scholarly journals Light-Emitting Biosilica by In Vivo Functionalization of Phaeodactylum tricornutum Diatom Microalgae with Organometallic Complexes

2021 ◽  
Vol 11 (8) ◽  
pp. 3327
Author(s):  
Danilo Vona ◽  
Roberta Ragni ◽  
Emiliano Altamura ◽  
Paola Albanese ◽  
Maria Michela Giangregorio ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Phaeodactylum Tricornutum ◽  
Organometallic Complexes ◽  
Model Complexes ◽  
Light Emitting ◽  
Glass Slides ◽  
Silica Nanostructures ◽  
Diatom Culture ◽  
Frustule Morphology

In vivo incorporation of a series of organometallic photoluminescent complexes in Phaeodactylum tricornutum diatom shells (frustules) is investigated as a biotechnological route to luminescent biosilica nanostructures. [Ir(ppy)2bpy]+[PF6]−, [(2,2′-bipyridine)bis(2-phenylpyridinato)iridium(III) hexafluorophosphate], [Ru(bpy)3]2+ 2[PF6]−, [tris(2,2′-bipyridine)ruthenium(II) hexafluorophosphate], AlQ3 (tris-(8-hydroxyquinoline)aluminum), and ZnQ2 (bis-8-hydroxyquinoline-zinc) are used as model complexes to explore the potentiality and generality of the investigated process. The luminescent complexes are added to the diatom culture, and the resulting luminescent silica nanostructures are isolated by an acid-oxidative treatment that removes the organic cell matter without altering both frustule morphology and photoluminescence of incorporated emitters. Results show that, except for ZnQ2, the protocol successfully leads to the incorporation of complexes into the biosilica. The spontaneous self-adhering ability of both bare and doped Phaeodactylum tricornutum cells on conductive indium tin oxide (ITO)-coated glass slides is observed, which can be exploited to generate dielectric biofilms of living microorganisms with luminescent silica shells. In general, this protocol can be envisaged as a profitable route to new functional nanostructured materials for photonics, sensing, or biomedicine via in vivo chemical modification of diatom frustules with organometallic emitters.

Injecting Inter-Layers and the Built-in Potential of Blue Polymer Light-Emitting Diodes

2000 ◽  
Vol 660 ◽  
Author(s):  
Thomas M. Brown ◽  
Ian S. Millard ◽  
David J. Lacey ◽  
Jeremy H. Burroughes ◽  
Richard H. Friend ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Light Emitting Diodes ◽  
Basic Structure ◽  
Thin Layers ◽  
Carrier Injection ◽  
Semiconducting Polymer ◽  
Light Emitting ◽  
Physical Mechanisms ◽  
Organic Solid ◽  
Polymer Light Emitting Diodes

ABSTRACTThe semiconducting-polymer/injecting-electrode heterojunction plays a crucial part in the operation of organic solid state devices. In polymer light-emitting diodes (LEDs), a common fundamental structure employed is Indium-Tin-Oxide/Polymer/Al. However, in order to fabricate efficient devices, alterations to this basic structure have to be carried out. The insertion of thin layers, between the electrodes and the emitting polymer, has been shown to greatly enhance LED performance, although the physical mechanisms underlying this effect remain unclear. Here, we use electro-absorption measurements of the built-in potential to monitor shifts in the barrier height at the electrode/polymer interface. We demonstrate that the main advantage brought about by inter-layers, such as poly(ethylenedioxythiophene)/poly(styrene sulphonic acid) (PEDOT:PSS) at the anode and Ca, LiF and CsF at the cathode, is a marked reduction of the barrier to carrier injection. The electro- absorption results also correlate with the electroluminescent characteristics of the LEDs.

Controlled Injection of Holes into ALQ3 Based Oleds by Means of An Oxidized Transport Layer

2001 ◽  
Vol 708 ◽  
Author(s):  
Mathew K. Mathai ◽  
Keith A. Higginson ◽  
Bing R. Hsieh ◽  
Fotios Papadimitrakopoulos
Keyword(s):  
Indium Tin Oxide ◽  
Oxidative Degradation ◽  
Transport Layer ◽  
Hole Injection ◽  
Carrier Injection ◽  
Salt Loading ◽  
Light Emitting ◽  
Hole Transporting ◽  
Intrinsic Degradation ◽  
Variable Conductivity

ABSTRACTIn this paper we report a method for tuning the extent of hole injection into the active light emitting tris- (8-hydroxyquinoline) aluminum (Alq3) layer in organic light emitting diodes (OLEDs). This is made possible by modifying the indium tin oxide (ITO) anode with an oxidized transport layer (OTL) comprising a hole transporting polycarbonate of N,N'-bis(3-hydroxymethyl)-N,N'-bis(phenyl) benzidine and diethylene glycol (PC-TPB-DEG) doped with varying concentrations of antimonium hexafluoride salt of N,N,N',N'-tetra-p-tolyl-4,4'-biphenyldiamine (TMTPD+ SbF6-). The conductivity of the OTL can be changed over three orders of magnitude depending on salt loading. The analysis of hole and electron current variations in these devices indicates that optimizing the conductivity of the OTL enables the modulation of hole injection into the Alq3 layer. The bipolar charge transport properties for OLEDs in which the interfacial carrier injection barriers have been minimized, are governed by the conductivities of the respective layers and in this case it is shown that the variable conductivity of the OTL does allow for better control of the same. Accordingly, varying the concentration of holes in the device indicates that beyond an optimum concentration of holes, further hole injection results in the formation of light quenching cationic species and the initiation of oxidative degradation processes in the Alq3 layer, thus accelerating the intrinsic degradation of these devices. The variable conductivity of the OTL can hence be used to minimize the occurrence of these processes.

Induction of Apoptosis by Nano‐Synthesized Complexes of H2L and its Cu(II) Complex in Human Hepatocellular Carcinoma Cells

2020 ◽  
Vol 20 ◽  
Author(s):  
Thoria Diab ◽  
Tarek M. Mohamed ◽  
Alaa Hamed ◽  
Mohamed Gaber
Keyword(s):  
Cell Cycle ◽  
Metal Complexes ◽  
Hepg2 Cells ◽  
Therapeutic Potential ◽  
Free Ligand ◽  
Organometallic Complexes ◽  
Phase Cell ◽  
Sod Activity ◽  
Induced Apoptosis

Background: Chemotherapy is currently the most utilized treatment for cancer. Therapeutic potential of metal complexes in cancer therapy has attracted a lot of interest. The mechanisms of action of most organometallic complexes are poorly understood. Objective: This study was designed to explore the mechanisms governing the anti-proliferative effect of the free ligand N1,N6‐bis((2‐hydroxynaphthalin‐1‐yl)methinyl)) adipohydrazone (H2L) and its complexes of Mn(II), Co(II), Ni(II) and Cu(II). Methods: Cells were exposed to H2L or its metal complexes where cell viability determined by MTT assay. Cell cycle was analysed by flow cytometry. In addition, qRT-PCR was used to monitor the expression of Bax and Bcl-2. Moreover, molecular docking was carried out to find the potentiality of Cu(II) complex as an inhibitor of Adenosine Deaminase (ADA). ADA, Superoxide Dismutase (SOD) and reduced Glutathione (GSH) levels were measured in the most affected cancer cell line. Results: The obtained results demonstrated that H2L and its Cu(II) complex exhibited a strong cytotoxic activity compared to other complexes against HepG2 cells (IC50 = 4.14±0.036μM/ml and 3.2±0.02μM/ml), respectively. Both H2L and its Cu(II) complex induced G2/M phase cell cycle arrest in HepG2 cells. Additionally, they induced apoptosis in HepG2 cells via upregulation of Bax and downregulation of Bcl-2. Interestingly, the activity of ADA was decreased by 2.8 fold in HepG2 cells treated with Cu(II) complex compared to untreated cells. An increase of SOD activity and GSH level in HepG2 cells compared to control was observed. Conclusion: The results concluded that Cu(II) complex of H2L induced apoptosis in HepG2 cells. Further studies are needed to confirm its anti-cancer effect in vivo.

scholarly journals Implantable Optrode Array for Optogenetic Modulation and Electrical Neural Recording

Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 725
Author(s):  
Saeyeong Jeon ◽  
Youjin Lee ◽  
Daeho Ryu ◽  
Yoon Kyung Cho ◽  
Yena Lee ◽  
...  
Keyword(s):  
Light Emitting Diode ◽  
Neural Recording ◽  
Electrophysiological Recording ◽  
Light Emitting ◽  
Technological Advances ◽  
Neuroscience Research ◽  
Cell Type Specific ◽  
Novel Design

During the last decade, optogenetics has become an essential tool for neuroscience research due to its unrivaled feature of cell-type-specific neuromodulation. There have been several technological advances in light delivery devices. Among them, the combination of optogenetics and electrophysiology provides an opportunity for facilitating optogenetic approaches. In this study, a novel design of an optrode array was proposed for realizing optical modulation and electrophysiological recording. A 4 × 4 optrode array and five-channel recording electrodes were assembled as a disposable part, while a reusable part comprised an LED (light-emitting diode) source and a power line. After the characterization of the intensity of the light delivered at the fiber tips, in vivo animal experiment was performed with transgenic mice expressing channelrhodopsin, showing the effectiveness of optical activation and neural recording.

scholarly journals Simple Synthesis of Red Iridium(III) Complexes with Sulfur-Contained Four-Membered Ancillary Ligands for OLEDs

Molecules ◽  
2021 ◽  
Vol 26 (9) ◽  
pp. 2599
Author(s):  
Meng-Xi Mao ◽  
Fang-Ling Li ◽  
Yan Shen ◽  
Qi-Ming Liu ◽  
Shuai Xing ◽  
...  
Keyword(s):  
Indium Tin Oxide ◽  
Quantum Yields ◽  
Rapid Preparation ◽  
Maximum Brightness ◽  
Ancillary Ligands ◽  
Light Emitting ◽  
Maximum Current ◽  
Electron Donating Groups ◽  
Sulfur Containing ◽  
Main Ligand

Phosphorescent iridium(III) complexes have been widely researched for the fabrication of efficient organic light-emitting diodes (OLEDs). In this work, three red Ir(III) complexes named Ir-1, Ir-2, and Ir-3, with Ir-S-C-S four-membered framework rings, were synthesized efficiently at room temperature within 5 min using sulfur-containing ancillary ligands with electron-donating groups of 9,10-dihydro-9,9-dimethylacridine, phenoxazine, and phenothiazine, respectively. Due to the same main ligand of 4-(4-(trifluoromethyl)phenyl)quinazoline, all Ir(III) complexes showed similar photoluminescence emissions at 622, 619, and 622 nm with phosphorescence quantum yields of 35.4%, 50.4%, and 52.8%, respectively. OLEDs employing these complexes as emitters with the structure of ITO (indium tin oxide)/HAT-CN (dipyra-zino[2,3-f,2′,3′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile, 5 nm)/TAPC (4,4′-cyclohexylidenebis[N,N-bis-(4-methylphenyl)aniline], 40 nm)/TCTA (4,4″,4″-tris(carbazol-9-yl)triphenylamine, 10 nm)/Ir(III) complex (10 wt%): 2,6DCzPPy (2,6-bis-(3-(carbazol-9-yl)phenyl)pyridine, 10 nm)/TmPyPB (1,3,5-tri(mpyrid-3-yl-phenyl)benzene, 50 nm)/LiF (1 nm)/Al (100 nm) achieved good performance. In particular, the device based on complex Ir-3 with the phenothiazine unit showed the best performance with a maximum brightness of 22,480 cd m−2, a maximum current efficiency of 23.71 cd A−1, and a maximum external quantum efficiency of 18.1%. The research results suggest the Ir(III) complexes with a four-membered ring Ir-S-C-S backbone provide ideas for the rapid preparation of Ir(III) complexes for OLEDs.

scholarly journals Change in Interface Characteristics of ITO Modified with n-decyltrimethoxysilane

Crystals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 645
Author(s):  
Myung-Gyun Baek ◽  
Johng-Eon Shin ◽  
Dong-Hyun Hwang ◽  
Sung-Hoon Kim ◽  
Hong-Gyu Park ◽  
...  
Keyword(s):  
Contact Angle ◽  
Work Function ◽  
Indium Tin Oxide ◽  
Photoelectron Spectroscopy ◽  
Deposition Time ◽  
Interfacial Properties ◽  
Average Roughness ◽  
Light Emitting ◽  
Force Microscopy ◽  
Angle Measurements

Herein, we examined changes in the interfacial properties of organic light-emitting diodes when n-decyltrimethoxysilane (CH3SAM) was deposited on the surface of an indium tin oxide (ITO) electrode for various deposition times. It was revealed that the interfacial properties varied with deposition time. As the latter increased, so did the measured value of the contact angle, and ITO substrate exhibited a lower wettability. The contact angle measurements for bare ITO at 1, 10, 30, and 90 min were 57.41°, 63.43°, 73.76°, 81.47°, respectively, and the highest value obtained was 93.34°. In addition, the average roughness and work function of the ITO were measured using atomic force microscopy and X-ray photoelectron spectroscopy. As the deposition time of CH3SAM on the ITO substrates increased, it was evident that the former was well aligned with the latter, improving surface modification. The work function of CH3SAM, modified on the ITO substrates, improved by approximately 0.11 eV from 5.05–5.16 eV. The introduction of CH3SAM to the ITO revealed the ease of adjustment of the characteristics of ITO substrates.

scholarly journals Numerical Simulation on Electrical-Thermal Properties of Gallium-Nitride-Based Light-Emitting Diodes Embedded in Board

2012 ◽  
Vol 2012 ◽  
pp. 1-6 ◽  
Author(s):  
Xing-ming Long ◽  
Rui-jin Liao ◽  
Jing Zhou
Keyword(s):  
Finite Element ◽  
Gallium Nitride ◽  
Indium Tin Oxide ◽  
Light Emitting Diodes ◽  
Thermal Characteristics ◽  
Junction Temperature ◽  
Current Crowding ◽  
Total Thermal Resistance ◽  
Light Emitting ◽  
Packaging Structure

The electrical-thermal characteristics of gallium-nitride- (GaN-) based light-emitting diodes (LED), packaged by chips embedded in board (EIB) technology, were investigated using a multiphysics and multiscale finite element code, COMSOL. Three-dimensional (3D) finite element model for packaging structure has been developed and optimized with forward-voltage-based junction temperatures of a 9-chip EIB sample. The sensitivity analysis of the simulation model has been conducted to estimate the current and temperature distribution changes in EIB LED as the blue LED chip (substrate, indium tin oxide (ITO)), packaging structure (bonding wire and chip numbers), and system condition (injection current) changed. This method proved the reliability of simulated results in advance and useful material parameters. Furthermore, the method suggests that the parameter match on Shockley's equation parameters, Rs, nideal, and Is, is a potential method to reduce the current crowding effect for the EIB LED. Junction temperature decreases by approximately 3 K to 10 K can be achieved by substrate thinning, ITO, and wire bonding. The nonlinear-decreasing characteristics of total thermal resistance that decrease with an increase in chip numbers are likely to improve the thermal performance of EIB LED modules.

Sign in / Sign up

Export Citation Format

Share Document