scholarly journals Integrated Design of a Custom Steering System in Cars and Verification of Its Correct Functioning

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6740
Author(s):  
Włodzimierz Choromański ◽  
Iwona Grabarek ◽  
Maciej Kozłowski
Keyword(s):  
Motor Vehicle ◽  
Integrated Design ◽  
Steering System ◽  
Steering Wheel ◽  
Custom Design ◽  
Dynamic Simulator ◽  
The Subject ◽  
Special Approach ◽  
The Impact ◽  
Individual Adjustment

The subject of this article is the design of a nonstandard steering system in cars. The applied methodology takes into account universal design, ensuring the greatest possible adaptation of the steering system to potential users, and at the same time, thanks to the specific nature of the designed steering device, it also assumes a special approach allowing for individual adjustment of the steering system to the needs and limitations of drivers with lower-limb disabilities. It is implemented through the “custom design” methodology. This article presents the impact of the design features of the multifunction steering wheel on the correctness of driving, as well as the level of load on selected muscles of the upper limbs responsible for operating the steering wheel. The tests were carried out on a dynamic simulator of a motor vehicle using the electromyography (EMG) technique, which enables the measurement of muscle load. A systemic approach to training and verifying the skills of drivers using new HMI solutions is proposed.

scholarly journals Influence of Clearance on the Rocker Arm Pin on the Steerability and Stability of the Vehicle Motion

Energies ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 7827
Author(s):  
Krzysztof Parczewski ◽  
Henryk Wnęk
Keyword(s):  
Response Time ◽  
Road Traffic ◽  
Steering System ◽  
Steering Wheel ◽  
Test Results ◽  
Bench Tests ◽  
Front Suspension ◽  
Class B ◽  
Vehicle Motion ◽  
The Impact

The article presents an analysis of the impact of a malfunction resulting from excessive clearance on the rocker arm pin of the front suspension on the vehicle’s steerability. The first part of the article presents an analysis of the influence of the clearance on the rocker arm pin on the geometry of the suspension and steering system. The occurrence of forces acting on the rocker arm pin in various phases of the vehicle motion was analyzed. To assess the vehicle’s steering, the vehicle’s response time to sudden steering wheel movement was used. The vehicle’s response time to sudden movement of the steering wheel was used to assess the vehicle’s steerability. The second part presents the results of bench tests and traction tests of a vehicle equipped with a specially made measuring rocker arm with the possibility of simulating a clearance. The tests were carried out on a class B passenger car in selected road tests. The results of measurements obtained for the roadworthy vehicle and the vehicle with the rocker arm with clearance were compared. The influence of the clearance on the rocker arm pin on the change of vehicle steerability in steady and dynamically changing conditions was analyzed. The test results show the effect of clearance on vehicle steering and on the vehicle steerability. The study tried to determine to what extent the clearance on the rocker arm affects the vehicle’s steerability and thus the safety in road traffic.

scholarly journals ANALYSIS OF THE IMPACT OF VARIOUS PRESSURES IN THE VEHICLE WHEELS ON THE WHEEL GEOMETRY

2021 ◽  
Vol 1 (50) ◽  
pp. 210-220
Author(s):  
LEW K ◽  
Keyword(s):  
Automatic Device ◽  
Steering System ◽  
Front Axle ◽  
Air Pressure ◽  
Steering Wheel ◽  
The Road ◽  
Significant Difference ◽  
On The Road ◽  
Toe Angle ◽  
The Impact

The steering system in a vehicle is one of the main systems that ensures its controllability and is important for road safety. The steering system consists of two main mechanisms, namely the steering gear, the task of which is to convert the rotary motion into reciprocating motion, and the steering gear, the task of which is to ensure the correct steering of the vehicle. In this case, the steering system is interconnected with the suspension of the car, in which there are four main angles of the wheels that are responsible for the correct maneuverability of the vehicle, namely: camber angle, toe angle, angle of rotation of the axle of the fist and the angle of inclination of the pivot axis of the fist. Measuring the geometry of a vehicle's suspension has several interrelated purposes. One of them is the modification of the stability of the vehicle, that is, the effective impact on the maintenance of the vehicle on the road. Handling also depends on the geometry setting and ensures proper maintenance on the road. Well adjusted geometry ensures even tire wear on each axle. The purpose of the steering system is to maintain the correct position of the steering wheel in relation to the steering wheels. The tests were carried out in stationary conditions at the diagnostic station of the Rzeszow University of Technology using an automatic device for measuring and regulating the air pressure in the tires of the Unitrol PA-10K car and the Launch X-631 car wheel alignment system. The object of the study was a passenger car of the Opel Agila brand. The tests were carried out for various values of air pressure in the car wheels. Based on the above, the task was set - to demonstrate how incorrect air pressure in the wheels of a car changes the angles of inclination of the wheels of the car. When analyzing the obtained test results, it was found that the pressure in the wheels, different from the nominal, but the same in each wheel, does not significantly affect the change in the values of the parameters of the angles of inclination of the vehicle wheels. If the pressure in the wheels on one side of the vehicle drops by 1 bar, there is a significant difference in the camber angles of the front axle. Changes in the air pressure in one of the rear wheels of the car do not significantly affect the angles of inclination of the car wheels. KEY WORDS: AIR PRESSURE IN THE WHEELS, UNEVEN PRESSURE, WHEEL MOUNTING ANGLES, CAMBER AND TOE ANGLES, STEERING.

scholarly journals The Diagnosing of Vehicle Steering System by Video Recording Method

2021 ◽  
Vol 334 ◽  
pp. 02018
Author(s):  
Fedor Smolenkov ◽  
Igor Blyankinshtein
Keyword(s):  
Video Processing ◽  
Motor Vehicle ◽  
Video Recording ◽  
Steering System ◽  
Steering Wheel ◽  
Test Results ◽  
Front Suspension ◽  
System Diagnosis ◽  
Video Registration ◽  
Recording Method

The possibility of vehicle steering system diagnosis based on analysis and visualization data processing is considered. The video recording method for the diagnostic troubleshooting of steering system and front suspension group is proposed. The method provides for placement of the motor vehicle on the diagnostic station, with further webcamera installation for measuring the steering wheel rotation angle and clear contract marking on the steering joint under experiment, setting the webcamera to fix and record the beginning of the movement steering joint under experiment, the video registration of the steering test results and further video processing using dedicated software. The outcomes of the evaluation of the method is delivered.

Managing Service Quality, Food Quality, Price Fairness and Customer Retention: A Holistic Perspective

2020 ◽  
Vol 2 (1) ◽  
pp. 1-5
Author(s):  
Ammar Ahmed ◽  
Rafat Naseer ◽  
Muhammad Asadullah ◽  
Hadia Khan
Keyword(s):  
Service Quality ◽  
Food Quality ◽  
Service Sector ◽  
Customer Retention ◽  
Price Fairness ◽  
Policy Makers ◽  
Restaurant Management ◽  
The Subject ◽  
Research Propositions ◽  
The Impact

In this competitive environment, organizations strive to satisfy their customer by providing best quality service at affordable and fair prices with a view to enhance their revenues. To achieve the objective of revenue maximization, organizations strive to identify the factors that help them in retaining their customers. Drawing from the signalling theory of marketing, the current study proposes a novel conceptual model representing the impact of service quality with food quality and price fairness on customer retention in restaurant sector of Pakistan. The paper underlines an important arena of knowledge for academicians as well as organizational scientists on the subject. On the basis of literature available on the variables understudy, the present study forwards eight research propositions worthy of urgent scholarly attention. The conceptualized model of the present article can also be viewed significant in unleashing further avenues for the restaurant management entities, policy makers and future researchers in the domain of managing in the service sector businesses.

Solow economy model

2019 ◽  
pp. 150-157
Author(s):  
Oleksandr Synenko ◽  
Kateryna Yarema ◽  
Yuliia Bezsmertna
Keyword(s):  
Economic Growth ◽  
Regression Analysis ◽  
Solow Model ◽  
Economy Model ◽  
Accelerated Depreciation ◽  
Basic Parameters ◽  
The Subject ◽  
Investment Process ◽  
The Impact ◽  
Model Algorithm

The subject of the research is the approach to the possibility of using the Solow model to perform the regression analysis on the example of the Ukrainian economy model. The purpose of writing this article is to investigate the notion of regres- sion analysis, Solow’s economy model, algorithm for performing regression analy- sis on the example of Ukraine’s economy model. This model can be adapted for the economy of enterprises. Methodology. The research methodology is system-struc- tural and comparative analyzes (to study the structure of GDP); monograph (when studying methods of regression analysis on the example of the Ukrainian economy); economic analysis (when assessing the impact of factors on Ukraine’s GDP). The scientific novelty consists the features of the use of the Solow model on the ex- ample of Ukrainian economy are determined. An algorithm for calculating the basic parameters of a model using the Excel application package is disclosed. The main recommendations on the development of the national economy and economic growth through the use of macroeconomic instruments are given. Conclusions. The use of the Solow model enables forecasting and analysis. The results obtained re- vealed the problem of low resource return of capital as a resource, along with the means of macroeconomic regulation of the investment process, using which can improve the situation. A special place in these funds belongs to the accelerated depreciation and interest rate policies.

Assessment of small businesses activities in Ukraine

2019 ◽  
pp. 40-47
Author(s):  
Igor Ponomarenko ◽  
Kateryna Volovnenko
Keyword(s):  
Comparative Analysis ◽  
Statistical Analysis ◽  
Small Business ◽  
Small Businesses ◽  
Government Agencies ◽  
Small Enterprises ◽  
The Subject ◽  
Business Entities ◽  
The Impact ◽  
Micro Enterprises

The subject of the research is a set of approaches to the statistical analysis ofthe activities of small business entities in Ukraine, including micro-enterprises. The purpose of writing this article is to study of the features of functioningof small business entities in Ukraine. Methodology. The research methodology isto use a system-structural and comparative analysis (to study the change in thenumber of small enterprises by major components); monographic (when studyingmethods of statistical analysis of small businesses); economic analysis (when assessing the impact of small business entities on socio-economic phenomena andprocesses in Ukraine). The scientific novelty consists to determine the features ofthe functioning of small businesses in Ukraine in modern conditions. The influenceof the activities of the main socio-economic and political indicators on the activities of small enterprises in recent periods of time has been identified. It has beenestablished that there is flexibility in the development of strategies by small businesses in conditions of significant competition, which makes it possible to quicklyrespond to changing situations in specific markets. Conclusions. The use of acomprehensive statistical analysis of small businesses functioning in Ukraine willallow government agencies to develop a set of measures to optimize the activitiesof these enterprises, which ultimately will positively affect the strengthening oftheir competitiveness and will contribute to the growth of the national economicsystem.

The Impact of Quantitative Easing on Emerging Markets – Literature Review

e-Finanse ◽  
2018 ◽  
Vol 14 (4) ◽  
pp. 67-76
Author(s):  
Piotr Bartkiewicz
Keyword(s):  
Emerging Markets ◽  
Large Scale ◽  
Empirical Literature ◽  
Quantitative Easing ◽  
Methodological Choices ◽  
The Subject ◽  
Methodological Approaches ◽  
The Impact ◽  
Sufficient Precision

AbstractThe article presents the results of the review of the empirical literature regarding the impact of quantitative easing (QE) on emerging markets (EMs). The subject is of interest to policymakers and researchers due to the increasingly larger role of EMs in the world economy and the large-scale capital flows occurring after 2009. The review is conducted in a systematic manner and takes into consideration different methodological choices, samples and measurement issues. The paper puts the summarized results in the context of transmission channels identified in the literature. There are few distinct methodological approaches present in the literature. While there is a consensus regarding the direction of the impact of QE on EMs, its size and durability have not yet been assessed with sufficient precision. In addition, there are clear gaps in the empirical findings, not least related to relative underrepresentation of the CEE region (in particular, Poland).

Assessment of sensitivity of the efficiency of regional tax spending towards investment attractiveness of the types of economic activity carried out by the residents of advanced development territory

2020 ◽  
pp. 98-110
Author(s):  
Evgeniya Mikhailovna Popova ◽  
Guzel Mukhtarovna Guseinova ◽  
Sergei Borisovich Milov
Keyword(s):  
Economic Activity ◽  
Socioeconomic Development ◽  
Federal District ◽  
Tax Incentives ◽  
Capital Investments ◽  
The Subject ◽  
Investment Process ◽  
The Impact ◽  
Advanced Development

The deficit of subnational budgets and deceleration capital investments in multiple Russian regions increase the relevance of research aimed at improvement of tax incentivizing practice of the regional investment process. The studies focused on determination of the impact of socioeconomic and institutional factors upon the efficiency of investment tax expenses obtained wide circulation within the foreign scientific literature. The subject of this article is the assessment of sensitivity of the efficiency of regional tax expanses towards investment attractiveness of the types of economic activity carried out by the residents of territories of advanced socioeconomic development, created in the subjects of Far Easter Federal District. The scientific novelty and practical values of this research consists in substantiation of the reasonableness of assessment of investment attractiveness of the types of economic activity that are stimulated by tax incentives. Methodology for assessing investment attractiveness is proposed and tested. The conclusion is made that in case of low investment attractiveness of the type of economic activity, which was planned to support by tax incentives, it is required to conduct and additional analysis to avoid unjustified tax expanses.

Anne O. Krueger, Constantine Michalopoulos and Vernon W. Ruttan. Aid and Development. Baltimore: The Johns Hopkins University Press. 1989. xiv + 386 pp.Price: U.S. $ 52.00

1991 ◽  
Vol 30 (2) ◽  
pp. 213-217
Author(s):  
Mir Annice Mahmood
Keyword(s):  
United States ◽  
Economic Development ◽  
International Development ◽  
Western Europe ◽  
Development Assistance ◽  
The United States ◽  
Social Infrastructure ◽  
Low Literacy ◽  
The Subject ◽  
The Impact

Foreign aid has been the subject of much examination and research ever since it entered the economic armamentarium approximately 45 years ago. This was the time when the Second World War had successfully ended for the Allies in the defeat of Germany and Japan. However, a new enemy, the Soviet Union, had materialized at the end of the conflict. To counter the threat from the East, the United States undertook the implementation of the Marshal Plan, which was extremely successful in rebuilding and revitalizing a shattered Western Europe. Aid had made its impact. The book under review is by three well-known economists and is the outcome of a study sponsored by the Department of State and the United States Agency for International Development. The major objective of this study was to evaluate the impact of assistance, i.e., aid, on economic development. This evaluation however, was to be based on the existing literature on the subject. The book has five major parts: Part One deals with development thought and development assistance; Part Two looks at the relationship between donors and recipients; Part Three evaluates the use of aid by sector; Part Four presents country case-studies; and Part Five synthesizes the lessons from development assistance. Part One of the book is very informative in that it summarises very concisely the theoretical underpinnings of the aid process. In the beginning, aid was thought to be the answer to underdevelopment which could be achieved by a transfer of capital from the rich to the poor. This approach, however, did not succeed as it was simplistic. Capital transfers were not sufficient in themselves to bring about development, as research in this area came to reveal. The development process is a complicated one, with inputs from all sectors of the economy. Thus, it came to be recognized that factors such as low literacy rates, poor health facilities, and lack of social infrastructure are also responsible for economic backwardness. Part One of the book, therefore, sums up appropriately the various trends in development thought. This is important because the book deals primarily with the issue of the effectiveness of aid as a catalyst to further economic development.

A Rhetorics of the Word

2019 ◽  
Author(s):  
George Pattison
Keyword(s):  
Political Discourse ◽  
Philosophical Tradition ◽  
Final Part ◽  
Communications Technology ◽  
Christian Life ◽  
Call And Response ◽  
Hermann Broch ◽  
The Subject ◽  
The Impact

A Rhetorics of the Word is the second volume of a three-part philosophy of Christian life. It approaches Christian life as expressive of a divine calling or vocation. The word Church (ekklesia) and the role of naming in baptism indicate the fundamental place of calling in Christian life. However, ideas of vocation are difficult to access in a world shaped by the experience of disenchantment. The difficulties of articulating vocation are explored with reference to Weber, Heidegger, and Kierkegaard. These are further connected to a general crisis of language, manifesting in the degradation of political discourse (Arendt) and the impact of new communications technology on human discourse. This impact can be seen as reinforcing an occlusion of language in favour of rationality already evidenced in the philosophical tradition and technocratic management. New possibilities for thinking vocation are pursued through the biblical prophets (with emphasis on Buber’s and Rosenzweig’s reinterpretation of the call of Moses), Saint John, and Russian philosophies of language (Florensky to Bakhtin). Vocation emerges as bound up with the possibility of being name-bearers, enabling a mutuality of call and response. This is then evidenced further in ethics and poetics, where Levinas and Hermann Broch (The Death of Virgil) become major points of reference. In conclusion, the themes of calling and the name are seen to shape the possibility of love—the subject of the final part of the philosophy of Christian life: A Metaphysics of Love.

Sign in / Sign up

Export Citation Format

Share Document