scholarly journals Evaluation of Structural Behavior of Hysteretic Steel Dampers under Cyclic Loading

2020 ◽  
Vol 10 (22) ◽  
pp. 8264
Author(s):  
Sang-Woo Kim ◽  
Kil-Hee Kim
Keyword(s):  
Energy Dissipation ◽  
Shear Force ◽  
High Energy ◽  
Steel Plates ◽  
Structural Performance ◽  
Cyclic Shear ◽  
Energy Dissipation Capacity ◽  
Steel Damper ◽  
Ductile Behavior ◽  
High Energy Dissipation

This study proposes a relatively simple steel damper with high energy dissipation capacity. Three types of steel dampers were evaluated for structural performance. The first damper with U-shape had two vertical members and a semicircular connecting member for energy dissipation. The second damper with an angled U-shape replaced the connecting member with a horizontal steel member. The last damper with D-shape had a horizontal member added to the U-shaped damper. All the dampers were designed with steel plates on both sides that transmitted external shear force to the energy-dissipating members. To evaluate the structural performance of the dampers, an in-plane cyclic shear force was applied to the specimens. The D-shaped damper showed ductile behavior with excellent energy dissipation capacity after yielding without decreasing in strength during cyclic load. In other words, the D-shaped specimen showed excellent performance, with about 3.5 times the strength of the U-shaped specimen and about 3.8 times the energy dissipation capacity due to the additional horizontal member. Furthermore, the efficient energy dissipation of the proposed D-shaped steel damper was confirmed from the finite element (FE) analytical and experimental results.

scholarly journals Structural Performance of R-Type Steel Damper Used in Reinforced Concrete Members

2021 ◽  
Vol 11 (14) ◽  
pp. 6404
Author(s):  
Sang-Woo Kim ◽  
Kil-Hee Kim
Keyword(s):  
Reinforced Concrete ◽  
Energy Dissipation ◽  
High Energy ◽  
Structural Performance ◽  
External Energy ◽  
Simple Shape ◽  
Type Steel ◽  
Concrete Members ◽  
Energy Dissipation Capacity ◽  
Steel Damper

This study proposes a steel damper with a simple shape and excellent energy dissipation capacity. The proposed damper has a rectangular shape (R-type) and has an energy dissipation part and a load transmission part. The energy dissipation part dissipates external energy through the yielding of the steel material; it comprises a vertical member and upper and lower horizontal members. This study performed two-phase experiments to verify the structural performance of the proposed damper. The Phase I test was performed to evaluate the load history characteristics and energy dissipation capacity of the damper and the Phase II test was performed to confirm the structural performance of reinforced concrete members with the proposed damper. The experimental results showed that the proposed R-type steel damper had high-energy dissipation performance despite having a simple shape.

Test Study on the Rigidity Degradation and Energy Dissipation of High-Strength Reinforced Concrete Columns with Central Reinforcement

2010 ◽  
Vol 163-167 ◽  
pp. 398-405
Author(s):  
San Sheng Dong ◽  
Zi Xue Lei ◽  
Jun Hai Zhao
Keyword(s):  
Energy Dissipation ◽  
High Strength ◽  
Concrete Columns ◽  
High Energy ◽  
Affecting Factors ◽  
Static Test ◽  
Test Study ◽  
Core Areas ◽  
Energy Dissipation Capacity ◽  
High Energy Dissipation

Based on the pseudo-static test of 6 high-strength RC columns with central reinforcement skeletons, this paper studied their hysterisis performance, degradation of strength and rigidity, and energy dissipation capacity, with the affecting factors analyzed. The result shows that the central reinforcement skeletons can compensate for the low plasticity and brittle failure susceptibility of high-strength concrete so that all the specimens have stable strength, slow rigidity degradation and high energy dissipation capacity at later stage of loading; the larger the core areas the higher the strengths and ductility of the specimens, but slightly faster the degradation of strength and energy dissipation capacity as compared with the specimens with smaller core areas; the spacing of ties, longitudinal reinforcement ratio of core area both influence the strength degradation and energy dissipation capacity of the specimens, but they have little effect on their strengths.

Stiffness, Ductility, and Energy Dissipation of RC Elements under Cyclic Shear

2005 ◽  
Vol 21 (4) ◽  
pp. 1093-1112 ◽  
Author(s):  
Thomas T. C. Hsu ◽  
Mohamad Y. Mansour
Keyword(s):  
Energy Dissipation ◽  
High Energy ◽  
Shear Stresses ◽  
Principal Stresses ◽  
Element Analysis ◽  
Rc Structures ◽  
Cyclic Shear ◽  
Steel Bar ◽  
High Energy Dissipation ◽  
Reversed Cyclic

A new Cyclic Softened Membrane Model (CSMM) was recently developed to predict the stiffness, ductility, and energy dissipation of reinforced concrete (RC) elements subjected to reversed cyclic shear. Using the nonlinear finite element analysis, we can integrate these responses of elements to predict the behavior of a whole structure, such as a low-rise shear wall, subjected to earthquake action. This study of CSMM summarizes systematically the effects of the two primary variables: the steel bar angle with respect to the direction of the applied principal stresses and the steel percentage. The results clearly show that RC structures under cyclic shear stresses could be designed to be very ductile, have large stiffness, and possess high energy-dissipation capacities (just like flexural-dominated elements), if the steel bars are properly oriented in the directions of principal stresses and if the steel percentages are kept within certain limits.

Three-dimensional dynamic analysis of ancient buildings with novel high damping isolation trenches

2021 ◽  
pp. 107754632110109
Author(s):  
Jin-bao Li ◽  
Zhong-wei Hu ◽  
Zhao-dong Xu ◽  
Ying-qing Guo
Keyword(s):  
Energy Dissipation ◽  
Three Dimensional ◽  
High Energy ◽  
Plane Shape ◽  
Energy Dissipation Capacity ◽  
The Stability ◽  
High Energy Dissipation ◽  
Supporting Force ◽  
The Impact

To improve the efficiency of conventional isolation trench and lighten the impact of the excavation on neighbor buildings, a novel high damping isolation trench is proposed. The viscoelastic braces equipped in the high damping isolation trench can dissipate the energy of ground-borne vibration while providing supporting force to ensure the stability of the soil on both sides. According to two actual ancient buildings, two types of high damping isolation trenchs with the plane shape of U and L are designed to solve the potential damages caused by long-term train-induced vibration. First, three-dimensional finite/infinite models based on these two buildings are established, respectively. Then, the energy dissipation characteristics are obtained by experiments. Through calculation, the control effects of the high damping isolation trenchs for these two buildings are investigated. The results indicate that the viscoelastic braces possess high energy dissipation capacity. After setting the high damping isolation trenchs around the structures, even at a small excavation depth, the acceleration and velocity responses of the two buildings are reduced significantly. Furthermore, the selected U-shaped and L-shaped trenches also show superiority compared with the conventional linear-shaped trench in this project.

scholarly journals Experimental/Numerical Evaluation of Steel Trapezoidal Corrugated Infill Panels with an Opening

2021 ◽  
Vol 11 (7) ◽  
pp. 3275
Author(s):  
Majid Yaseri Gilvaee ◽  
Massood Mofid
Keyword(s):  
Energy Dissipation ◽  
Ultimate Strength ◽  
Steel Plate ◽  
Shear Walls ◽  
Experimental Results ◽  
Structural Performance ◽  
Initial Stiffness ◽  
Infill Panels ◽  
Energy Dissipation Capacity ◽  
Ductility Ratio

This paper investigates the influence of an opening in the infill steel plate on the behavior of steel trapezoidal corrugated infill panels. Two specimens of steel trapezoidal corrugated shear walls were constructed and tested under cyclic loading. One specimen had a single rectangular opening, while the other one had two rectangular openings. In addition, the percentage of opening in both specimens was 18%. The initial stiffness, ultimate strength, ductility ratio and energy dissipation capacity of the two tested specimens are compared to a specimen without opening. The experimental results indicate that the existence of an opening has the greatest effect on the initial stiffness of the corrugated steel infill panels. In addition, the experimental results reveal that the structural performance of the specimen with two openings is improved in some areas compared to the specimen with one opening. To that end, the energy dissipation capacity of the specimen with two openings is obtained larger than the specimen with one opening. Furthermore, a number of numerical analyses were performed. The numerical results show that with increasing the thickness of the infill plate or using stiffeners around the opening, the ultimate strength of a corrugated steel infill panel with an opening can be equal to or even more than the ultimate strength of that panel without an opening.

Theoretical and experimental behaviour of a hybrid semi-rigid glulam beam-to-column connection with top and seat angles

2020 ◽  
Vol 23 (10) ◽  
pp. 2057-2069
Author(s):  
Haotian Tao ◽  
Min Mao ◽  
Huifeng Yang ◽  
Weiqing Liu
Keyword(s):  
Theoretical Model ◽  
Cyclic Load ◽  
High Energy ◽  
Test Results ◽  
Glulam Beam ◽  
Energy Dissipation Capacity ◽  
The Moment ◽  
High Energy Dissipation ◽  
Reversed Cyclic ◽  
Theoretical Results

This article proposes to use the bolted top and seat angles to provide excellent moment resistance and high energy dissipation capacity for glulam beam-to-column connection. Angles are anchored on the glulam beam using the glued-in steel plate technology and connected to the column by anchorage bolts. A theoretical model is presented in this article to evaluate the moment-resistant properties of the connection based on the component method. To validate the accuracy of the theoretical model, several hybrid connections are tested under monotonic and reversed cyclic load. The test results showed that the proposed hybrid connection has a high rotational stiffness and excellent moment resistance. The theoretical results are also consistent with those of the experimental model.

A New Type of NES: Rotary Vibro-Impact

2017 ◽  
Author(s):  
Adnan S. Saeed ◽  
Mohammad A. AL-Shudeifat
Keyword(s):  
Energy Transfer ◽  
Energy Dissipation ◽  
Physical System ◽  
High Energy ◽  
Primary System ◽  
Targeted Energy Transfer ◽  
New Type ◽  
High Energy Dissipation ◽  
Nonlinear Energy ◽  
Promising Type

Rotating and vibro-impact Nonlinear Energy Sinks (NESs) have been employed for rapid and passive Targeted Energy Transfer (TET). Both have been proven to be efficient, shown high energy dissipation and have been tested experimentally. A novel type of NES that combines the two principles of nonlinear TET, rotating inertial coupling and vibro-impact, is numerically investigated on a 2 degree of freedom physical system. Two configurations of the new promising NES are considered via changing the location of the impacts. The optimized parameters of both configurations proved that high amounts of energy can be transferred from the primary system to the new promising type of NESs passively and rapidly.

Sign in / Sign up

Export Citation Format

Share Document