scholarly journals In Vitro Comparative Study of Solid Lipid and PLGA Nanoparticles Designed to Facilitate Nose-to-Brain Delivery of Insulin

2021 ◽  
Vol 22 (24) ◽  
pp. 13258
Author(s):  
Hussein Akel ◽  
Ildikó Csóka ◽  
Rita Ambrus ◽  
Alexandra Bocsik ◽  
Ilona Gróf ◽  
...  
Keyword(s):  
Drug Release ◽  
Plga Nanoparticles ◽  
Brain Targeting ◽  
Sustained Drug Release ◽  
Insulin Metabolism ◽  
Chitosan Coating ◽  
Solid Lipid ◽  
Native Insulin ◽  
The Brain

The brain insulin metabolism alteration has been addressed as a pathophysiological factor underlying Alzheimer’s disease (AD). Insulin can be beneficial in AD, but its macro-polypeptide nature negatively influences the chances of reaching the brain. The intranasal (IN) administration of therapeutics in AD suggests improved brain-targeting. Solid lipid nanoparticles (SLNs) and poly(lactic-co-glycolic acid) nanoparticles (PLGA NPs) are promising carriers to deliver the IN-administered insulin to the brain due to the enhancement of the drug permeability, which can even be improved by chitosan-coating. In the present study, uncoated and chitosan-coated insulin-loaded SLNs and PLGA NPs were formulated and characterized. The obtained NPs showed desirable physicochemical properties supporting IN applicability. The in vitro investigations revealed increased mucoadhesion, nasal diffusion, and drug release rate of both insulin-loaded nanocarriers over native insulin with the superiority of chitosan-coated SLNs. Cell-line studies on human nasal epithelial and brain endothelial cells proved the safety IN applicability of nanoparticles. Insulin-loaded nanoparticles showed improved insulin permeability through the nasal mucosa, which was promoted by chitosan-coating. However, native insulin exceeded the blood-brain barrier (BBB) permeation compared with nanoparticulate formulations. Encapsulating insulin into chitosan-coated NPs can be beneficial for ensuring structural stability, enhancing nasal absorption, followed by sustained drug release.

scholarly journals ZOLMITRIPTAN BRAIN TARGETING VIA INTRANASAL ROUTE USING SOLID LIPID NANOPARTICLES FOR MIGRAINE THERAPY: FORMULATION, CHARACTERIZATION, IN-VITRO AND IN-VIVO ASSESSMENT

2020 ◽  
pp. 86-93 ◽  
Author(s):  
DALIA A. ELATY MOSTAFA ◽  
MAHA K. A. KHALIFA ◽  
SAMEH. S. GAD
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Histopathological Study ◽  
Solid Lipid ◽  
The Brain

Objective: Zolmitriptan, a class of antidepressant drugs with poor bioavailability due to its first-pass metabolism. The aim of this study was to improve systemic bioavailability and explore the brain targeting impact of nasal Zolmitriptan (Zol) solid lipid nanoparticles (SLNs) gel for migraine treatment.  Methods: Stearic acid and cholesterol used as solid lipid and lecithin as a surfactant, emulsion solvent evaporation technique was used to produce Zolmitriptan SLNs. (Zol) SLNs were characterized for particle size, percent entrapment efficiency and in vitro drug release. Formula S6 showed greater percent entrapment efficiency (PEE), adequate particle size and sustained drug release behavior. Formula S6 was integrated into HPMC gel (3%) to prepare nasal gel. Zol SLN nasal gel was subjected to histopathological study to ensure brain targeting.  Results: It was observed that all prepared Zol SLNs were in the nano-sized range with a polydispersity index of<0.5. In the cholesterol/lecithin combination, higher PEE%, better stability, and less agglomeration inclination were discovered. Results of the release profiles showed that developed Zol-SLNs were able to release Zolmitriptan in a sustained manner. Histopathological study of the brain tissues showed that Zolmitriptan SLN nasal gel can reach brain cells and localized for 24 h although the hydrophobicity of the target drug. Conclusion: Intranasal administration of Solid lipid nanostructure of Zolmitriptan through the olfactory pathway in which it travels from the nasal cavity to brain tissue achieved drug targeting potential of about 90% compared with conventional Zolmitriptan tablets. The small particle size helped them to squeeze themselves through the small opening in the olfactory neurons to the brain via different endo-cystic pathways of neuronal cells in nasal tissue membranes.

Development of Solid Lipid Nanoparticles of Lamivudine for Brain Targeting

2009 ◽  
Vol 1 (1) ◽  
Author(s):  
Pravin Patil ◽  
Anil Sharma ◽  
Subhash Dadarwal ◽  
Vijay Sharma
Keyword(s):  
Drug Delivery ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Rotation Speed ◽  
Lipid Nanoparticles ◽  
Brain Targeting ◽  
Brain Penetration ◽  
Solid Lipid ◽  
Diffusion Technique

The objective of present investigation was to enhance brain penetration of Lamivudine, one of the most widely used drugs for the treatment of AIDS. This was achieved through incorporating the drug into solid lipid nanoparticles (SLN) prepared by using emulsion solvent diffusion technique. The formulations were characterized for surface morphology, size and size distribution, percent drug entrapment and drug release. The optimum rotation speed, resulting into better drug entrapment and percent yield, was in the range of 1000-1250 r/min. In vitro cumulative % drug release from optimized SLN formulation was found 40-50 % in PBS (pH-7.4) and SGF (pH-1.2) respectively for 10 h. After 24 h more than 65 % of the drug was released from all formulations in both mediums meeting the requirement for drug delivery for prolong period of time.

Preparation, Characterization and Optimization of Irbesartan Loaded Solid Lipid Nanoparticles for Oral Delivery

2021 ◽  
pp. 97-104
Author(s):  
Kumara Swamy S ◽  
Ramesh Alli
Keyword(s):  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Oral Bioavailability ◽  
Oral Delivery ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Sustained Drug Release ◽  
Bioavailability Enhancement ◽  
Solid Lipid

The purpose of this study was to develop and evaluate irbesartan (IS) loaded solid lipid nanoparticles (SLNs; IS-SLNs) that might enhance the oral bioavailability of IS. IS, an angiotensin-receptor antagonist, used to treat hypertension. However, poor aqueous solubility and poor oral bioavailability has limited therapeutic applications of IS. Components of the SLNs include either of trimyristin/tripalmitin/tristearin/trilaurate/stearic acid/beeswax, and surfactants (Poloxamer 188 and soylecithin). The IS-SLNs were prepared by hot homogenization followed by ultrasonication method and evaluated for particle size, poly dispersity index (PDI), zeta potential (ZP), entrapment efficiency (EE), drug content and in vitro drug release. The physical stability of optimized formulation was studied at refrigerated and room temperature for two months. The optimized IS-SLN formulation (F4) had a mean diameter of about 217.6±3.62 nm, PDI of 0.163±0.032, ZP of -28.5±4.12, assay of 99.8±0.51 and EE of 93.68±2.47%. The formulation showed sustained drug release compared with control formulation over 24 h. Optimized formulation was found to be stable over two months. IS-SLN showed nearly spherical in shape using and converted to amorphous form by DSC. Thus, the results conclusively demonstrated SLNs could be considered as an alternative delivery system for the oral bioavailability enhancement of IS.

Development and Characterization of Binary Solid Lipid Nano Suspension of Atorvastatin: In-Vitro Drug Release and In-Vivo Pharmacokinetic Studies

2019 ◽  
Vol 11 (11) ◽  
pp. 1522-1530
Author(s):  
Mahwish Kamran ◽  
Mir Azam Khan ◽  
Muhammad Shafique ◽  
Maqsood ur Rehman ◽  
Waqar Ahmed ◽  
...  
Keyword(s):  
Drug Release ◽  
Oral Bioavailability ◽  
Drug Loading ◽  
Lipid Lowering ◽  
Diffusion Method ◽  
Pharmacokinetic Studies ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Solid Lipid

Atorvastatin is an extensively used lipid lowering agent. But the vital issue associated with it is low oral bioavailability (12%) owing to poor aqueous solubility. To overcome this tribulation, binary solid lipid nano suspension of Atorvastatin (ATO) was formulated by solvent diffusion method. The combination of stearic acid and oleic acid was utilized as a lipid carrier with Tween-80 (surfactant) along with Polyvinylpyrrolidone (co-surfactant). Optimized nano formulation was prepared by changing the formulation variables. Optimized nano suspension (ATO-4) represented particle size 228.3 ± 2.1 nm and polydispersity index (PDI) 0.225 ± 0.02 with zeta potential (ZP) – 33.6 ± 0.02 mV. Encapsulation efficiency along with drug loading capacity was 88.3 ± 2.5% and 4.9 ± 0.14% respectively. Scanning electron microscopic (SEM) analysis exposed spherical shaped amorphous particles. Differential scanning calorimetry (DSC) as well as X-ray powder diffraction (P-XRD) established reduction in drug's crystalline state. Fourier transform infrared (FTIR) spectroscopy exposed no interaction amongst the drug and formulation contents. In-vitro studies revealed sustained pattern of drug release. Stability studies confirmed refrigerated temperature as most suitable for storage of binary solid lipid nano suspension. Plasma concentration versus time curve ascertained 2.78-fold increase in oral bioavailability of ATO nano suspension compared to the marketed product (Lipitor®). Findings proposed desired improvement in oral bioavailability of ATO nano suspension with sustained drug release profile. Thus, binary solid lipid nano suspension could be utilized as an advanced drug delivery system for oral deliverance of hydrophobic drugs.

scholarly journals Effect of A 2-HP-β-Cyclodextrin Formulation on the Biological Transport and Delivery of Chemotherapeutic PLGA Nanoparticles

2020 ◽  
Author(s):  
Kangyu Zheng ◽  
Zeju Huang ◽  
Jiaying Huang ◽  
Xiangmei Liu ◽  
JUNFENG BAN ◽  
...  
Keyword(s):  
Drug Release ◽  
Cellular Uptake ◽  
Entrapment Efficiency ◽  
Plga Nanoparticles ◽  
Human Lung Cancer ◽  
Pharmacokinetic Analysis ◽  
Biological Transport ◽  
Sustained Drug Release

Abstract Background: The aim of this work was to develop a novel and feasible modification strategy by utilizing the supramolecular effect of 2-hydroxypropyl-beta-cyclodexrin (2-HP-β-CD) for enhancing the biological transport efficiency of paclitaxel (PTX)-loaded poly(lactide-co-glycolide)(PLGA) nanoparticles.Methods: PTX-loaded 2-HP-β-CD-modified PLGA nanoparticles (2-HP-β-CD/PLGA NPs) were prepared using the modified emulsion method. Nano-characteristics, drug release behavior, in vitro cytotoxicity, cellular uptake profiles and in vivo bio-behavior of the nanoparticles were then characterized. Results: Compared with the plain PLGA NPs, 2-HP-β-CD/PLGA NPs exhibited smaller particle sizes (151.03±1.36 nm), increased entrapment efficiency (~49.12% increase) and sustained drug release. When added to A549 human lung cancer cells, compared with PLGA NPs, 2-HP-β-CD/PLGA NPs exhibited higher cytotoxicity in MTT assays and improved cellular uptake efficiency. Pharmacokinetic analysis showed that the AUC value of 2-HP-β-CD/PLGA NPs was 2.4-fold higher than commercial Taxol® and 1.7-fold higher than plain PLGA NPs. In biodistribution assays, 2-HP-β-CD/PLGA NPs exhibited excellent stability in the circulation.Conclusions: The results of this study suggest that formulation contains 2-HP-β-CD can prolong PTX release, enhance drug transpot efficiency and serve as a potential tumor targeting system for PTX.

Synthesis, Characterization and in-vitro drug release studies of a macromolecular prodrug of Didanosine.

2010 ◽  
Vol 2 (2) ◽  
Author(s):  
Neeraj Agrawal ◽  
M.J. Chandrasekar ◽  
U.V. Sara ◽  
Rohini A.
Keyword(s):  
Drug Release ◽  
Drug Level ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Alkaline Environment ◽  
Stomach Acid ◽  
Release Studies ◽  
Macromolecular Prodrug

A macromolecular prodrug of didanosine (ddI) for oral administration was synthesized and evaluated for in-vitro drug release profile. Didanosine was first coupled to 2-hydroxy ethyl methacrylate (HEMA) through a succinic spacer to form HEMA-Suc-ddI monomeric conjugate which was subsequently polymerized to yield Poly(HEMA-Suc-ddI) conjugate. The structures of the synthesized compounds were characterized by FT-IR, Mass and 1H-NMR spectroscopy. The prodrug was subjected for in-vitro drug release studies in buffers of pH 1.2 and 7.4 mimicking the upper and lower GIT. The results showed that the drug release from the polymeric backbone takes place in a sustained manner over a period of 24 h and the amount of drug released was comparatively higher at pH 7.4 indicating that the drug release takes place predominantly at the alkaline environment of the lower GIT rather than at the acidic environment of the upper GIT. This pH dependent sustained drug release behavior of the prodrug may be capable of reducing the dose limiting toxicities by maintaining the plasma drug level within the therapeutic range and increasing t1/2 of ddI. Moreover, the bioavailability of the drug should be improved as the prodrug releases ddI predominantly in the alkaline environment which will reduce the degradation of ddI in the stomach acid.

Formulation and Evaluation of Chitosan-Polyaniline Nanocomposites for Controlled Release of Anticancer Drug Doxorubicin

2018 ◽  
Vol 8 (2) ◽  
Author(s):  
Dillip Kumar Behera ◽  
Kampal Mishra ◽  
Padmolochan Nayak
Keyword(s):  
Tensile Strength ◽  
Drug Release ◽  
Nanocomposite Films ◽  
Casting Method ◽  
Sustained Drug Release ◽  
In Vitro Drug Release ◽  
Clay Particles ◽  
Solution Casting Method ◽  
Nanoclay Content

In this present work, chitosan (CS) crosslink with polyaniline (PANI) with montmorilonite (MMT) called as (CSPANI/MMT) and CS crosslink with PANI without MMT called as (CS-PANI) were prepared by employing the solution casting method. Further the formation of nanocomposites CS-PANI/MMT and CS-PANI were investigated using XRD, FTIR, SEM and tensile strength. Water uptake and swelling ratio of the CS-PANI and CS-PANI/MMT were found to decrease with increase in concentration of clay. Mechanical properties of the CS-PANI and CS-PANI/MMT were assessed in terms of tensile strength and extensibility using texture analyzer. Increase in tensile strength and reduction in extensibility was reported with increase in the nanoclay content. In vitro drug release study on CS-PANI and CS-PANI/MMT indicated pronounced sustained release of doxorubicin by the incorporation of clay particles in the CS polymer matrix. Overall CSPANI/MMT nanocomposite films exhibited improved mechanical and sustained drug release properties than CS-PANI.

Solid Lipid Nanoparticles for Topical Delivery of Acitretin for the Treatment of Psoriasis by Design of Experiment

2020 ◽  
Vol 12 (2) ◽  
pp. 4474-4491
Author(s):  
Rajkumar Aland ◽  
Ganesan M ◽  
P. Rajeswara Rao ◽  
Bhikshapathi D. V. R. N.
Keyword(s):  
Particle Size ◽  
Drug Release ◽  
Solid Lipid Nanoparticles ◽  
Drug Loading ◽  
Entrapment Efficiency ◽  
Lipid Nanoparticles ◽  
Tem Analysis ◽  
In Vitro Drug Release ◽  
Solid Lipid

The main objective for this investigation is to develop and optimize the solid lipid nanoparticles formulation of acitretin for the effective drug delivery. Acitretin loaded SLNs were prepared by hot homogenization followed by the ultrasonication using Taguchi’s orthogonal array with eight parameters that could affect the particle size and entrapment efficiency. Based on the results from the analyses of the responses obtained from Taguchi design, three different independent variables including surfactant concentration (%), lipid to drug ratio (w/w) and sonication time (s) were selected for further investigation using central composite design. The  lipid Dynasan-116, surfactant poloxomer-188 and co surfactant egg lecithin resulted in better percent drug loading and evaluated for particle size, zeta potential, drug entrapment efficiency, in vitro drug release and stability. All parameters were found to be in an acceptable range. TEM analysis has demonstrated the presence of individual nanoparticles in spherical shape and the results were compatible with particle size measurements.  In vitro drug release of optimized SLN formulation (F2) was found to be 95.63 ± 1.52%, whereas pure drug release was 30.12 after 60 min and the major mechanism of drug release follows first order kinetics release data for optimized formulation (F2) with non-Fickian (anomalous) with a strong correlation coefficient (R2 = 0.94572) of Korsemeyer-Peppas model. The total drug content of acitretin gel formulation was found to 99.86 ± 0.012% and the diameter of gel formulation was 6.9 ± 0.021 cm and that of marketed gel was found to be 5.7 ± 0.06 cm, indicating better spreadability of SLN based gel formulation. The viscosity of gel formulation at 5 rpm was found to be 6.1 x 103 ± 0.4 x 103 cp. The release rate (flux) of acitretin across the membrane and excised skin differs significantly, which indicates about the barrier properties of skin. The flux value for SLN based gel formulation (182.754 ± 3.126 μg cm−2 h−1) was found to be higher than that for marketed gel (122.345 ± 4.786 μg cm−2 h−1). The higher flux and Kp values of SLN based gel suggest that it might be able to enter the skin easily as compared with marketed gel with an advantage of low interfacial tension of the emulsifier film that ensures an excellent contact to the skin. This topically oriented SLN based gel formulation could be useful in providing site-specific dermal treatment of psoriasis

Development and Optimization of Sustained Release Moxifloxacin Hydrochloride Loaded Nanoemulsion for Ophthalmic Drug Delivery: A 32 Factorial Design Approach

2020 ◽  
Vol 12 ◽  
Author(s):  
Sagar R. Pardeshi ◽  
Harshal A. Mistari ◽  
Rakhi S. Jain ◽  
Pankaj R. Pardeshi ◽  
Rahul L. Rajput ◽  
...  
Keyword(s):  
Drug Release ◽  
Sustained Release ◽  
Factorial Design ◽  
Water Solubility ◽  
Tween 80 ◽  
Drug Release Profile ◽  
Sustained Drug Release ◽  
Bacterial Conjunctivitis ◽  
Promising Alternative

Background: Moxifloxacin is a BCS class I drug used in the treatment of bacterial conjunctivitis and keratitis. Despite its high water solubility, it possesses limited bioavailability due to anatomical and physiological constraints associated with the eyes which required multiple administrations to achieve a therapeutic effect. Objective: In order to prolong drug release and to improve antibacterial efficacy for the treatment of bacterial keratitis and conjunctivitis, moxifloxacin loaded nanoemulsion was developed. Methods: The concentration of oil (oleic acid), surfactant (tween 80), and cosurfactant (propylene glycol) were optimized by employing a 3-level 2-factorial design of experiment for the development of nanoemulsion. The developed nanoemulsion was characterized by particle size distribution, viscosity, refractive index, pH, drug content and release, transmission electron microscopy (TEM), and antibacterial study. The compatibility of the drug with the excipients was accessed by Fourier transform infrared spectroscopy (FTIR). Result: The average globule size was found to be 198.20 nm. The TEM study reveals the globules were nearly spherical and are well distributed. In vitro drug release profile for nanoemulsion shown sustained drug release (60.12% at the end of 6 h) compared to drug solution, where complete drug released within 2 h. The antibacterial effectiveness of the drug-loaded nanoemulsion was improved against S. aureus compared with the marketed formulation. Conclusion: The formulated sustained release nanoemulsion could be a promising alternative to eye drop with improved patient compliance by minimizing dosing frequency with improved antibacterial activity.

scholarly journals Comparative Analysis of Morphological and Release Profiles in Ocular Implants of Acetazolamide Prepared by Electrospinning

Pharmaceutics ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 260
Author(s):  
Mariana Morais ◽  
Patrícia Coimbra ◽  
Maria Eugénia Pina
Keyword(s):  
Drug Release ◽  
In Vitro Release ◽  
Morbidity Rate ◽  
Coating Film ◽  
Sustained Drug Release ◽  
Coated Implant ◽  
Poly Ethylene ◽  
Coaxial Fibers ◽  
Release Profiles

The visual impairment that often leads to blindness causes a higher morbidity rate. The goal of this work is to create a novel biodegradable polymeric implant obtained from coaxial fibers containing the dispersed drug—acetazolamide—in order to achieve sustained drug release and increase patient compliance, which is of the highest importance. Firstly, during this work, uncoated implants were produced by electrospinning, and rolled in the shape of small cylinders that were composed of uniaxial and coaxial fibers with immobilized drug inside. The fibers were composed by PCL (poly ε-caprolactone) and Lutrol F127 (poly (oxyethylene-b-oxypropylene-b-oxyethylene)). The prepared implants exhibited a fast rate of drug release, which led to the preparation of new implants incorporating the same formulation but with an additional coating film prepared by solvent casting and comprising PCL and Lutrol F127 or PCL and Luwax EVA 3 ((poly (ethylene-co-vinyl acetate)). Implants were characterized and in vitro release profiles of acetazolamide were obtained in phosphate buffered saline (PBS) at 37 °C. The release profile of the acetazolamide from coated implant containing Luwax EVA 3 is considerably slower than what was observed in case of coated implants containing Lutrol F127, allowing a sustained release and an innovation relatively to other ocular drug delivery systems.

Sign in / Sign up

Export Citation Format

Share Document