Surface treatment with silver particles isles on Titanium cp: study of antimicrobial activity

2020 ◽  
Vol 9 (4) ◽  
pp. e27942662
Author(s):  
Patrícia Capellato ◽  
Cláudia Eliana Bruno Marino ◽  
Gilbert Silva ◽  
Lucas Victor Benjamim Vasconcelos ◽  
Rodrigo Perito Cardoso ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Surface Treatment ◽  
Titanium Surface ◽  
Silver Clusters ◽  
Silver Particles ◽  
Silver Deposition ◽  
Dispersed Particles ◽  
Significant Difference ◽  
Diffusion Assay ◽  
Antibacterial Potential

During the last decades, researchers have been growing the interest in surface treatment with an antimicrobial agent. Silver nanoparticles (AgNPs) are widely used in biomedical fields due to their potent antimicrobial activity. So, in this study was investigated silver particles (isles) coated on titanium surface for dental and orthopedic application. Silver particles coating process on titanium surface were performed via sputtering that is a plasma-assisted deposition technique with and titanium without treatment was applied as comparing standard. Plasma treatment parameters were optimized so that the result was not a thin film of Ag but dispersed particles of Ag on the Ti-cp surface. The alloy surfaces were investigated using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS). In order to investigate antibacterial potential Staphylococcus aureus and Escherichia coli have been used at Agar diffusion assay. The results were analyzed by analysis of variance (ANOVA) in order to verify significant difference antimicrobial activity between samples that have shown no difference between the surfaces studied treatments. For silver deposition scattered particles (isles) over titanium surface for a 10-minute treatment, EDS revealed by silver clusters that the particles were not properly scattered onto surface, hence, the low effectiveness in antibacterial activity.

scholarly journals Effect of Different Morphology of Titanium Surface on the Bone Healing in Defects Filled Only with Blood Clot: A New Animal Study Design

2018 ◽  
Vol 2018 ◽  
pp. 1-9 ◽  
Author(s):  
Sergio Alexandre Gehrke ◽  
Berenice Anina Dedavid ◽  
Jaime Sardá Aramburú ◽  
Letícia Pérez-Díaz ◽  
José Luis Calvo Guirado ◽  
...  
Keyword(s):  
Bone Formation ◽  
Surface Treatment ◽  
Animal Study ◽  
Titanium Surface ◽  
Bone Growth ◽  
Significant Difference ◽  
Rabbit Tibia ◽  
Group A ◽  
Group B ◽  
Group D

Background. The objective of the present histologic animal study was to analyze whether roughness of the titanium surface can influence and/or stimulate the bone growth in defects filled with the blood using a rabbit tibia model. Materials and Methods. Forty sets (implant and abutment), dental implant (3.5 mm in diameter and 7 mm in length) plus healing abutment (2.5 mm in diameter), were inserted in the tibiae of 10 rabbits. Moreover, twenty titanium discs were prepared. The abutment and discs were treated by 4 different methods and divided into 4 groups: (group A) machined abutments (smooth); (group B) double acid etching treatment; (group C) treatment with blasting with particles of aluminum oxide blasted plus acid conditioning; (group D) treatment with thorough blasting with particles of titanium oxide plus acid conditioning. The discs were used to characterize the surfaces by a profilometer and scanning electronic microscopy. Results. After 8 weeks, the new bone formation around the sets of the samples was analyzed qualitatively and quantitatively in relation to bone height from the base of the implant and presence of osteocytes. Group C (1.50±0.20 mm) and group D (1.62±0.18 mm) showed bone growth on the abutment with higher values compared to group A (0.94±0.30 mm) and group B (1.19±0.23 mm), with significant difference between the groups (P < 0.05). In addition, osteocyte presence was higher in groups with surface treatment related to machined (P < 0.05). Conclusions. Within the limitations of the present study, it was possible to observe that there is a direct relationship between the roughness present on the titanium surface and the stimulus for bone formation, since the presence of larger amounts of osteocytes on SLA surfaces evidenced this fact. Furthermore, the increased formation of bone tissue in height demonstrates that there is an important difference between the physical and chemical methods used for surface treatment.

Green and Simple Synthesis of Silver Nanoparticles by Aqueous Extract of Perovskia abrotanoides: Characterization, Optimization and Antimicrobial Activity

2020 ◽  
Vol 21 (11) ◽  
pp. 1129-1137 ◽  
Author(s):  
Somayeh Mirsadeghi ◽  
Masoumeh F. Koudehi ◽  
Hamid R. Rajabi ◽  
Seied M. Pourmortazavi
Keyword(s):  
Antimicrobial Activity ◽  
Silver Nanoparticles ◽  
Minimum Inhibitory Concentration ◽  
Plant Extract ◽  
Inhibitory Concentration ◽  
Minimum Bactericidal Concentration ◽  
Extraction Temperature ◽  
Silver Particles ◽  
Silver Nps ◽  
Perovskia Abrotanoides

Background: Herein, we report the biosynthesis procedure to prepare silver nanoparticles as reduction and capping agents with the aqueous plant extract of Perovskia abrotanoides. Methods: The therapeutic application of silver nanoparticles entirely depends on the size and shape of the nanoparticles therefore, their control during the synthesis procedure is so important. The effects of synthesis factors, for example, silver ion concentration, the mass of plant extract, reaction time and extraction temperature, on the size of silver particles were considered and optimized. Several analytical methods were used for the characterization of silver NPs including FT-IR and UV–Vis spectrophotometer, XRD and SEM. Results: The results showed that the mean size of the silver particles was about 51 nm. Moreover, the antibacterial properties of biosynthesized silver NPs were investigated by the minimum inhibitory concentration, minimum bactericidal concentration, and Well-diffusion tests. The minimum inhibitory concentration/ minimum bactericidal concentration values of silver NPs and aqueous plant extract versus Gram-positive bacteria (Staphylococcus aureus and Bacillus cereus) and Gram-negative bacteria (E. coli) were 3.03/0.00, 1.20/0.01, 3.06/0.00, 0.98/1.04, 1.00/0.05 and 1.30/0.03 (mg/mL), respectively. Conclusion: The antimicrobial activity study displayed that the synthesized silver nanoparticles by plant extract have better antimicrobial properties compared to aqueous plant extract of Perovskia abrotanoides.

scholarly journals Antifungal Activity of Propyl Disulfide from Neem (Azadirachta indica) in Vapor and Agar Diffusion Assays against Anthracnose Pathogens (Colletotrichum gloeosporioides and Colletotrichum acutatum) in Mango Fruit

2021 ◽  
Vol 9 (4) ◽  
pp. 839
Author(s):  
Muhammad Rafiullah Khan ◽  
Vanee Chonhenchob ◽  
Chongxing Huang ◽  
Panitee Suwanamornlert
Keyword(s):  
Antifungal Activity ◽  
Mycelial Growth ◽  
Colletotrichum Gloeosporioides ◽  
Colletotrichum Acutatum ◽  
Model Parameters ◽  
Pathogenicity Test ◽  
Agar Diffusion ◽  
Wide Range ◽  
Significant Difference ◽  
Diffusion Assay

Microorganisms causing anthracnose diseases have a medium to a high level of resistance to the existing fungicides. This study aimed to investigate neem plant extract (propyl disulfide, PD) as an alternative to the current fungicides against mango’s anthracnose. Microorganisms were isolated from decayed mango and identified as Colletotrichum gloeosporioides and Colletotrichum acutatum. Next, a pathogenicity test was conducted and after fulfilling Koch’s postulates, fungi were reisolated from these symptomatic fruits and we thus obtained pure cultures. Then, different concentrations of PD were used against these fungi in vapor and agar diffusion assays. Ethanol and distilled water were served as control treatments. PD significantly (p ≤ 0.05) inhibited more of the mycelial growth of these fungi than both controls. The antifungal activity of PD increased with increasing concentrations. The vapor diffusion assay was more effective in inhibiting the mycelial growth of these fungi than the agar diffusion assay. A good fit (R2, 0.950) of the experimental data in the Gompertz growth model and a significant difference in the model parameters, i.e., lag phase (λ), stationary phase (A) and mycelial growth rate, further showed the antifungal efficacy of PD. Therefore, PD could be the best antimicrobial compound against a wide range of microorganisms.

scholarly journals Characterization and Antibacterial Response of Silver Nanoparticles Biosynthesized Using an Ethanolic Extract of Coccinia indica Leaves

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 97
Author(s):  
Suresh V. Chinni ◽  
Subash C. B. Gopinath ◽  
Periasamy Anbu ◽  
Neeraj Kumar Fuloria ◽  
Shivkanya Fuloria ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Antimicrobial Activity ◽  
Silver Nanoparticles ◽  
Zeta Potential ◽  
Ethanolic Extract ◽  
Spherical Shape ◽  
Bacterial Strains ◽  
X Ray ◽  
Coccinia Indica ◽  
Antibacterial Potential

The present study was planned to characterize and analyze the antimicrobial activity of silver nanoparticles (AgNP) biosynthesized using a Coccinia indica leaf (CIL) ethanolic extract. The present study included the preparation of CIL ethanolic extract using the maceration process, which was further used for AgNP biosynthesis by silver nitrate reduction. Biosynthetic AgNPs were characterized using UV–Visible spectrometry, zeta potential analysis, transmission electron microscopy (TEM), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD), and energy-dispersive X-ray (EDX) spectrometry. The biogenic AgNP and CIL extracts were further investigated against different bacterial strains for their antimicrobial activity. The surface plasmon resonance (SPR) signal at 425 nm confirmed AgNP formation. The SEM and TEM data revealed the spherical shape of biogenic AgNPs and size in the range of 8 to 48 nm. The EDX results verified the presence of Ag. The AgNPs displayed a zeta potential of −55.46 mV, suggesting mild AgNP stability. Compared to Gram-positive bacteria, the biogenic AgNPs demonstrated high antibacterial potential against Gram-negative bacteria. Based on the results, the current study concluded that AgNPs based on CIL extract have strong antibacterial potential, and it established that AgNP biosynthesis using CIL ethanol extract is an effective process.

scholarly journals Assessment of the Tissue Response to Modification of the Surface of Dental Implants with Carboxyethylphosphonic Acid and Basic Fibroblastic Growth Factor Immobilization (Fgf-2): An Experimental Study on Minipigs

Biology ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 358
Author(s):  
Javier Aragoneses ◽  
Ana Suárez ◽  
Nansi López-Valverde ◽  
Francisco Martínez-Martínez ◽  
Juan Manuel Aragoneses
Keyword(s):  
Surface Treatment ◽  
Test Group ◽  
Mean Value ◽  
Control Group ◽  
P Value ◽  
Implant Surface ◽  
Bone Contact ◽  
Bone Implant ◽  
Significant Difference ◽  
The Mean

The aim of this study was to evaluate the effect of implant surface treatment with carboxyethylphosphonic acid and fibroblast growth factor 2 on the bone–implant interface during the osseointegration period in vivo using an animal model. The present research was carried out in six minipigs, in whose left tibia implants were inserted as follows: eight implants with a standard surface treatment, for the control group, and eight implants with a surface treatment of carboxyethylphosphonic acid and immobilization of FGF-2, for the test group. At 4 weeks after the insertion of the implants, the animals were sacrificed for the histomorphometric analysis of the samples. The means of the results for the implant–bone contact variable (BIC) were 46.39 ± 17.49% for the test group and 34.00 ± 9.92% for the control group; the difference was not statistically significant. For the corrected implant–bone contact variable (BICc), the mean value of the test group was 60.48 ± 18.11%, and that for the control group, 43.08 ± 10.77%; the difference was statistically significant (p-value = 0.035). The new bone formation (BV/TV) showed average results of 27.28 ± 3.88% for the test group and 26.63 ± 7.90% for the control group, meaning that the differences were not statistically significant (p-value = 0.839). Regarding the bone density at the interthread level (BAI/TA), the mean value of the test group was 32.27 ± 6.70%, and that of the control group was 32.91 ± 7.76%, with a p-value of 0.863, while for the peri-implant density (BAP/TA), the mean value of the test group was 44.96 ± 7.55%, and that for the control group was 44.80 ± 8.68%, without a significant difference between the groups. The current research only found a significant difference for the bone–implant contact at the cortical level; therefore, it could be considered that FGF-2 acts on the mineralization of bone tissue. The application of carboxyethylphosphonic acid on the surface of implants can be considered a promising alternative as a biomimetic coating for the immobilization of FGF-2. Despite no differences in the new bone formation around the implants or in the interthread or peri-implant bone density being detected, the biofunctionalization of the implant surface with FGF-2 accelerates the mineralization of the bone–implant interface at the cortical level, thereby reducing the osseointegration period.

scholarly journals Enaminone-Derived Pyrazoles with Antimicrobial Activity

2019 ◽  
Vol 2019 ◽  
pp. 1-10
Author(s):  
Mashooq Ahmad Bhat ◽  
Mohamed A. Al-Omar ◽  
Ahmed M. Naglah ◽  
Abdul Arif Khan
Keyword(s):  
Antimicrobial Activity ◽  
Gram Negative Bacteria ◽  
Significant Activity ◽  
Disc Diffusion ◽  
Initial Screening ◽  
Gram Positive ◽  
Gram Negative ◽  
Disc Diffusion Assay ◽  
Gram Positive Bacteria ◽  
Diffusion Assay

A series of pyrazoles derived from the substituted enaminones were synthesized and were evaluated for antimicrobial activity. All the compounds were characterized by the spectral data and elemental analysis. The synthesized compounds were initially screened for their antimicrobial activity against ATCC 6538, NCTC 10400, NCTC 10418, and ATCC 27853. During initial screening, compounds (P1, P6, and P11) presented significant antimicrobial activity through disc diffusion assay. These compounds were further evaluated for antimicrobial activity at different time points against Gram-positive and Gram-negative bacteria and presented significant activity for 6 hours. The activity was found to be greater against Gram-positive bacteria. In contrast at 24 hours, the activity was found only against Gram-positive bacteria except compound (P11), showing activity against both types of bacteria. Compound (P11) was found to have highest activity against both Gram-positive and Gram-negative bacteria.

Influence of Titanium Surface Treatment on Adsorption of Primary Amines

2013 ◽  
Vol 117 (3) ◽  
pp. 1297-1307 ◽  
Author(s):  
Carole Gadois ◽  
Jolanta Światowska ◽  
Sandrine Zanna ◽  
Philippe Marcus
Keyword(s):  
Surface Treatment ◽  
Titanium Surface ◽  
Primary Amines

scholarly journals In vitro evaluation of the antimicrobial activity of five root canal sealers

2004 ◽  
Vol 15 (1) ◽  
pp. 30-35 ◽  
Author(s):  
Brenda Paula Figueiredo de Almeida Gomes ◽  
José Assis Pedroso ◽  
Rogério Castilho Jacinto ◽  
Morgana Eli Vianna ◽  
Caio Cezar Randi Ferraz ◽  
...  
Keyword(s):  
Antimicrobial Activity ◽  
Antimicrobial Properties ◽  
Contact Method ◽  
Streptococcus Sanguis ◽  
Actinomyces Naeslundii ◽  
Agar Diffusion Test ◽  
Significant Difference ◽  
Ah Plus ◽  
Endodontic Sealers

The aim of the present study was to analyze the antimicrobial properties of five endodontic sealers: Endo Fill, Endomethasone, Endomethasone N, Sealer 26 and AH-Plus, against the following microorganisms: Candida albicans, Staphylococcus aureus, Enterococcus faecalis, Streptococcus sanguis and Actinomyces naeslundii. The sealers were tested immediately, 24 h, 48 h and 7 days after manipulation.The direct contact method through the observation of the microbial growth in liquid medium and the agar diffusion test were used to evaluate the antimicrobial properties of the sealers. The results, in both methodologies used, showed that immediately after manipulation, Endo-Fill and Endomethasone demonstrated the highest antimicrobial activity, with no statistically significant difference between them. Sealer 26 demonstrated the lowest antimicrobial activity. At all other times after manipulation, there were no statistically significant differences among all the sealers tested. In conclusion, none of the sealers totally inhibited the growth of the microorganisms. Furthermore, the antimicrobial activity of each sealer decreased with time and was dependent upon the microbial susceptibility to them.

scholarly journals Antimicrobial activity of Cymbopogon citratus (Poaceae) essential oil on Streptococcus mutans biofilm and cytotoxic effect on keratinocytes and fibroblasts

2018 ◽  
Vol 66 (4) ◽  
pp. 1519
Author(s):  
Mailen Ortega Cuadros ◽  
Adriana Patricia Tofiño Rivera ◽  
Luciano Jose Merini ◽  
Maria Cecilia Martinez Pabon
Keyword(s):  
Antimicrobial Activity ◽  
Dental Caries ◽  
Essential Oil ◽  
Streptococcus Mutans ◽  
Human Fibroblasts ◽  
Positive Control ◽  
Negative Control ◽  
Cymbopogon Citratus ◽  
Significant Difference ◽  
Efficient Alternative

Dental caries is a pathology of multifactorial origin and currently natural products are an efficient alternative treatment; The work sought to evaluate the antimicrobial activity of the Cymbopogon citratus essential oil and the citral and myrcene components against Streptococcus mutans ATCC UA159, as well as their cytotoxicity on keratinocytes and human fibroblasts. The viability effect against Streptococcus mutans on biofilms was evaluated through exposure to the three substances by using the MBEC technique-high-throughput at concentrations of 1, 0.1, and 0.01 µg/mL and chlorhexidine as positive control. The cytotoxicity of the compounds was evaluated on keratinocytes and fibroblasts through the MTT reduction technique, using 0.5 mM H2O2 as cell-death control (negative control) and ethanol 1% as vehicle control (positive control). The three substances evaluated had effects on the viability of Streptococcus mutans with mortality between 74% and 96%, without significant difference among them (p > 0.393); additionally, no cytotoxicity was evident on keratinocytes and fibroblasts in a 24-h treatment. The substances evaluated showed significant antimicrobial effects; hence, these should be studied further as potential co-adjuvants to prevent dental caries that cause minor adverse effects

Sign in / Sign up

Export Citation Format

Share Document