scholarly journals High-Performance Power Converter for Charging Electric Vehicles

Energies ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 8569
Author(s):  
Nikolay Madzharov ◽  
Nikolay Hinov
Keyword(s):  
High Performance ◽  
Supply Voltage ◽  
Electronic Devices ◽  
Optimal Solution ◽  
Power Converter ◽  
Maximum Current ◽  
Self Adaptation ◽  
Resonant Inductor ◽  
Resonant Capacitor ◽  
Charging Stations

This paper presents the analysis, modeling, simulation and practical studies of resonant inverters with a voltage limitation on the resonant capacitor. The power circuits obtained in this way are characterized by the fact that the power consumption does not depend on the load changes, but is a function of the operating frequency, the value of the resonant capacitor and the supply voltage—these are the so-called inverters with energy dosing. Analytical dependences, simulations and experimental results were determined, which described the behavior of the studied power electronic devices. The obtained expressions for the inverter current in the different stages of the converter operation were the basis for the creation of the engineering methodology for their design and prototyping. Based on the derived basic ratios and characteristics, the capabilities of these devices for self-adaptation to the needs and changes of the load were demonstrated. A comparison of the characteristics of classical resonant inverters and those with energy dosing was made, thus demonstrating their qualities and advantages. The presented results display the properties of this class of circuits and the challenges to their effective application to find the optimal solution for the implementation of charging stations for different specific needs. On the other hand, the limitations in the use of these circuits were that no power was consumed from the power supply during the whole period, the lack of limitation of the maximum current through the transistors and the need for sufficient time to dissipate energy in the resonant inductor when working with high-resistance and low-power loads.

Dirac-source field-effect transistors as energy-efficient, high-performance electronic switches

Science ◽  
2018 ◽  
Vol 361 (6400) ◽  
pp. 387-392 ◽  
Author(s):  
Chenguang Qiu ◽  
Fei Liu ◽  
Lin Xu ◽  
Bing Deng ◽  
Mengmeng Xiao ◽  
...  
Keyword(s):  
Energy Efficient ◽  
Field Effect ◽  
Electron Density Distribution ◽  
High Performance ◽  
Room Temperature ◽  
Supply Voltage ◽  
Field Effect Transistors ◽  
State Of The Art ◽  
Electronic Devices ◽  
Electronic Switches

An efficient way to reduce the power consumption of electronic devices is to lower the supply voltage, but this voltage is restricted by the thermionic limit of subthreshold swing (SS), 60 millivolts per decade, in field-effect transistors (FETs). We show that a graphene Dirac source (DS) with a much narrower electron density distribution around the Fermi level than that of conventional FETs can lower SS. A DS-FET with a carbon nanotube channel provided an average SS of 40 millivolts per decade over four decades of current at room temperature and high device current I60 of up to 40 microamperes per micrometer at 60 millivolts per decade. When compared with state-of-the-art silicon 14-nanometer node FETs, a similar on-state current Ion is realized but at a much lower supply voltage of 0.5 volts (versus 0.7 volts for silicon) and a much steeper SS below 35 millivolts per decade in the off-state.

AUTONOMOUS HEAT SUPPORT SYSTEM OF ELECTRONIC BLOCKS OF SPACE APPLIANCES

2018 ◽  
pp. 72-78
Author(s):  
A. V. Gorbunov ◽  
Yu. A. Zhukov ◽  
E. V. Korotkov ◽  
A. V. Lekanov ◽  
V. G. Porpylev ◽  
...  
Keyword(s):  
Thermal Regime ◽  
Autonomous System ◽  
Supply Voltage ◽  
Operating Temperature ◽  
Electronic Devices ◽  
Space Technology ◽  
Structural Scheme ◽  
Spacecraft Design ◽  
Temperature Controlled ◽  
Operating Temperature Range

The vast majority of electronic devices on-Board Russian spacecraft is placed on a temperature-controlled mounting surface is ON, however, in some tasks there is a necessity to place a separate electronic units out thermostated panels on remote spacecraft design. The article presents an autonomous system of providing thermal regime of electronic blocks of spacecraft and objects of space technology that require maintaining the operating temperature and are unable to be installed on the thermostatic landing surfaces of spacecraft. The proposed autonomous system of providing thermal regime can operate autonomously in the extended operating temperature range of the installation surface from -80 to +80 °C when the supply voltage changes in the range from 75 to 550% of the nominal value. The review of the existing solutions is presented, the substantiation of the proposed decision is given, the structural scheme of autonomous system of providing thermal regime is given and its description and an example of application is given.

Organic Electronics

2020 ◽  
Author(s):  
Stephen R. Forrest
Keyword(s):  
Thin Film ◽  
Organic Electronics ◽  
Thin Film Transistors ◽  
High Performance ◽  
Electronic Devices ◽  
Thin Film Deposition ◽  
Film Deposition ◽  
Organic Thin Film ◽  
Graduate Studies ◽  
Organic Light

Organic electronics is a platform for very low cost and high performance optoelectronic and electronic devices that cover large areas, are lightweight, and can be both flexible and conformable to irregularly shaped surfaces such as foldable smart phones. Organics are at the core of the global organic light emitting device (OLED) display industry, and also having use in efficient lighting sources, solar cells, and thin film transistors useful in medical and a range of other sensing, memory and logic applications. This book introduces the theoretical foundations and practical realization of devices in organic electronics. It is a product of both one and two semester courses that have been taught over a period of more than two decades. The target audiences are students at all levels of graduate studies, highly motivated senior undergraduates, and practicing engineers and scientists. The book is divided into two sections. Part I, Foundations, lays down the fundamental principles of the field of organic electronics. It is assumed that the reader has an elementary knowledge of quantum mechanics, and electricity and magnetism. Background knowledge of organic chemistry is not required. Part II, Applications, focuses on organic electronic devices. It begins with a discussion of organic thin film deposition and patterning, followed by chapters on organic light emitters, detectors, and thin film transistors. The last chapter describes several devices and phenomena that are not covered in the previous chapters, since they lie outside of the current mainstream of the field, but are nevertheless important.

scholarly journals Configurations, Power Topologies and Applications of Hybrid Distribution Transformers

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1215
Author(s):  
Alvaro Carreno ◽  
Marcelo Perez ◽  
Carlos Baier ◽  
Alex Huang ◽  
Sanjay Rajendran ◽  
...  
Keyword(s):  
Distribution Systems ◽  
Power Converter ◽  
Operating Conditions ◽  
Distribution Transformer ◽  
Nonlinear Loads ◽  
Electric Vehicle Charging ◽  
Distribution Transformers ◽  
Alternative Systems ◽  
Charging Stations ◽  
Hybrid Distribution

Distribution systems are under constant stress due to their highly variable operating conditions, which jeopardize distribution transformers and lines, degrading the end-user service. Due to transformer regulation, variable loads can generate voltage profiles out of the acceptable bands recommended by grid codes, affecting the quality of service. At the same time, nonlinear loads, such as diode bridge rectifiers without power factor correction systems, generate nonlinear currents that affect the distribution transformer operation, reducing its lifetime. Variable loads can be commonly found at domiciliary levels due to the random operation of home appliances, but recently also due to electric vehicle charging stations, where the distribution transformer can cyclically vary between no-load, rated and overrated load. Thus, the distribution transformer can not safely operate under highly-dynamic and stressful conditions, requiring the support of alternative systems. Among the existing solutions, hybrid transformers, which are composed of a conventional transformer and a power converter, are an interesting alternative to cope with several power quality problems. This article is a review of the available literature about hybrid distribution transformers.

scholarly journals A thin, deformable, high-performance supercapacitor implant that can be biodegraded and bioabsorbed within an animal body

2021 ◽  
Vol 7 (2) ◽  
pp. eabe3097
Author(s):  
Hongwei Sheng ◽  
Jingjing Zhou ◽  
Bo Li ◽  
Yuhang He ◽  
Xuetao Zhang ◽  
...  
Keyword(s):  
High Performance ◽  
Electronic Devices ◽  
Form Factors ◽  
Time Frame ◽  
Water Soluble ◽  
Two Dimensional ◽  
Medical Electronics ◽  
Thin Structure ◽  
Shed Light

It has been an outstanding challenge to achieve implantable energy modules that are mechanically soft (compatible with soft organs and tissues), have compact form factors, and are biodegradable (present for a desired time frame to power biodegradable, implantable medical electronics). Here, we present a fully biodegradable and bioabsorbable high-performance supercapacitor implant, which is lightweight and has a thin structure, mechanical flexibility, tunable degradation duration, and biocompatibility. The supercapacitor with a high areal capacitance (112.5 mF cm−2 at 1 mA cm−2) and energy density (15.64 μWh cm−2) uses two-dimensional, amorphous molybdenum oxide (MoOx) flakes as electrodes, which are grown in situ on water-soluble Mo foil using a green electrochemical strategy. Biodegradation behaviors and biocompatibility of the associated materials and the supercapacitor implant are systematically studied. Demonstrations of a supercapacitor implant that powers several electronic devices and that is completely degraded after implantation and absorbed in rat body shed light on its potential uses.

scholarly journals Ultrathin, Lightweight, and Flexible CNT Buckypaper Enhanced Using MXenes for Electromagnetic Interference Shielding

2021 ◽  
Vol 13 (1) ◽  
Author(s):  
Rongliang Yang ◽  
Xuchun Gui ◽  
Li Yao ◽  
Qingmei Hu ◽  
Leilei Yang ◽  
...  
Keyword(s):  
Electromagnetic Interference ◽  
High Performance ◽  
Electronic Devices ◽  
Deposition Process ◽  
Shielding Effectiveness ◽  
Emi Shielding ◽  
Emi Shielding Effectiveness ◽  
X Band ◽  
Wearable Electronic Devices ◽  
Emi Se

AbstractLightweight, flexibility, and low thickness are urgent requirements for next-generation high-performance electromagnetic interference (EMI) shielding materials for catering to the demand for smart and wearable electronic devices. Although several efforts have focused on constructing porous and flexible conductive films or aerogels, few studies have achieved a balance in terms of density, thickness, flexibility, and EMI shielding effectiveness (SE). Herein, an ultrathin, lightweight, and flexible carbon nanotube (CNT) buckypaper enhanced using MXenes (Ti3C2Tx) for high-performance EMI shielding is synthesized through a facile electrophoretic deposition process. The obtained Ti3C2Tx@CNT hybrid buckypaper exhibits an outstanding EMI SE of 60.5 dB in the X-band at 100 μm. The hybrid buckypaper with an MXene content of 49.4 wt% exhibits an EMI SE of 50.4 dB in the X-band with a thickness of only 15 μm, which is 105% higher than that of pristine CNT buckypaper. Furthermore, an average specific SE value of 5.7 × 104 dB cm2 g−1 is exhibited in the 5-μm hybrid buckypaper. Thus, this assembly process proves promising for the construction of ultrathin, flexible, and high-performance EMI shielding films for application in electronic devices and wireless communications.

scholarly journals Input Parallel Output Series Structure of Planar Medium Frequency Transformers for 200 kW Power Converter: Model and Parameters Evaluation

Energies ◽  
2021 ◽  
Vol 14 (5) ◽  
pp. 1450
Author(s):  
Alessandro La Ganga ◽  
Roberto Re ◽  
Paolo Guglielmi
Keyword(s):  
Electric Vehicles ◽  
High Performance ◽  
Power Converter ◽  
Electrical Model ◽  
Solid State Transformer ◽  
Medium Frequency ◽  
Analytical Treatment ◽  
Transformer Model ◽  
Planar Medium ◽  
Parallel Output

Nowadays, the demand for high power converters for DC applications, such as renewable sources or ultra-fast chargers for electric vehicles, is constantly growing. Galvanic isolation is mandatory in most of these applications. In this context, the Solid State Transformer (SST) converter plays a fundamental role. The adoption of the Medium Frequency Transformers (MFT) guarantees galvanic isolation in addition to high performance in reduced size. In the present paper, a multi MFT structure is proposed as a solution to improve the power density and the modularity of the system. Starting from 20kW planar transformer model, experimentally validated, a multi-transformer structure is analyzed. After an analytical treatment of the Input Parallel Output Series (IPOS) structure, an equivalent electrical model of a 200kW IPOS (made by 10 MFTs) is introduced. The model is validated by experimental measurements and tests.

Sign in / Sign up

Export Citation Format

Share Document