scholarly journals Ultrasonic Treatment Increases Extraction Rate of Common Bean (Phaseolus vulgaris L.) Antioxidants

Antioxidants ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 83 ◽  
Author(s):  
Qiong-Qiong Yang ◽  
Ren-You Gan ◽  
Ying-Ying Ge ◽  
Dan Zhang ◽  
and Harold Corke
Keyword(s):  
Common Bean ◽  
Ultrasonic Treatment ◽  
High Performance ◽  
Extraction Rate ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Infrared Spectrophotometer ◽  
Conventional Solvent Extraction ◽  
Ft Ir

The feasibility of improving the extraction rate of common bean antioxidants by ultrasonic treatment was investigated. Scanning electron microscopy (SEM) and spectrum Fourier transform infrared spectrophotometer (FT-IR) analysis revealed that ultrasonic treatment substantially altered the cellular structure of common bean seed, resulting in increased surface area, eroded cell walls, and greater exposure of cellulose and hemicellulose. The highest antioxidant activity was obtained at optimal extraction conditions (68 min, 55% acetone, 36:1 liquid to solid ratio, 30 ℃, and 480 W) which were optimized by response surface methodology. In terms of the extraction rate of common bean antioxidants, ultrasound-assisted extraction (UAE) exhibits about seven-fold higher extraction efficiency than conventional solvent extraction (CSE). In addition, 10 phenolic compounds in the common bean extracts were detected and quantified by high performance liquid chromatography (HPLC), including protocatechuic acid, catechin, chlorogenic acid, epicatechin, ferulic acid, coumarin, rutin, myricetin, cinnamic acid, and genistein. In summary, ultrasonic treatment is an ideal candidate methodology for improving the extraction rate of common bean antioxidants.

Optimization of Ultrasound-Assisted Extraction of Oil from Camellia(Camellia oleifera abel) Seed

2011 ◽  
Vol 236-238 ◽  
pp. 1854-1858 ◽  
Author(s):  
Xue Hui Wu ◽  
Li Li
Keyword(s):  
Ultrasonic Treatment ◽  
Treatment Time ◽  
Treatment Temperature ◽  
Ultrasonic Power ◽  
Ultrasound Assisted Extraction ◽  
Camellia Oil ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Main Component

Camellia oil is the main component of the camellia seed and has many beneficial functions to human health. An investigation into ultrasound- assisted extraction was conducted for the oil extraction from camellia seed. The optimized condition of extraction parameters obtained with the response surface methodology (RSM) at a four-variable, three-level experiment Box–Behnken design (BBD), was as follows: liquid-solid ratio, 5mL/g;ultrasonic power,155W;ultrasonic treatment time,31 min; and ultrasonic treatment temperature, 55°C, under these conditions, the oil yeild was 44.55%. GC–MS analysis showed that the content of unsaturated fatty acid in camellia oil was up to 84.47% and the content of oleic acid was over 76.15%.

scholarly journals Simultaneous Determination of Six Isoflavones from Puerariae Lobatae Radix by CPE-HPLC and Effect of Puerarin on Tyrosinase Activity

Molecules ◽  
2020 ◽  
Vol 25 (2) ◽  
pp. 344 ◽  
Author(s):  
Limin Qu ◽  
Ke Song ◽  
Qi Zhang ◽  
Jie Guo ◽  
Juan Huang
Keyword(s):  
High Performance ◽  
Equilibrium Temperature ◽  
Extraction Yield ◽  
Tyrosinase Activity ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Triton X ◽  
Diphenolase Activity

Tyrosinase inhibitors with excellent inhibitory activities and lower side effects have promising applications in the fields of medicine, agriculture, food sciences and cosmetics. In this study, a method for simultaneous separation and determination of six target compounds (puerarin, daidzin, genistein, daidzein, genistin, and formononetin) in Puerariae Lobatae Radix was established by cloud point extraction (CPE) and concentration combined with high performance liquid chromatography (HPLC). To achieve high extraction yields, an ultrasound-assisted extraction method was developed based on a salt-modified Triton X-100 system. The optimal extraction conditions are: surfactant Triton X-100 concentration 0.07 g/mL, liquid-solid ratio 80:1 (mL/g), NaCl addition amount 0.6 g, equilibrium time 40 min, equilibrium temperature 70 °C. Under the optimal conditions, the total maximum extraction yield of the six target isoflavones reached 8.92 mg/g. Using l-tyrosine and l-dopa as substrates, the effects of puerarin on the monophenolase and diphenolase activity of tyrosinase activity were investigated by the enzyme kinetics method. The results showed that puerarin inhibited monophenolase activity with an IC50 of 0.537 mg/mL and activated diphenolase activity. The inhibition type of puerarin on monophenolase and the activation type of puerarin on diphenolase were analyzed by Lineweaver-Burk plots which show that puerarin showed mixed inhibition on monophenolase and mixed activation on diphenolase. Therefore, puerarin can be used as both a tyrosinase inhibitor and a tyrosinase activator.

scholarly journals Optimization of Ultrasound Assisted Extraction (UAE) of Kinsenoside Compound from Anoectochilus roxburghii (Wall.) Lindl by Response Surface Methodology (RSM)

Molecules ◽  
2020 ◽  
Vol 25 (1) ◽  
pp. 193 ◽  
Author(s):  
Biyun Yang ◽  
Mengyuan Zhang ◽  
Haiyong Weng ◽  
Yong Xu ◽  
Lihui Zeng
Keyword(s):  
Response Surface ◽  
High Performance ◽  
Dry Weight ◽  
Methanol Concentration ◽  
Ultrasonic Power ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Anoectochilus Roxburghii ◽  
Ultrasound Assisted

The purpose of this study was to establish an extraction method for the kinsenoside compound from the whole plant Anoectochilus roxburghii. Ultrasound assisted extraction (UAE) and Ultra-high performance liquid chromatography (UPLC) method were used to extract and determine the content of kinsenoside, while response surface method (RSM) was used to optimize the extraction process. The best possible range for methanol concentration (0–100%), the liquid-solid ratio (5:1–30:1 mL/g), ultrasonic power (240–540 W), duration of ultrasound (10–50 min), ultrasonic temperature (10–60 °C), and the number of extractions (1–4) were obtained according to the single factor experiments. Then, using the Box-Behnken design (BBD) of response surface analysis, the optimum extraction conditions were obtained with 16.33% methanol concentration, the liquid-solid ratio of 10.83:1 mL/g and 35.00 °C ultrasonic temperature. Under these conditions, kinsenoside extraction yield reached 32.24% dry weight. The best conditions were applied to determine the kinsenoside content in seven different cultivation ages in Anoectochilus roxburghii.

scholarly journals Extraction of Phenolic Compounds and Terpenes from Cannabis sativa L. By-Products: From Conventional to Intensified Processes

Antioxidants ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 942
Author(s):  
Emilie Isidore ◽  
Hamza Karim ◽  
Irina Ioannou
Keyword(s):  
Phenolic Compounds ◽  
Cannabis Sativa ◽  
Biological Activities ◽  
Operating Conditions ◽  
Extraction Techniques ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Whole Plant ◽  
Conventional Solvent Extraction ◽  
By Products

Cannabis sativa L. is a controversial crop due to its high tetrahydrocannabinol content varieties; however, the hemp varieties get an increased interest. This paper describes (i) the main categories of phenolic compounds (flavonoids, stilbenoids and lignans) and terpenes (monoterpenes and sesquiterpenes) from C. sativa by-products and their biological activities and (ii) the main extraction techniques for their recovery. It includes not only common techniques such as conventional solvent extraction, and hydrodistillation, but also intensification and emerging techniques such as ultrasound-assisted extraction or supercritical CO2 extraction. The effect of the operating conditions on the yield and composition of these categories of phenolic compounds and terpenes was discussed. A thorough investigation of innovative extraction techniques is indeed crucial for the extraction of phenolic compounds and terpenes from cannabis toward a sustainable industrial valorization of the whole plant.

QuEChERS with ultrasound-assisted extraction combined with high-performance liquid chromatography for the determination of 16 polycyclic aromatic hydrocarbons in sediment

2021 ◽  
Author(s):  
Ling Wu ◽  
Qiurong He ◽  
Jing Zhang ◽  
Yongxin Li ◽  
Weiqing Yang ◽  
...  
Keyword(s):  
High Performance Liquid Chromatography ◽  
Liquid Chromatography ◽  
Aromatic Hydrocarbons ◽  
High Performance ◽  
Ultrasound Assisted Extraction ◽  
Sediment Samples ◽  
Assisted Extraction ◽  
Polycyclic Aromatic ◽  
Ultrasound Assisted

Abstract Background Polycyclic aromatic hydrocarbons (PAHs) have attracted worldwide attention due to their carcinogenic, teratogenic and mutagenic effects, environmental persistence and bioaccumulation characteristics. Therefore, the sensitive, reliable and rapid detection of PAHs in sediment is of great importance. Objective To develop a high-performance liquid chromatography (HPLC) with fluorescence and ultraviolet detection after QuEChERS treatment for simultaneous determination of 16 U.S. Environmental Protection Agency priority PAHs in sediment samples. Methods The samples were ultrasonically extracted with acetone and then the supernatant was purified with a modified QuEChERS method. After centrifugation, the supernatant was injected into the HPLC system for analysis. The separation was accomplished on a ZORBAX Eclipse PAH column (150 × 4.6 mm, 3.5 μm) and the column temperature was set at 30 °C. The flow rate of the mobile phase consisting of water and acetonitrile in gradient elution mode was fixed at 0.9 mL/min. Detection was conducted on an ultraviolet detector and a fluorescence detector simultaneously. The qualitative analysis was based on retention time and the quantification was based on standard curves. Results Under the optimal conditions, this method showed good linearities in the range of 10–200 μg/L with correlation coefficients greater than 0.9993. The method had the limits of detection (LODs) ranging from 0.00108 to 0.314 ng/g. The mean recoveries ranged from 78.4 to 117% with the intra-day and inter-day relative standard deviations (RSDs) of 0.592–10.7 and 1.01–13.0%, respectively. The proposed method was successfully applied to the detection of 16 PAHs in sediment samples collected from the Funan River in Chengdu, China with the total contents of 431 to 2143 ng/g·dw. Conclusions The established method is simple, rapid, environment-friendly and cost- effective. It can be applied to the analysis of 16 PAHs in sediment samples. Highlights A method of QuEChERS with ultrasound-assisted extraction combined with HPLC has been established for the analysis of 16 PAHs in sediment samples and the proposed method has been successfully applied to the analysis PAHs in real sediment samples.

Determination of the Isoflavone Genistein in Soybeans by High-Performance Liquid Chromatography Following Cloud Point Extraction

2012 ◽  
Vol 95 (3) ◽  
pp. 845-849 ◽  
Author(s):  
Mohammad Mirzaei ◽  
Atieh Karimi Naeini ◽  
Mansoureh Behzadi
Keyword(s):  
Cloud Point ◽  
High Performance ◽  
Cloud Point Extraction ◽  
Uv Detector ◽  
Experimental Conditions ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasonic Assisted ◽  
Replicate Measurements

Abstract A simple and sensitive method has been developed for preconcentration and determination of genistein in soybeans. This method is based on cloud point extraction (CPE) of genistein from soybeans using ethylene glycol monoalkyl ether (Genapol X-080) as a nonionic surfactant. The concentration of extracted genistein was determined by HPLC with a UV detector. Optimum experimental conditions were established. With 5% Genapol X-080 (v/v), a liquid/solid ratio of 25:1 mL/g, and ultrasonic-assisted extraction at 40°C for 45 min, the extraction percentage of genistein reached its highest value. The preconcentration factor for genistein was about 16.5. The RSD for seven replicate measurements and the LOD were ±4.45% and 15.0 ng/mL, respectively. CPE is simple, inexpensive, and suitable for extraction of genistein from soybean. It uses environmentally friendly surfactants and offers a convenient alternative to more conventional extraction systems.

scholarly journals Optimization of Ultrasound-Assisted Extraction via Sonotrode of Phenolic Compounds from Orange By-Products

Foods ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 1120
Author(s):  
María del Carmen Razola-Diaz ◽  
Eduardo Jesús Guerra-Hernández ◽  
Celia Rodríguez-Pérez ◽  
Ana María Gómez-Caravaca ◽  
Belén García-Villanova ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Phenolic Compounds ◽  
High Performance ◽  
Phenolic Content ◽  
Orange Peel ◽  
Polar Compounds ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Quantitative Analyses ◽  
Ultrasound Assisted

Orange peel is the main by-product from orange juice industry. It is a known source of bioactive compounds, mostly phenolic compounds, and it has been widely studied for its healthy activities. Thus, this research focuses on the establishment of ultrasound-assisted extraction of phenolic compounds in orange peel using a sonotrode. For this purpose, a Box–Behnken design of 27 experiments was carried out with four independent factors—ratio ethanol/water (v/v), time (min), amplitude (%), and pulse (%). Quantitative analyses of phenolic compounds were performed and the antioxidant activity was measured by ABTS and DPPH methods. The validity of the experimental design was confirmed by ANOVA and the optimal sonotrode extraction conditions were obtained by response surface methodology (RSM). The extracts obtained in the established conditions were analyzed by High Performance Liquid Chromatography (HPLC) coupled to mass spectrometer detector and 74 polar compounds were identified. The highest phenolic content and antioxidant activity were obtained using 45/55 ethanol/water (v/v), 35 min, amplitude 90% (110 W), and pulse 100%. The established method allows an increment of phenolics recovery up to 60% higher than a conventional extraction. Moreover, the effect of drying on phenolic content was also evaluated.

scholarly journals Natural Deep Eutectic Solvents for Simultaneous Extraction of Multi-Bioactive Components from Jinqi Jiangtang Preparations

Pharmaceutics ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 18 ◽  
Author(s):  
Lele Yang ◽  
Ling Li ◽  
Hao Hu ◽  
Jianbo Wan ◽  
Peng Li
Keyword(s):  
High Performance ◽  
Choline Chloride ◽  
Deep Eutectic Solvents ◽  
Bioactive Components ◽  
Operational Parameters ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Natural Deep Eutectic Solvents ◽  
Quantification Analysis ◽  
Chemical Profiles

Natural deep eutectic solvents (NADESs), composed of natural primary metabolites, are now widely used as green and sustainable extraction solvents of bioactive components. In the present study, various NADESs were prepared to extract multi-components from different preparations of an herbal formula (Chinese name: Jinqi Jiangtang, JQJT) using ultrasound-assisted extraction (UAE). Results showed that most prepared NADESs provided more effective extraction of phenolic acids and alkaloids from JQJT preparations than conventional solvents. Among the tested NADESs, the solvent formed by choline chloride and laevulinic acid was selected to optimize the operational parameters using response surface methodology. The optimized extraction method was successfully applied to extract six major components in four commercial JQJT products, and quantification analysis was performed by the validated high-performance liquid chromatography with ultraviolet detection (HPLC-UV) method. The quantitative results indicated that preparations from different manufacturers showed different chemical profiles. In conclusion, NADESs-based UAE shows considerable potential as an efficient and green method for extraction of multi-bioactive components from commercial herbal preparations.

scholarly journals Antioxidant Capacity and Antigenotoxic Effect of Hibiscus sabdariffa L. Extracts Obtained with Ultrasound-Assisted Extraction Process

2020 ◽  
Vol 10 (2) ◽  
pp. 560
Author(s):  
Gregorio Iván Peredo Pozos ◽  
Mario Alberto Ruiz-López ◽  
Juan Francisco Zamora Nátera ◽  
Carlos Álvarez Moya ◽  
Lucia Barrientos Ramírez ◽  
...  
Keyword(s):  
Antioxidant Activity ◽  
Human Lymphocytes ◽  
Dry Weight ◽  
Extraction Process ◽  
Hibiscus Sabdariffa ◽  
Ultrasound Assisted Extraction ◽  
Solid Ratio ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Antigenotoxic Effect

Hibiscus sabdariffa (Roselle) is in high demand worldwide due to its beneficial health properties owing to the polyphenols content, mainly in the flower calyx. The objective of this study was to find the best conditions (time and liquid: solid ratio) to extract polyphenols from Roselle using Ultrasound-Assisted Extraction (UAE) (40 kHz, 180 W), with ethanol how solvent; as well as determine the yield of phenols, anthocyanin, flavonoids, tannins, antioxidant activity (DPPH) and antigenotoxic effect (comet assay). A traditional solid-liquid extraction was applied as a reference. Extraction times of 40 and 60 min resulted in the highest polyphenols (13.019 mg GAE/g dry weight (dw)), flavonoids (4.981 CE/g dw), anthocyanins (1.855 mg Cya3GE/g dw), and tannins (0.745 CE/g dw) recoveries and an antioxidant activity (DPPH) of 74.58%. Extracts from white calyces contained similar amounts of phenols and flavonoids, but very little condensed tannins (0.049 CE/g dw) and practically no anthocyanins. Extracts from red and white calyces, showed antigenotoxic activity and repaired capacity of damage caused by mutagens in human lymphocytes.

Sign in / Sign up

Export Citation Format

Share Document