scholarly journals Effect of Football Shoe Collar Type on Ankle Biomechanics and Dynamic Stability during Anterior and Lateral Single-Leg Jump Landings

2020 ◽  
Vol 10 (10) ◽  
pp. 3362
Author(s):  
Yunqi Tang ◽  
Zhikang Wang ◽  
Yifan Zhang ◽  
Shuqi Zhang ◽  
Shutao Wei ◽  
...  
Keyword(s):  
Dynamic Stability ◽  
Ankle Joint ◽  
Force Plate ◽  
Joint Stiffness ◽  
Lower Limbs ◽  
Jump Landing ◽  
Ankle Inversion ◽  
Reaction Forces ◽  
Ankle Biomechanics ◽  
Jump Landings

In this study, we investigated the effects of football shoes with different collar heights on ankle biomechanics and dynamic postural stability. Fifteen healthy college football players performed anterior and lateral single-leg jump landings when wearing high collar, elastic collar, or low collar football shoes. The kinematics of lower limbs and ground reaction forces were collected by simultaneously using a stereo-photogrammetric system with markers (Vicon) and a force plate (Kistler). During the anterior single-leg jump landing, a high collar shoe resulted in a significantly smaller ankle dorsiflexion range of motion (ROM), compared to both elastic (p = 0.031, dz = 0.511) and low collar (p = 0.043, dz = 0.446) types, while also presenting lower total ankle sagittal ROM, compared to the low collar type (p = 0.023, dz = 0.756). Ankle joint stiffness was significantly greater for the high collar, compared to the elastic collar (p = 0.003, dz = 0.629) and low collar (p = 0.030, dz = 1.040). Medial-lateral stability was significantly improved with the high collar, compared to the low collar (p = 0.001, dz = 1.232). During the lateral single-leg jump landing, ankle inversion ROM (p = 0.028, dz = 0.615) and total ankle frontal ROM (p = 0.019, dz = 0.873) were significantly smaller for the high collar, compared to the elastic collar. The high collar also resulted in a significantly smaller total ankle sagittal ROM, compared to the low collar (p = 0.001, dz = 0.634). Therefore, the high collar shoe should be effective in decreasing the amount of ROM and increasing the dynamic stability, leading to high ankle joint stiffness due to differences in design and material characteristics of the collar types.

scholarly journals Effect of knee extensor fatigue level and sex on bilateral jump-landing

2020 ◽  
Vol 6 (1) ◽  
pp. e000660 ◽  
Author(s):  
Byungjoo Noh ◽  
Chang Hong Youm ◽  
Myeounggon Lee ◽  
Hwayoung Park ◽  
Minji Son ◽  
...  
Keyword(s):  
Force Plate ◽  
Knee Extensor ◽  
Knee Extension ◽  
Knee Joints ◽  
Jump Landing ◽  
Severe Fatigue ◽  
Peak Knee ◽  
Reaction Forces ◽  
Study Participants ◽  
Maximal Effort

ObjectiveThe purpose of this study was to determine the effect of fatigue level and sex on the range of motions of the lower extremities and impulses during the jump-landing phase after performing bilateral fatiguing tasks.MethodsIn total, 41 healthy young adults volunteered for this study. Participants’ jump-landing trajectories were monitored using nine cameras, and ground reaction forces were measured using a force plate. Participants performed five maximal bilateral countermovement jumps as prefatiguing tasks. The fatiguing tasks consisted of maximal effort contractions of the knee extensor at 60°/s on a dynamometer until task failure, defined as the inability to reach 50% of the peak knee extension torque for three consecutive times. The post-task maximal bilateral jumps were immediately captured after the participants failed the fatiguing task. Participants were asked to perform this cycle again, performing the fatiguing contraction task until failure to reach 30% of the peak knee extension torque.Results and conclusionIt was found that the knee joint was more extended in the post-30% fatiguing task, which was due to the reduction of the flexion angle of the hip and knee joints in response to fatigue level. The impulses for both sexes were reduced at the severe fatigue level. Fatigability altered jump-landing kinematics, jump heights and impulses in response to fatigue level. The post-30% fatiguing task elicited more fatigue than the post-50% fatiguing task.

scholarly journals Ankle Bracing, Fatigue, and Time to Stabilization in Collegiate Volleyball Athletes

2008 ◽  
Vol 43 (2) ◽  
pp. 164-171 ◽  
Author(s):  
Megan Y. Shaw ◽  
Phillip A. Gribble ◽  
Jamie L. Frye
Keyword(s):  
Dynamic Stability ◽  
Repeated Measures ◽  
Force Plate ◽  
Starting Position ◽  
Jump Landing ◽  
Time Interaction ◽  
Ankle Brace ◽  
Time To Stabilization ◽  
Post Hoc ◽  
Anterior Posterior

Abstract Context: Fatigue has been shown to disrupt dynamic stability in healthy volunteers. It is not known if wearing prophylactic ankle supports can improve dynamic stability in fatigued athletes. Objective: To determine the type of ankle brace that may be more effective at providing dynamic stability after a jump-landing task during normal and fatigued conditions. Design: Two separate repeated-measures analyses of variance with 2 within-subjects factors (condition and time) were performed for each dependent variable. Setting: Research laboratory. Patients or Other Participants: Ten healthy female collegiate volleyball athletes participated (age  =  19.5 ± 1.27 years, height  =  179.07 ± 7.6 cm, mass  =  69.86 ± 5.42 kg). Intervention(s): Athletes participated in 3 separate testing sessions, applying a different bracing condition at each session: no brace (NB), Swede-O Universal lace-up ankle brace (AB), and Active Ankle brace (AA). Three trials of a jump-landing task were performed under each condition before and after induced functional fatigue. The jump-landing task consisted of a single-leg landing onto a force plate from a height equivalent to 50% of each participant's maximal jump height and from a starting position 70 cm from the center of the force plate. Main Outcome Measure(s): Time to stabilization in the anterior-posterior (APTTS) and medial-lateral (MLTTS) directions. Results: For APTTS, a condition-by-time interaction existed (F2,18  =  5.55, P  =  .013). For the AA condition, Tukey post hoc testing revealed faster pretest (2.734 ± 0.331 seconds) APTTS than posttest (3.817 ± 0.263 seconds). Post hoc testing also revealed that the AB condition provided faster APTTS (2.492 ± 0.271 seconds) than AA (3.817 ± 0.263 seconds) and NB (3.341 ± 0.339 seconds) conditions during posttesting. No statistically significant findings were associated with MLTTS. Conclusions: Fatigue increased APTTS for the AA condition. Because the AB condition was more effective than the other 2 conditions during the posttesting, the AB appears to be the best option for providing dynamic stability in the anterior-posterior direction during a landing task.

scholarly journals A Novel Method for Field Measurement of Ankle Joint Stiffness in Hopping

2021 ◽  
Vol 11 (24) ◽  
pp. 12140
Author(s):  
Sanubar Ghorbani Faal ◽  
Elham Shirzad ◽  
Ali Sharifnezhad ◽  
Mojtaba Ashrostaghi ◽  
Roozbeh Naemi
Keyword(s):  
Ankle Joint ◽  
Conventional Method ◽  
High Speed ◽  
Reaction Force ◽  
Force Plate ◽  
Joint Stiffness ◽  
New Method ◽  
Inverse Dynamic ◽  
Wide Range ◽  
Novel Method

Stiffness of ankle joint has been investigated in a wide range of biomechanical studies with a focus on the improvement of performance and reduction in the risk of injury. However, measuring ankle joint stiffness (AJS) using the existing conventional methodologies requires sophisticated equipment such as force plate and motion analyses systems. This study presents a novel method for measuring AJS during a hopping task with no force or motion measurement system. Also the validity of the proposed new method was investigated by comparing the results against those obtained using conventional method in which motion capture and force plate data are used. Twelve participants performed the controlled hopping task at 2.2 Hz, on a force platform, and six high speed cameras recorded the movement. To calculate the AJS in both methods, the lower extremity was modeled as a three linked rigid segments robot with three joints. In the new method, the contact time and flight time were used to calculate ground reaction force, and inverse kinematic and inverse dynamic approaches were used to calculate the ankle kinematic and kinetic. The AJS calculated using the new method was compared against the results of conventional method as the reference. The calculated AJS using this new method (506.47 ± 177.84 N·m/rad) showed a significant correlation (r = 0.752) with the AJS calculated using conventional method (642.39 ± 185.96 N·m/rad). The validation test showed a mean difference of −24.76% using Bland–Altman plot. The presented method can be used as a valid, and low-cost tool for assessing AJS in the field in low resource settings.

The Effect of Jump-Landing Directions on Dynamic Stability

2013 ◽  
Vol 29 (5) ◽  
pp. 634-638 ◽  
Author(s):  
Kathy Liu ◽  
Gary D. Heise
Keyword(s):  
Dynamic Stability ◽  
Reaction Force ◽  
Body Height ◽  
Force Plate ◽  
Forward Direction ◽  
Female Age ◽  
Jump Landing ◽  
Time To Stabilization ◽  
Vertical Jumps ◽  
Anterior Posterior

Dynamic stability is often measured by time to stabilization (TTS), which is calculated from the dwindling fluctuations of ground reaction force (GRF) components over time. Common protocols of dynamic stability research have involved forward or vertical jumps, neglecting different jump-landing directions. Therefore, the purpose of the present investigation was to examine the influence of different jump-landing directions on TTS. Twenty healthy participants (9 male, 11 female; age = 28 ± 4 y; body mass = 73.3 ± 21.5 kg; body height = 173.4 ± 10.5 cm) completed the Multi-Directional Dynamic Stability Protocol hopping tasks from four different directions—forward, lateral, medial, and backward—landing single-legged onto the force plate. TTS was calculated for each component of the GRF (ap = anterior-posterior; ml = medial-lateral; v = vertical) and was based on a sequential averaging technique. All TTS measures showed a statistically significant main effect for jump-landing direction. TTSml showed significantly longer times for landings from the medial and lateral directions (medial: 4.10 ± 0.21 s, lateral: 4.24 ± 0.15 s, forward: 1.48 ± 0.59 s, backward: 1.42 ± 0.37 s), whereas TTSap showed significantly longer times for landings from the forward and backward directions (forward: 4.53 ± 0.17 s, backward: 4.34 0.35 s, medial: 1.18 ± 0.49 s, lateral: 1.11 ± 0.43 s). TTSv showed a significantly shorter time for the forward direction compared with all other landing directions (forward: 2.62 ± 0.31 s, backward: 2.82 ± 0.29 s, medial: 2.91 ± 0.31 s, lateral: 2.86 ± 0.32 s). Based on these results, multiple jump-landing directions should be considered when assessing dynamic stability.

scholarly journals Effects of Running on Sand vs. Stable Ground on Kinetics and Muscle Activities in Individuals With Over-Pronated Feet

2022 ◽  
Vol 12 ◽  
Author(s):  
AmirAli Jafarnezhadgero ◽  
Nasrin Amirzadeh ◽  
Amir Fatollahi ◽  
Marefat Siahkouhian ◽  
Anderson S. Oliveira ◽  
...  
Keyword(s):  
Tibialis Anterior ◽  
Force Plate ◽  
Rectus Femoris ◽  
Lower Limbs ◽  
Emg Activity ◽  
Ground Reaction Forces ◽  
Compensatory Mechanism ◽  
Running Speed ◽  
Loading Rates ◽  
Reaction Forces

Background: In terms of physiological and biomechanical characteristics, over-pronation of the feet has been associated with distinct muscle recruitment patterns and ground reaction forces during running.Objective: The aim of this study was to evaluate the effects of running on sand vs. stable ground on ground-reaction-forces (GRFs) and electromyographic (EMG) activity of lower limb muscles in individuals with over-pronated feet (OPF) compared with healthy controls.Methods: Thirty-three OPF individuals and 33 controls ran at preferred speed and in randomized-order over level-ground and sand. A force-plate was embedded in an 18-m runway to collect GRFs. Muscle activities were recorded using an EMG-system. Data were adjusted for surface-related differences in running speed.Results: Running on sand resulted in lower speed compared with stable ground running (p < 0.001; d = 0.83). Results demonstrated that running on sand produced higher tibialis anterior activity (p = 0.024; d = 0.28). Also, findings indicated larger loading rates (p = 0.004; d = 0.72) and greater vastus medialis (p < 0.001; d = 0.89) and rectus femoris (p = 0.001; d = 0.61) activities in OPF individuals. Controls but not OPF showed significantly lower gluteus-medius activity (p = 0.022; d = 0.63) when running on sand.Conclusion: Running on sand resulted in lower running speed and higher tibialis anterior activity during the loading phase. This may indicate alterations in neuromuscular demands in the distal part of the lower limbs when running on sand. In OPF individuals, higher loading rates together with greater quadriceps activity may constitute a proximal compensatory mechanism for distal surface instability.

scholarly journals The role of the contralateral limb in below-knee amputee gait

1990 ◽  
Vol 14 (1) ◽  
pp. 33-42 ◽  
Author(s):  
G. R. B. Hurley ◽  
R. McKenney ◽  
M. Robinson ◽  
M. Zadravec ◽  
M. R. Pierrynowski
Keyword(s):  
Lower Limb ◽  
Reaction Force ◽  
Force Plate ◽  
Lower Limbs ◽  
Contralateral Limb ◽  
Joint Reaction Forces ◽  
Reaction Forces ◽  
Joint Reaction ◽  
Amputee Gait

Very little quantitative biomechanical research has been carried out evaluating issues relevant to prosthetic management. The literature available suggests that amputees may demonstrate an asymmetrical gait pattern. Furthermore, studies suggest that the forces occurring during amputee gait may be unequally distributed between the contralateral and prosthetic lower limbs/This study investigates the role of the contralateral limb in amputee gait by determining lower limb joint reaction forces and symmetry of motion in an amputee and non-amputee population. Seven adult below-knee amputees and four non-amputees participated in the study. Testing involved collection of kinematic coordinate data employing a WATSMART video system and ground reaction force data using a Kistler force plate. The degree of lower limb symmetry was determined using bilateral angle-angle diagrams and a chain encoding technique. Ankle, knee and hip joint reaction forces were estimated in order to evaluate the forces acting across the joints of the amputee's contralateral limb. The amputees demonstrated a lesser degree of lower limb symmetry than the non-amputees. This asymmetrical movement was attributed to the inherent variability of the actions of the prosthetic lower limb. The forces acting across the joints of the contralateral limb were not significantly higher than that of the non-amputee. This suggests that, providing the adult amputee has a good prosthetic fit, there will not be increased forces across the joints of the contralateral limb and consequently no predisposition for the long-term wearer to develop premature degenerative arthritis.

Rescuer’s Position and Energy Consumption, Spinal Kinetics, and Effectiveness of Simulated Cardiac Compression

2008 ◽  
Vol 17 (5) ◽  
pp. 417-425 ◽  
Author(s):  
Alice Y.M. Jones ◽  
Raymond Y.W. Lee
Keyword(s):  
Oxygen Consumption ◽  
Chest Compression ◽  
Force Plate ◽  
Lower Limbs ◽  
Emergency Medical Technicians ◽  
Chest Compressions ◽  
Cardiac Compression ◽  
Reaction Forces ◽  
Tracking Device ◽  
Kinetics Of

Background Cardiopulmonary resuscitation is often performed in compromised conditions and for long periods. Objective To compare energy expenditure, compression effectiveness, and kinetics of the spine during simulated chest compression with the rescuer in different positions. Methods A 3-group design with 36 nurses (26 females) and 20 male emergency medical technicians was used. Participants performed chest compressions on a mannequin while kneeling on the floor, standing, or kneeling on the bed at the edge of the mattress (bed mount). Oxygen consumption and effectiveness of chest compression were recorded. Muscle moment and power at the lumbosacral joint were determined by recording motions of the lower limbs and pelvis with an electromagnetic tracking device and measuring ground reaction forces with a force plate. Results A total of 80% of chest compressions delivered by male rescuers (vs 40% delivered by females) were effective, irrespective of position. Male rescuers consumed less oxygen when delivering chest compressions while standing than while kneeling (P = .03), but effective compression ratio also was lower. In female rescuers, effective compressions correlated positively with oxygen consumption in the standing (r = 0.42, P = .04) and bed-mount (r = 0.53, P = .008) positions. Administering chest compressions while standing involved a larger moment magnitude and required more power than doing so while kneeling. Conclusion Administering chest compressions while standing demands more power but consumes less oxygen than doing so while kneeling, perhaps because fewer cardiac compressions delivered while standing are effective.

scholarly journals A novel prophylactic parachute ankle brace CPAB

2020 ◽  
Author(s):  
Xi Zhou ◽  
Di Wu ◽  
Zhengyao Li ◽  
Xiangdong Wu ◽  
Bin Yan ◽  
...  
Keyword(s):  
Ankle Joint ◽  
High Efficiency ◽  
Force Plate ◽  
Joint Angles ◽  
Time To Peak ◽  
Biomechanical Assessment ◽  
Ankle Brace ◽  
Reaction Forces ◽  
Vertical Ground ◽  
Vertical Ground Reaction Forces

Abstract Background: Comparing the effects of a self-designed and self-manufactured novel prophylactic ankle brace (Chinese parachute ankle brace, CPAB) and two ordinary ankle braces on the ankle joint during a half-squat parachute landing via biomechanical assessment.Methods: Twenty elite paratroopers were in four different conditions: no brace, elastic brace, semi-rigid brace, and CPAB. Each participant was instructed to jump off a platform with three different heights, 40 cm, 80 cm, and 120 cm, and land on the AMTI force plate in a half-squat posture. The vertical ground reaction forces (vGRF), joint angles, moments, powers, and works were calculated. After the experiment, every participant completed the questionnaires designed for this study.Result: Increasing the dropping height increased all of the parameters significantly (P<0.01), except for time to peak vGRF (T-PvGRF). Applying three braces can all slightly increase vGRF (P=0.237) and reduce T-PvGRF by 6-10 ms, as well as decrease the joint angles, velocities, and moments on the sagittal and coronal planes. Wearing CPAB and a semi-rigid brace more efficiently restricted dorsiflexion and inversion (P<0.05), and they both significantly reduced ankle work (t=5.107, P<0.01; t=3.331, P<0.01) and peak power (t=7.237, P<0.01; t=6.711, P<0.01) at 120 cm. The total scores from low-to-high were semi-rigid brace (19.20±2.99), elastic brace (21.91±3.25), and CPAB (23.37±3.08).Conclusion: The CPAB was more effective at restricting ankle joint motion on the coronal and sagittal planes than the other two prophylactic ankle braces. Therefore, the CPAB had the advantages of a novel appearance, high efficiency, and superior comfort, providing a reliable choice for parachute jumping and training in China.

INFLUENCE OF FOOT INSOLE ON THE GAIT PERFORMANCE IN SUBJECTS WITH FLAT FOOT DISORDER

2019 ◽  
Vol 19 (06) ◽  
pp. 1950050
Author(s):  
M. T. KARIMI ◽  
R. B. TAHMASEBI ◽  
B. SATVATI ◽  
F. FATOYE
Keyword(s):  
Range Of Motion ◽  
Ankle Joint ◽  
Lower Limb ◽  
Walking Speed ◽  
Force Plate ◽  
Flat Foot ◽  
Gait Performance ◽  
Positive Effects ◽  
Significant Difference ◽  
Foot Disorder

Flat foot is the most common foot disorder that influences the alignment of the lower limb structure. It is controversial whether the use of foot insole influences kinetic and kinematic of the leg or not. Therefore, this study investigated the influence of foot insole on the gait performance in subjects with flat foot disorder. A group of flat foot subject was recruited into this study (the number of subjects was 15). The motion of the leg joints was determined using the Qualysis motion analysis system. Moreover, the force applied on the lower limb was recorded by a Kistler force plate. The range of motion of the lower limb joints, the moments applied on the lower limb joints and force transmitted through the leg were the parameters used in this study. The difference between these parameters during walking with and without insole was evaluated using the paired [Formula: see text]-test. Significant value was set at [Formula: see text]. There was no significant difference between the range of motion of ankle joint while walking with and without insole. However, the medial directed force applied on the leg decreased significantly [Formula: see text]. The use of foot insole did not influence the moments transmitted through the hip and knee joints. The walking speed of the subjects improved while walking with foot insole. Use of foot insole influenced the magnitude of the force applied on the leg and the adductor moment of ankle joint due to its influence on foot alignment. As the walking speed of the improved subjects follows the use of insole, it can be concluded that it may have a positive effects on the performance of flat foot subjects.

scholarly journals People with chronic ankle instability benefit from brace application in highly dynamic change of direction movements

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
Patrick Fuerst ◽  
Albert Gollhofer ◽  
Markus Wenning ◽  
Dominic Gehring
Keyword(s):  
Ankle Joint ◽  
Repeated Measures ◽  
Ankle Instability ◽  
Dynamic Change ◽  
Chronic Ankle Instability ◽  
Mechanical Resistance ◽  
Healthy Controls ◽  
Neuromuscular Activation ◽  
Ankle Inversion ◽  
Ankle Brace

Abstract Background The application of ankle braces is an effective method for the prevention of recurrent ankle sprains. It has been proposed that the reduction of injury rates is based on the mechanical stiffness of the brace and on beneficial effects on proprioception and neuromuscular activation. Yet, how the neuromuscular system responds to the application of various types of ankle braces during highly dynamic injury-relevant movements is not well understood. Enhanced stability of the ankle joint seems especially important for people with chronic ankle instability. We therefore aimed to analyse the effects of a soft and a semi-rigid ankle brace on the execution of highly dynamic 180° turning movements in participants with and without chronic ankle instability. Methods Fifteen participants with functional ankle instability, 15 participants with functional and mechanical ankle instability and 15 healthy controls performed 180° turning movements in reaction to light signals in a cross-sectional descriptive laboratory study. Ankle joint kinematics and kinetics as well as neuromuscular activation of muscles surrounding the ankle joint were determined. Two-way repeated measures analyses of variance and post-hoc t-tests were calculated. Results Maximum ankle inversion angles and velocities were significantly reduced with the semi-rigid brace in comparison to the conditions without a brace and with the soft brace (p ≤ 0.006, d ≥ 0.303). Effect sizes of these reductions were larger in participants with chronic ankle instability than in healthy controls. Furthermore, peroneal activation levels decreased significantly with the semi-rigid brace in the 100 ms before and after ground contact. No statistically significant brace by group effects were found. Conclusions Based on these findings, we argue that people with ankle instability in particular seem to benefit from a semi-rigid ankle brace, which allows them to keep ankle inversion angles in a range that is comparable to values of healthy people. Lower ankle inversion angles and velocities with a semi-rigid brace may explain reduced injury incidences with brace application. The lack of effect of the soft brace indicates that the primary mechanism behind the reduction of inversion angles and velocities is the mechanical resistance of the brace in the frontal plane.

Sign in / Sign up

Export Citation Format

Share Document