Operation Mode

2020 ◽  
pp. 89-96
Author(s):  
Sergei S. Kapitonov ◽  
Alexei S. Vinokurov ◽  
Sergei V. Prytkov ◽  
Sergei Yu. Grigorovich ◽  
Anastasia V. Kapitonova ◽  
...  
Keyword(s):  
Operation Mode ◽  
Light Sources ◽  
Electrical Parameters ◽  
Colour Temperature ◽  
Radiation Spectra ◽  
Service Period ◽  
Close Proximity ◽  
Definition Of ◽  
Comprehensive Study

The article describes the results of comprehensive study aiming at increase of quality of LED luminaires and definition of the nature of changes in their correlated colour temperature (CCT) in the course of operation. Dependences of CCT of LED luminaires with remote and close location of phosphor for 10 thousand hours of operation in different electric modes were obtained; the results of comparison between the initial and final radiation spectra of the luminaires are presented; using mathematical statistics methods, variation of luminaire CCT over the service period claimed by the manufacturer is forecast; the least favourable electric operation modes with the highest CCT variation observed are defined. The obtained results have confirmed availability of the problem of variation of CCT of LED luminaires during their operation. Possible way of its resolution is application of more qualitative and therefore expensive LEDs with close proximity of phosphor or LEDs with remote phosphor. The article may be interesting both for manufacturers and consumers of LED light sources and lighting devices using them.

One-shot Multi-angle Measurement Device for Evaluating the Sparkle Impression

2020 ◽  
Vol 2020 (5) ◽  
pp. 60401-1-60401-8
Author(s):  
Shuhei Watanabe
Keyword(s):  
Spatial Frequency ◽  
Product Design ◽  
Angle Measurement ◽  
Observation Angle ◽  
Light Sources ◽  
Quantification Method ◽  
Material Appearance ◽  
Subjective Score ◽  
Measurement Devices ◽  
Rotation Stage

The quantification of material appearance is important in product design. In particular, the sparkle impression of metallic paint used mainly for automobiles varies with the observation angle. Although several evaluation methods and multi-angle measurement devices have been proposed for the impression, it is necessary to add more light sources or cameras to the devices to increase the number of evaluation angles. The present study constructed a device that evaluates the multi-angle sparkle impression in one shot and developed a method for quantifying the impression. The device comprises a line spectral camera, light source, and motorized rotation stage. The quantification method is based on spatial frequency characteristics. It was confirmed that the evaluation value obtained from the image recorded by the constructed device correlates closely with a subjective score. Furthermore, the evaluation value is significantly correlated with that obtained using a commercially available evaluation device.

scholarly journals Characterizing Color Quality, Damage to Artwork, and Light Intensity of Multi-Primary LEDs for Museums

Heritage ◽  
2021 ◽  
Vol 4 (1) ◽  
pp. 188-197
Author(s):  
Dorukalp Durmus
Keyword(s):  
Energy Efficiency ◽  
Appearance Model ◽  
Light Sources ◽  
Great Flexibility ◽  
Oil Paintings ◽  
Damage Reduction ◽  
Output Variability ◽  
Color Quality ◽  
Trade Offs

Light causes damage when it is absorbed by sensitive artwork, such as oil paintings. However, light is needed to initiate vision and display artwork. The dilemma between visibility and damage, coupled with the inverse relationship between color quality and energy efficiency, poses a challenge for curators, conservators, and lighting designers in identifying optimal light sources. Multi-primary LEDs can provide great flexibility in terms of color quality, damage reduction, and energy efficiency for artwork illumination. However, there are no established metrics that quantify the output variability or highlight the trade-offs between different metrics. Here, various metrics related to museum lighting (damage, the color quality of paintings, illuminance, luminous efficacy of radiation) are analyzed using a voxelated 3-D volume. The continuous data in each dimension of the 3-D volume are converted to discrete data by identifying a significant minimum value (unit voxel). Resulting discretized 3-D volumes display the trade-offs between selected measures. It is possible to quantify the volume of the graph by summing unique voxels, which enables comparison of the performance of different light sources. The proposed representation model can be used for individual pigments or paintings with numerous pigments. The proposed method can be the foundation of a damage appearance model (DAM).

Development of a three-dimensional color rendition space for tunable solid-state light sources

2021 ◽  
Vol 2021 (29) ◽  
pp. 136-140
Author(s):  
Dorukalp Durmus
Keyword(s):  
Solid State ◽  
Dimensional Space ◽  
Three Dimensional ◽  
Color Discrimination ◽  
Continuous Measure ◽  
Light Sources ◽  
Vast Number ◽  
Lighting Systems ◽  
Single Number

The quality of building electric lighting systems can be assessed using color rendition metrics. However, color rendition metrics are limited in quantifying tunable solid-state light sources, since tunable lighting systems can generate a vast number of different white light spectra, providing flexibility in terms of color quality and energy efficiency. Previous research suggests that color rendition is multi-dimensional in nature, and it cannot be simplified to a single number. Color shifts under a test light source in comparison to a reference illuminant, changes in color gamut, and color discrimination are important dimensions of the quality of electric light sources, which are not captured by a single-numbered metric. To address the challenges in color rendition characterization of modern solid-state light sources, the development of a multi-dimensional color rendition space is proposed. The proposed continuous measure can quantify the change in color rendition ability of tunable solid-state light devices with caveats. Future work, discretization of the continuous color rendition space, will be carried out to address the shortcomings of a continuous three-dimensional space.

scholarly journals Effect of Supplementary Light Source on Quality of Grafted Tomato Seedlings and Expression of Two Photosynthetic Genes

Agronomy ◽  
2018 ◽  
Vol 8 (10) ◽  
pp. 207 ◽  
Author(s):  
Hao Wei ◽  
Jiangtao Hu ◽  
Chen Liu ◽  
Mengzhao Wang ◽  
Jin Zhao ◽  
...  
Keyword(s):  
Light Source ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
Seedling Production ◽  
White Leds ◽  
Tomato Seedlings ◽  
Photosynthetic Genes ◽  
Supplementary Lighting

Supplementary lighting is commonly used in high-quality seedling production. In this study, grafted tomato seedlings were grown for 10 days in a glasshouse with 16-h daily supplementary lighting at 100 μmol·m−2·s−1 PPFD (Photosynthetic photon flux density) from either high-pressure sodium (HPS), metal halide (MH), far-red (FR), white LEDs (Light emitting diodes) (W), or mixed LEDs (W1R2B1, where the subscript numbers indicate the ratio of the LED chips) to determine which light sources improve the seedling quality. The control seedlings did not receive any supplementary light. Physiological parameters and the expression of genes related to photosynthesis were analyzed. The results showed that root length, biomass, number of leaves, chlorophyll (SPAD), scion dry weight to height ratio (WHR), and specific leaf weight (SLW) were the greatest for grafted seedlings grown in W1R2B1. The level of root ball formation was the greatest for seedlings grown in W1R2B1, followed by those grown in W, HPS, and MH. Seedlings grown in FR did not fare well, as they were very thin and weak. Moreover, the expression of two photosynthetic genes (PsaA and PsbA) was significantly increased by W1R2B1 and W, which suggests that the plastid or nuclear genes might be regulated. The overall results suggest that W1R2B1 was the most suitable light source to enhance the quality of grafted tomato seedlings. The results of this study could be used as a reference for seedling production in glasshouses, and may provide new insights in the research on lights affecting the development of plants.

Sign in / Sign up

Export Citation Format

Share Document