Assessment of Cow Dung Pellets as a Renewable Solid Fuel in Direct Combustion Technologies

Recently, biomass application as a renewable energy source is increasing worldwide. However, its availability differs in dependence on the location and climate, therefore, agricultural residues as cow dung (CD) are being considered to supply heat and/or power installation. This paper aims at a wide evaluation of CD fuel properties and its prospect to apply in the form of pellets to direct combustion installations. Therefore, the proximate, ultimate composition and calorific value were analyzed, then pelletization and combustion tests were performed, and the ash characteristics were tested. It was found that CD is a promising source of bioenergy in terms of LHV (16.34 MJ·kg−1), carbon (44.24%), and fixed carbon (18.33%) content. During pelletization, CD showed high compaction properties and at a moisture content of 18%,and the received pellets’ bulk density reached ca. 470 kg·m−3 with kinetic durability of 98.7%. While combustion, in a fixed grate 25 kW boiler, high emissions of CO, SO2, NO, and HCl were observed. The future energy sector might be based on biomass and this work shows a novel approach of CD pellets as a potential source of renewable energy available wherever cattle production is located.

Download Full-text

PEMBUATAN BIOPELET DARI KAYU PUTIH DENGAN PENAMBAHAN GONDORUKEM SEBAGAI BAHAN BAKAR ALTERNATIF

JURNAL HUTAN PULAU-PULAU KECIL ◽

10.30598/jhppk.2018.2.1.91 ◽

2018 ◽

Vol 2 (1) ◽

pp. 91-100

Author(s):

Sofia Mustamu ◽

Gysberth Pattiruhu

Keyword(s):

Renewable Energy ◽

Moisture Content ◽

Energy Content ◽

Raw Materials ◽

Calorific Value ◽

Volatile Matter ◽

Ash Content ◽

Fixed Carbon

Biopelet is one of the renewable energy alternatives that have uniformity of size, shape, density, and energy content. The purpose of this study was to examine the characteristics of biopelet consisting of a mixture of cajeput and gondorukem, and to determine the composition of the raw materials that can produce a biopelet with the best quality. The compositions of a mixture in this research are as follow 95%:5%, 90%:10%, 80%:20%, 70%:30%, 60%:40%, 50%:50%, cajeput 100% and gondorukem 100%. The manufacture of biopelet used a 20 mesh of dust with the pressure of 526.4 kg/cm2 at a temperature of 200 ◦C for 15 minutes. Types of tests performed on biopelet include density, moisture content, volatile matter, ash content, carbon bonded, and calorific value. The results of the best quality of biopelet was in the percentage of cajeput and gondorukem was 70%:30%, tests showed densities of biopelet 0,84 g/cm3, moisture content5,89%, ash content 2,42%, volatile matter 73,99%, fixed carbon 18,96%, and calorific value 5152 kkal/kg.

Download Full-text

Evaluasi Prediksi Higher Heating Value (HHV) Biomassa Berdasarkan Analisis Proksimat

Risalah Fisika ◽

10.35895/rf.v4i1.166 ◽

2020 ◽

Vol 4 (1) ◽

pp. 1-7

Author(s):

Made Dirgantara ◽

Karelius Karelius ◽

Marselin Devi Ariyanti, Sry Ayu K. Tamba

Keyword(s):

Renewable Energy ◽

Natural Gas ◽

Key Words ◽

Critical Analysis ◽

Fossil Fuels ◽

Calorific Value ◽

Proximate Analysis ◽

Heating Value ◽

Bomb Calorimeter ◽

Hhv Prediction

Abstrak – Biomassa merupakan salah satu energi terbarukan yang sangat mudah ditemui, ramah lingkungan dan cukup ekonomis. Keberadaan biomassa dapat dimaanfaatkan sebagai pengganti bahan bakar fosil, baik itu minyak bumi, gas alam maupun batu bara. Analisi diperlukan sebagai dasar biomassa sebagai energi seperti proksimat dan kalor. Analisis terpenting untuk menilai biomassa sebagai bahan bakar adalah nilai kalori atau higher heating value (HHV). HHV secara eksperimen diukur menggunakan bomb calorimeter, namun pengukuran ini kurang efektif, karena memerlukan waktu serta biaya yang tinggi. Penelitian mengenai prediksi HHV berdasarkan analisis proksimat telah dilakukan sehingga dapat mempermudah dan menghemat biaya yang diperlukan peneliti. Dalam makalah ini dibahas evaluasi persamaan untuk memprediksi HHV berdasarkan analisis proksimat pada biomassa berdasarkan data dari penelitian sebelumnya. Prediksi nilai HHV menggunakan lima persamaan yang dievaluasi dengan 25 data proksimat biomassa dari penelitian sebelumnya, kemudian dibandingkan berdasarkan nilai error untuk mendapatkan prediksi terbaik. Hasil analisis menunjukan, persamaan A terbaik di 7 biomassa, B di 6 biomassa, C di 6 biomassa, D di 5 biomassa dan E di 1 biomassa.Kata kunci: bahan bakar, biomassa, higher heating value, nilai error, proksimat Abstract – Biomass is a renewable energy that is very easy to find, environmentally friendly, and quite economical. The existence of biomass can be used as a substitute for fossil fuels, both oil, natural gas, and coal. Analyzes are needed as a basis for biomass as energy such as proximate and heat. The most critical analysis to assess biomass as fuel is the calorific value or higher heating value (HHV). HHV is experimentally measured using a bomb calorimeter, but this measurement is less effective because it requires time and high costs. Research on the prediction of HHV based on proximate analysis has been carried out so that it can simplify and save costs needed by researchers. In this paper, the evaluation of equations is discussed to predict HHV based on proximate analysis on biomass-based on data from previous studies. HHV prediction values using five equations were evaluated with 25 proximate biomass data from previous studies, then compared based on error value to get the best predictions. The analysis shows that Equation A predicts best in 7 biomass, B in 6 biomass, C in 6 biomass, D in 5 biomass, and E in 1 biomass. Key words: fuel, biomass, higher heating value, error value, proximate

Download Full-text

Valorization of briquettes fuel using Pinus spp. sawdust from five regions of Mexico

BioResources ◽

10.15376/biores.16.2.2249-2263 ◽

2021 ◽

Vol 16 (2) ◽

pp. 2249-2263

Author(s):

María Alejandra Ramírez-Ramírez ◽

Artemio Carrillo-Parra ◽

Faustino Ruíz-Aquino ◽

Luis Fernando Pintor-Ibarra ◽

Nicolás González-Ortega ◽

...

Keyword(s):

Compressive Strength ◽

Impact Resistance ◽

Resistance Index ◽

Calorific Value ◽

Volatile Matter ◽

Ash Content ◽

Fixed Carbon ◽

Volumetric Expansion ◽

Pinus Spp ◽

The Impact

This research characterized briquettes made with Pinus spp. sawdust without the use of additives. For this purpose, 19 samples of sawdust from different wood industries located in five states of the Mexican Republic were used. The densification process was carried out in a vertical hydraulic piston laboratory briquette machine. The briquettes were made with 40 g of sawdust, at 50 °C, 20 kPa and pressing for 5 min. The results obtained varied as follows: moisture content (4.1% to 7.2%), density (813.9 to 1,014.4 kg/m3), volumetric expansion (7.4% to 37.3%), compressive strength (4.9 to 40.8 N/mm), impact resistance index (46.7% to 200%), ash (0.1% to 1.1%), volatile matter (82.9% to 90.7%), fixed carbon (8.9% to 16.4%), and calorific value (20.5 to 22.8 MJ/kg). The density of the briquettes was within the “acceptable” classification (800 to 1,200 kg/m3). It was observed that, the higher the density, the lower the volumetric expansion, the higher the compressive strength, and the higher the impact resistance index. According to the ash content, the briquettes could achieve international quality. Due to high volatile matter values, rapid combustion of the briquettes with little generation of toxic smoke would be expected. Fixed carbon and calorific value results were acceptable.

Download Full-text

Aprovechamiento de cáscara de piñón (Jatropha curcas L.) y paja de arroz (Oriza sativa L.) para la elaboración de pellets como biocombustible

La Técnica: Revista de las Agrociencias. ISSN 2477-8982 ◽

10.33936/la_tecnica.v0i24.2368 ◽

2020 ◽

pp. 87

Author(s):

Wilmer Hernán Ponce ◽

Ernesto Rosero ◽

Gisela Latorre ◽

Irvin Zambrano ◽

Carolina Zambrano ◽

...

Keyword(s):

Rice Straw ◽

Jatropha Curcas ◽

Calorific Value ◽

Fixed Carbon ◽

Jatropha Curcas L ◽

Pine Nut ◽

Solid Biofuels ◽

Fixed Carbon Content ◽

Simplex Lattice ◽

Oriza Sativa

Use of pine nut husk (Jatropha curcas L.) and rice straw (Oriza sativa L.) for the production of pellets as biofuel Resumen El uso de los biocombustibles sólidos es una de las alternativas para reemplazar a los combustibles convencionales en la producción de energía eléctrica y calorífica. Este trabajo tiene como objeto el aprovechamiento biomásico residual de la cáscara de piñón (Jatropha curcas L.) y paja de arroz (Oriza sativa L) para la producción de pellets como biocombustible sólido. Se aplicó mediante un diseño experimental (Simplex-lattice) la mezcla en proporciones de 100%-0%, 75%-25%, 50%-50%, 25%- 75%,0%-100% respectivamente. Se efectuaron análisis a la materia prima y producto terminado en porcentaje del contenido de humedad, cenizas, volátil, carbono fijo, adicionalmente el contenido de celulosa y lignina a las materias primas. Para la obtención de pellets, se empleó un equipo de pelletizado marca KL 1500, los pellets se elaboraron con recirculación para eliminar el exceso de humedad para el mejoramiento de textura y dureza. Las mezclas de las biomasas lignocelulósicas, que presentaron un mayor contenido de carbono fijo fueron la M2 (75%-25%) =16,53 ±3,2 % y M5 (0%-100%) =23,51 ±0,72%, en lo referente a material volátil fueron la M1 (100%-0%) =82,37±2,0% y M2 (75%-25%) =81,57±3,47%. El poder calorífico calculado reveló que con una mezcla del 75% de paja de arroz con un 25% de cáscara de piñón se obtiene un poder calorífico de 29,21±0,1 Mj/Kg y la mezcla de 50% de paja de arroz y 50% de cáscara de piñón, genera un valor de 29,01±0,01 Mj/Kg. Concluyendo que las mezclas mencionada puede ser aprovechada para la generación de calor. Palabras clave: Biocombustible sólido; biomasa; pellets; arroz; piñón. Abstract The use of solid biofuels is one of the alternatives to replace conventional fuels in the production of electrical and heat energy. The objective of this work is the residual biomass utilization of the pine nut husk (Jatropha curcas L.) and rice straw (Oriza sativa L) for the production of pellets as solid biofuels. The mixture was applied using an experimental design (Simplex-lattice) in proportions of 100% -0%, 75% -25%, 50% -50%, 25% - 75%, 0% -100% respectively. Analysis of the raw material and finished product were carried out as a percentage of the moisture, ash, volatile, and fixed carbon content, in addition to the cellulose and lignin content of the raw materials. To obtain pellets, a KL 1500 brand pelletizing equipment was used, the pellets were recirculated to remove excess moisture to improve texture and hardness. The mixtures of lignocellulosic biomasses, which had a higher fixed carbon content were M2 (75% -25%) = 16.53 ± 3.2% and M5 (0% -100%) = 23.51 ± 0, 72%, regarding volatile material, were M1 (100% -0%) = 82.37 ± 2.0% and M2 (75% -25%) = 81.57 ± 3.47%. The calculated calorific value revealed that with a mixture of 75% of rice straw with 25% of pinion husk, a calorific value of 29.21 ± 0.1 Mj / Kg is obtained and the mixture of 50% of rice straw and 50% of pinion shell, generates a value of 29.01 ± 0.01 Mj / Kg. Concluding that the mentioned mixtures can be used for heat generation. Keywords: Solid biofuel; biomass; pellets; rice; pinion.

Download Full-text

RAPD ANALYSIS OF GENETIC VARIATION IN NATURAL POPULATIONS OF AEGILOPS SP. FROM SOUTH ADRIATIC

AGROFOR ◽

10.7251/agreng1801035d ◽

2018 ◽

Vol 3 (1) ◽

Author(s):

Miodrag DIMITRIJEVIĆ ◽

Sofija PETROVIĆ ◽

Borislav BANJAC ◽

Goran BARAĆ

Keyword(s):

Genetic Variation ◽

Food Production ◽

Rapd Markers ◽

Rapd Analysis ◽

Gene Diversity ◽

Rapd Marker ◽

Natural Populations ◽

Genetic Structuring ◽

Potential Source ◽

Novel Approach

New challenges that food production is facing, requires novel approach inagricultural strategy. The scissors of growing demand for food and the limits of theEarth's resources are forcing plant breeders to run for the new borders, utilizing allthe available genetic variation in order to create fruitful and economically soundcultivars. Aegilops sp. (Poaceae) is a potential source of genetic variation for wheatimprovement. RAPD marker analysis was used in order to distinguish and evaluatedifferent genotypes of Aegilops sp. population samples from the collectiongathered during few years’ expeditions in South Adriatic, along the coastal, littoraland the inland parts of Montenegro. Ten randomly amplified polymorphic DNAmarkers (RAPDs) were tested: OPA-05, OPA-08, OPB-06, OPA-02, OPA-07,OPA-25, OPB-07, OPB-18, OPC-06, OPC-10 to examine genetic structuring on 18samples of 6 populations of different Aegilops sp. According to global AMOVA,75% of total gene diversity was attributable mostly to diversity within population(ΦPT =0.205 p=0.001), indicating that the groups of studied goat grass populationswere seemingly to differing genetically. In contrast, 25% of the variation camefrom variation among populations. According to PCoA, the distribution of 18 goatgrass accessions by Principal Coordinate Analysis shows 3 distinct groups. PCoaxis 1, PCo axis 2, and PCo axis 3 account for 20.8%, 18.2% and 14.1% of thevariation, respectively. The results showed that RAPD markers could be aconvenient tool for investigating genetic variation and for detecting geneticstructuring of populations. Genetic variability formed under natural selection wasentrenched.

Download Full-text

TOXIC AND IMMUNE ALLERGIC RESPONSES OF ANT VENOM TOXINS: A REVIEW

International Journal of Pharmacy and Pharmaceutical Sciences ◽

10.22159/ijpps.2021v13i11.42227 ◽

2021 ◽

pp. 1-7

Author(s):

SIMRAN SHARMA ◽

RAVI KANT UPADHYAY!

Keyword(s):

Immune Responses ◽

Biological Effects ◽

Therapeutic Agents ◽

Microbial Pathogens ◽

Intense Pain ◽

Venom Toxins ◽

Potential Source ◽

Ant Venom ◽

Peptide Toxins ◽

Promising Source

Present review article explains ant venom components and its allergic and biological effects in man and animals. Red ants or small fire ants secrete and inject venom very swiftly to defend their nest against predators, microbial pathogens, and competitors and to hunt the prey. Ant venom is a mixture of various organic compounds, including peptides, enzymes, and polypeptide toxins. It is highly toxic, allergic, invasive and venomous. It imposes sever paralytic, cytolytic, haemolytic, allergenic, pro-inflammatory, insecticidal, antimicrobial, and pain-producing pharmacologic activities after infliction. Victims show red ring-shaped allergic sign with regional swelling marked with intense pain. Ant venom also contains several hydrolases, oxidoreductases, proteases, Kunitz-like polypeptides, and inhibitor cysteine knot (ICK)-like (knottin) neurotoxins and insect defensins. Ant venom toxins/proteins generate allergic immune responses and employ eosinophils and produce Th2 cytokines, response. These compounds from ant venom could be used as a potential source of new anticonvulsants molecules. Ant venoms contain many small, linear peptides, an untapped source of bioactive peptide toxins. The remarkable insecticidal activity of ant venom could be used as a promising source of additional bio-insecticides and therapeutic agents.

Download Full-text

PERBANDINGAN NILAI BAKAR BRIKET BATUBARA DAN BRIKET ARANG (CAMPURAN CANGKANG BINTARO (Cerbera Manghas) DAN BAMBU BETUNG (Dendrocalamus Asper)

TEKNIKA: Jurnal Teknik ◽

10.35449/teknika.v6i1.99 ◽

2019 ◽

Vol 6 (1) ◽

pp. 1

Author(s):

Ida Febriana ◽

Zurohaina Zurohaina ◽

Sahrul Effendy

Keyword(s):

Alternative Energy ◽

Bituminous Coal ◽

Raw Materials ◽

Calorific Value ◽

Volatile Matter ◽

Carbonization Temperature ◽

Fixed Carbon ◽

Alternative Energy Source ◽

Tapioca Flour ◽

Cerbera Manghas

Charcoal briquettes are smokeless fuels which are a type of solid fuel whose fly substance is made low enough so that the smoke generated on its utilization will not interfere with health. In this study charcoal briquettes were made from bintaro shell waste and betung bamboo using tapioca flour adhesives. This study aims to obtain the best quality sub-bituminous coal briquettes and coal briquettes. In this study the carbonization temperature used was 400ᵒC and the composition of raw materials for bintaro shells and betung bamboo was 50:50, the composition of raw materials for sub-bituminous coal and straw 90:10. The method used in this research is experiment or experimental method, with fuel value collection using ASTM D5865-03 standard. The results obtained from this study are for charcoal briquettes with 4000C carbonization temperature Inherent Moisture value of 1.91%, ash 2.29%, volatile matter 23.79%, fixed carbon 72.01% and calorific value 5878.7 kal / gr, and for coal briquettes obtained value Inherent Moisture 0.52%, ash 4.42%, volatile matter 17.98%, fixed carbon 77.08% and calorific value 7152.6 kal / gr. The fuel value of coal briquettes is greater than that of charcoal briquettes, but the combustion value of charcoal briquettes includes a good calorific value as an alternative energy source, and is in accordance with the SNI standard of 5000 kal / gr, even close to the Japanese standard 6000 cal / gr. Keywords: Bintaro, briquette, calorific value

Download Full-text

Availability and utilisation pattern of agricultural waste at household level in selected areas of Bangladesh

Waste Management & Research ◽

10.1177/0734242x211064416 ◽

2021 ◽

pp. 0734242X2110644

Author(s):

MA Monayem Miah ◽

Md Enamul Haque ◽

Richard W Bell ◽

Md Wakilur Rahman ◽

Sohela Akhter ◽

...

Keyword(s):

Animal Feed ◽

Agricultural Waste ◽

Soil Health ◽

Farming Systems ◽

Household Waste ◽

Cow Dung ◽

Organic Fertiliser ◽

Household Level ◽

Intensive Farming ◽

Novel Approach

The use of organic fertilisers and soil amendments are almost universally recommended for improving the organic matter levels and maintaining soil health, but few studies documenting the actual availability and quality of such materials on smallholder farms are available. We selected a case study of 300 households from northern and southern Bangladesh to assess the types of waste materials available for recycling and their usage patterns at household level and we applied a novel approach to empirically identify household waste as input inefficiency in a production context. Northern districts have highly intensive farming systems whereas southern districts have low intensity farming. The total amount of agricultural waste produced at household level was estimated at 822 kg per month. Cow dung contributed about 65% of the total waste followed by animal feed refusal waste (11%), garbage (7%) and kitchen waste (6%). Most of the farmers utilised cow dung and wastes as organic fertiliser and lesser amounts as cooking fuel. Econometric analysis shows that the number of cattle and small ruminant per holding, total area of cultivated land and family size were significant factors that influence the amount of waste production at household level. Each household can reduce the chemical fertiliser cost by Tk. 1463 (US$ 17.84) per month by using compost prepared from household waste. There were ample opportunities for compost/vermicomposting and potential markets. The Department of Agricultural Extension from the public sector and private sector agents might motivate farmers to harvest the potential benefits of agricultural waste through effective management and utilisation.

Download Full-text

Co-Combustion of Waste Tires and Plastic-Rubber Wastes with Biomass Technical and Environmental Analysis

Sustainability ◽

10.3390/su12031036 ◽

2020 ◽

Vol 12 (3) ◽

pp. 1036 ◽

Cited By ~ 6

Author(s):

Luís Carmo-Calado ◽

Manuel Jesús Hermoso-Orzáez ◽

Roberta Mota-Panizio ◽

Bruno Guilherme-Garcia ◽

Paulo Brito

Keyword(s):

Energy Recovery ◽

Calorific Value ◽

Thermal Conversion ◽

Pollutant Emissions ◽

Limiting Factors ◽

Gaseous Emissions ◽

Waste Tires ◽

Feeding Difficulties ◽

Stable Conditions ◽

Combustion Tests

The present work studies the possibility of energy recovery by thermal conversion of combustible residual materials, namely tires and rubber-plastic, plastic waste from outdoor luminaires. The waste has great potential for energy recovery (HHV: 38.6 MJ/kg for tires and 31.6 MJ/kg for plastic). Considering the thermal conversion difficulties of these residues, four co-combustion tests with mixtures of tires/plastics + pelletized Miscanthus, and an additional test with 100% Miscanthus were performed. The temperature was increased to the maximum allowed by the equipment, about 500 °C. The water temperature at the boiler outlet and the water flow were controlled (60 °C and 11 L/min). Different mixtures of residues (0–60% tires/plastics) were tested and compared in terms of power and gaseous emissions. Results indicate that energy production increased with the increase of tire residue in the mixture, reaching a maximum of 157 kW for 40% of miscanthus and 60% of tires. However, the automatic feeding difficulties of the boiler also increased, requiring constant operator intervention. As for plastic and rubber waste, fuel consumption generally decreased with increasing percentages of these materials in the blend, with temperatures ranging from 383 °C to 411 °C. Power also decreased by including such wastes (66–100 kW) due to feeding difficulties and cinder-fusing problems related to ash melting. From the study, it can be concluded that co-combustion is a suitable technology for the recovery of waste tires, but operational problems arise with high levels of residues in the mixture. Increasing pollutant emissions and the need for pre-treatments are other limiting factors. In this sense, the thermal gasification process was tested with the same residues and the same percentages of mixtures used in the co-combustion tests. The gasification tests were performed in a downdraft reactor at temperatures above 800 °C. Each test started with 100% acacia chip for reference (like the previous miscanthus), and then with mixtures of 0–60% of tires and blends of plastics and rubbers. Results obtained for the two residues demonstrated the viability of the technology, however, with mixtures higher than 40% it was very difficult to develop a process under stable conditions. The optimum condition for producing a synthesis gas with a substantial heating value occurred with mixtures of 20% of polymeric wastes, which resulted in gases with a calorific value of 3.64 MJ/Nm3 for tires and 3.09 MJ/Nm3 for plastics and rubbers.

Download Full-text

DEVELOPMENT OF PALM BIOMASS BRIQUETTES WITH POLYETHYLENE PLASTIC WASTE ADDITION

Jurnal Teknologi ◽

10.11113/jt.v78.9657 ◽

2016 ◽

Vol 78 (9-2) ◽

Author(s):

Hasan Mohd Faizal ◽

M. Shafiq M. Nazri ◽

Md. Mizanur Rahman ◽

S. Syahrullail ◽

Z. A. Latiff

Keyword(s):

Compressive Strength ◽

Renewable Energy ◽

Moisture Content ◽

Renewable Energy Sources ◽

Calorific Value ◽

Energy Sources ◽

Mixing Ratio ◽

Gross Calorific Value ◽

Combustion Properties ◽

Plastics Waste

High global energy demand scenario has driven towards transformation from sole dependence on fossil fuels to utilization of inexhaustible renewable energy sources such as hydro, biomass, solar and wind. Renewable energy sources are abundant in Malaysia, especially palm biomass residues that are produced during the oil extraction process of fresh fruit bunch. Therefore, it is inevitable to harness these bioenergy sources, in order to prevent waste accumulation at adjacent to palm mills. Briquetting of palm biomass such as empty fruit bunch (EFB) with polyethylene (PE) plastics waste addition is expected not only could maximize the utilization of energy resources, but also could become as a potential solution for residue and municipal plastics waste disposal. In the present study, the physical and combustion properties of palm biomass briquettes that contain novel mixture of pulverized EFB and PE plastics waste were investigated experimentally. The briquettes were produced with different mixing ratio of EFB and PE plastics (weight ratios of 95:5, 90:10 and 85:15), under various heating temperatures (130-190 ) and at constant compaction pressure of 7 MPa. Based on the results, it can be said that heating temperature plays a significant role in affecting physical properties such as relaxed density and compressive strength. The values of relaxed density and compressive strength are within the range of 1100 to 1300 kg/m3 and 0.8 to 1.2 MPa, respectively. Meanwhile, mixing ratio does affect relaxed density and gross calorific value. All values of gross calorific (17900 to 21000 kJ/kg) and moisture content (7% to 9%) are found to fulfill the requirement for commercialization as stated by DIN51731 (gross calorific value>17500 kJ/kg and moisture content<10%). Even though the values of ash content (3% to 4%) exceed the limitation as stated by the standard (<0.7%), it is still considered very competitive if compared to the commonly used local briquette that contains mesocarp fibre and shell (5.8%). Finally, it can be concluded that the best quality of briquette can be achieved when highest composition of PE plastics (weight percentage of 15%) is used and the briquetting process is performed at the highest temperature (190 ).

Download Full-text