scholarly journals Physicochemical Upgrading of a Biodetergent for Application in the Industrial Energy Sector

Energies ◽  
2022 ◽  
Vol 15 (2) ◽  
pp. 463
Author(s):  
Charles Bronzo B. Farias ◽  
Rita de Cássia F. Soares da Silva ◽  
Fabíola Carolina G. Almeida ◽  
Attilio Converti ◽  
Valdemir A. dos Santos ◽  
...  
Keyword(s):  
Large Scale ◽  
High Efficiency ◽  
Scale Up ◽  
Energy Sector ◽  
Operating Conditions ◽  
Fuel Oil ◽  
Scale Production ◽  
Hydrophilic Lipophilic Balance ◽  
Industrial Energy ◽  
Stirring Time

In the industries across the petroleum chain and those involved in energy generation, the use of petroderivatives as fuel oils is common. To clean parts, equipment and environments contaminated by hydrocarbons, they use expensive, toxic products, bringing risks to the environment as well as to workers’ health. Thus, the aim of this study was to check the stability of a biodetergent prepared using atoxic substances for large-scale production and industrial energy sector application. The relationship between volume (4 to 10 L) and stirring time (5 to 10 min) of the formulation at 3200 rpm and 80 °C was evaluated. The hydrophilic lipophilic balance (HLB), long-term stability (365 days), toxicity and efficiency of low-sulfur, viscous fuel oil removal from metal pieces and floors were investigated. The interaction among operating conditions was shown to influence the features of the product, which achieved approximately 100% stability after a stirring time of 7 min. The emulsion HBL index varied between 4.3 and 11.0. The biodetergent maintained its physicochemical properties during its 365 days of storage and showed high efficiency, removing 100% of the OCB1 impregnated on the metallic surfaces and floors tested. The formulation showed reliability in scale up when submitted to the study of physicochemical factors in the productive process, and safe application, by reducing risks for workers’ health and environment.

Solid Lipid Nanoparticles: A Promising Drug Delivery Technology

2009 ◽  
Vol 2 (2) ◽  
pp. 509-516
Author(s):  
S. Pragati ◽  
S. Kuldeep ◽  
S. Ashok ◽  
M. Satheesh
Keyword(s):  
Drug Delivery ◽  
Solid Lipid Nanoparticles ◽  
Large Scale ◽  
Colloidal Particles ◽  
Scale Up ◽  
Lipid Nanoparticles ◽  
Scale Production ◽  
Research Activity ◽  
New Approach ◽  
Solid Lipid

One of the situations in the treatment of disease is the delivery of efficacious medication of appropriate concentration to the site of action in a controlled and continual manner. Nanoparticle represents an important particulate carrier system, developed accordingly. Nanoparticles are solid colloidal particles ranging in size from 1 to 1000 nm and composed of macromolecular material. Nanoparticles could be polymeric or lipidic (SLNs). Industry estimates suggest that approximately 40% of lipophilic drug candidates fail due to solubility and formulation stability issues, prompting significant research activity in advanced lipophile delivery technologies. Solid lipid nanoparticle technology represents a promising new approach to lipophile drug delivery. Solid lipid nanoparticles (SLNs) are important advancement in this area. The bioacceptable and biodegradable nature of SLNs makes them less toxic as compared to polymeric nanoparticles. Supplemented with small size which prolongs the circulation time in blood, feasible scale up for large scale production and absence of burst effect makes them interesting candidates for study. In this present review this new approach is discussed in terms of their preparation, advantages, characterization and special features.

Recombinant Protein Production in Microalgae: Emerging Trends

2020 ◽  
Vol 27 (2) ◽  
pp. 105-110 ◽  
Author(s):  
Niaz Ahmad ◽  
Muhammad Aamer Mehmood ◽  
Sana Malik
Keyword(s):  
Chloroplast Genome ◽  
Recombinant Proteins ◽  
Large Scale ◽  
Higher Plants ◽  
Scale Up ◽  
Chloroplast Transformation ◽  
Point Of View ◽  
Nuclear Transformation ◽  
Scale Production ◽  
Algal Chloroplast

: In recent years, microalgae have emerged as an alternative platform for large-scale production of recombinant proteins for different commercial applications. As a production platform, it has several advantages, including rapid growth, easily scale up and ability to grow with or without the external carbon source. Genetic transformation of several species has been established. Of these, Chlamydomonas reinhardtii has become significantly attractive for its potential to express foreign proteins inexpensively. All its three genomes – nuclear, mitochondrial and chloroplastic – have been sequenced. As a result, a wealth of information about its genetic machinery, protein expression mechanism (transcription, translation and post-translational modifications) is available. Over the years, various molecular tools have been developed for the manipulation of all these genomes. Various studies show that the transformation of the chloroplast genome has several advantages over nuclear transformation from the biopharming point of view. According to a recent survey, over 100 recombinant proteins have been expressed in algal chloroplasts. However, the expression levels achieved in the algal chloroplast genome are generally lower compared to the chloroplasts of higher plants. Work is therefore needed to make the algal chloroplast transformation commercially competitive. In this review, we discuss some examples from the algal research, which could play their role in making algal chloroplast commercially successful.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

Utilization of Tea Tree Branches as a Source of Thermal Energy

2020 ◽  
Vol 849 ◽  
pp. 8-13
Author(s):  
Rudi Firyanto ◽  
Heru Susanto ◽  
Retno S.L. Ambarwati ◽  
Suherman ◽  
Widayat
Keyword(s):  
Thermal Energy ◽  
Scale Up ◽  
Operating Conditions ◽  
Fuel Oil ◽  
Optimum Operating ◽  
Large Contribution ◽  
Drying Process ◽  
Processing Industry ◽  
Tea Plantations ◽  
Gasification Technology

Energy has an important role in the survival of the tea processing industry. The costs for energy generation and application have a large contribution to the total cost of the tea processing. The use of fuel oil and electricity, especially in the drying process is the biggest energy user stage. In line with the development of Indonesia's tea processing industry, it is felt necessary to immediately utilize the source of biomass in tea plantations through the application of gasification technology. The development of tea processing in the future should pay more attention to aspects of energy and the environment as the main discussion. This study aims to examine the development of gasification technology in converting biomass as thermal energy to meet gas quality in the tea drying process. The hypothesis is that through the gasification biomass technology of tea plantations, will produce gas as thermal energy that meets the quality of the tea drying process. The target to be achieved is in the form of laboratory technical data for the design, operation of the process, scale-up and evaluation of the performance of the gasifier which includes flame propagation, simulation of combustion and optimum operating conditions with temperature process variables, air flow rate and gas products, tea biomass capacity, and the length of the gasification process.

scholarly journals Scale-up of the production of highly reactive biogenic magnetite nanoparticles using Geobacter sulfurreducens

2015 ◽  
Vol 12 (107) ◽  
pp. 20150240 ◽  
Author(s):  
J. M. Byrne ◽  
H. Muhamadali ◽  
V. S. Coker ◽  
J. Cooper ◽  
J. R. Lloyd
Keyword(s):  
Magnetic Properties ◽  
Large Scale ◽  
Scale Up ◽  
Surface Reactivity ◽  
Geobacter Sulfurreducens ◽  
Scale Production ◽  
Buffer Solution ◽  
Pilot Plant Scale ◽  
Functional Biomaterials ◽  
Microbial Systems

Although there are numerous examples of large-scale commercial microbial synthesis routes for organic bioproducts, few studies have addressed the obvious potential for microbial systems to produce inorganic functional biomaterials at scale. Here we address this by focusing on the production of nanoscale biomagnetite particles by the Fe(III)-reducing bacterium Geobacter sulfurreducens , which was scaled up successfully from laboratory- to pilot plant-scale production, while maintaining the surface reactivity and magnetic properties which make this material well suited to commercial exploitation. At the largest scale tested, the bacterium was grown in a 50 l bioreactor, harvested and then inoculated into a buffer solution containing Fe(III)-oxyhydroxide and an electron donor and mediator, which promoted the formation of magnetite in under 24 h. This procedure was capable of producing up to 120 g of biomagnetite. The particle size distribution was maintained between 10 and 15 nm during scale-up of this second step from 10 ml to 10 l, with conserved magnetic properties and surface reactivity; the latter demonstrated by the reduction of Cr(VI). The process presented provides an environmentally benign route to magnetite production and serves as an alternative to harsher synthetic techniques, with the clear potential to be used to produce kilogram to tonne quantities.

scholarly journals The Opportunities and Challenges regarding Induced Platelets from Human Pluripotent Stem Cells

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Meng-Xue Xu ◽  
Li-Ping Liu ◽  
Yu-Mei Li ◽  
Yun-Wen Zheng
Keyword(s):  
Stem Cells ◽  
Clinical Application ◽  
Pluripotent Stem Cells ◽  
High Efficiency ◽  
Storage Temperature ◽  
Scale Up ◽  
Human Pluripotent Stem Cells ◽  
Scale Production ◽  
Platelet Production ◽  
Platelet Transfusions

As a standard clinical treatment, platelet transfusion has been employed to prevent hemorrhage in patients with thrombocytopenia or platelet dysfunctions. Platelets also show therapeutic potential for aiding liver regeneration and bone healing and regeneration and for treating dermatological conditions. However, the supply of platelets rarely meets the rising clinical demand. Other issues, including short shelf life, strict storage temperature, and allogeneic immunity caused by frequent platelet transfusions, have become serious challenges that require the development of high-yielding alternative sources of platelets. Human pluripotent stem cells (hPSCs) are an unlimited substitution source for regenerative medicine, and patient-derived iPSCs can provide novel research models to explore the pathogenesis of some diseases. Many studies have focused on establishing and modifying protocols for generating functional induced platelets (iPlatelets) from hPSCs. To reach high efficiency production and eliminate the exogenous antigens, media supplements and matrix have been optimized. In addition, the introduction of some critical transgenes, such as c-MYC, BMI1, and BCL-XL, can also significantly increase hPSC-derived platelet production; however, this may pose some safety concerns. Furthermore, many novel culture systems have been developed to scale up the production of iPlatelets, including 2D flow systems, 3D rotary systems, and vertical reciprocal motion liquid culture bioreactors. The development of new gene-editing techniques, such as CRISPR/Cas9, can be used to solve allogeneic immunity of platelet transfusions by knocking out the expression of B2M. Additionally, the functions of iPlatelets were also evaluated from multiple aspects, including but not limited to morphology, structure, cytoskeletal organization, granule content, DNA content, and gene expression. Although the production and functions of iPlatelets are close to meeting clinical application requirements in both quantity and quality, there is still a long way to go for their large-scale production and clinical application. Here, we summarize the diverse methods of platelet production and update the progresses of iPlatelets. Furthermore, we highlight recent advances in our understanding of key transcription factors or molecules that determine the platelet differentiation direction.

scholarly journals Evaluation of Large-Scale Production of Chitosan Microbeads Modified with Nanoparticles Based on Exergy Analysis

Energies ◽  
2019 ◽  
Vol 12 (7) ◽  
pp. 1200 ◽  
Author(s):  
Samir Meramo-Hurtado ◽  
Adriana Herrera-Barros ◽  
Ángel González-Delgado
Keyword(s):  
Large Scale ◽  
Exergy Analysis ◽  
Chemical Species ◽  
Industrial Process ◽  
Simulation Software ◽  
Operating Conditions ◽  
Scale Production ◽  
Water Recovery ◽  
Novel Technologies ◽  
Large Scale Production

Novel technologies for bio-adsorbent production are being evaluated on the lab-scale in order to find the most adequate processing alternative under technical parameters. However, the poor energy efficiency of promising technologies can be a drawback for large-scale production of these bio-adsorbents. In this work, exergy analysis was used as a computer-aided tool to evaluate from the energy point of view, the behavior of three bio-adsorbent production topologies at large scale for obtaining chitosan microbeads modified with magnetic and photocatalytic nanoparticles. The routes were modeled using an industrial process simulation software, based on experimental results and information reported in literature. Mass, energy and exergy balances were performed for each alternative, physical and chemical exergies of streams and chemical species were calculated according to the thermodynamic properties of biomass components and operating conditions of stages. Exergy efficiencies, total process irreversibilities, energy consumption, and exergy destruction were calculated for all routes. Route 2 presents the highest process irreversibilities and route 3 has the highest exergy of utilities. Exergy efficiencies were similar for all simulated cases, which did not allow to choose the best alternative under energy viewpoint. Exergy sinks for each topology were detected. As values of exergy efficiency were under 3%, it was shown that there are process improvement opportunities in product drying stages and washing water recovery for the three routes.

scholarly journals Development of a Low-Cost and High-Efficiency Culture Medium for Bacteriocin Lac-B23 Production by Lactobacillus plantarum J23

Biology ◽  
2020 ◽  
Vol 9 (7) ◽  
pp. 171
Author(s):  
Jianming Zhang ◽  
Yushan Bu ◽  
Chengcheng Zhang ◽  
Huaxi Yi ◽  
Daqun Liu ◽  
...  
Keyword(s):  
Lactobacillus Plantarum ◽  
Large Scale ◽  
Culture Medium ◽  
High Efficiency ◽  
Low Cost ◽  
Tween 80 ◽  
Manganese Sulfate ◽  
Scale Production ◽  
The Cost ◽  
Mrs Broth

At present, De Man, Rogosa and Sharpe (MRS) broth is the medium of choice for promoting bacteriocin production. However, this medium is expensive and not applicable for large-scale production. Therefore, a low-cost and high-efficiency culture medium for bacteriocin Lac-B23 production by Lactobacillus plantarum J23 was developed. First, the effects of the composition of MRS broth on bacteriocin Lac-B23 production and bacterial growth were researched by a one variable at a time approach. Then, a Plackett-Burman design was used to screen significant components for production. Finally, the steepest ascent and central composite designs were used to obtain an optimum medium. The final composition of the modified MRS was much simpler than MRS broth, and the modified MRS contained only glucose, yeast extract, dipotassium phosphate, manganese sulfate monohydrate, Tween 80 and sodium acetate anhydrous. The highest bacteriocin Lac-B23 production reached 2560 activity units (AU)/mL in the modified MRS, which is nine times higher than that in MRS broth (280 AU/mL). Meanwhile, the cost per liter of the modified MRS (8.56 Ren Min Bi (RMB)/L) is 34.70% the cost of MRS broth (13.11 RMB/L), and the cost per arbitrary units of bacteriocin Lac-B23 in the modified MRS is approximately fourteen times more convenient (3.34 RMB/106 AU) than in the MRS broth (46.82 RMB/106 AU).

Characterization of Thin Film CdTe photovoltaic materials deposited by high plasma density magnetron sputtering

2011 ◽  
Vol 1323 ◽  
Author(s):  
A. Abbas ◽  
J.W. Bowers ◽  
B. Maniscalco ◽  
S. Moh ◽  
G.D West ◽  
...  
Keyword(s):  
Magnetron Sputtering ◽  
Plasma Density ◽  
Large Scale ◽  
Scale Up ◽  
High Plasma ◽  
Window Layer ◽  
Closed Field ◽  
Scale Production ◽  
Batch System ◽  
High Plasma Density

ABSTRACTA new magnetron sputtering strategy is introduced that utilizes high plasma density (~5mA.cm-2) to avoid or reduce high temperature processing. The technique uses magnetrons of opposing magnetic polarity to create a “closed field” in which the plasma density is enhanced without the need for high applied Voltages. A batch system has been used which employs a rotating vertical drum as the substrate carrier and a symmetrical array of linear magnetrons. The magnetrons are fitted with target materials for each of the thin films required in the photovoltaic (PV) stack including the CdTe absorber layer, CdS window layer, metal contact using the conventional superstrate configuration. The “closed field” sputtering technology allows scale up not only for larger batch system designs but it is also configurable for “in-line” or “roll to roll” formats for large scale production. The morphology of each of the layers is characterized using a variety of structural and optical techniques including Field Emission Gun SEM and X-ray diffraction (XRD).

Sign in / Sign up

Export Citation Format

Share Document