scholarly journals Thin Films Sensor Devices for Mycotoxins Detection in Foods: Applications and Challenges

Chemosensors ◽  
2019 ◽  
Vol 7 (1) ◽  
pp. 3 ◽  
Author(s):  
Andréia Santos ◽  
Andreia Vaz ◽  
Paula Rodrigues ◽  
Ana Veloso ◽  
Armando Venâncio ◽  
...  
Keyword(s):  
Thin Film ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Animal Health ◽  
High Sensitivity ◽  
Enzyme Linked Immunosorbent Assay ◽  
Film Sensor ◽  
Fast Analysis ◽  
Sensor Devices

Mycotoxins are a group of secondary metabolites produced by different species of filamentous fungi and pose serious threats to food safety due to their serious human and animal health impacts such as carcinogenic, teratogenic and hepatotoxic effects. Conventional methods for the detection of mycotoxins include gas chromatography and high-performance liquid chromatography coupled with mass spectrometry or other detectors (fluorescence or UV detection), thin layer chromatography and enzyme-linked immunosorbent assay. These techniques are generally straightforward and yield reliable results; however, they are time-consuming, require extensive preparation steps, use large-scale instruments, and consume large amounts of hazardous chemical reagents. Rapid detection of mycotoxins is becoming an increasingly important challenge for the food industry in order to effectively enforce regulations and ensure the safety of food and feed. In this sense, several studies have been done with the aim of developing strategies to detect mycotoxins using sensing devices that have high sensitivity and specificity, fast analysis, low cost and portability. The latter include the use of microarray chips, multiplex lateral flow, Surface Plasmon Resonance, Surface Enhanced Raman Scattering and biosensors using nanoparticles. In this perspective, thin film sensors have recently emerged as a good candidate technique to meet such requirements. This review summarizes the application and challenges of thin film sensor devices for detection of mycotoxins in food matrices.

scholarly journals High-Sensitivity Flexible Pressure Sensor-Based 3D CNTs Sponge for Human–Computer Interaction

Polymers ◽  
2021 ◽  
Vol 13 (20) ◽  
pp. 3465
Author(s):  
Jianli Cui ◽  
Xueli Nan ◽  
Guirong Shao ◽  
Huixia Sun
Keyword(s):  
Pressure Sensor ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
Chemical Vapor ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Wide Range ◽  
Flexible Pressure Sensors

Researchers are showing an increasing interest in high-performance flexible pressure sensors owing to their potential uses in wearable electronics, bionic skin, and human–machine interactions, etc. However, the vast majority of these flexible pressure sensors require extensive nano-architectural design, which both complicates their manufacturing and is time-consuming. Thus, a low-cost technology which can be applied on a large scale is highly desirable for the manufacture of flexible pressure-sensitive materials that have a high sensitivity over a wide range of pressures. This work is based on the use of a three-dimensional elastic porous carbon nanotubes (CNTs) sponge as the conductive layer to fabricate a novel flexible piezoresistive sensor. The synthesis of a CNTs sponge was achieved by chemical vapor deposition, the basic underlying principle governing the sensing behavior of the CNTs sponge-based pressure sensor and was illustrated by employing in situ scanning electron microscopy. The CNTs sponge-based sensor has a quick response time of ~105 ms, a high sensitivity extending across a broad pressure range (less than 10 kPa for 809 kPa−1) and possesses an outstanding permanence over 4,000 cycles. Furthermore, a 16-pixel wireless sensor system was designed and a series of applications have been demonstrated. Its potential applications in the visualizing pressure distribution and an example of human–machine communication were also demonstrated.

scholarly journals Recent Advances of Solution-Processed Heterojunction Oxide Thin-Film Transistors

Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 965
Author(s):  
Yanwei Li ◽  
Chun Zhao ◽  
Deliang Zhu ◽  
Peijiang Cao ◽  
Shun Han ◽  
...  
Keyword(s):  
Thin Film ◽  
Thin Film Transistors ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Oxide Thin Film ◽  
Electrical Performance ◽  
Solution Processed ◽  
Recent Advances ◽  
Oxide Tfts

Thin-film transistors (TFTs) made of metal oxide semiconductors are now increasingly used in flat-panel displays. Metal oxides are mainly fabricated via vacuum-based technologies, but solution approaches are of great interest due to the advantages of low-cost and high-throughput manufacturing. Unfortunately, solution-processed oxide TFTs suffer from relatively poor electrical performance, hindering further development. Recent studies suggest that this issue could be solved by introducing a novel heterojunction strategy. This article reviews the recent advances in solution-processed heterojunction oxide TFTs, with a specific focus on the latest developments over the past five years. Two of the most prominent advantages of heterostructure oxide TFTs are discussed, namely electrical-property modulation and mobility enhancement by forming 2D electron gas. It is expected that this review will manifest the strong potential of solution-based heterojunction oxide TFTs towards high performance and large-scale electronics.

The Structure and Properties of MoSi2 Thin Film in Mos Process

1980 ◽  
Vol 38 ◽  
pp. 326-327
Author(s):  
C.K. Wu ◽  
P. Chang ◽  
N. Godinho
Keyword(s):  
Thin Film ◽  
Integrated Circuits ◽  
High Performance ◽  
Large Scale ◽  
Process Development ◽  
Structure And Properties ◽  
Metal Silicides ◽  
High Oxidation ◽  
Important Approach ◽  
High Oxidation Resistance

Recently, the use of refractory metal silicides as low resistivity, high temperature and high oxidation resistance gate materials in large scale integrated circuits (LSI) has become an important approach in advanced MOS process development (1). This research is a systematic study on the structure and properties of molybdenum silicide thin film and its applicability to high performance LSI fabrication.

scholarly journals Integrating high-performing electrochemical transducers in lateral flow assay

2021 ◽  
Author(s):  
Antonia Perju ◽  
Nongnoot Wongkaew
Keyword(s):  
High Performance ◽  
Point Of Care ◽  
Low Cost ◽  
High Sensitivity ◽  
Lateral Flow ◽  
Analytical Performance ◽  
Label Free ◽  
High Performing ◽  
Lateral Flow Assays ◽  
Electrochemical Transducers

AbstractLateral flow assays (LFAs) are the best-performing and best-known point-of-care tests worldwide. Over the last decade, they have experienced an increasing interest by researchers towards improving their analytical performance while maintaining their robust assay platform. Commercially, visual and optical detection strategies dominate, but it is especially the research on integrating electrochemical (EC) approaches that may have a chance to significantly improve an LFA’s performance that is needed in order to detect analytes reliably at lower concentrations than currently possible. In fact, EC-LFAs offer advantages in terms of quantitative determination, low-cost, high sensitivity, and even simple, label-free strategies. Here, the various configurations of EC-LFAs published are summarized and critically evaluated. In short, most of them rely on applying conventional transducers, e.g., screen-printed electrode, to ensure reliability of the assay, and additional advances are afforded by the beneficial features of nanomaterials. It is predicted that these will be further implemented in EC-LFAs as high-performance transducers. Considering the low cost of point-of-care devices, it becomes even more important to also identify strategies that efficiently integrate nanomaterials into EC-LFAs in a high-throughput manner while maintaining their favorable analytical performance.

scholarly journals Performance Improvement of ZnSnO Thin-Film Transistors with Low-Temperature Self-Combustion Reaction

Electronics ◽  
2021 ◽  
Vol 10 (9) ◽  
pp. 1099
Author(s):  
Ye-Ji Han ◽  
Se Hyeong Lee ◽  
So-Young Bak ◽  
Tae-Hee Han ◽  
Sangwoo Kim ◽  
...  
Keyword(s):  
Thin Film ◽  
Photoelectron Spectroscopy ◽  
Large Scale ◽  
Low Cost ◽  
Thermal Analyses ◽  
Thin Film Transistor ◽  
Sol Gel ◽  
Annealing Temperatures ◽  
Zinc Tin Oxide ◽  
Thermal Limitation

Conventional sol-gel solutions have received significant attention in thin-film transistor (TFT) manufacturing because of their advantages such as simple processing, large-scale applicability, and low cost. However, conventional sol-gel processed zinc tin oxide (ZTO) TFTs have a thermal limitation in that they require high annealing temperatures of more than 500 °C, which are incompatible with most flexible plastic substrates. In this study, to overcome the thermal limitation of conventional sol-gel processed ZTO TFTs, we demonstrated a ZTO TFT that was fabricated at low annealing temperatures of 350 °C using self-combustion. The optimized device exhibited satisfactory performance, with μsat of 4.72 cm2/V∙s, Vth of −1.28 V, SS of 0.86 V/decade, and ION/OFF of 1.70 × 106 at a low annealing temperature of 350 °C for one hour. To compare a conventional sol-gel processed ZTO TFT with the optimized device, thermogravimetric and differential thermal analyses (TG-DTA) and X-ray photoelectron spectroscopy (XPS) were implemented.

scholarly journals Process Design Kit and Design Automation for Flexible Hybrid Electronics

2019 ◽  
Vol 16 (3) ◽  
pp. 117-123
Author(s):  
Tsung-Ching Huang ◽  
Ting Lei ◽  
Leilai Shao ◽  
Sridhar Sivapurapu ◽  
Madhavan Swaminathan ◽  
...  
Keyword(s):  
Process Design ◽  
Design Automation ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Thin Film Transistor ◽  
Solution Process ◽  
Oxide Semiconductor ◽  
Wearable Electronics ◽  
Wide Range

Abstract High-performance low-cost flexible hybrid electronics (FHE) are desirable for applications such as internet of things and wearable electronics. Carbon nanotube (CNT) thin-film transistor (TFT) is a promising candidate for high-performance FHE because of its high carrier mobility, superior mechanical flexibility, and material compatibility with low-cost printing and solution processes. Flexible sensors and peripheral CNT-TFT circuits, such as decoders, drivers, and sense amplifiers, can be printed and hybrid-integrated with thinned (<50 μm) silicon chips on soft, thin, and flexible substrates for a wide range of applications, from flexible displays to wearable medical devices. Here, we report (1) a process design kit (PDK) to enable FHE design automation for large-scale FHE circuits and (2) solution process-proven intellectual property blocks for TFT circuits design, including Pseudo-Complementary Metal-Oxide-Semiconductor (Pseudo-CMOS) flexible digital logic and analog amplifiers. The FHE-PDK is fully compatible with popular silicon design tools for design and simulation of hybrid-integrated flexible circuits.

High-performance thin-film composite forward osmosis membrane fabricated on low-cost PVB/PVC substrate

2018 ◽  
Vol 42 (16) ◽  
pp. 13382-13392 ◽  
Author(s):  
Ke Zheng ◽  
Shaoqi Zhou ◽  
Xuan Zhou
Keyword(s):  
Thin Film ◽  
High Performance ◽  
Low Cost ◽  
Forward Osmosis ◽  
Film Composite ◽  
Thin Film Composite

The incorporation of the PVB significantly improved the performance of the PVB/PVC substrates based thin-film composite forward osmosis membrane.

Recent progress in zinc-based redox flow batteries: a review

2021 ◽  
Author(s):  
Guixiang Wang ◽  
Haitao Zou ◽  
Xiaobo Zhu ◽  
Mei Ding ◽  
Chuankun Jia
Keyword(s):  
High Performance ◽  
Large Scale ◽  
Electrode Materials ◽  
Low Cost ◽  
Ion Selectivity ◽  
Commercial Application ◽  
Environmental Friendliness ◽  
Membrane Materials ◽  
Redox Flow Batteries ◽  
Flow Batteries

Abstract Zinc-based redox flow batteries (ZRFBs) have been considered as ones of the most promising large-scale energy storage technologies owing to their low cost, high safety, and environmental friendliness. However, their commercial application is still hindered by a few key problems. First, the hydrogen evolution and zinc dendrite formation cause poor cycling life, of which needs to ameliorated or overcome by finding suitable anolytes. Second, the stability and energy density of catholytes are unsatisfactory due to oxidation, corrosion, and low electrolyte concentration. Meanwhile, highly catalytic electrode materials remain to be explored and the ion selectivity and cost efficiency of membrane materials demands further improvement. In this review, we summarize different types of ZRFBs according to their electrolyte environments including ZRFBs using neutral, acidic, and alkaline electrolytes, then highlight the advances of key materials including electrode and membrane materials for ZRFBs, and finally discuss the challenges and perspectives for the future development of high-performance ZRFBs.

Highly responsive screen-printed asymmetric pressure sensor based on laser-induced graphene

2021 ◽  
Author(s):  
Jiang Zhao ◽  
Jiahao Gui ◽  
Jinsong Luo ◽  
Jing Gao ◽  
Caidong Zheng ◽  
...  
Keyword(s):  
Pressure Sensor ◽  
Screen Printing ◽  
Large Scale ◽  
Low Cost ◽  
Pressure Sensors ◽  
High Sensitivity ◽  
Wearable Electronics ◽  
Integrated Sensor ◽  
Patterned Electrodes ◽  
Screen Printed

Abstract Graphene-based pressure sensors have received extensive attention in wearable devices. However, reliable, low-cost, and large-scale preparation of structurally stable graphene electrodes for flexible pressure sensors is still a challenge. Herein, for the first time, laser-induced graphene (LIG) powder are prepared into screen printing ink, and shape-controllable LIG patterned electrodes can be obtained on various substrates using a facile screen printing process, and a novel asymmetric pressure sensor composed of the resulting screen-printed LIG electrodes has been developed. Benefit from the 3D porous structure of LIG, the as-prepared flexible LIG screen-printed asymmetric pressure sensor has super sensing properties with a high sensitivity of 1.86 kPa−1, low detection limit of about 3.4 Pa, short response time, and long cycle durability. Such excellent sensing performances give our flexible asymmetric LIG screen-printed pressure sensor the ability to realize real-time detection of tiny body physiological movements (such as wrist pulse and pronunciation action). Besides, the integrated sensor array has a multi-touch function. This work could stimulate an appropriate approach to designing shape-controllable LIG screen-printed patterned electrodes on various flexible substrates to adapt the specific needs of fulfilling compatibility and modular integration for potential application prospects in wearable electronics.

Three-Dimensional MoS2/Graphene Hybrid Aerogel as Free-Standing, High-Performance Electrode for Supercapacitor

NANO ◽  
2020 ◽  
Vol 15 (05) ◽  
pp. 2050062
Author(s):  
Zhaolei Meng ◽  
Xiaojian He ◽  
Song Han ◽  
Zijian Hu
Keyword(s):  
Porous Structure ◽  
Surface Area ◽  
High Performance ◽  
Large Scale ◽  
Low Cost ◽  
Hydrothermal Process ◽  
Three Dimensional ◽  
Rate Capability ◽  
Free Standing ◽  
Hybrid Aerogel

Carbon materials are generally employed as supercapacitor electrodes due to their low- cost, high-chemical stability and environmental friendliness. However, the design of carbon structures with large surface area and controllable porous structure remains a daunt challenge. In this work, a three-dimensional (3D) hybrid aerogel with different contents of MoS2 nanosheets in 3D graphene aerogel (MoS2-GA) was synthesized through a facial hydrothermal process. The influences of MoS2 content on microstructure and subsequently on electrochemical properties of MoS2-GA are systematically investigated and an optimized mass ratio with MoS2: GA of 1:2 is chosen to achieve high mechanical robustness and outstanding electrochemical performance in the hybrid structure. Due to the large specific surface area, porous structure and continuous charge transfer network, such MoS2-GA electrodes exhibit high specific capacitance, good rate capability and excellent cyclic stability, showing great potential in large-scale and low-cost fabrication of high-performance supercapacitors.

Sign in / Sign up

Export Citation Format

Share Document