scholarly journals Naturally Prefabricated Marine Biomaterials: Isolation and Applications of Flat Chitinous 3D Scaffolds from Ianthella labyrinthus (Demospongiae: Verongiida)

2019 ◽  
Vol 20 (20) ◽  
pp. 5105 ◽  
Author(s):  
Mario Schubert ◽  
Björn Binnewerg ◽  
Alona Voronkina ◽  
Lyubov Muzychka ◽  
Marcin Wysokowski ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Marine Sponges ◽  
Biologically Active ◽  
3D Scaffolds ◽  
Chemical Treatments ◽  
The Family ◽  
Unique Source ◽  
Induced Pluripotent ◽  
First Time

Marine sponges remain representative of a unique source of renewable biological materials. The demosponges of the family Ianthellidae possess chitin-based skeletons with high biomimetic potential. These three-dimensional (3D) constructs can potentially be used in tissue engineering and regenerative medicine. In this study, we focus our attention, for the first time, on the marine sponge Ianthella labyrinthus Bergquist & Kelly-Borges, 1995 (Demospongiae: Verongida: Ianthellidae) as a novel potential source of naturally prestructured bandage-like 3D scaffolds which can be isolated simultaneously with biologically active bromotyrosines. Specifically, translucent and elastic flat chitinous scaffolds have been obtained after bromotyrosine extraction and chemical treatments of the sponge skeleton with alternate alkaline and acidic solutions. For the first time, cardiomyocytes differentiated from human induced pluripotent stem cells (iPSC-CMs) have been used to test the suitability of I. labyrinthus chitinous skeleton as ready-to-use scaffold for their cell culture. Results reveal a comparable attachment and growth on isolated chitin-skeleton, compared to scaffolds coated with extracellular matrix mimetic Geltrex®. Thus, the natural, unmodified I. labyrinthus cleaned sponge skeleton can be used to culture iPSC-CMs and 3D tissue engineering. In addition, I. labyrinthus chitin-based scaffolds demonstrate strong and efficient capability to absorb blood deep into the microtubes due to their excellent capillary effect. These findings are suggestive of the future development of new sponge chitin-based absorbable hemostats as alternatives to already well recognized cellulose-based fabrics.

scholarly journals Naturally Drug-Loaded Chitin: Isolation and Applications

Marine Drugs ◽  
2019 ◽  
Vol 17 (10) ◽  
pp. 574 ◽  
Author(s):  
Valentine Kovalchuk ◽  
Alona Voronkina ◽  
Björn Binnewerg ◽  
Mario Schubert ◽  
Liubov Muzychka ◽  
...  
Keyword(s):  
Biomedical Applications ◽  
Three Dimensional ◽  
Subsequent Treatment ◽  
Marine Sponges ◽  
Biologically Active ◽  
Naturally Occurring ◽  
The Family ◽  
3D Architecture ◽  
First Time ◽  
Diffusion Assay

Naturally occurring three-dimensional (3D) biopolymer-based matrices that can be used in different biomedical applications are sustainable alternatives to various artificial 3D materials. For this purpose, chitin-based structures from marine sponges are very promising substitutes. Marine sponges from the order Verongiida (class Demospongiae) are typical examples of demosponges with well-developed chitinous skeletons. In particular, species belonging to the family Ianthellidae possess chitinous, flat, fan-like fibrous skeletons with a unique, microporous 3D architecture that makes them particularly interesting for applications. In this work, we focus our attention on the demosponge Ianthella flabelliformis (Linnaeus, 1759) for simultaneous extraction of both naturally occurring (“ready-to-use”) chitin scaffolds, and biologically active bromotyrosines which are recognized as potential antibiotic, antitumor, and marine antifouling substances. We show that selected bromotyrosines are located within pigmental cells which, however, are localized within chitinous skeletal fibers of I. flabelliformis. A two-step reaction provides two products: treatment with methanol extracts the bromotyrosine compounds bastadin 25 and araplysillin-I N20 sulfamate, and a subsequent treatment with acetic acid and sodium hydroxide exposes the 3D chitinous scaffold. This scaffold is a mesh-like structure, which retains its capillary network, and its use as a potential drug delivery biomaterial was examined for the first time. The results demonstrate that sponge-derived chitin scaffolds, impregnated with decamethoxine, effectively inhibit growth of the human pathogen Staphylococcus aureus in an agar diffusion assay.

scholarly journals Fabrication of 3D Printing Scaffold with Porcine Skin Decellularized Bio-Ink for Soft Tissue Engineering

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3522
Author(s):  
Su Jeong Lee ◽  
Jun Hee Lee ◽  
Jisun Park ◽  
Wan Doo Kim ◽  
Su A Park
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
3D Printing ◽  
Three Dimensional ◽  
3D Bioprinting ◽  
Research Groups ◽  
Porcine Skin ◽  
Alginate Hydrogel ◽  
Chemical Treatments ◽  
Soft Tissue Engineering

Recently, many research groups have investigated three-dimensional (3D) bioprinting techniques for tissue engineering and regenerative medicine. The bio-ink used in 3D bioprinting is typically a combination of synthetic and natural materials. In this study, we prepared bio-ink containing porcine skin powder (PSP) to determine rheological properties, biocompatibility, and extracellular matrix (ECM) formation in cells in PSP-ink after 3D printing. PSP was extracted without cells by mechanical, enzymatic, and chemical treatments of porcine dermis tissue. Our developed PSP-containing bio-ink showed enhanced printability and biocompatibility. To identify whether the bio-ink was printable, the viscosity of bio-ink and alginate hydrogel was analyzed with different concentration of PSP. As the PSP concentration increased, viscosity also increased. To assess the biocompatibility of the PSP-containing bio-ink, cells mixed with bio-ink printed structures were measured using a live/dead assay and WST-1 assay. Nearly no dead cells were observed in the structure containing 10 mg/mL PSP-ink, indicating that the amounts of PSP-ink used were nontoxic. In conclusion, the proposed skin dermis decellularized bio-ink is a candidate for 3D bioprinting.

scholarly journals Freeze-dried multiscale porous nanofibrous three dimensional scaffolds for bone regenerations

Bioimpacts ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 73-85 ◽  
Author(s):  
Maryam Sadat Khoramgah ◽  
Javad Ranjbari ◽  
Hojjat-Allah Abbaszadeh ◽  
Fatemeh Sadat Tabatabaei Mirakabad ◽  
Shadie Hatami ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Freeze Drying ◽  
Three Dimensional ◽  
Cross Linking ◽  
Drying Methods ◽  
3D Scaffolds ◽  
Hierarchical Porous ◽  
Physicochemical Features

Introduction: Simulating hydrophobic-hydrophilic composite face with hierarchical porous and fibrous architectures of bone extracellular matrix (ECM) is a key aspect in bone tissue engineering. This study focused on the fabrication of new three-dimensional (3D) scaffolds containing polytetrafluoroethylene (PTFE), and polyvinyl alcohol (PVA), with and without graphene oxide (GO) nanoparticles using the chemical cross-linking and freeze-drying methods for bone tissue application. The effects of GO on physicochemical features and osteoinduction properties of the scaffolds were evaluated through an in vitro study. Methods: After synthesizing the GO nanoparticles, two types of 3D scaffolds, PTFE/PVA (PP) and PTFE/PVA/GO (PPG), were developed by cross-linking and freeze-drying methods. The physicochemical features of scaffolds were assessed and the interaction of the 3D scaffold types with human adipose mesenchymal stem cells (hADSCs) including attachment, proliferation, and differentiation to osteogenic like cells were investigated. Results: GO nanoparticles were successfully synthesized with no agglomeration. The blending of PTFE as a hydrophobic polymer with PVA polymer and GO nanoparticles (hydrophilic compartments) were successful. Two types of 3D scaffolds had nano topographical structures, good porosities, hydrophilic surfaces, thermal stabilities, good stiffness, as well as supporting the cell attachments, proliferation, and osteogenic differentiation. Notably, GO incorporating scaffolds provided a better milieu for cell behaviors. Conclusion: Novel multiscale porous nanofibrous 3D scaffolds made from PTFE/ PVA polymers with and without GO nanoparticles could be an ideal candidate for bone tissue engineering as a 3D template.

scholarly journals Marine Biomaterial-Based Bioinks for Generating 3D Printed Tissue Constructs

Marine Drugs ◽  
2018 ◽  
Vol 16 (12) ◽  
pp. 484 ◽  
Author(s):  
Xiaowei Zhang ◽  
Gyeong Kim ◽  
Min Kang ◽  
Jung Lee ◽  
Jeong Seo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Mechanical Strength ◽  
Physical Properties ◽  
Degradation Rate ◽  
Polymer Network ◽  
Three Dimensional ◽  
Pharmaceutical Products ◽  
Biologically Active ◽  
Interpenetrating Polymer Network ◽  
Biomedical Fields

Biologically active materials from marine sources have been receiving increasing attention as they are free from the transmissible diseases and religious restrictions associated with the use of mammalian resources. Among various other biomaterials from marine sources, alginate and fish gelatin (f-gelatin), with their inherent bioactivity and physicochemical tunability, have been studied extensively and applied in various biomedical fields such as regenerative medicine, tissue engineering, and pharmaceutical products. In this study, by using alginate and f-gelatin’s chemical derivatives, we developed a marine-based interpenetrating polymer network (IPN) hydrogel consisting of alginate and f-gelatin methacryloyl (f-GelMA) networks via physical and chemical crosslinking methods, respectively. We then evaluated their physical properties (mechanical strength, swelling degree, and degradation rate) and cell behavior in hydrogels. Our results showed that the alginate/f-GelMA hydrogel displayed unique physical properties compared to when alginate and f-GelMA were used separately. These properties included high mechanical strength, low swelling and degradation rate, and an increase in cell adhesive ability. Moreover, for the first time, we introduced and optimized the application of alginate/f-GelMA hydrogel in a three-dimensional (3D) bioprinting system with high cell viability, which breaks the restriction of their utilization in tissue engineering applications and suggests that alginate/f-GelMA can be utilized as a novel bioink to broaden the uses of marine products in biomedical fields.

scholarly journals Fabrication of Piezoelectric Electrospun Termite Nest-like 3D Scaffolds for Tissue Engineering

Materials ◽  
2021 ◽  
Vol 14 (24) ◽  
pp. 7684
Author(s):  
Thanapon Muenwacha ◽  
Oratai Weeranantanapan ◽  
Nuannoi Chudapongse ◽  
Francisco Javier Diaz Sanchez ◽  
Santi Maensiri ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Vinylidene Fluoride ◽  
Three Dimensional ◽  
Cell Interaction ◽  
Biological Properties ◽  
Engineering Applications ◽  
3D Scaffolds ◽  
3D Shapes ◽  
Termite Nest

A high piezoelectric coefficient polymer and biomaterial for bone tissue engineering— poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP)—has been successfully fabricated into 3D scaffolds using the wet electrospinning method. Three-dimensional (3D) scaffolds have significant advantages for tissue engineering applications. Electrospinning is an advanced method and can fabricate 3D scaffolds. However, it has some limitations and is difficult to fabricate nanofibers into 3D shapes because of the low controllability of porosity and internal pore shape. The PVDF-HFP powders were dissolved in a mixture of acetone and dimethylformamide with a ratio of 1:1 at various concentrations of 10, 13, 15, 17, and 20 wt%. However, only the solutions at 15 and 17 wt% with optimized electrospinning parameters can be fabricated into biomimetic 3D shapes. The produced PVDF-HFP 3D scaffolds are in the cm size range and mimic the structure of the natural nests of termites of the genus Apicotermes. In addition, the 3D nanofiber-based structure can also generate more electrical signals than the conventional 2D ones, as the third dimension provides more compression. The cell interaction with the 3D nanofibers scaffold was investigated. The in vitro results demonstrated that the NIH 3T3 cells could attach and migrate in the 3D structures. While conventional electrospinning yields 2D (flat) structures, our bio-inspired electrospun termite nest-like 3D scaffolds are better suited for tissue engineering applications since they can potentially mimic native tissues as they have biomimetic structure, piezoelectric, and biological properties.

scholarly journals Microvascular fragment spheroids: Three-dimensional vascularization units for tissue engineering and regeneration

2021 ◽  
Vol 12 ◽  
pp. 204173142110355
Author(s):  
Lisa Nalbach ◽  
Danièle Müller ◽  
Selina Wrublewsky ◽  
Wolfgang Metzger ◽  
Michael D Menger ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Cell Function ◽  
Smooth Muscle Actin ◽  
Three Dimensional ◽  
Stromal Vascular Fraction ◽  
Muscle Actin ◽  
Tissue Constructs ◽  
First Time ◽  
Tissue Defects

Adipose tissue-derived microvascular fragments (MVF) serve as vascularization units in tissue engineering and regenerative medicine. Because a three-dimensional cellular arrangement has been shown to improve cell function, we herein generated for the first time MVF spheroids to investigate whether this further increases their vascularization potential. These spheroids exhibited a morphology, size, and viability comparable to that of previously introduced stromal vascular fraction (SVF) spheroids. However, MVF spheroids contained a significantly higher number of CD31-positive endothelial cells and α-smooth muscle actin (SMA)-positive perivascular cells, resulting in an enhanced angiogenic sprouting activity. Accordingly, they also exhibited an improved in vivo vascularization and engraftment after transplantation into mouse dorsal skinfold chambers. These findings indicate that MVF spheroids are superior to SVF spheroids and, thus, may be highly suitable to improve the vascularization of tissue defects and implanted tissue constructs.

scholarly journals Calcium Orthophosphate (CaPO4) Scaffolds for Bone Tissue Engineering Applications

2018 ◽  
Vol 1 (3) ◽  
pp. 25-93 ◽  
Author(s):  
Sergey V. Dorozhkin
Keyword(s):  
Drug Delivery ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Three Dimensional ◽  
Bone Grafts ◽  
Biologically Active ◽  
Growth Factor Delivery ◽  
Engineering Applications ◽  
Scaffold Materials

The chemical and structural similarities of calcium orthophosphates (abbreviated as CaPO4)to the mineral composition of natural bones and teeth have made them a good candidate for bone tissue engineering applications. Nowadays, a variety of natural or synthetic CaPO4-based biomaterials is produced and has been extensively used for dental and orthopedic applications. Despite their inherent brittleness, CaPO4 materials possess several appealing characteristics as scaffold materials. Namely, their biocompatibility and variable stoichiometry, thus surface charge density, functionality and dissolution properties, make them suitable for both drug and growth factor delivery. Therefore, CaPO4, especially hydroxyapatite (HA) and tricalcium phosphates (TCPs), have attracted a significant interest in simultaneous use as bone grafts and drug delivery vehicles. Namely, CaPO4-based three-dimensional (3D) scaffolds and/or carriers have been designed to induce bone formation and vascularization. These scaffolds are usually porous and harbor various types of drugs, biologically active molecules and/or cells. Over the past few decades, their application as bone grafts in combination with stem cells has gained much importance. This review discusses the source, manufacturing methods and advantages of using CaPO4 scaffolds for bone tissue engineering applications. Perspective future applications comprise drug delivery and tissue engineering purposes.

scholarly journals Express Method for Isolation of Ready-to-Use 3D Chitin Scaffolds from Aplysina archeri (Aplysineidae: Verongiida) Demosponge

Marine Drugs ◽  
2019 ◽  
Vol 17 (2) ◽  
pp. 131 ◽  
Author(s):  
Christine Klinger ◽  
Sonia Żółtowska-Aksamitowska ◽  
Marcin Wysokowski ◽  
Mikhail V. Tsurkan ◽  
Roberta Galli ◽  
...  
Keyword(s):  
Marine Sponges ◽  
Biologically Active ◽  
Blue Dye ◽  
Methylene Blue Dye ◽  
Biotechnological Applications ◽  
Express Method ◽  
First Time ◽  
Interconnected Structure ◽  
Biomedical Fields ◽  
Human And Animal Diseases

Sponges are a valuable source of natural compounds and biomaterials for many biotechnological applications. Marine sponges belonging to the order Verongiida are known to contain both chitin and biologically active bromotyrosines. Aplysina archeri (Aplysineidae: Verongiida) is well known to contain bromotyrosines with relevant bioactivity against human and animal diseases. The aim of this study was to develop an express method for the production of naturally prefabricated 3D chitin and bromotyrosine-containing extracts simultaneously. This new method is based on microwave irradiation (MWI) together with stepwise treatment using 1% sodium hydroxide, 20% acetic acid, and 30% hydrogen peroxide. This approach, which takes up to 1 h, made it possible to isolate chitin from the tube-like skeleton of A. archeri and to demonstrate the presence of this biopolymer in this sponge for the first time. Additionally, this procedure does not deacetylate chitin to chitosan and enables the recovery of ready-to-use 3D chitin scaffolds without destruction of the unique tube-like fibrous interconnected structure of the isolated biomaterial. Furthermore, these mechanically stressed fibers still have the capacity for saturation with water, methylene blue dye, crude oil, and blood, which is necessary for the application of such renewable 3D chitinous centimeter-sized scaffolds in diverse technological and biomedical fields.

scholarly journals Magnetic levitational bioassembly of 3D tissue construct in space

2020 ◽  
Vol 6 (29) ◽  
pp. eaba4174 ◽  
Author(s):  
Vladislav A. Parfenov ◽  
Yusef D. Khesuani ◽  
Stanislav V. Petrov ◽  
Pavel A. Karalkin ◽  
Elizaveta V. Koudan ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Label Free ◽  
Tissue Constructs ◽  
Advanced Stages ◽  
Feasible Alternative ◽  
New Perspective ◽  
First Time ◽  
Conceptual Advance ◽  
Good Agreement

Magnetic levitational bioassembly of three-dimensional (3D) tissue constructs represents a rapidly emerging scaffold- and label-free approach and alternative conceptual advance in tissue engineering. The magnetic bioassembler has been designed, developed, and certified for life space research. To the best of our knowledge, 3D tissue constructs have been biofabricated for the first time in space under microgravity from tissue spheroids consisting of human chondrocytes. Bioassembly and sequential tissue spheroid fusion presented a good agreement with developed predictive mathematical models and computer simulations. Tissue constructs demonstrated good viability and advanced stages of tissue spheroid fusion process. Thus, our data strongly suggest that scaffold-free formative biofabrication using magnetic fields is a feasible alternative to traditional scaffold-based approaches, hinting a new perspective avenue of research that could significantly advance tissue engineering. Magnetic levitational bioassembly in space can also advance space life science and space regenerative medicine.

Novel Absorbable Polyurethane Biomaterials and Scaffolds for Tissue Engineering

2014 ◽  
Vol 1621 ◽  
pp. 93-99 ◽  
Author(s):  
Syam P. Nukavarapu ◽  
Rao S. Bezwada ◽  
Deborah L. Dorcemus ◽  
Neeti Srivasthava ◽  
Robert J. Armentano
Keyword(s):  
Tissue Engineering ◽  
Bone Marrow ◽  
Porous Structure ◽  
Structure Formation ◽  
Stromal Cells ◽  
Three Dimensional ◽  
Biodegradable Polyurethane ◽  
First Time ◽  
Sintering Method ◽  
Microstructural Studies

ABSTRACTThis study reports a novel class of biodegradable polyurethane biomaterials and three-dimensional scaffolds for tissue engineering. Solvent casted polyurethane films were studied for biocompatibility by seeding with human bone marrow derived stromal cells. In order to develop a three-dimensional and porous structure, a dynamic solvent sintering method was applied to the polyurethanes for the first time. Microstructural studies on the sintered scaffolds reveal porous structure formation with bonding between the adjacent microspheres. In conclusion, this study establishes new polyurethane biomaterials that are fully absorbable for tissue engineering applications.

Sign in / Sign up

Export Citation Format

Share Document