scholarly journals Effects of Process Parameters on Structure and Properties of Melt-Blown Poly(Lactic Acid) Nonwovens for Skin Regeneration

2021 ◽  
Vol 12 (1) ◽  
pp. 16
Author(s):  
Ewa Dzierzkowska ◽  
Anna Scisłowska-Czarnecka ◽  
Marcin Kudzin ◽  
Maciej Boguń ◽  
Piotr Szatkowski ◽  
...  
Keyword(s):  
Air Temperature ◽  
Process Parameters ◽  
Cellular Response ◽  
3D Structure ◽  
Three Dimensional ◽  
Nonwoven Material ◽  
Processing Parameters ◽  
Skin Regeneration ◽  
Poly Lactic Acid ◽  
3D Scaffold

Skin regeneration requires a three-dimensional (3D) scaffold for cell adhesion, growth and proliferation. A type of the scaffold offering a 3D structure is a nonwoven material produced via a melt-blown technique. Process parameters of this technique can be adapted to improve the cellular response. Polylactic acid (PLA) was used to produce a nonwoven scaffold by a melt-blown technique. The key process parameters, i.e., the head and air temperature, were changed in the range from 180–270 °C to obtain eight different materials (MB1–MB8). The relationships between the process parameters, morphology, porosity, thermal properties and the cellular response were explored in this study. The mean fiber diameters ranged from 3 to 120 µm. The average material roughness values were between 47 and 160 µm, whereas the pore diameters ranged from 5 to 400 µm. The calorimetry thermograms revealed a correlation between the temperature parameters and crystallization. The response of keratinocytes and macrophages exhibited a higher cell viability on thicker fibers. The cell-scaffold interaction was observed via SEM after 7 days. This result proved that the features of melt-blown nonwoven scaffolds depended on the processing parameters, such as head temperature and air temperature. Thanks to examinations, the most suitable scaffolds for skin tissue regeneration were selected.

Selective Laser Foaming for Three-Dimensional Cell Culture on a Compact Disc

2015 ◽  
Author(s):  
JinGyu Ock ◽  
Wei Li
Keyword(s):  
Porous Structure ◽  
High Throughput ◽  
Drug Testing ◽  
3D Structure ◽  
Three Dimensional ◽  
Compact Disc ◽  
Laser Exposure ◽  
Porous Scaffolds ◽  
3D Scaffold ◽  
Tissue Model

A selective laser foaming process is developed to fabricate three-dimensional (3D) scaffold on a commercially available compact disc (CD) made of polycarbonate (PC). The laser-foamed 3D structure could be utilized to form high throughput perfusion-based tissue model device. In this study, effects of significant parameters and the morphology of porous structure were analyzed. As a result, laser foaming of gas saturated polycarbonate creates inverse cone-shaped wells with 3D porous structure on the surface region and the pores are tens of micrometers in diameter. The size of the well is dependent on the laser power and laser exposure time. The pore size relies on the gas concentration in the PC CD samples. The fabricated micro-scale porous scaffolds will be used to create centrifugal force driven two-chamber tissue model system arrays for high throughput drug testing.

scholarly journals Electrospun Three-Dimensional Nanofibrous Structure via Probe Arrays Inducing

Micromachines ◽  
2018 ◽  
Vol 9 (9) ◽  
pp. 427 ◽  
Author(s):  
Yifang Liu ◽  
Ruimin Liu ◽  
Xiang Wang ◽  
Jiaxin Jiang ◽  
Wenwang Li ◽  
...  
Keyword(s):  
Flow Rate ◽  
Applied Voltage ◽  
3D Structure ◽  
Three Dimensional ◽  
Development Trend ◽  
Processing Parameters ◽  
Industrial Applications ◽  
Nano Fabrication ◽  
Direct Printing ◽  
Deposition Area

The fast and precise direct-printing of micro three-dimensional (3D) structures is the important development trend for micro/nano fabrication technique. A novel method with probe arrays was built up to realize the controllable deposition of 3D electrospun nanofibrous structures. Firstly, several 3D nanofibrous structures were built on a single probe and 2-, 3-probes, which indicated that the probe height and probe interval played a key role on the 3D structure morphology. Then, different stereo nanofibrous structures based on multiprobe arrays were achieved accurately and the effects of processing parameters, including the probe height, probe interval, applied voltage and flow rate on the deposition behaviors of electrospun nanofiber over the probe arrays were investigated. The deposition area of 3D electrospun nanofibrous structures decreased with the increase of probe interval, applied voltage, and flow rate. Several 3D nanofibrous structures of special shapes including convex, triangle wave, inverted cone and complex curved surface were demonstrated by controlling the configuration of probe arrays and electrospinning parameters. This work provides an effective and simple way for the construction of 3D electrospun nanofibrous structures, which has great potentials in various medical and industrial applications.

Flow Analysis of a Porous Polymer-Based Three-Dimensional Cell Culture Device for Drug Screening

2018 ◽  
Author(s):  
Liang Ma ◽  
Lei Gao ◽  
Yichen Luo ◽  
Huayong Yang ◽  
Bin Zhang ◽  
...  
Keyword(s):  
Cell Culture ◽  
Shear Stress ◽  
Three Dimensional ◽  
Flow Simulation ◽  
3D Cell Culture ◽  
Porous Polymer ◽  
Poly Lactic Acid ◽  
Porous Scaffolds ◽  
3D Scaffold

A porous polymer-based three-dimensional (3D) cell culture device has been developed as an in vitro tissue model system for the cytotoxicity of anticancer drug test. The device had two chambers connected in tandem, each loaded with a 3D scaffold made of highly biocompatible poly (lactic acid) (PLA). Hepatoma cells (HepG2) and glioblastoma multiforme (GBM) cancer cells were cultured in the two separate porous scaffolds. A peristaltic pump was adopted to realize a perfusion cell culture. In this study, we focus on cell viability inside the 3D porous scaffolds under flow-induced shear stress effects. A flow simulation was conducted to predict the shear stress based on a realistic representation of the porous structure. The simulation results were correlated to the cell variability measurements at different flow rates. It is shown that the modeling approach presented in this paper can be useful for shear stress predication inside porous scaffolds and the computational fluid dynamics model can be an effective way to optimize the operation parameters of perfused 3D cell culture devices.

Microfabricated 3D Scaffolds for Tissue Engineering Applications

2004 ◽  
Vol 845 ◽  
Author(s):  
Alvaro Mata ◽  
Aaron J. Fleischman ◽  
Shuvo Roy
Keyword(s):  
Tissue Engineering ◽  
Motion Control ◽  
Surface Coverage ◽  
3D Structure ◽  
Three Dimensional ◽  
Porous Film ◽  
Pore Geometry ◽  
Pdms Mold ◽  
3D Scaffold ◽  
Multiple Levels

ABSTRACTMicrofabrication and soft lithographic techniques are combined to develop three-dimensional (3D) polydimethylsiloxane (PDMS) scaffolds comprising multiple levels of meandering pore geometry textured with 10 μm posts. Both micro-architecture and surface micro-textures have been shown to selectively stimulate cell and tissue behavior. To achieve a 3D scaffold with precise micro-architecture and surface micro-textures, 100 μm thick PDMS films were manufactured using a stacking technique to realize a 66% porous 3D structure with 200 × 400 μm horizontal through holes, 300 μm diameter vertical through holes and 71% surface coverage with 10 μm diameter and 10 μm high posts. Each PDMS porous film level was manufactured by the dual-sided molding of uncured PDMS between a three level SU-8 photoresist mold (of 200, 10, and 100 μm thick features) and a PDMS mold with 10 μm deep micro-textures. Dual-sided molding was achieved using a custom motion control mechanical jig that allowed relative mold alignment to within ∼ ±10 μm.

scholarly journals Effect of Icariin on Engineered 3D-Printed Porous Scaffolds for Cartilage Repair

Materials ◽  
2018 ◽  
Vol 11 (8) ◽  
pp. 1390 ◽  
Author(s):  
Ranjith Kankala ◽  
Feng-Jun Lu ◽  
Chen-Guang Liu ◽  
Shan-Shan Zhang ◽  
Ai-Zheng Chen ◽  
...  
Keyword(s):  
Laser Scanning ◽  
Three Dimensional ◽  
Processing Parameters ◽  
Confocal Laser ◽  
Cartilage Defects ◽  
Regeneration Ability ◽  
Porous Scaffolds ◽  
3D Scaffold ◽  
Good Surface

In recent times, cartilage defects have been the most common athletic injuries, often leading to dreadful consequences such as osteoarthritis, pain, joint deformities, and other symptoms. It is also evident that damage to articular cartilage is often difficult to recover or self-heal because of poor vascular, nervous, and lymphatic supplies. Moreover, cartilage cells have poor regeneration ability and high maturity. Inspired by these facts and the rapid advances in the field of tissue engineering (TE), we fabricated highly porous three-dimensional (3D) scaffold architectures based on cell-responsive polymeric inks, i.e., sodium alginate and gelatin (SA-Gel, 1:3 ratio), by a novel 3D printing method. Moreover, the effect of various processing parameters was systematically investigated. The printed scaffolds of polymer composites gels with excellent transparency, moderate viscosity, and excellent fluid properties showed good surface morphology, better thermal stability and swelling effect, and unique interconnected porous architectures at the optimized operating parameters. In vitro cell proliferation experiments of these cytocompatible scaffolds showed the excellent adhesion rate and growth behavior of chondrocytes. In addition, the porous architectures facilitated the efficient distribution of cells with only a few remaining on the surface, which was confirmed by confocal laser scanning microscopic (CLSM) observations. Icariin (ICA) addition at a concentration of 10 μg/mL further significantly enhanced the proliferation of chondrocytes. We envision that these cell-responsive polymeric inks in the presence of growth regulators like ICA may have potential in engineering complex tissue constructs toward diverse applications in TE.

Methods for three-dimensional reconstruction of cellular components within a thick section

1986 ◽  
Vol 44 ◽  
pp. 18-21
Author(s):  
J. Frank ◽  
B. F. McEwen ◽  
M. Radermacher ◽  
C. L. Rieder
Keyword(s):  
Tilt Angle ◽  
Tomographic Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Thick Section ◽  
Three Dimensional Reconstruction ◽  
Axis Ratio ◽  
Dimensional Reconstruction ◽  
Cellular Components

The tomographic reconstruction from multiple projections of cellular components, within a thick section, offers a way of visualizing and quantifying their three-dimensional (3D) structure. However, asymmetric objects require as many views from the widest tilt range as possible; otherwise the reconstruction may be uninterpretable. Even if not for geometric obstructions, the increasing pathway of electrons, as the tilt angle is increased, poses the ultimate upper limitation to the projection range. With the maximum tilt angle being fixed, the only way to improve the faithfulness of the reconstruction is by changing the mode of the tilting from single-axis to conical; a point within the object projected with a tilt angle of 60° and a full 360° azimuthal range is then reconstructed as a slightly elliptic (axis ratio 1.2 : 1) sphere.

Cryomicroscopy of crotoxin complex crystals at 400 KV

1989 ◽  
Vol 47 ◽  
pp. 826-827
Author(s):  
Jaap Brink ◽  
Wah Chiu
Keyword(s):  
Signal To Noise Ratio ◽  
3D Structure ◽  
Three Dimensional ◽  
Carbon Films ◽  
Depth Of Field ◽  
Basic Subunit ◽  
Ewald Sphere ◽  
Diffraction Patterns ◽  
Complex Crystals ◽  
Acidic Subunit

The crotoxin complex is a potent neurotoxin composed of a basic subunit (Mr = 12,000) and an acidic subunit (M = 10,000). The basic subunit possesses phospholipase activity whereas the acidic subunit shows no enzymatic activity at all. The complex's toxocity is expressed both pre- and post-synaptically. The crotoxin complex forms thin crystals suitable for electron crystallography. The crystals diffract up to 0.16 nm in the microscope, whereas images show reflections out to 0.39 nm2. Ultimate goal in this study is to obtain a three-dimensional (3D-) structure map of the protein around 0.3 nm resolution. Use of 100 keV electrons in this is limited; the unit cell's height c of 25.6 nm causes problems associated with multiple scattering, radiation damage, limited depth of field and a more pronounced Ewald sphere curvature. In general, they lead to projections of the unit cell, which at the desired resolution, cannot be interpreted following the weak-phase approximation. Circumventing this problem is possible through the use of 400 keV electrons. Although the overall contrast is lowered due to a smaller scattering cross-section, the signal-to-noise ratio of especially higher order reflections will improve due to a smaller contribution of inelastic scattering. We report here our preliminary results demonstrating the feasability of the data collection procedure at 400 kV.Crystals of crotoxin complex were prepared on carbon-covered holey-carbon films, quench frozen in liquid ethane, inserted into a Gatan 626 holder, transferred into a JEOL 4000EX electron microscope equipped with a pair of anticontaminators operating at −184°C and examined under low-dose conditions. Selected area electron diffraction patterns (EDP's) and images of the crystals were recorded at 400 kV and −167°C with dose levels of 5 and 9.5 electrons/Å, respectively.

Detection, Averaging, and 3D Reconstruction of Biological Specimens on Hypercubes (Transputer-based) Computers

1990 ◽  
Vol 48 (1) ◽  
pp. 454-455
Author(s):  
Jose-Maria Carazo ◽  
I. Benavides ◽  
S. Marco ◽  
J.L. Carrascosa ◽  
E.L. Zapata
Keyword(s):  
3D Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Software Tools ◽  
Mapping Method ◽  
Computer Architectures ◽  
Parallel Computer ◽  
Reconstruction Process ◽  
Computing Power ◽  
Order Of Magnitude

Obtaining the three-dimensional (3D) structure of negatively stained biological specimens at a resolution of, typically, 2 - 4 nm is becoming a relatively common practice in an increasing number of laboratories. A combination of new conceptual approaches, new software tools, and faster computers have made this situation possible. However, all these 3D reconstruction processes are quite computer intensive, and the middle term future is full of suggestions entailing an even greater need of computing power. Up to now all published 3D reconstructions in this field have been performed on conventional (sequential) computers, but it is a fact that new parallel computer architectures represent the potential of order-of-magnitude increases in computing power and should, therefore, be considered for their possible application in the most computing intensive tasks.We have studied both shared-memory-based computer architectures, like the BBN Butterfly, and local-memory-based architectures, mainly hypercubes implemented on transputers, where we have used the algorithmic mapping method proposed by Zapata el at. In this work we have developed the basic software tools needed to obtain a 3D reconstruction from non-crystalline specimens (“single particles”) using the so-called Random Conical Tilt Series Method. We start from a pair of images presenting the same field, first tilted (by ≃55°) and then untilted. It is then assumed that we can supply the system with the image of the particle we are looking for (ideally, a 2D average from a previous study) and with a matrix describing the geometrical relationships between the tilted and untilted fields (this step is now accomplished by interactively marking a few pairs of corresponding features in the two fields). From here on the 3D reconstruction process may be run automatically.

scholarly journals A Novel Pseudomonas geniculata AGE Family Epimerase/Isomerase and Its Application in d-Mannose Synthesis

Foods ◽  
2020 ◽  
Vol 9 (12) ◽  
pp. 1809
Author(s):  
Zhanzhi Liu ◽  
Ying Li ◽  
Jing Wu ◽  
Sheng Chen
Keyword(s):  
3D Structure ◽  
Three Dimensional ◽  
Optimal Temperature ◽  
Reaction Conditions ◽  
Enzymatic Production ◽  
Physiological Properties ◽  
Potential Applications ◽  
Kinetics Of ◽  
Optimal Reaction ◽  
Gene Age

d-mannose has exhibited excellent physiological properties in the food, pharmaceutical, and feed industries. Therefore, emerging attention has been applied to enzymatic production of d-mannose due to its advantage over chemical synthesis. The gene age of N-acetyl-d-glucosamine 2-epimerase family epimerase/isomerase (AGEase) derived from Pseudomonas geniculata was amplified, and the recombinant P. geniculata AGEase was characterized. The optimal temperature and pH of P. geniculata AGEase were 60 °C and 7.5, respectively. The Km, kcat, and kcat/Km of P. geniculata AGEase for d-mannose were 49.2 ± 8.5 mM, 476.3 ± 4.0 s−1, and 9.7 ± 0.5 s−1·mM−1, respectively. The recombinant P. geniculata AGEase was classified into the YihS enzyme subfamily in the AGE enzyme family by analyzing its substrate specificity and active center of the three-dimensional (3D) structure. Further studies on the kinetics of different substrates showed that the P. geniculata AGEase belongs to the d-mannose isomerase of the YihS enzyme. The P. geniculata AGEase catalyzed the synthesis of d-mannose with d-fructose as a substrate, and the conversion rate was as high as 39.3% with the d-mannose yield of 78.6 g·L−1 under optimal reaction conditions of 200 g·L−1d-fructose and 2.5 U·mL−1P. geniculata AGEase. This novel P. geniculata AGEase has potential applications in the industrial production of d-mannose.

scholarly journals Mechanical Behavior of Hydroxyapatite-Chitosan Composite: Effect of Processing Parameters

Minerals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 213
Author(s):  
Hamid Ait Said ◽  
Hassan Noukrati ◽  
Hicham Ben Youcef ◽  
Ayoub Bayoussef ◽  
Hassane Oudadesse ◽  
...  
Keyword(s):  
Molecular Weight ◽  
Compressive Strength ◽  
Mechanical Strength ◽  
Bone Repair ◽  
Mechanical Stability ◽  
Three Dimensional ◽  
Processing Parameters ◽  
Composite Effect ◽  
Solid Liquid ◽  
The Impact

Three-dimensional hydroxyapatite-chitosan (HA-CS) composites were formulated via solid-liquid technic and freeze-drying. The prepared composites had an apatitic nature, which was demonstrated by X-ray diffraction and Infrared spectroscopy analyses. The impact of the solid/liquid (S/L) ratio and the content and the molecular weight of the polymer on the composite mechanical strength was investigated. An increase in the S/L ratio from 0.5 to 1 resulted in an increase in the compressive strength for HA-CSL (CS low molecular weight: CSL) from 0.08 ± 0.02 to 1.95 ± 0.39 MPa and from 0.3 ± 0.06 to 2.40 ± 0.51 MPa for the HA-CSM (CS medium molecular weight: CSM). Moreover, the increase in the amount (1 to 5 wt%) and the molecular weight of the polymer increased the mechanical strength of the composite. The highest compressive strength value (up to 2.40 ± 0.51 MPa) was obtained for HA-CSM (5 wt% of CS) formulated at an S/L of 1. The dissolution tests of the HA-CS composites confirmed their cohesion and mechanical stability in an aqueous solution. Both polymer and apatite are assumed to work together, giving the synergism needed to make effective cylindrical composites, and could serve as a promising candidate for bone repair in the orthopedic field.

Sign in / Sign up

Export Citation Format

Share Document