scholarly journals Transient Nanoscale Tribofilm Growth: Analytical Prediction and Measurement

2021 ◽  
Vol 11 (13) ◽  
pp. 5890
Author(s):  
Michael Leighton ◽  
Nick Morris ◽  
Homer Rahnejat
Keyword(s):  
Lateral Force ◽  
Experimental Methodology ◽  
Significant Advance ◽  
Analytical Prediction ◽  
Force Microscopy ◽  
Layer Adsorption ◽  
Adsorption Desorption ◽  
Physical And Chemical ◽  
Desorption Model

A new method for the simultaneous in situ measurement and characterisation of molybdenum-based tribofilms is presented, based on lateral force microscopy. The simultaneity of measurements is crucial for a fundamental understanding of the tribochemical phenomena. A new analytical method is also presented, which combines a BET multi-layer adsorption/desorption model for boundary-active lubricant species-surface combination with the modified shear-promoted thermal activation Arrhenius equation. Therefore, the expounded method integrates the mechanical, physical and chemical aspects of the adsorption-bonding process as a detailed multi-step phenomenon. The method provides detailed explanations of the measured tribofilm growth, in a fundamental manner, not hitherto reported in the literature. Therefore, the combined experimental methodology and modelling approach provides a significant advance in the understanding of tribofilm formation. Furthermore, the developed model has the potential to explain the behaviour of many complex lubricant formulations and the resulting multi-species tribofilms, generated through synergistic and/or antagonistic constituent adsorption and shear-promoted activation.

Atomic force microscopy studies of ZnS films grown on (100) GaAs by the successive ionic layer adsorption and reaction method

1998 ◽  
Vol 13 (6) ◽  
pp. 1688-1692 ◽  
Author(s):  
Mika P. Valkonen ◽  
Seppo Lindroos ◽  
Tapio Kanniainen ◽  
Markku Leskelä ◽  
Roland Resch ◽  
...  
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Force Microscopy ◽  
Atomic Force ◽  
Layer Adsorption ◽  
Silar Technique ◽  
Ionic Layer

In this study zinc sulfide thin films were grown by the successive ionic layer adsorption and reaction (SILAR) technique on (100) GaAs substrates from aqueous precursor solutions. The atomic force microscopy (AFM) method was used to study the growth of the films up to a thickness of 180 nm. The ZnS thin films on (100) GaAs were smooth with an rms roughness of 0.2–1.9 nm depending on the film thickness. After the GaAs surface was covered with ZnS, the growth appeared to be nearly layerwise. In addition, in situ AFM studies were carried out to analyze the dissolution of (100) GaAs in water, which is a process competing with the thin film deposition by the SILAR.

scholarly journals CO2-Fluid-Rock Interactions and the Coupled Geomechanical Response during CCUS Processes in Unconventional Reservoirs

Geofluids ◽  
2021 ◽  
Vol 2021 ◽  
pp. 1-22
Author(s):  
Mingyu Cai ◽  
Yuliang Su ◽  
Lei Li ◽  
Yongmao Hao ◽  
Xiaogang Gao
Keyword(s):  
Carbon Capture ◽  
Fluid Phase ◽  
Unconventional Reservoirs ◽  
Co2 Injection ◽  
Rock Surface ◽  
Theoretical Approaches ◽  
Structure Changes ◽  
Adsorption Desorption ◽  
Physical And Chemical

The difficulty of deploying remaining oil from unconventional reservoirs and the increasing CO2 emissions has prompted researchers to delve into carbon emissions through Carbon Capture, Utilization, and Storage (CCUS) technologies. Under the confinement of nanopore in unconventional formation, CO2 and hydrocarbon molecules show different density distribution from in the bulk phase, which leads to a unique phase state and interface behavior that affects fluid migration. At the same time, mineral reactions, asphaltene deposition, and CO2 pressurization will cause the change of porous media geometry, which will affect the multiphase flow. This review highlights the physical and chemical effects of CO2 injection into unconventional reservoirs containing a large number of micro-nanopores. The interactions between CO2 and in situ fluids and the resulting unique fluid phase behavior, gas-liquid equilibrium calculation, CO2 adsorption/desorption, interfacial tension, and minimum miscible pressure (MMP) are reviewed. The pore structure changes and stress distribution caused by the interactions between CO2, in situ fluids, and rock surface are discussed. The experimental and theoretical approaches of these fluid-fluid and fluid-solid reactions are summarized. Besides, deficiencies in the application and safety assessment of CCUS in unconventional reservoirs are described, which will help improve the design and operation of CCUS.

scholarly journals HDO del guaiacol mediante el uso de catalizadores NiMo soportados sobre carbón activado obtenido a partir de la torta de higuerilla

2015 ◽  
Vol 35 (2) ◽  
pp. 49-55 ◽  
Author(s):  
Viviana Ospina ◽  
Robison Buitrago ◽  
Diana Patricia Lopez
Keyword(s):  
Activated Carbons ◽  
Batch Reactor ◽  
Chemical Activation ◽  
Chemical Properties ◽  
Bio Oil ◽  
Activating Agent ◽  
Adsorption Desorption ◽  
Physical And Chemical ◽  
And Chemical Properties

<p>Physical and chemical activation methods were used to prepare two different activated carbons (ACs) from castor de-oiled cake. H<sub>2</sub>O/CO<sub>2</sub> mixture was used as the physical activating agent, and for chemical activation potassium carbonate (K<sub>2</sub>CO<sub>3</sub>) was used. For both materials, textural and chemical properties were characterized by N<sub>2</sub> adsorption–desorption isotherms, thermogravimetric analysis (TGA), Fourier Transform Infrared Spectroscopy (FTIR), thermal programmed reduction (TPR), X-ray fluorescence (XRF), and scanning electron microscopy (SEM). The ACs were used as supports for NiMo sulfide catalysts, which were prepared by wetness impregnation and in-situ sulfided for the hydrodeoxygenation (HDO) of guaiacol (GUA) as a model compound of bio-oil. The HDO reaction was carried out in a typical batch reactor at 5 MPa of H<sub>2</sub> and 350 °C. Under the same test conditions, commercial catalysts were also tested in the reaction. Although the commercial catalysts displayed higher GUA conversion, the prepared catalysts showed higher activity and non-oxygenated and saturated products yield. </p>

scholarly journals Ultrafine metal-polymer catalysts based on polyconjugated systems for Fisher–Tropsch synthesis

2020 ◽  
Vol 92 (6) ◽  
pp. 977-984
Author(s):  
Mayya V. Kulikova ◽  
Albert B. Kulikov ◽  
Alexey E. Kuz’min ◽  
Anton L. Maximov
Keyword(s):  
Tropsch Synthesis ◽  
X Ray Diffraction ◽  
Fischer Tropsch ◽  
Force Microscopy ◽  
Composite Catalysts ◽  
Fe Catalyst ◽  
Atomic Force ◽  
And Function ◽  
Metal Polymer

AbstractFor previously studied Fischer–Tropsch nanosized Fe catalyst slurries, polymer compounds with or without polyconjugating structures are used as precursors to form the catalyst nanomatrix in situ, and several catalytic experiments and X-ray diffraction and atomic force microscopy measurements are performed. The important and different roles of the paraffin molecules in the slurry medium in the formation and function of composite catalysts with the two types of aforementioned polymer matrices are revealed. In the case of the polyconjugated polymers, the alkanes in the medium are “weakly” coordinated with the metal-polymer composites, which does not affect the effectiveness of the polyconjugated polymers. Otherwise, alkane molecules form a “tight” surface layer around the composite particles, which create transport complications for the reagents and products of Fischer-Tropsch synthesis and, in some cases, can change the course of the in situ catalyst formation.

scholarly journals Enhanced Tensile Strength of Monolithic Epoxy with Highly Dispersed TiO2-Graphene Nanocomposites

2021 ◽  
Vol 5 (7) ◽  
pp. 191
Author(s):  
Yanshuai Wang ◽  
Siyao Guo ◽  
Biqin Dong ◽  
Feng Xing
Keyword(s):  
Tensile Strength ◽  
Epoxy Resin ◽  
Mechanical Performance ◽  
Chemical Properties ◽  
High Mechanical Property ◽  
Graphene Nanocomposites ◽  
Highly Dispersed ◽  
Dispersion State ◽  
Physical And Chemical

The functionalization of graphene has been reported widely, showing special physical and chemical properties. However, due to the lack of surface functional groups, the poor dispersibility of graphene in solvents strongly limits its engineering applications. This paper develops a novel green “in-situ titania intercalation” method to prepare a highly dispersed graphene, which is enabled by the generation of the titania precursor between the layer of graphene at room temperature to yield titania-graphene nanocomposites (TiO2-RGO). The precursor of titania will produce amounts of nano titania between the graphene interlayers, which can effectively resist the interfacial van der Waals force of the interlamination in graphene for improved dispersion state. Such highly dispersed TiO2-RGO nanocomposites were used to modify epoxy resin. Surprisingly, significant enhancement of the mechanical performance of epoxy resin was observed when incorporating the titania-graphene nanocomposites, especially the improvements in tensile strength and elongation at break, with 75.54% and 176.61% increases at optimal usage compared to the pure epoxy, respectively. The approach presented herein is easy and economical for industry production, which can be potentially applied to the research of high mechanical property graphene/epoxy composite system.

scholarly journals Critical Dynamics of Defects and Mechanisms of Damage-Failure Transitions in Fatigue

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2554
Author(s):  
Oleg Naimark ◽  
Vladimir Oborin ◽  
Mikhail Bannikov ◽  
Dmitry Ledon
Keyword(s):  
Fatigue Damage ◽  
Kinetic Equations ◽  
Experimental Methodology ◽  
Preliminary Deformation ◽  
Scaling Properties ◽  
In Situ Data ◽  
Number Of Cycles ◽  
Fish Eye ◽  
Very High

An experimental methodology was developed for estimating a very high cycle fatigue (VHCF) life of the aluminum alloy AMG-6 subjected to preliminary deformation. The analysis of fatigue damage staging is based on the measurement of elastic modulus decrement according to “in situ” data of nonlinear dynamics of free-end specimen vibrations at the VHCF test. The correlation of fatigue damage staging and fracture surface morphology was studied to establish the scaling properties and kinetic equations for damage localization, “fish-eye” nucleation, and transition to the Paris crack kinetics. These equations, based on empirical parameters related to the structure of the material, allows us to estimate the number of cycles for the nucleation and advance of fatigue crack.

scholarly journals Facile Preparation of Mesoporous MCM-48 Containing Silver Nanoparticles with Fly Ash as Raw Materials for CO Catalytic Oxidation

Micromachines ◽  
2021 ◽  
Vol 12 (7) ◽  
pp. 841
Author(s):  
Dong Tian ◽  
Yonghong Chen ◽  
Xiaoyong Lu ◽  
Yihan Ling ◽  
Bin Lin
Keyword(s):  
Silver Nanoparticles ◽  
Fly Ash ◽  
Co Oxidation ◽  
Surface Composition ◽  
Raw Materials ◽  
Silica Source ◽  
Co Conversion ◽  
Co Catalytic Oxidation ◽  
Adsorption Desorption

An environmentally friendly method was proposed to prepare mesoporous Mobil Composition of Matter No.48 (MCM-48) using fly ash as the silica source. Silver nanoparticles were infiltrated on MCM-48 facilely by an in situ post-reduction method and evaluated as an effective catalyst for CO oxidation. The as-prepared MCM-48 and Ag/MCM-48 nanoparticles were characterized by XRD, N2 adsorption/desorption, and TEM. Investigations by means of XPS for Ag/MCM-48 were performed in order to illuminate the surface composition of the samples. Studies revealed the strong influence of the loading of Ag nanoparticles on catalysts in the oxidation of CO. CO conversion values for Ag/MCM-48 of 10% and 100% were achieved at temperatures of 220 °C and 270 °C, respectively, indicating that the Ag-decorated MCM-48 catalyst is extremely active for CO oxidation.

Atomic force microscopy of in situ deformed nickel thin films

1999 ◽  
Vol 353 (1-2) ◽  
pp. 194-200 ◽  
Author(s):  
C. Coupeau ◽  
J.F. Naud ◽  
F. Cleymand ◽  
P. Goudeau ◽  
J. Grilhé
Keyword(s):  
Thin Films ◽  
Atomic Force Microscopy ◽  
Force Microscopy ◽  
Nickel Thin Films ◽  
Atomic Force
Sign in / Sign up

Export Citation Format

Share Document